Formatting a La Cie Rugged 1TB Esatadisk for Final Cut Pro and partitions?

I have a brand new La Cie Rugged Xl 1TB hardisk and a La Cie Sata II Esata 34 Expresscardadapter.
1.) How to format the drive to work best with Final Cut Pro and Prores HQ?
2.) How many partitions is best for this 1TB disk?
3.) Which tool to use for formatting and partitioning?

Disk Utility's Repair Permissions only works on drives where all of the following circumstances apply:
•The drive has a Mac OS X operating system installed.
•The files to have their permissions repaired were placed there by the *Apple Installer* application.
•A .pkg file or .bom folder was placed in the Library/Receipts directory by the Apple Installer application, containing permissions information pertaining to the file on the drive.
Repair Permissions does not work on secondary drives or on files created by the user on any drive -including, but not limited to documents, video, photos and music.
To avoid permissions issues on the drives that you will be using for video, do the following:
•Right click the drive's icon on the Desktop or in the Finder's sidebar and choose *Get Info*.
•Go to the bottom of the Get Info window and click the triangle next to *Sharing and Permissions* to open that section.
•Click the lock and authenticate with an Administrator User name and password.
•Activate the checkbox for *Ignore ownership on this volume*.
Do not partition media drives, as already mentioned. There is absolutely no need to format a drive using anything other than Apple's Disk Utility application. You do not need to use LaCie's proprietary software to format a drive.

Similar Messages

  • Student Help advice! what is best iMac model for Final Cut Pro and logic pro

    Hi
    I am currently looking into getting a iMac, but is toggling to device if I need a 27inch or a 21inch(top model),which will be used for Final Cut Pro and logic
    There is a lot of money being invested iMac, and I really not want to be stu k with a computer that not going to keep up with the amount of work load in the future.
    The specs that I have on mine are..
    21inch 
    Upgrades include
    Sdd drive 512gb
    Intel core i7
    16gb of ram
    Or
    27 inch
    Upgrades
    Fusion drive or sdd 250gb
    Intel core i7
    (Possible graphic card) NVIDIA GeForce GTX 680MX 2GB GDDR5 [+ £105.60]
    (Ram is way to expensive so will buy from second party)
    Anyone who has brought a iMac for final cut or logic what would you likely buy?..Am really stuck on the hard drives between the 27inch fusion and 512gb on the 21inch
    My budget is £1900
    My fear is that the 21inch top model's graphic card may not be good enough for advance editing on Final Cut Pro In the future when I start to get more deep into editing..logic really only needs 8gb to run smoothly..buts its the final cut specs that am having problems deciding. I know iMacs are not future proof or technology lasts for that matter, but I do expect to have it run good for a number of years before I upgrade again.
    If anyone can give me some advice, or even tell me about there set up they have for media work please let me know.

    All kinds of things affect system & HD performance, I can't tell you why your 4 year old Mac is slow.  Just because your old Mac is slow doesn't mean that a new iMac will be equally slow.
    You are correct about the issue with the smaller fusion drives.  It's one of the reasons I am not high on recommending them.  Everyone thinks they want power & performance but don't understand the gap between marketing and real life performance.  The 1TB fusion drive however should give you a good combination of rapid access and sizeable storage capacity.
    I have used external FW800 / 7200rpm drives for years and have never had a problem with any of them.  I consider them very reliable but admittedly I DO NOT use consumer drives like the WD MyBook that the big-box stores sell.   For the most part I assemble my own with OWC Mercury Elite enclosures.  In the past few years I have centered on WD Caviar Black and WD Scorpio Black drives.  I also have some Seagate Barracuda 7200.xx drives.  They all perform excellently and reliably.
    Pls. refer to my earlier post for what i recommended to you.

  • USB or Firewire for Final Cut Pro and or Premiere Pro

    I have a macbook, and i need to do a crap load of final cut/ premiere rendering, and i need to get a external for the capture scratch and ect.
    But what i want to know is, what one to use? USB or Firewire 400,
    I was originally gonna get a LaCie Rugged, cuass its buss powered and extremely portable, but my friends told me, seeing ive got only one firewire port, im gonna have to get something like the 320gb o5 500gb LaCie, which has two firewires on the hard drive, although its not that portable.
    So i asked, why cant i get a USB external, that was a dumb thing to ask. They gave me reasons like USB speed isn't constant, not secure stuff like that.
    So what should i do, and which is the best one to get?
    Cheers
    Message was edited by: BlueDingo

    Don't know about PPro.
    For FCP, you really should have FW. The problem you'll run into, is that the Mac Book only has 1 FW bus. It doesn't matter how many ports the computer or external have, they will all run on the same FW bus. And I don't believe the MacBook has the capability of using an Express34 card (or any other FW expandability). I could be wrong, but don't think so.
    One solution is to capture directly to your internal harddrive, then copy the files over to the external FW drive. Others have posted about daisy-chaining your camera/deck through the external FW drive, but I've not done that and can't tell you how.
    Even capturing to the internal may not work, depending on what format you're capturing.
    Hang around for other possible solutions and search this forum for 'capturing to Mac Book' or some such language.
    K
    and yes, USB delivers content in packets vs. a continuous stream using FW. FW is the way to go. You might have success with USB, but you'll be lucky. Try to get FW 800 if you can.

  • WHAT IS THE BEST VIDEO CARD FOR FINAL CUT PRO and MOTION?

    Hello folks,
    I have found a lot of posts regarding all kinds of troubles with ATI READEON X1900 video card.
    When I talked to people from Apple, trying to decide which videocard to install in new MAC PRO, Ati Radeon X1900 was the one they did recommand for FCP and Motion. So are there any other cards which would actually suite better for Final Cut Studio2, or is Ati Radeon X1900 really the one to go with?
    Thanks for any suggestions,
    Kootenay

    Techreport has some more information on the new 55nm Radeon (X3000) which should be another "mid November" releases, as well as an updated 8800 GT that still is under wraps.
    So seems Intel and everyone else is trying to get new products out before the end of the year, if possible.
    Drivers for graphics controllers may or may not need the work that sometimes seems to plague companies.

  • Best Graphics backgrounds for final cut pro and g-5's

    I am not sure if this is the best place to post this but I was wondering if anyone could tell me what are some of the best graphics to use with final cut pro that work real well with a dual g5, this would be like quicktimes for backgrounds. I have had alot of people tell me after effects but then I am looking more for software that you dont have to build, I have been looking at Digital Juice and was wondering how well that works with final cut pro, are there any other High Quality graphics already put together, thanks for your help and if this is not posted in the right spot let me know where would be the place to post something like this. thanks

    New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
    If we use the forums properly they will work well...
    Patrick

  • 32 GB ram for final cut pro (and Afetr Effects)? Is it worth?

    Hello,
    and now it's the RAM time...
    I have to decide how much ram to buy, I work with Final Cut Pro, After Effects, Photoshop and, I hope, soon with Cinema 4D; this is the probabily Mac Pro configuration:
    - Two 2.8GHz Quad-Core Intel Xeon
    - Mac Pro RAID card
    - 4 SAS internal hard disks 300GB 15,000-rpm
    I'd like to expand it to 32 GB of ram, has it a sense or is it too much? Can 32GB RAM paradoxicalally slow it down? I heard too much RAM could be a problem...
    Thanks a lot,
    Stefano Bianchi

    Silal wrote:
    Hi
    FCP will not take advantage of more that 4 GB: Maximum memory usage in Final Cut Pro is 2.5 GB. Other FCS apps like Motion and Color will thanks you more RAM, but IMHO 32 GB is really too much, what means I cannot state you'll notice the difference.
    More RAM will help ypu on working with all your apps open at the same time making the system more responsive, but as I told you I think you can do it with less that 32 GB.
    Hope that helps !
      Alberto
    But Leopard on an Intel is 64 bit, right? So the article would not apply or has FCP not been updated for a 64 bit memory space?
    Robert:-)

  • Canon EOS MOVIE Plugin-E1 for Final Cut Pro Now Available...

    There's been so much talk about the 5D, 7D, 550D on this board that I'm going to point to the EOS MOVIE Plugin-E1 for Final Cut Pro. This is supposed to speed to transcode of Canon Camera H.264 to FCP-friendly formats and let you add more metadata along the way.
    Enjoy!
    Canon webpage. Under Drivers & Downloads. Once you select your OS, "Mac OS X", the download should appear near the top of the "Software" list.
    Note: (from Quickstart Guide)
    This plug-in software allows you to convert MOV movies shot with an EOS Digital camera into ProRes files at high speed in the (Log & Transfer) window of Apple's Final Cut Pro.
    FWIW: The quick start guide says cameras involved are 7D, 5D, 1D, no mention of 550D. Sort of odd.

    For users in North America to make the Canon EOS REBEL T2i work (550D for Europe):
    1. Install the new Canon EOS MOVIE Plugin-E1 for Final Cut Pro (http://www.usa.canon.com/consumer/co...nloadDetailAct)
    2. Go to Library/Application Support/ProApps/MIO/RAD/Plugins/CanonE1.RADPLug/Contents/Resources/
    2. Open up cameras.plist
    3. After the 7D info add the following lines of code (keeping to the coding structure):
    <key>T2i</key>
    <array>
    <string>Canon EOS REBEL T2i</string>
    </array>
    4. Save the text file. Close it. Everything should work now.
    Cheerz.

  • Following Media Files Are Not Optimized For Final Cut Pro

    I'm sure you've seen this before and I've tried to search for a thread on it here and fell asleep, so sorry if this is a repeat.
    I have edited projects in Premiere Pro (on my PC) and I have tried to transfer them in FCP. It worked with the exception of two things:
    1. the error message, "Following Media Files Are Not Optimized For Final Cut Pro"
    2. the quality *****! watching it on the playback in FCP it looks great, but then when I burn it to Disc it's pixelated in spots and generally has a lower quality picture.
    I know that it's Standard Def. and can't expect the best, but I've done it before (once or twice) and it didn't seem this bad.
    Can someone suggest anything to help the quality? Should I run my AVIs through MPEG Steamclip to make it a QT file and if so what is the best format in that since there are many to choose from and most I'm not familiar with?
    Thank you,
    Crayton

    I did compress them to DV NTSC then burned it to DVD and the result was no bueno.
    I thought what I would do is try compressing them again before I send them on over to DVDSPRO. Here is a simplified break down of the situation:
    - I have edited the raw footage in Premiere Pro on my PC. They were recorded and captured as SD.
    - I rendered them in Premiere, then transfered the rendered AVI file to FCP.
    - When went to place the files in FCP, I received the warning message; "Following Media Files Are Not Optimized For Final Cut Pro" but I went forward anyways and it allowed me to do so.
    - Originally I went ahead and compressed them from FCP to QT Movie as a DV NTSC, which ended up poorly.
    - Therefore my question is, should I compress them using another file type (other then DV NTSC)? Which leads me to another program that I have called MPEG Streamclip, which offers tons of file types of which I am unfamiliar with most. I want the best quality of course but don't know what file type is the highest going from AVI to a format that can be accepted by FCP and ultimately DVDSPRO. Keeping in mind that I only have FCP5 and do not have Prores.
    Did that make sense?
    Thank you again,
    Crayton

  • I need to buy a camcorder -- upgrading from a Flip. Which would you recommend as easiest to use with iMovie 11? Which for Final Cut Pro? Thanks!

    I need to buy a camcorder -- upgrading from a Flip. Which would you recommend as easiest to use with iMovie 11? Which for Final Cut Pro? Thanks!

    You can't run iMovie 11 on a PPC G5 running the old OS 10.3 Panther - which is what you say you have.
    iMovie 11 - cameras supported:
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    iMovie 9 - cameras supported:
    http://support.apple.com/kb/HT3290?viewlocale=en_US
    iMovie 8 Camcorders supported:
    http://support.apple.com/kb/HT1014
    Digital camera RAW formats supported by OS X Lion:
    http://support.apple.com/kb/HT4757?viewlocale=en_US
    Digital camera RAW formats supported by OS X Snow Leopard:
    http://support.apple.com/kb/HT3825?viewlocale=en_US

  • HELP! Convert .mts files for Final Cut Pro 6

    Please help!
    I am a broadcast/video production teacher in California and we are struggling.
    I just bought some Canon R10s to go with our F200s. We edit on FInal Cut Pro and we have 20 G5, PowerPC Macs.
    How do we convert the video so we can edit in Final Cut?
    I bought an MST converter. Log and transfer doesn't work (we don't have Intel computers), I have tried to change the sequence presets. Some things work, but converting takes forever, we have to render everything, Final Cut crashes, and the video will skip right before the frame starts.
    When using the MTS converter, we convert using the settings: h.264, 30fps, 1500 bit rate.
    What should we change? What can we do?
    We put together a weekly 20 minute show, and if this continues, I will start to lose the kids.
    Thanks for the help,
    Ben
    [email protected]

    Welcome to the forum,
    Okay, as a starting point, if you're running G5s, you DO NOT want to transcode to h.264 for editing with. It IS NOT a working codec, it is a delivery codec, and/or an acquisition codec for many cameras. H.264 has a complex algorithm and is built on the mpeg4 format.
    Without meaning to sound like a grumpy old man, the amount of times we see people on a daily basis coming to this forum with problems caused by editing in h.264, is just ridiculous.
    I reiterate; Do not edit in h.264. You will grind your computers to a halt, and be rendering forever.
    If you have the hard-drive space, you should transcode to ProRes and use that in FCP.

  • How to encode Panasonic HDC-TM700 footage for Final Cut Pro?

    How may I encode Panasonic HDC-TM700 footage for Final Cut Pro? It is 1080p/ 50 fps (in Europe)....

    I have not bought the camera yet so I cannot try. I have heard that the footage is not suppose to be supported that easily since it is 28 MBS "Avchd?" format. However people seem to be able to edit it in Imovie....

  • Where can I find a full manual for final cut pro 6?

    I'm trying to learn final cut because I haver an amature film making contest I'd like to enter and that would give me quite an edge, considering most of the intries will be using movie Could someone help me find a full manual or something that would assist in this indevor? I do only have final cut 6 because I am using my schools imac and that is ther vertion they have. so, can anyone help?

    You should ask your question in the Final Cut Studio forum.
    This forum is for Final Cut Pro X.

  • Can I add a secondary location for Final Cut Pro Documents?

    Hi Guys,
    I'm working on a large project which has taken up most of my 2tb hard drive which I use for my final cut pro documents (capture scratch, render files etc). Is it possible if I plug in another hard drive to use that as a secondary location for final cut pro documents as I have other (smaller) projects which I could be uploading and working on in the mean time? If so, how is this achieved and what are the pros / cons?

    Sure -- go to Final Cut Pro menu on your menu bar and select System Settings.
    The first tab is SCRATCH DISKS -- that's the term too -- not secondary folder for FCP Documents.
    Change it there.
    Drawbacks...
    It has been a while since I've had to deal with this, but FCP used to not remember (feature or bug??) a project's original scratch disk location and if you change it for ONE project it will be changed for ALL future AND past projects... until you change it back.
    Now, that in itself isn't a BAD thing. All that that means is that if you continue to capture material into that old project it will now put it over here instead of over there. Also, other things like render files and such which won't really matter much unless they do... and now you've got stuff spread over a coupla drives.
    FCP's projects don't care. They've already mapped where they need to go to get the video and render files it needs. Move your Scratch Disk 33 times... won't make a difference to the browser and timeline. -- UNTIL you remove one of the important drives. THEN red lines galore! Un renders, missing files... messy messy messy!
    Much better to start and finish a project in scratch disk. Makes for easy cleanup. Kinda like cooking thanksgiving dinner (American??) in 5 houses at once.
    Good luck,
    CaptM

  • NO image , just sound - also for Final Cut Pro users

    Hey everybody!!
    I am editing a movie on Final Cut Pro, and I use Quick Time 7.1 to capture the clips and source them to FCP. The type of recorder I am using is an HDV, and up to a couple of days ago, things ran smoothly.
    Then I started having problems with my Mac, of a different kind, and I had a friend of mine RESTORE my system. After that, I can't work on my film anymore, cause the Quick Time files from Capture Scratch only play sound, and have a blank screen. Every time I try to open them a window box appears, telling me that Quick Time is missing some components, and cannot play the clips properly. I tried downloading most of these programms, like Divx and On2, but the clips still can't play. I also tried erasing and re-installing Quick Time, but this doesn't seem to work either.
    I must have edited and delivered this video by tommorow, so what do I do??
    Please advise.
    Thanks.
    Stef.

    After that, I can't work on my film anymore, cause the Quick Time files from Capture Scratch only play sound, and have a blank screen.Sounds like you have "lost" your HD video component package. Try re-installing FCP (or specifically the HDV, AppleIntermediate, and/or DVCPRO HD components depending on "Easy Set-Up" option used for capture).

  • Which firewire interface for Final Cut Pro on MacPro?

    I currently own a Presonus Firepod, and it seems to work pretty well, but may sell this when I upgrade from a MacMini to a MacPro. I use my Mac for Logic Pro currently.
    I anticipate running Final Cut Pro in the near future, so I'm wondering about the ability to read/generate SMPTE time code that the MOTU traveller supplies?
    There will be no external mixer, so this interface will connect directly to speakers & headphones. (would be nice to be able to mute speakers and control headphone mix using just the firewire interface).
    I don't anticipate needing more than 2 Mic inputs - and my current mike is a Rode NT1. (As the NT1 is not a top-of-the-line mic, unsure if I should place a lot of emphasis on worrying about the pre-ams?)
    I would like decent mic preamps, and ability to graphically monitor input and output levels (is this graphic monitoring necessary, or is just the single overload indicator sufficient?).
    Which interfaces in $600-$1500 range would work best with Final Cut Pro - and Logic Pro?

    I saw the Traveller ads in Videography mentioning
    time code, so I presumed it had an advantage over
    other interfaces.
    I found this in some ad copy:
    """The Travler provides on-board SMPTE time code synchronization features that allow you to slave your Traveler system to SMPTE time code without a synchronizer. The Traveler provides a DSP-driven phase-lock engine with sophisticated filtering that provides fast lockup times and sub-frame accuracy. The included MOTU SMPTE Console software provides a complete set of tools to generate SMPTE for striping, regenerating or slaving other devices to the computer."""
    So it likely uses an audio port for timecode I/O. However, unless you have external equipment that you want to slave to Logic Pro, (or have Logic slave to) e.g. a timecode DAT, then this really is not necessary. FCP would not see the Travaller as a "controllable" device.
    For Final Cut Pro use, I'd probably shoot in HDV.
    When shooting a green screen near my computer (or
    maybe even on-site), I wondered if there would be an
    advantage to recording the audio thru an interface
    like the traveller.
    The advantage is that you could capture additional mics and audio tracks with your mac while the cameras shoot. Just slate your takes and sync up later.
    Do I actually need an interface that provides time
    code, or is that only needed for movie work?
    I have SMPTE I/O on my Unitor8, directly accessable in Logic Pro. In 8 years I've probably used it twice to capture audio from some modular digital multitracks. So, unless you have some specific need.....
    Maybe it is simpler just to connect to the mic
    directly to the camera's input?
    Indeed. You should always have camera audio available. Anything else is supplemental. Alternatively, you could use the Travaller or RME, etc. as a "live to camera" mixer in a studio situation. Plug your mics into the interface, create a submix and send it to the camera while simultaneously capturing each mic to an individual track in Logic Pro. There are many possibilities.
    G5 QuadPPC2.5, Ram:12.5g, Magma PCIe-PCI expansion   Mac OS X (10.4.8)   2X Hammerfall DSP Digiface+Multiface, Digi 002r, 4X UAD-1

Maybe you are looking for