If this is any indication of life with AT&T Digital Life, then No Thanks!

Signed up for the highly recommended AT&T Digital Life to upgrade security system after almost 8 years with ADT. Became highly frustrated by the inadequate customer service AT&T Digital Life has provided. After our experience with AT&T, as outlined below, we have lost all confidence in AT&T and its Digital Life service and will be looking to remain with ADT or consider other competitors, such as Verizon.No coordination within sales. Called on May 22 to secure new multi-package security service (touchscreen door lock, multi-cameras, and water monitoring); installation was scheduled for the 8 am - 12 pm window on June 26. Received several calls from other sales reps on the same day looking to sell the same service.Sales rep misspelled last name (same name/spelling as a well-known product). The equipment was delivered to my office but my name was misspelled on the shipping label; also never received the email to register the new account in preparation of the install. Called AT&T support; rep confirmed that my name, and hence email, was misspelled in the system and could not be changed until the day of install by the tech. Rep managed to resend the registration link to the correct email address.1st No-show on day of install- June 26, 8 am-12 pm. Husband took the day off from work. At 2:30, 3 pm, no word from AT&T, called for an ETA. Support rep couldn’t find the account and put me on hold; hung up after 9 minutes without a word. Checked our home voicemail of which there were 3 messages from AT&T left the day before: one around 12:30 pm to confirm the appointment, one around 2 pm to cancel the appointment, and the last around 5:30 pm to confirm the appointment. Logged onto the Digital Life account to check the status of the install - reported that the install was to occur on June 26 as scheduled. Called AT&T support back expressing frustration over the whole ordeal. Second rep found the account under my cell number; said the cancellation was due to no available techs for the install. She also confirmed that the install order only had the home number and not my cell number as I’d provided to the sales rep for install updates and registered as my contact number on the account. Rep followed up with dispatch and rescheduled the install appointment for the next day, June 26, during the 1-4 pm window and provided the appointment confirmation number. Rep transferred me to billing for conciliation request due to inconvenience. Billing rep noted adjustment on account at first billing cycle. Spent 40 minutes dealing with AT&T on this while at work.2nd no-show on day of install-June 27, 1-4 pm. Again, no word of an ETA from AT&T. Called support at 2:30 pm for status. Rep could only find account under cell number. Rep followed up with dispatch and then reported that, since the install takes 7 hours, it was too late to proceed with the install as scheduled—beyond frustrated. Was transferred to dispatch rep who provided the next available date as August 3. Totally unacceptable! Told rep that if the install doesn’t happen on July 3, which encroaches on our holiday weekend plans, we will terminate the service and that husband and I will not take another day off from work to have a no-show from AT&T. Dispatch rep said he was sending emails to field managers alerting them of the situation and the urgent request. Again, was transferred to billing for conciliation request due to inconvenience. Billing rep noted 2 months credit on account to take place at first billing cycle. At around 6:30 pm, got a call from a field manager offering apologies and noting efforts to get install on schedule for July 3.To say the least, we’re about done with AT&T!

We are listening and want to help you! I am sorry to hear of your experience to this point. We appreciate you trusting us to help keep your home secure. Our Customer Support Leadership would like to expedite the resolution of this matter. Please share a little more information by clicking here to send Digital Life a private message. In your message please include:
Your name
Account number
Address
Contact number
Thank you again for the gift of feedback. Not only do we look forward to resolving this matter, but we will also use this opportunity to further improve our overall customer experience.

Similar Messages

  • Both of my cameras are broken. Any ways to fix them. Screen turns black then blurry., Both of my cameras are broken. Any ways to fix them. Screen turns black then blurry.Thanks

    Hello,
    My cameras become blurry and freeze they also turn black. Does anyone know how to fix it? Please help! Thank you

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                              
    If not covered by warranty
    Apple will exchange your iPod for a refurbished one for $149. They do not fix yours.
      Apple - iPod Repair price                             

  • This computer has previously been synced with an iphone

    I've got an iphone 3g & everytime I connect it to my computer it says "this computer has previously been synced with an iphone". It then says set up as a new phone or restore from the back up of iphone. This is the only iphone I've had & I've always used the same computer to sync etc. Can anyone tell me what I need to do to get it to stop asking me to restore or set up as a new phone. I've tried doing both of these several times & I still get this screen coming up. I've also uninstalled & reinstalled itunes to see if it would help but it hasn't. I would appreciate any help anyone can give me.

    Try this:
    1. First, disable auto-sync when an iPod/iPhone is connected under iTunes>Preferences>Devices(under the edit menu if using Windows).
    2. On that same device pane, highlight and delete any and all backups listed.
    3. Connect your phone, iTunes running, and re-name your phone in the left device pane:
    http://support.apple.com/kb/ht3965
    4. Then, right-click your phone in the left device pane & select "Backup". When finished sync your phone.
    See if doing this fixes things.

  • Are all Z-wave products compatible with Digital Life?

    I just recently had the basic Digital Life system installed in my home.  I was interested in purchasing third party z-wave locks and thermostats to install on my own.  I can't find a list of compatible products for the Digital Life system.  Does Digital Life support all z-wave products?  If not, which ones do they currently support? Thanks!

    
    At this time you cannot connect 3rd party z-wave devices to your Digital Life system. However, this is on the roadmap as a future enhancement.

  • The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol. My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this. Any idea how it can be fixed???

    The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol.
    My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this.
    Any idea how it can be fixed??????

    Hello,
    You are correct, Blue tooth low engergy, BTLE.(only) devices are not backward compatible with Classic bluetooth and cannot connect.
    However the Apple 4S and above have Bluetooth 4.0 support.. Hardware wise it has bothClassic Bluetooth, like the 3GS, as well as Bluetooth Low Energy.  There is no good reason why your 4s cannot communicate to your Sony in-dash player using the Classic bluetooth that resides in the 4S.
    I know that this does not answer the why it does not work, but it should work. Do you have to somehow re-pair the new phone up to the player?  Not  knowing the model of the Sony it is hard to investigate.
    And I hate to ask but are you sure that the Bluetooth radio is on in the phone?
    JT

  • Trying to sync iPod with library, but receive this message, "The iPod is synced with another itunes library.  Do you want to erase this ipod and sync with this itunes library".  I do not want to erase my iPod... Any suggestions??  Please help!!

    Trying to sync ipod with itunes library, but I keep getting this message, "  The ipod is synced with another itunes library.  Do you want to erase this ipod and sync with this i tunes library?" 
    I do not want to erase my ipod!!!  Any suggestions?? please help!

    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Using The iPad Camera Connection Kit
    http://support.apple.com/kb/HT4101
     Cheers, Tom

  • My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

    My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

    Yes, windows to Mac too.
    iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
    Windows users see tip at: https://discussions.apple.com/message/18879381

  • Zen Vision M Firmware Problem!!! Can't deal with this thing any more...

    Can't deal with this thing any more...3 Hello friends I'm new in the forum
    Well as the title mentions, I'm about to throw this thing oute of the window!!!
    It's a 30 GB Zen Vision M, I own it ,5 years now...
    I have read all the relevant posts in the forum about this player, I tried my best, nothing really worked.....
    So now I have a Zen which only boots in the recovery mode!!
    I have Cleaned it Up, Formated it, and tried to reload its firmware BUT when I connect it and try to reload it, in the end it always says Firmware Upgrade Failed!!Really can't understand it!!!!!
    I've communicated with Creative, i wasn't at all satisfied with their responses... I think what they're trying to do is to avoid me, and earn some time with really useless suggestions which I had already told them won't work!!!So in the end they wanted me to send my Zen in Italy and pay more than 100 Euros for what an ,5 year old mp3 player?No I prefer buying a new Cowon with that amount of money!!!
    Anyways I'm pretty mad now, so I'll move to the subject..
    I have Service Pack 3 Windows XP in my computer, and I did roll back on the Media Player 0 from the I had, using the instructions from a previous post. The truth is that it rolled back with less steps than it showed, and I say that because it mentions in a step that in the add-remove programms, in the Windows XP-Software Updates section, I should find a Windows Media player thing which really doesnt exist and I suspect it's the Service Pack 3 because I have done the same in a SP2 and worked exactly as the steps said..Anyway the fact is I have Windows Media Player 0 now!!!
    Please someone tell why can't I upgrade my firmware... I can't deal with this anymore!!!!

    KRe: Zen Vision M Firmware Problem!!! Can't deal with this thing any more..._
    menios wrote:
    So you say that I actually have the Windows Media Player 0, because my Zen is being recognised..
    I have rebooted it several times but its just the same thing...it shows firmware problem!!
    Why isn't this player working?I've seen many people, not only from here, who have the same exact problem and they gave up on their mp3... I dont have this kind of luxury to buy a new one!!I don't know whether Creative has put on this a "time bomb" or is just faulty, but I really wish it could be saved..
    I'm saying it is WMP0 because the firmware file sees the player. The computer can recognize it but with WMP components that firmware file would be grayed-out..So when you reloaded the firmware did you choose "reload firmware" Before you connected it's?(That is what erases the firmware prior to uploading the firmware. If you did not do that it could cause it to fail.Do these ste
    ps.
    Open the firmware file,On the player format>cleanup>choose reload firmware, then connect & run the firmware file.

  • I have Windows 8 and Itunes 64 bit.  Not able to synch any iphones or ipads with this version.

    I have Windows 8 and Itunes 64 bit.  Not able to synch any iphones or ipads with this version.

    A Google search should provide a number of instructional links.

  • HT201322 Can't get this to work on iPad A1395 with iOS 6.1.2 - any suggestions?

    Can't get this to work on iPad A1395 with iOS 6.1.2 - any suggestions?

    If you mean hiding or unhiding apps, the article is incorrect since iOS 6 and the accompanying iTunes Store redesign were released. You can at this time only hide and unhide apps through iTunes on your computere.
    Regards.

  • How do I get a refund?  I have tried to use this converter to change a PDF to a word document or excel document three of four times and it always fails..  I want my money back but don't see any way to communicate with Adobe.

    How do I get a refund?  I have tried to use this converter to change a PDF to a word document or excel document three of four times and it always fails..  I want my money back but don't see any way to communicate with Adobe.  i really just want my money back.  Very disappointed.  Also disappointed that it is so hard to find a way to communicate with Adobe that I have to resort to asking this question in this forum. 

    You need to use the CHAT link in support to reach Adobe staff. Be sure you know the product name you are trying to cancel, Adobe have lots of products, several converters etc. I think it is ExportPDF you have, most likely.

  • This XML file does not appear to have any style information associated with

    Hi All,
    I have IDOC to XML file scenario.
    In SXMB_MONI, it showed the message processed successfully (checkered flag).
    I open the payload in the target, I'm able to see the XML format without error.
    then I checked in RWB the overall status is successful.
    But when I checked the detail (message content) I got the following message:
    "This XML file does not appear to have any style information associated with it".
    So physical file created is like corrupted.
    If using XML marker to open the file it show warning "Invalid Unicode Sequence".
    The thing is when rerun the whole interface again, which is mean the same idoc send from the source, the file created successfully. Sometimes need to rerun twice or more than that to get the file.
    Anyone has idea on what is wrong here?
    Thanks,
    Victor.

    Hi Baskar,
    Thanks for your reply.
    It's PI 7.0.
    Overall status is successful but when I go to RWB to check the message content i got the error message above.
    Target system is only normal FTPS server.
    XML file is created as well but it's showing error when we open it.
    The weird thing is without fixing anything if we rerun the same interface with same set of data sometimes the error is gone by itself.
    Thanks,
    Victor.

  • I keep getting the message This XML file does not appear to have any style information axxociated with it. The document tree is shown below Is this a serious problem?

    My daughter and i use same computer she uses firefox and recently we have noticed on facebook apps we get the message This XML file does not appear to have any style information axxociated with it. The document tree is shown below

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • I keep getting "This XML file does not appear to have any style information associated with it."

    I keep getting a message that reads "This XML file does not appear to have any style information associated with it. The document tree is shown below." when I try to view certain images with the document tree reading something like this:
    <Error>
    <Code>AccessDenied</Code>
    <Message>Access Denied</Message>
    <RequestId>BCC4C0545EAAB7AE</RequestId><HostId>3LxcI9VY5wksYdmblAgu2dYu9ZfkLVZJWYhDtoIdRIE4HyARxC+ogJXkApL6U+tT</HostId>
    </Error>
    I tried updating Firefox and that didn't work. All I could find was that it could be a proxy thing, but I'm set to "no proxy" in my network settings so I'm stumped.

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Using live HTTP header get This XML file does not appear to have any style information associated with it. The document tree is shown below

    Im using ReloadEvery 3.6.3 & Live HTTP Headers 0.16 plugin's for playin mobsters on myspace. After capturing the the script, editing & placing in the address bar I recieve a message: Failed Security. This XML file does not appear to have any style information associated with it. The document tree is shown below. There was nothing on the Tree. I know the script was edited correct cause it works on the other PC's. Operating system is win7 & Firefox is current. Thx.
    == The first time

    yea I got the same error for playing files on filestube and its just not that, ever since 2 days ago when I updated firefox everything have just started to ..uck up all the time, high cpu memory load without any addons and it wont terminate for another 20secs after I close it... I think I'll just reinstall with an older version, everything worked just fine then

Maybe you are looking for

  • Memory speed and graphic card slot

    Hi, I have just built a system with a P67A-GD65 B3 board, everything works fine, but while double-checking on the system's specs and performances I came across two weird issues: - I have 2 x G-Skill F3-17000CL7-2GBXHD RAM sticks at 2133MHz, I have en

  • Dynamic Action, validation check, on an Item, could not use Change event

    I am learning how to use Dynamic Actions in a 3.2.x app that was upgraded to 4.0.x. I wanted to share what I learned adding client side validation with these actions. Perhaps an Apex guru could suggest an easier method to use this feature. I have an

  • How to get AS2 identifier from message received

    when we dequeue the message from oracle B2B , is it possible that we extract the as2 identifier as well??

  • Xml export - registration gift

    I read that the xml export extension was one of the options as an incentive when registering Creative Suite Web Premium, however when I upgraded (via DW on first launch) I didn't see an option to download, and haven't received an email. Is this somet

  • WSA DNS response times

    Hi there, I would like to know if it is possible to check on WSA appliance DNS request timings from specific time frame in past. I was able to check access logs but they are including only %<d value which is just initial DNS request but not whole DNS