If there is any restriction for procedure input parameter

Hello expert,
I create a oracle precedure, with a input parameter, but when I used this procedure in SAP BO, it showed following error message:
" a database error occured. the database error text is : cannot parse the stored procedure query: unable to parse stored procedure specification . (WIS 10901)"
I found if I input a value for this parameter including '&', above error displayed.
so , will you please tell me if there is any restriction for procedure input parameter?
Many Thanks,

843178 wrote:
I create a oracle precedure, with a input parameter, but when I used this procedure in SAP BO, it showed following error message:
" a database error occured. the database error text is : cannot parse the stored procedure query: unable to parse stored procedure specification . (WIS 10901)" This is not an Oracle error message. Such a message will have an ORA error code (or PLS code). Neither can stored procedures be executed as queries. They need to be executed via anonymous PL/SQL code blocks.
So from the sounds of it, the problem in your case is that the PL/SQL procedure call is incorrectly made.
Calling a PL/SQL procedure needs 2 basic things:
- make the call code using an anonymous PL/SQL code block
- use bind variables for passing input and output parameters

Similar Messages

There si any trouble when I input Chinese to the JTextField in Applet.

There si any trouble when I input Chinese to the JTextField in Applet.

thanks for your help,
my tool is form builder,
my form version is 10.1.2.0.2
and the field is set to CHAR ,
when i run an easy form
and switch the input method to chinese,
there is no input window,the focus directly be in field, even doesn't complete input a Chinese character,
in usually ,when switch the input to chinese,the focus will be in field when complete input a Chinese character
i Try to do it in version is 9.0， there isn't wrong As above
any one can tell me how to resolve it ,thanks

Do the fonts in Photoshop CS4 have any restrictions for commercial use?

I am a designer and I wanted to know if there were any restrictions in the Photoshop CS4 Extended version concerning font usage? I have read all the terms but I got confused after awhile. I wanted to make sure there are no restricted usage if I use any of the fonts incorporated into my designs which are then resold? Thank you in advance!

Thank you for your response. Just to be clear: essentially I can use the fonts in my designs for say cell phone skins and music album covers but cannot not ( of course) resell the original fonts correct? Thanks again for your help! I have tried calling and been on hold forever, then tried emailing support and they said I had to call because it is a technical issue. Lawyer speak in the terms confuses me easily:)

Although I have been using Google Maps App in India for a while now (without any issues) but I still want to know if there are any plans for launching Turn by Turn Navigation under the OOTB Map App for iOS?

Although I have been using Google Maps App in India for a while now (without any issues) but I still want to know if there are any plans for launching Turn by Turn Navigation under the OOTB Map App for iOS?
It has been quite a while since Apple came up with Map App of their own and should be releasing improved maps with more capabilities in India.
Cheers!
Abhishek

No one here can answer your question, as there is no one from Apple here, & no one here represents Apple or speaks for Apple.

I have bought OSX Lion 1 month back, and now new OS is getting released, there will any updates for the OSX with new features or I have again buy it paying $20, Please let me know??

I have bought OSX Lion 1 month back paying $29.99, and now new OS is getting released, there will any updates for the OSX Lion with new features or I have to again buy it paying $19.99, Please let me know??

http://www.apple.com/osx/uptodate/

In SMO there is any option for run both ExecuteNonQuery and ExecuteWithResults.?

In SMO there is any option for run both ExecuteNonQuery and ExecuteWithResults query at simultaneously?

Hello,
First, in a client session nothing can run "simultaneously", all statements are executed in sequence. And what should
it be good for to run ExecuteNonQuery +
ExecuteWithResults; both executes the SQL batch, the only difference is, ExecuteWithResults returns a result?
But if you like, start one by one.
Olaf Helper
[ Blog] [ Xing] [ MVP]

There is any ETA for Siri in Hebrew?

There is any ETA for Siri in Hebrew?

Nobody here can tell you anything about Apple's plans to add new features. But you can ask for them via
http://www.apple.com/feedback

If SIRI works on iphone 4? if there is any way for ask using iphone 4 can have this application? just let ask know if will work or not, because if not so we will not think about it. please somebody answer my question

if SIRI application works on iphone 4? if there is any way for ask using iphone 4 can have this application? just let ask know if will work or not, because if not so we will not think about it. please somebody answer my question. my iphone 4 are already update for iOS 5. I'm searching in the internet forum some are saying that it's only work if your iphone are jelbreak, and the problem is i don't want my iphone to be jelbreak. thanks for reading my question. and please send the question on my email many thanks....
<Email Edited by Host>

What else is there? There's Siri, A5 chip, 8MP camera, intelligent switching between antennas. Those are the only new things in the 4S. Like I said, if Siri was on the 4, fewer would buy the 4S. Second, the 4 is discontinued to make room for the 4S, so there will be no updates exclusively for the 4. Third, I never trust any reports on the Internet unless it comes directly from the company (in this case, Apple).

If i buy an apple product from the actual customer who bought it, and i face some problem with it, but the device is still under warranty, so would there be any issue for getting the device checked?

If i buy an apple product from the actual customer who bought it, and i face some problem with it, but the device is still under warranty, so would there be any issue for getting the device checked?

If you make an appointment at the Genius Bar about a problem, they will check and evaluate the device, and if it warrants a replacement under warranty, they make the final determination. We are users here. This is a user to user support forum. We cannot determine what Apple will do. I can tell you what I already did, the warranty follows the device.

Is there is any scope for improvement in rollup times by using Basis Aggr

Hello All,
Appreciate if you could let me know Is there is any scope for improvement in rollup times by using Basis Aggregates?
Thanks.

Hi,
Go through the links below , It may help you
http://wiki.sdn.sap.com/wiki/display/BI/Aggregates--SAPBWQueryPerformance
http://help.sap.com/saphelp_nw70/helpdata/EN/9a/33853bbc188f2be10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/c5/40813b680c250fe10000000a114084/content.htm
http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417700)ID0168391950DB10940851676120293872End?rid=/library/uuid/3a699d90-0201-0010-bc99-d5c0e3a2c87b&overridelayout=true
http://sap.seo-gym.com/performance%20tuning%20for%20queries.pdf
Regards,
Marasa.

There is any aupdate for macbook air 13" mid 2009 trackpad {with one long click button down} to help trackpad working fine with loin mac os x 10.7.1

there is any aupdate for macbook air 13" mid 2009 trackpad {with one long click button down}
to help trackpad working fine with loin mac os x 10.7.1

mohammedfromad dammam wrote:
there is any aupdate for macbook air 13" mid 2009 trackpad {with one long click button down}
to help trackpad working fine with loin mac os x 10.7.1
Not at this time. It would also be great to have an adjustment for sensitivity too.

Is there any restriction for the types of components in a tool bar.

Hi, i'm using a tool bar where i'm having different command buttons and an "<af:inputFile>" component.
In one of the command button i'm having "<af:setPropertyListener>" component. This command button is not being used as a partial trigger by any other component. If i invoke this button i'm getting "Assertion failed:Incorrect use of AdfRichUIPeer.GetDomNodeForCommentComponent" error.
if i remove the either the "<af:inputFile>" or the command button having "<af:setPropertyListener>" from the tool bar then there is no such error.
is there any restriction to use different components in a tool bar. Please clarify me . Thanks.

Thanks for your inputs. But non of the component using the attributes "rendered". And non of the components is being partial trigger for other components. Please let me know what else could be the cause. Thanks.

There is any restriction on max quantity of queues?

Hi, i work in a large gps tracking company.
We are rebuilding our software and looking into msmq to storage the coordinates to be processed.
The problem is, each tracker unit need to be isolated in on queue and we have 500k+ trackers online, so, we need tons of queues.
Im worried about performance.
Does msmq has any restriction on max quantity of queues?
How much memory each queue consume when they are idle and when have connections? (beanstalk +/- 300bytes, rabbitmq 30kb,...)
There is any way to use msmq in cluster?
Didnt found anything on msdn about this.
Thanks!

By default value is 4MB for each queue and 1GB for the entire queue. The queue quota can be changed using MQSetQueueProperties()
with PropId PROPID_Q_QUOTA
Thanks, Renjith V R

Will there be any updates for ipod touch 2nd generation

i have the ipod touch 2nd generation and was wondering if there will be any updates or any fixes for that generation of ipod?

iOS 5 will definitely not support the 2nd-generation iPod touch. They list the supported devices at the bottom of this page:
http://www.apple.com/ios/ios5/features.html
Regards.

WTC random error (there's any pathc for WTC)

Hi everyone!
I'm having this error randomly, any BEA developers of this product knows how to
solve this, There will be any patch for WTC sometime?
TPESYSTEM(12):0:0:TPED_MINVAL(0):QMNONE(0):0:ERROR: getConnection can only run
on a node where WTC has been configured
at weblogic.wtc.gwt.TuxedoConnectionFactory.getTuxedoConnection(TuxedoConnectionFactory.java:26)
at weblogic.wtc.tbridge.tBexec.jmsQ2tuxQ(tBexec.java:674)
at weblogic.wtc.tbridge.tBexec.run(tBexec.java:198)
<Nov 7, 2001 11:59:42 AM CST> <Debug> <WTC> <]tBexec<run/t#1: exited.>
<Nov 7, 2001 11:59:42 AM CST> <Debug> <WTC> <]/tBexec/10/>
<Nov 7, 2001 11:59:42 AM CST> <Info> <WebLogicServer> <weblogic.wtc.gwt.WTCStartup
reports: WTC started...>

Thanks Bob.
Best Regards.
Bob Finan <[email protected]> wrote:
Mauricio,
This looks like a tBridge random error that occured in the 1.0 version
of WTC
with WLS 6.0(WTC as a separate .jar file). A fix was made for this and
was
available when WTC was released with WLS 6.1(WTC fully integrated into
the weblogic.jar). The current release available is WLS 6.1 SP01.
Bob Finan
Mauricio Del Moral wrote:
TPESYSTEM(12):0:0:TPED_MINVAL(0):QMNONE(0):0:ERROR: getConnection canonly run
on a node where WTC has been configured

If there is any restriction for procedure input parameter

Similar Messages

Maybe you are looking for