If i'll run BF3 on my iMac 2010 21" 3.2 it will hurt him?

i have iMac 2010 21.5" (the bater one) with i3 3.2, HD5670 and WIN7 (bootcamp).
i want to runnig BF3 (not the best settings-720p/Med)
my imac can do it without getting hurt or somthing?
thank you

ok thank you.
and one more thing- do you know how much FPS it will on 720p - med?

Similar Messages

Running Mavericks on an iMac 2.7 GHz Intel Core i5, I've been trying to install Adobe CS3. All components install except InDesign. Is this an installation disk problem or is it not compatible with the OS?

Running Mavericks on an iMac 2.7 GHz Intel Core i5, I've been trying to install Adobe CS3 Design Premium. All components install except InDesign. Is this an installation disk problem, or is there a compatibility problem with the OS?

I fear that you are trying to download OLDER Software on a newer Operating Sysytem Meaning that you need to Install the Latest Version of Adobe on the Newer Operating System for it to work Properly. Be sure to always check the minimum System Requirements.

Need help. I am running a 27 in imac with 16 gigs of ram. Photoshop runs really fast, except when opening files. It takes 5-10 minutes to open even a small file of 1 meg. I cleaned and validated all the fonts and removed all questionable fonts. Reset pref

Need help. I am running a 27 in imac with 16 gigs of ram. Photoshop runs really fast, except when opening files. It takes 5-10 minutes to open even a small file of 1 meg. I cleaned and validated all the fonts and removed all questionable fonts. Reset preferences and still have problem. Slow to open and in force quit "Photoshop not responding" At this point should I uninstall and start over.

What are the performance Preferences?

Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd. Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart. Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows u

Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd.
Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart. Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows up on the desktop where I can then eject it.
I have checked and double checked the finder prefs and all looks normal showing a check mark on CDs,DVDs etc. (the ones I want to show up on the desktop)
I have reset the PEAM, repaired permissions with both the disk utility on the computer and the disk utility when I start up in the Recovery Disk. I did notice that sometimes the permission repeat the same correction several times before it moves on, and sometimes it doesn’t. I have Windows installed on a partition but I keep it unmounted until it is needed for my wife’s work. The dock seems to be just fine and all the apps seems to run just fine. When I insert a photo CD iPhoto does not open but when I insert a music CD iTunes does open.
Also, most every time I open iPhoto it takes a long time(sometimes as long as 2 minutes) for it to load.
Sometimes my Mail (Mail 5.3) does not post new mail but most of the time it does.
Once and a while it seems like the computer slows way down but then it seems ok ten minutes later.
All of these ‘things’ seemed to have happen suddenly and I have not downloaded anything from the internet in some time.
Of course the warranty and extended warranty are both no longer in effect having had this computer for more than three years.
I am running Java and Adobe Player because some of the sites I go to a lot require both.

I believe that insufficient RAM may be the source of some of your problems. If you have a RAM of somewhere 4 to 8GB, you will experience smoother computing. 3GB doesn't seem right, so you might want to learn more by going to this site:
http://www.crucial.com/store/drammemory.aspx
I don't know what know what's happening with your optical drive, but it seems you use your drive quite a bit. In that case, look into a lens cleaner for your machine. It's inexpensive, works quite well.
I hope you'll post here with your results!

I'm on Firefox 3.6.8 running on a 2008 IMAC with OS 10.5.8 yet every click to move pages, from start-up, to return to Home Page takes minutes, not seconds! If I use Safari that's greatly faster on this same set-up. How do I get Firefox to be as fast ?

I'm on Firefox 3.6.8 running on a 2008 IMAC with OS 10.5.8 yet every click to move pages, from start-up, to return to Home Page takes minutes, not seconds! If I use Safari that's greatly faster on this same set-up. How do I get Firefox to be as fast ?
== Some time back, beggining with Firefox updates, at least three, or more updates ago.

Thanks for the tip. I took the following steps:
1) Backed up the existing profile (presumably corrupted somewhere);
2) Deleted the existing profile;
3) Moved the existing Firefox to the Trash and downloaded a fresh copy;
4) Started Firefox (thus allowing it to create its default profile)
5) Copied the following files from the backup copy of the previous profile: places.sqlite, key3.db, signons.sqlite, permissions.sqlite, persdict.dat, cert8.db ---
I'm posting this from a Firefox browser, so I guess I'm OK now.

I just dont get it....battlefield 2 runs AWFUL on my imac 17"

I cant understand how everyone is saying how well battlefield 2 is running when on my imac its totaly unplayable. How can that be?
Im experiencing poor framerate and very very often the games just pausing as i turn around as if it cant process the information...when it does this the sound even pauses, its awful! To be honest even if I put graphics on full just to see what the senery looks like its still really poor.
Sorry I dont have much infor to give you but i think i installed it all right so I dont know what to say really!..anyone got any ideas as to why maybe it would run sooo badly on my imac when theres countless others reporting how good it is on their imacs?

I think that maybe the problem is with your windows and game software installation rather than the performance of the Mac. I have a 20" mac and I run Battlefield 2 on it without a problem with graphics features on full. I have now even tweaked the performance of the ATI X1600 from 400/400 mhz to 475/475 mhz for an extra 25% performance boost with no problems. Taking into account that Sim City 4 for the Mac is not universal binary then yes the performance will not be good but if a patch comes out that makes it universal then it should be okay. You are aware of the issues of performance for gaming with regard to the software being PPC or Universal ? This is due to the switch to Intel Chips and the fact that non intel universal coded games have to work in PPC emulation (Rossetta) hence the performance hit. Look for Universal binaries when running games as thats where you will get the best performance. As far as Battlefield 2 then thats a bonus to play that game in the first place as its running on Windows XP and its a Apple Mac after all!!! plus the fact that Bootcamp is BETA The current iMac's I feel represent the best value for money that apple has produced in a long long time.

HT3606 can i run icloud on a Imac G5 running Leopard 10.5.8

can i run icloud on a imac g5 running 10.5.8 ?

I have a 2004 imac g5 and I have been able to use iCloud.com on it. I have used it with Safari, WebKit, Tenfourfox and stainless browsers. I had the best experience in Tenfourfox, followed by WebKit. In Tenfourfox, I was able to use all iCloud apps including the beta versions of keynote, numbers and pages. Try it, you have nothing to loose but possibly making your old Mac more usable and relevant.

Mountain lion installer tells me that my Macintosh HD drive is not formatted to mac os extended, but I am running SL 10.6.8-iMac 2010

Thanks for any suggestions...iMac 2010 SL 10.6.8 trying to install ML 10.8.2 At the start of the installation(using downloaded installer from App Store) the installer advises that the Macintosh HD is not formatted as Moc OS Extended and directs me to aDisk Utility to do this .. surely this would format the drive and possibly do a Clean install ...which I not want to do..Is there a way to get round this issue?

Get a blank powered external drive equal too or slightly larger than your internal boot drive
Download a copy of Carbon Copy Cloner
Use Disk Utility to Erase the drive using the Middle Secure Erase selection and wait. until finished (may take hours)
Format the external drive Partition: 1, Option: GUID and Fomat: OS X Extended Journaled
Use CCC's default settings and clone your internal drive to the external one, may take hours.
When it's done, hold the option key down (wired or built in keyboard only) and reboot the computer, a screen pops up with bootable options, select the clone drive and check it out for some time.
Run Disk Utility from the clone and select the Macintosh HD partition and Partition: Format: OS X Extended Journaled and click apply, it likely will moan about this will delete all your data (it will)
Next click the Erase tab and use the middle secure erase option and click apply, wait it out again.
When that's finished use Carbon Copy Cloner to reverse clone the clone back onto the internal drive.
(note: in the future you can eliminate the secure erase steps and just click normal erase, as the bad sectors will have been already mapped off by the drive firmware)
Most commonly used backup methods

Flash movies run very slow on iMac

Hi,
Here is the problem I build this movie that redraws in small
squares an image, each square represents a color on the same
position as the original image, so you will get that pixelation
look, so this squares are created using a TimerEvent at a 1
millisecond, when I run this on a iMac (2.8GHz) the Timer doenst
run at 1 millisecond looks like run at 1 sec, but when I publish
the same .fla on a PC, it runs very fast.
Any ideas?
Thanks
rS

Hi,
Here is the problem I build this movie that redraws in small
squares an image, each square represents a color on the same
position as the original image, so you will get that pixelation
look, so this squares are created using a TimerEvent at a 1
millisecond, when I run this on a iMac (2.8GHz) the Timer doenst
run at 1 millisecond looks like run at 1 sec, but when I publish
the same .fla on a PC, it runs very fast.
Any ideas?
Thanks
rS

I just got InDesign CS6 and am running it on an iMac and I know the license is good for two computers which will come in very handy for me. How do I set it up to access it from my second iMac?

I just got InDesign CS6 and am running it on an iMac and I know the license is good for two computers which will come in very handy for me. How do I set it up to access it from my second iMac?

I just had an afterthought, Peter, if I could bother you further; if the downstairs iMac that I want to access it from is in my wife's name and not mine (even though I'll be the one using it on her computer) does that affect anything or can I simply load the software straight into her computer without any complications?

I am running 10.8 and setup airport extreme to run music from my imac to my receiver in the other room. When I open sound from system preferences, I don't see an external device to choose, other then internal speakers. Any ideas?

I am running 10.8 and setup airport extreme to run music from my imac to my receiver in the other room. When I open sound from system preferences, I don't see an external device to choose, other then internal speakers. Any ideas?

Airport Express (the small Airport device, which is the only one with an audio connection) works through Airtunes, which only works with iTunes. The computer won't send ALL system sound to the Airport. If you actually want to send sound outside of iTunes, use Airfoil.
Matt

PROS and CONS of running FCP on NEW iMACS?

Hi gang...
It's a sad day -- I've been running fcp 5.1.4 using Tiger on my PowerMac G5 (dual core 2.3GHz, 2.5GB of memory) for years now -- few real problems besides operator error.
All has been good.
Along comes a client shooting XDCAM footage and suddenly I'm feeling VERY behind the times. I'm unable to edit with this codec since it's not compatible with fcp 5.0. And since my G5 is pre-Intel processor, I'm unable to upgrade to fcp 6 or higher (is this accurate?)
So what are the pros and cons of purchasing one of the new iMacs to run fcp 7? Although my G5 was installed with a DeckLink card, I never did any external monitoring using an NTSC monitor. Most of the stuff I'm doing is long form programming, straight cuts/dissolves, minimal graphics. I'm creating alot of content for the web, delivering some (non-broadcast) masters on dvd.
Do the iMacs have external monitoring capabilities? (I'm under the impression they don't)
Am I really at the point where I need to purchase new hardware? (I've been so happy with my G5.)
What will be my minimum investment, and is the Macmini ($599) a viable option?
And finally, does Joni love Chachi?
Thanks

FCS3 (FCP7) is only supported on intel processors. FCS2 (FCP6) runs fine on G5s.
iMacs do not have external monitoring capabilities beyond using firewire out for DV. I don't know how the mini-dvi port works with something like the original Matrox MXO. It may work fine.
Still, there is no way to hook up esata drives, replace the video card with something that supports Motion or Color or add any one of dozens of nifty bells and whistles.
The mac mini is a poor choice. Lousy graphics support and NO expansion capabilities.
Get a MacPro.
x

Run musicmatch on my imac

Hi
I am wondering how to run musicmatch on my imac.The wondows verson is the only one that supports the on demand service, and I need to be able to easly run it in tandem with OS X. I have tried darwine, but that doesnt seem to work.
Any sugestions?
Thanks

If you have a Intel Mac you should run windows with Parallel Desktop.

What older versions of PS Elements are compatible with my older iMac?? I'd like to upgrade to an newer version (eg. versions 7-10) that will run on my old iMac. Some versions are PC only.

What older versions of PS Elements are compatible with my older iMac?? I'd like to upgrade to an newer version (eg. versions 7-10) that will run on my old iMac. Some versions are PC only.

And which model imac? Is it a G5 processor or Intel?

FCPX runs poorly on my iMac

I am running FCPX on an iMac 3.06 Intel Core 2 Duo, 14MB of ram, OSX 10.6.8 and it runs very sluggish...choppy skimming and if I preview the video the audio is fine but the picture is very jumpy. Any suggestions?F

I am assumming you meant 14GB of RAM ... Anyway, is the background processor busy? If so, click on it and see what it's doing in the background. If you have imported a lot of files, and have set the preferences to convert to optimized media, you could be doing that background work for many hours even. During that time, it is quite common to have choppy or sluggish video or editing. Audio requires far less processing and resouces than video so it does not surprise me that the audio can still play. Try to let it get all the way to 100% in the background processing if that is what it's doing then see what happens. If you still have the brownish-orange bar above some of your clips in the timeline, then there are things that are still not rendered and that will also require background processing. Sorry if you know all this already. I never know the experience level of the folks on the forum. Just trying to help a little. Best wishes.
stephen

If i'll run BF3 on my iMac 2010 21" 3.2 it will hurt him?

Similar Messages

Maybe you are looking for