If I buy a used Mac with Final Cut Pro and other software pre-installed, will they be updateable?

I want to buy a used Mac for video editing and there are alot of them with FCPX and other software already installed. If I buy one of these will I be able to do future updates to the software?

If they were downloaded from the Mac App store, no. In fact, the licenses are not transferable. Technically, it's not legal to sell you the machine with apps from the Mac App store still installed.

Similar Messages

  • How do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

    how do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

    First, did you use Setup or Migration Assistant? That can happen when coming from a PowerMac or sometimes even from another (Intel) Mac.
    Second, wait for the next version of Final Cut due very soon to ship (may have to wait for the ".1" of course to clean up any early issues.
    Final Cut Pro - Wikipedia
    There are a few apps that are better.  I think you can run multiple instances of Handbrake for one.
    I've read about and wanted to try PowerDirector 9 (Windows)
    PowerDirector 9 video software
    video editing software Wiki

  • How to use HDCAM with Final Cut Pro ?!?

    Hi How is it possible to digtise/setup for working with HDCAM in Final Cut Pro 6? I have tried going firewire but there isn't a codec available. I have looked up this and its because Sony are owners so don't want to share...blah blah. Another option I want to try is that at work I have an AJA Bridge is it?? Is it possible to use that along with my own setup in order to get the footage into my laptop. Any advice would be great. I would prefer to use this format for my project if possible...thanks
    Rich

    Hi Rich,
    Welcome to HD!
    HDCAM is not 'native' so you'll need a third party interface to convert the video signal. Check out p.398 in the manual.
    We use the BlackMagic card. But there are a number of cards and boxes out there that can get the job done....and yes, you do want to stay in the HDCAM format.
    Another way we do it, is to transfer the HDCAM shoot tapes to miniDV (correlating timecode and tape numbers of course) and then digitize the miniDV stuff in natively...much quicker and easier to work with while you're editing. Then ONLINE the cut using the BlackMagic card redigitizing in your Master HDCAM footage. This might help you get started sooner while you're ordering your card.
    Cheers,
    Susan.

  • Can I capture with Final Cut Pro and edit in Premiere Pro?

    Since it appears that Premiere has issues with capture - at least for me but as I see it for others as well - and that I can capture with iMovie, can I consider using Final Cut Pro for capture - then cross to Adobe Premiere and the suite for editing, finalizing ? Or is there a problem to copy the shots/files from one program to the other (would they remain identified clearly so I could just import shots into Premiere afterward ?)
    Thanks
    Rob

    Hi Rob,
    When you capture HDV in FCP it creates a specific Apple HDV codec. This is a codec that is only available if FCP, Motion or Compressor is installed.
    The two workarounds would be to use Premiere Pro on the Mac with one of the above mentioned apps installed on the same system or convert to a codec that can be read in Premiere.
    Best,
    Peter Garaway
    Adobe
    Premiere pro

  • Creating Blu-Ray DVD with Final Cut Pro and Adobe Encore

    Hi all,
    I am one of many with troubles creating a blu-ray DVD using Mac software. Sounds like the best way to do this is to do all of the editing in Final cut and create the DVD in Adobe Encore. Is there a way to export to Adobe Encore or should I just create a .mov file and import that to Encore. That way I think I lose the HD quality. I read that I could compress to Blu-ray format in Compressor, but I can only find HD DVD which is different. When I select create a Blu-Ray disc, Compressor won't simply create the file on my computer...it wants the disc to create.
    Maybe I am a little to new at this to fully understand, but why in the heck doesn't Apple get with the times and create a DVD authoring program that makes Blu-Ray?
    Thanks for any help you can offer.

    I have just completed my first blu-ray disc using FCP7 and Adobe encore. My workflow, once the timeline was complete, was to go to File>share>choose blu-ray as destination >export. The default encoding is H.264 along with an ac3 file for audio. It took 3 hours and 35 minutes to encode the 1hr 26 minute file.
    Opening encore, confirming you settings for HD, and choosing file>import>as asset each of the files (separately, of course). Encore imports them, then under Timeline>create new, then drag the files to the timeline. CLick on the build button and you are there. I did not mention that my original render was Prores422, but that should not matter here. No trouble with burning the Verbatim 25Gb disc.
    Encore will recognize that these files do not need re-encoding and burn the disc. It took 1 hour and 40 minutes to burn a 1 hour and 26 minute (17+ Gb) movie on an i7 iMac with an OWC 12x BD burner.
    Hope that helps

  • Round-tripping with Final Cut Pro and Soundtrack Pro problem

    I sent project to Soundtrack Pro for audio repair, everything works fine until I hit save, I get a message saying that it could not be saved. Doesn't say why. I have plenty space in my drives. Unit suggestions?
    Peter

    See the answer on your other thread.
    http://discussions.apple.com/thread.jspa?messageID=12426348#12426348
    x

  • Your experince with final cut pro vs adobe premiere?

    I am just wondering about your experience with final cut pro and adobe premiere and which you like better and why. Thank you.

    dorian86 wrote:
    I am just wondering about your experience with final cut pro and adobe premiere and which you like better and why.
    I've posted this in other threads here: I've tried the Final Cut Pro X 30 day trial on my old Mac Pro 5,1 (heavily modified) and my new Mac Pro 6,1 (8-core, D700s).  I have a specific benchmark that I run on an NLE when I'm testing it: how long does it take to export one of my movies to a 720p h.264 MP4?
    If we assume the length of the movie is represented by 't' (for time) -
    The old Mac Pro and Final Cut Pro X 10.0: 2t
    The new Mac Pro and new Final Cut Pro X 10.1: 1/2t + epsilon
    The old Mac Pro and Premiere Pro CC: 1/2t + epsilon
    The new Mac Pro and Premiere Pro CC: 1/2t - epsilon
    The newer version of Final Cut Pro X is substantially faster at exporting my movie than the older version.  But Premiere is still faster than it is.  Also, Apple still can't get the whole "edit the source footage raw" bit right; my source footage is all spanned-clip AVCHD, with files that are over 4G a piece.  FCPX can't just open those raw, it insists on putting a MOV wrapper around the footage.  There's no transcoding happening, but the file I/O for those massive files slows the whole process down significantly.
    Because I don't have years of experience editing with NLEs, I'm not married to any particular UI.  FCPX's UI is ... strange, but I didn't find it too difficult to become used to it.  If it were faster and more efficient for what I do, I'd reconsider it.  But for now, it's all Premiere.

  • How well will a 15.4-inch MacBook Pro 2.0GHz Quad-core Intel i7 work with Final Cut Pro X for video editing 4K

    How well will a 15.4-inch MacBook Pro 2.0GHz Quad-core Intel i7 work with Final Cut Pro X for video editing 4K

    It will work just fine. I would max out the RAM

  • Formatting a La Cie Rugged 1TB Esatadisk for Final Cut Pro and partitions?

    I have a brand new La Cie Rugged Xl 1TB hardisk and a La Cie Sata II Esata 34 Expresscardadapter.
    1.) How to format the drive to work best with Final Cut Pro and Prores HQ?
    2.) How many partitions is best for this 1TB disk?
    3.) Which tool to use for formatting and partitioning?

    Disk Utility's Repair Permissions only works on drives where all of the following circumstances apply:
    •The drive has a Mac OS X operating system installed.
    •The files to have their permissions repaired were placed there by the *Apple Installer* application.
    •A .pkg file or .bom folder was placed in the Library/Receipts directory by the Apple Installer application, containing permissions information pertaining to the file on the drive.
    Repair Permissions does not work on secondary drives or on files created by the user on any drive -including, but not limited to documents, video, photos and music.
    To avoid permissions issues on the drives that you will be using for video, do the following:
    •Right click the drive's icon on the Desktop or in the Finder's sidebar and choose *Get Info*.
    •Go to the bottom of the Get Info window and click the triangle next to *Sharing and Permissions* to open that section.
    •Click the lock and authenticate with an Administrator User name and password.
    •Activate the checkbox for *Ignore ownership on this volume*.
    Do not partition media drives, as already mentioned. There is absolutely no need to format a drive using anything other than Apple's Disk Utility application. You do not need to use LaCie's proprietary software to format a drive.

  • Buying a mac book pro to use with final cut pro

    does anyone have know what specifications I should be sure of before purchasing a laptop? I will be using it extensively with Final Cut Pro HD as well as many other programs
    thank you all as always...

    In addition to what Jerry and David said, if you have Final Cut Pro HD (4.5), you'll need to crossgrade to get the full benefits of your macbook pro.
    http://www.apple.com/universal/crossgrade/

  • I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

    i have the current Mac Pro the entry level with the default configuration   and i feel lack of  performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

    256GB SSD  it shipped with will run low and one of the things to watch.
    Default memory is 12GB  also something to think about.
    D500 and FCP-X 10.1+
    http://macperformanceguide.com/index_topics.html#MacPro2013Performance
    Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

  • How to get crisp jpeg images for slideshow on a Mac with Final Cut?

    Hi, I imported a large number of jpegs into Final Cut Pro and when I export to Quicktime Movie (not modifying the sequence size or settings I notice the quality of the jpeg images looks rather washed out and a bit fuzzy. The image dimensions of the jpegs are actually 2848 x 4272 and I was originally using a sequence setting of 720 by 480 (which scaled the images to about 12%). I experimented with doubling the sequence setting to 1440 by 960 and scaled the images to about 25.5% - still a bit washed out look.
    Basically this will be a presentation on a computer and output via projection. Looking for best possible and clearest photos. I experimented with iPhoto and when you play a slideshow it looks very crisp - this is what I am aiming for. When I export using the Slideshow export at the largest size 640 by 480 in iPhoto to quicktime - the quality seriously deteriorates.
    What would be the best way to maintain the crispness of the photos in Final Cut for an export to Quicktime that would be show on a Mac via a projector? Thank you

    Hi Nick, I do see information on creating a slideshow with Quicktime at: http://www.apple.com/quicktime/tutorials/slideshow.html
    however it appears Quicktime X removed that capability. There is no 'open image sequence' option from the File menu in Quicktime X.
    If I do end up sticking with Final Cut - would you recommend any codec and/or dimension size that would result in the best quality or the most crisp image? I also need a few fade in's and out's on various parts - I don't believe I would have the control without Final Cut.
    Would resizing the image files in Photoshop to 1920 pixels by 1280 before importing them into Final Cut result in crisper images? Thanks.

  • Whats the best blu-ray writer to use with final cut pro x

    Whats the best blu-ray writer to use with final cut pro x

    The Sea Tech Blu Ray Writer works great with my Mac.

  • Capture on PC/Edit on Mac with Final Cut?

    I travel and use a PC laptop.
    I need to know how to capture Mini DV video that will allow to edit them with Final Cut Pro 5.1 using my Power Mac G5.

    Depends how your PC captures the source media. If it captures as wmv you have a problem, if it captures as avi, it will +sort of+ work.
    Final Cut Pro works with QuickTime files and that's what you need to work productively.

  • Use other codecs like DivX or mainconcept with Final Cut Pro

    Hello,
    I'm trying to use DivX and/or the h.264 codecs from mainconcept with Final Cut Pro X (10.0.2). Both tries failed...
    Do I have to do something special to activate these codecs with Final Cut and Compressor?
    Thanks in advance
    Sascha

    Ok, but neither DivX or the codecs from mainconcept appear in Compressor. Reinstalled everything but had no luck...
    Can someone acknowledge that the DivX and Mainconcept codec ( http://www.mainconcept.com/products/apps-plug-ins/plug-ins-for-mac/movieexport.h tml ) are compatible with Final Cut Pro X?

Maybe you are looking for

  • Automated FTP of multiple files

    What's wrong with this picture: host='000.000.000.000' ftp -v $host << EOF cd backups lcd /Users/duane/Documents/backups/ftp_uploads mput * bye EOF It uploads one file then bails out. Main issue is that it keeps asking me: mput myfile2007_0430.tgz [a

  • How to change namespace in outbound file

    Hi, When I creates a outbound file using file adapter, BPEL or jDeveloper creates a file with its own namwspace like ns1: or ns15: or so on... But if I want to change it to my own tag say like tns: or its:, is it possible? example: the usual creation

  • Ping function in PL SQL

    Hello, I was trying to do a ping PL SQL function that I could use to check if a web service is up or not before querying. I found some examples and finally did the below, am getting ORA-00904 & cannot see what is wrong. Maybe someone out there could

  • Cursor Size

    I have a problem that when I startup my computer the cursor is large but is set in the preferences as being small. I can change it back to being small but the next time I shut down my computer and start it up again it is reset to being large. If anyo

  • New-page  issue in OOABAP Report

    Hi, I'm displaying a list in a grid using OOABAP Global classes. Could anyone please  post how to handle the New-page event in this case(In case of OOABAP Reports).