If I'm installing a PC-6221 board to work with Labview 7, do I need to get anything else with it if my connector I have right now is 50 pins to go with my old PC-1200 board?

What other specific things would I need?
Thanks

Hey,
Thanks for the reply.  Before I buy the PC-6221 board, a new cable, and a new to go along with it, I was just wondering if there was a way for me to use 50 pins from my PC-1200 board.  I have three laying around, so I was wondering if there was a way to use them to make a 68-pin one.  This is probably not likely, but any suggestions would be great.  Thanks again for the reply, and you understood what I was trying to ask.
Take it easy,
Ryan

Similar Messages

  • What software works with the old 7290

    I just want to move pictures and ringtones back and forth from my computer to my old 7290 and for the life of me I can't figure out which software works with this old model. I have tried several of the newer applications offered by RIM but none of them weem to work with this older model. Any ideas?

    You should be able to 'see' the BlackBerry memory in the Meida Manager, and you can transfer small files to the Content Store on the BlackBerry using the Media Manager. Just remember that you are using the base memory on the BlackBerry for media files and you shouldn't get too crazy with files transferred to it. 
    Try installing v4.2 Service Pack 2 and using the Media Manager and seeing if the BlackBerry device memory option shows up at the bottom of the screen. When you open the memory you should see some file folders and you should store the files directly into the file folder appropriate to the media, and not use folders inside the original folder so the BB will 'see' the files when you use your Profile options to select ringtones or background photos.   

  • I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

    I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

    Hi, M_ghaderi.  
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • Hi, I have an iTunes account on my laptop set up to work with my old iPod. I now have an iPad and new iPod but set up under a different account- can I put all the songs from my iTunes onto the new devices. Thanks.

    Hi, I have an iTunes account on my laptop set up to work with my old iPod. I now have an iPad and new iPod but set up under a different account- can I put all the songs from my iTunes onto the new devices. Thanks.

    Yes
    Put all the music on one computer, make sure it is authorized for all accounts, sync.

  • Macbook pro is not working with Canon pixma iP1500, but has previously.  The printer works with an old PC without trouble.  "printer is offline" message when this printer is plugged into macbook.  Any clues to get it to work?

    Macbook pro is not working with Canon pixma iP1500 but has previously.  Printer works with an old PC but macbook shows "printer is offline".  Any clues?

    Hello Betty7,
    Please let me take a moment to say "Welcome" to the HP Forums.
    I hope you enjoy your experience!
    I see that you are having an issue with getting the printer reinstalled. 
    I suggest that we start off by running the HP Print and Scan Doctor.  If the Doctor fails, please let me know where it fails as well as any error codes it may generate.
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I upgraded to Mountain lion. I could not open any of my word documents so i downloaded Libre Office. It is downloaded but how do I get it to work with my old documents??

    I upgraded to Mountain lion. I could not open any of my word documents so i downloaded Libre Office. It is downloaded but how do I get it to work with my old documents??

    I don't know what file formats LibreOffice supports, but my guess is it can only handle the OpenXML format (new Office docs).
    You could use this online converter: http://www.zamzar.com/convert/doc-to-docx/

  • I'm using the Internet Personal Ancestral File Family Search but I'd like to work with the old version. Could you help me how to use it? Thank you

    I was working with the old version of Family Search Personal Ancestral File through Internet but I cannot deal with the new version which uses Firefox. Could you help me to work with the old version? Thank you

    Junho wrote:
    However, in Numbers, I cannot do the same thing with same procedure..
    What should i do to get all of those 4 at the same time?
    Please let me know..Thank you!
    First, be aware that Numbers is not MS Excel, and Excel is not Numbers. Features available in one of these two applications are not necessarily available in the other.
    LINEST in Numbers works somewhat differently from what you describe. The function is well described in the "iWork Formulas and Functions Help" document, available through the Help menu.
    I'd start there, with a search for LINEST.
    Regards,
    Barry

  • Will nokia 301 work with the old PC suite?

    Hi,
    I am planning to buy Nokia 301(Dual sim varient),
    i am more concerned about Nokia PC suite connectivity over blue tooth (PC suite -(v.7.1.180.94) and Not Nokia suite).
    Can you please tell will nokia 301 work with the old PC suite or not.?
    and btw is your Nokia 301 a dual sim variant or single sim ?
    Moderator's note: We have amended the title of this post and its replies as they were moved from another thread.

    noreport wrote:
    Will Nokia 301 work with the old PC Suite?
    Yes. For details, there you go …

  • I have just brought a new ipod and it won't work with my old imac as it is running pre 10.5 software. I can't upgrade the software, so what should I do?

    I have just brought a new ipod and it won't work with my old imac as it is running pre 10.5 software. I can't upgrade the software, so what should I do?

    There is nothing to do, unless you buy a new computer.
    Mac OS 10.5.8 or later is required.

  • Does the new version of lightroom work with an old CS5 photoshop?

    Does the new version of Lightroom work with an old CS5 photoshop?

    Yes - they will work together.
    However, the Camera Raw versions will not match - meaning you may have to render your file into a tiff to bake-in your LR Settings before passing the file to PS CS5,

  • I have an IPod Touch that is disabled. I can't connect it to ITunes becaus e the computer I synced it with cannot be used. How do I sync it to the computer I have right now?

         I have an IPod Touch that is disabled. I can't connect it to ITunes because the computer I synced it with cannot be used. How do I sync it to the computer I have right now without using the old one?

    polaricee1319 wrote:
         I have an IPod Touch that is disabled. ...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have it resolved... have a look at this link...
    http://support.apple.com/kb/ht1766

  • After editing the iisproxy.ini with a differnet IP address do I need to do anything else?

    I changed the iispoxy.ini file on MS ISS server to point to a new
    weblogig server ip address but I get a timeout error when trying
    to proxey to the new server.
    Do i need to do anything else to the server to make this connection
    work.

    Hi Joe,
    The encoded assets are imbedded inside your iDVD project package. When you updated your footage, did iDVD detect the asset change and ask you to update the project? If it didn't, it might not have re-encoded some of your DVD footage. You should preview your disk image with Apple DVD Player to be sure. The encoded assets can be deleted with the Advanced > Delete Encoded Assets menu command and save your project.

  • Hi, i need to cancel adobe membership, i am having a free trial thing right now, but after a while it will renew automatically to a monthly fee, which i don't want to deal with, so would like to cancel it right now

    Hi, i need to cancel adobe membership, i am having a free trial thing right now, but after a while it will renew automatically to a monthly fee, which i don't want to deal with, so would like to cancel it right now

    This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
    -cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -or http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Can a nano work with an old imac w/o os x?

    i have a very old imac and was wondering if it's possible to transfer songs i've burned from cds onto the ipod nano without using itunes? the imac's so old, i don't think it can, nor do i want to, install os x on it, and i read itunes can only work with os x.
    i realize i can't buy music using itunes, but can i drop songs into it? thanks.

    If I am not mistaken you can not add music to the nano as some users have stated once used to be possible with older iPods. Even if you have no intention of purchasing music via iTunes it seems to be the only way to manage your ipod unless you are using it solely as a disk drive and not as player. There may be some third party softwares out there that allow such use, but I would not know.

  • Will iTunes work with an old IBM Thinkpad and Windows 2000?

    I am trying to set up my daughter's old ThinkPad 380XD so she can use it with her new iPod Nano. I have loaded Windows 2000 SP 4, with the latest MS updates. I have tried the iTunes setup that came on the CD with the iPod as well as downloading iTunes from the Apple website.
    I have been able to get both iTunes and QuickTime installed and can launch QuickTime ok. When I try to launch iTunes, I get a message that says "iTunes.exe has generated errors and will be closed by Windows. You will need to restart the program. An error log is being created." When I check the event log, I do not find any entries that match the time or description of the iTunes message.
    I have looked at previous posts for this problem and do not see a clear solution except to disable firewalls or anti virus programs. I don't have either operating but I do see that I only have 32Meg of RAM and iTunes would like 128Meg. Is this the cause of the problem and would it affect iTunes and not QuickTime? If RAM is the problem, is there any solution other than increasing the physical RAM?
    Thanks in advance.
      Windows 2000  

    Sorry, no. You would have to have 2000 at least to be compatible.
    Also, iTunes will not work without QT, as QT is the playback software used by iTunes.
    Message was edited by: StarDeb55

Maybe you are looking for