If you have a quicktime movie with an AC3 sound track, how do you save out the AC3 file with only an AC3 extension?

Im using Quicktime 7.6.6
OS X 10.6.8
I'm trying to remove the quicktime container so I can import the AC3 into Adobe Encore, which will not import a 5.1 asset if it is within a quicktime container appearently.
It would normally help to know more about the source QT file' compression format(s). If the file is "muxed" MPEG-2/AC3 data in an MOV file container, then you can use MPEG Streamclip to "demux" the AC3 content directly to an "AC3" file container using the "Demux/Demux to AC3..." File menu option. If the AC3 track is an elementary stream within the MOV file container and if QT 7 has been upgraded for "Pro" use, then you could try extracting the AC3 track to a new player, ensure the AC3 track is selected/active in the new player, saving the new player as a new MOV file using the "Save As..." File menu option, manually change the extension from ".mov" to ".ac3" and try importing the re-named asset to Encore. (This probably only works if the importing app only checks the extension and not the container itself.) In a similar manner, if QT 7 is not upgraded for "Pro" use, you can use Subler to extract the AC3 track and save it as an M4V file whose extension can then be changed to ".ac3" in the finder.

Similar Messages

HT204088 Hello everyone, i want to know how can i found out the purchases made with my credit card (not by my apple ID)?

Hello everyone, i want to know how can i found out the purchases made with my credit card (not by my apple ID)?
I found out in my Credit Card bill some purchases in itunes store that wasn't made by me.
thanks to all helpers

This would be something you would need to address with your credit card company. Apple cannot tell you who else might have used your card nor what purchases they might have made. Call your credit card company and report the charges as fraudulent. You'll probably need to have them cancel your existing card and issue you a new one.
Regards.

Is the data automatically synced after you do the original setuop or do you have to do something to make it sync? How are changes synced after the original setup?

How is the information synced after the original setup? Is it done automatically or do you have do do something? And if so, what?

After you setup Firefox Sync, you do not have to do anything else. It will automatically sync your data in the background. <BR><BR>
See these articles for more information:<BR>
[[How to sync Firefox settings between computers]]<BR>
[[What is Firefox Sync?]]

How to write heading in the xls file with each of the channel in each column?

Dear All,
While writing the data into the xls file through .lvm method I want the Headong for each channel to be include on each of the column, but i dint know how to do this? is this possible in the LabVIEW from any of the file writing method? if yes how can i do that? please help me.........
Thanks,
Nishant Desai

Thanks Chilly,
Its a really fantastic idea, and it works for me too, but the thing inside was every time once it writes the heading and then it write the data again after that it wirtes the heading and write the data, but i ve copup with dat and i ve modified the vi which u ve given to me, i am attaching that vi to with this.
wat i ve done is just putting the write to spreadsheet data vi into the while loop and other all are outside the while loop, which makes the heading to write once and data to write continuosly.
Thanks & Regards,
Nishant Desai
Attachments:
Write channel names_yours.vi ‏25 KB
Write channel names_mine.vi ‏31 KB

Export Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export Quicktime movie?

Export>Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export>Quicktime movie?

When you converted the original files via MPEG Streamclip, what did you convert them to?
Have you tried trashing your preferences in FCP? Trashing FCP prefs is usually the first step when FCP is performing strangely.
Download Preference Manager from Digital Rebellion (free) at:
http://www.digitalrebellion.com/prefman/
It will allow you to archive your current preferences if you wish to restore them later.
MtD

Help! (please :) I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

Help! (please I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

Or If there is any purchased music then you can try to transfer purchases
http://support.apple.com/kb/ht1848
If you're in the US you can reload purchased music
http://support.apple.com/kb/ht2519

IMac Computer using 10.7.5, running iTunes 11.1.5, and using an iPad 2 with os 7.1 . I have over 300 movies in my library and when I share using video on the iPad, the titles covers are all on the wrong movies. How do I fix this?

iMac Computer using 10.7.5, running iTunes 11.1.5, and using an iPad 2 with os 7.1 . I have over 300 movies in my library and when I share using video on the iPad, the titles covers are all on the wrong movies. How do I fix this?

Hi Michael,
I'm glad iTunes is working now! If you want to locate iTunes plug-ins on your computer, you can find them in the following locations (you may not have the iTunes Plug-ins folder if you do not have plug-ins):
Mac:
/Users/username/Library/iTunes/iTunes Plug-ins/
/Library/iTunes/iTunes Plug-ins/
One thing I also wanted to mention is that the "Users/username/Library" is hidden in Lion and Mountain Lion. You can access it using these steps:
OS X Mountain Lion: What is the Library folder?
The Library folder contains files used by OS X and your apps, including your personal fonts and preferences. The Library folder is hidden. If you need to open it, make sure you are in the Finder, hold down the Option key, and then choose Go > Library.
You can find the full article here:
OS X Mountain Lion: What is the Library folder?
http://support.apple.com/kb/PH11395
All the best,
Sheila M.

HT201303 i have tried to perchase a movie and it keeps coming up with questions about my past thet i dont remember the answer to. how do i find out the answers? i have never come across these questions until now

i have tried to perchase a movie and it keeps coming up with questions about my past thet i dont remember the answer to. how do i find out the answers? i have never come across these questions until now

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????

Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????

Requirements for iPhone 5:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later
The highest version of iTunes you can install is 10.6.3 which will not sync with the iPhone 5.
Roger Wilmut1 wrote:
It's always a good idea to check the requirements before purchasing.
The person I spoke with at 1-800-MY-APPLE gave me totally different info...she said the iPhone 5 would in fact sync with the older version of iTunes and that I could restore from my previous iPhone 4 backup and also bring in my music that way. Hmmm....
I'm inclined to go by the published specs, but now I have to jump thru a bunch of hoops I wasn't expecting to.

How do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

Are you using a v6 uitlity.. because it is a toy.. ??
Get v5 utility and then you can hold down the option key and select the right mode.
If you have lion, just install it.. For ML follow this.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go.

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information, his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go. Is there any way to eliminate his iCloud account and make mine the primary without rebooting it back to factory settings? There was an update, I believe, that I couldn't install because i didn't have his password that is what made me aware that his acct. was still active. I don't know what to do. Any help is greatly appreciated. Thank you.

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

Where does Lightroom put HDR in the grid view? Is there anyway to have Lightroom stack the HDR file with the source files?

I can't decipher where (and why) the program is putting the HDR image in the grid. I stack all of my HDR source images so they are easy to track and manage. Other apps/plugins allow you to stack resulting images with their source image. That would be great if there's a way to set that in LR preferences.

Thanks, but this doesn't really answer the question about stacking the HDR file with the source files. Yes, it does put the file in the same folder, however many of my folders have 100s of images (that often look similar) and as far as I can tell, LR places them randomly in the sort order. It doesn't appear to put them at the beginning or end of the sort (usually by date), but somewhere randomly in the middle. Even if it could be made clear what method it is using to sort them, that would help locate one file among hundreds.
Ideally, however it should allow you to stack with the stacked source files. Is there anyway to do this? If not, is it a feature that could be requested?

I have a white MacBook. I just changed out the hard drive with a 500GB. When I turn it on I get a file fold with a ? In the middle that flashes. What do I do next?

I have a white MacBook and I just changed out the hard drive with a 500GB. When I turn it on I get a file fold with a ? In the middle that flashes. What do I do next?

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I have a MacBook 6,1 and have a number of start up discs. How can I find out which one came with my model?

I have a MacBook 6,1 and have a number of start up discs. How can I find out which one came with my model?

They sometimes have that information on the label. Otherwise, it's trial and error. The model you have is a Late 2009 13" MacBook. It came with a special version of 10.6.1 pre-installed.

Do you have hindi fonts for InDesign CS4 and if so how much are they?

Do you have hindi fonts for InDesign CS4 and if so how much are they?

Adobe does offer a few Unicode fonts that support Hindi I'd expect that you'd be asking for Devanagari fonts, though. Have you ever done any Hindi typesetting? I mean, when we typeset English we don't do it in "English fonts" but in "Latin-script fonts."
There are two main classes of Devanagari fonts - the more common, older fonts where someone took a Latin-script font, erased the characters, and replaced them with Devanagari glyphs, versus contemporary Unicode fonts. The first class are wonky, hard to use, and quite common. If you're in-country you will find lots of ways to buy those kinds of fonts. You also can use them in InDesign without needing any scripts or plugins to turn on the World-Ready Composer. I find Unicode fonts to be much easier to use, to automatically compose according to proper rules regarding behavior of glyphs - but to use them in CS4, you'd need something like World Tools or IndicPlus. I'm a World Tools user myself but if you're going to be doing only Hindi work in CS4, I'd suggest that you look at IndicPlus first.
In short - it's deeper than it looks. If you want to tell us more about what you're trying to do, we might be able to give you better advice.

If you have a quicktime movie with an AC3 sound track, how do you save out the AC3 file with only an AC3 extension?

Similar Messages

Maybe you are looking for