If you're writing an extension that uses the LogWindow...

...and you want a new tab to appear in the LogWindow, you might have some problems getting the tab to display nicely. I had problems with the PMD extension - when I installed it in JDev, the PMD tab replaced the Message tab and I couldn't figure out how to get it back until recently. The way I got it to work was by:
- not calling Ide.getLogManager().addPage(myNewPage) in my AbstractLogPage constructor, but instead calling that in my Addin.handleEvent()
- putting some more code in my Addin.handleEvent() implementation:
if (!added) {
Ide.getLogManager().addPage(myNewPage);
Ide.getLogManager().showLog();
added = true;
where "added" is a field on my Addin implementation. Note that this code means that the PMD tab will be added to the LogWindow, but the Message tab will have the default focus.
Note that I'm still using JDev 9.0.3, so I might be a bit behind the times if there's something newer out there. Comments/corrections are welcome.
Hope this is helpful to someone,
Yours,
Tom

Hi Tom,
Thanks for the tip, and the new release of PMD :)
(I think) this is a bug we found with the log manager and will be fixed in the 9.0.5 (10g) preview... was the behavior you were seeing that your log page contents replaced those of the messages tab?
Thanks,
Brian
JDev Team

Similar Messages

Can you share photos between machines that use the same wifi network? Thanks for your help.

Can you share photos on i-photo between machines that use the same network or even between different accounts on the same machine? I know you can share music on i-tunes but can you do the same on i-photo? Thanks for your help.

Yes.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
You can figure out using it with another machine from that too

I just updated to Pages 5.0 and I am writing a document that uses both, Spanish and English...I used to use the inspector to change spelling and languages. How do I do that in this new version?

I just updated to Pages 5.0 and I am writing a document that uses both, Spanish and English...I used to use the inspector to change spelling and languages. How do I do that in this new version?...HELP!!!

jedimaster Master wrote:
how do I do both?
By choosing SET UP for the "automatic" item at the bottom of the list I referred you to earlier

How do you separate the iCloud on two iPads that use the same Apple ID

How do you separate iCloud accounts for people using the same Apple ID

You can share an AppleID between individuals for purchases from iTunes (music, movies, TV shows, books, etc.) while each having an individual iCloud account for syncing your personal calendar, contacts and iCloud files.
In my household......
We have a single AppleID for iTunes purchases which is used on all 8 of our iOS devics and 3 computers. That way all apps purchased from the Mac or iOS app stores or content from iTunes can be used on any device.
Each of us (3 of us) then has our own iCloud account. None of our iCloud accounts are the same as the AppleID. The iCloud accounts are used for device backups, contact and calendar syncing, iCloud document files and photostream.
This way, we all share apps and media, but our contacts and calendars are not mixed and neither are our documents. Each person having their own iCloud account also helps with space when dealing with device backups.

Are you still able to get apps and games that use the 4.2.1 version?

are you still able to get apps and games that use the 4.2.1 verson on a second generation ipod touch?

Yes. To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version.

I have problem since I download fire fox 4 it does'nt remember my windows live ID only the last one with are 4 different people that use the computer

Question
I have problem since I download fire fox 4 it doesn't remember my windows live ID, only the last one with are 4 different people that use the computer

Such a feature is stored in a cookie. Firefox only keeps one set of cookies for all open tabs. So only the last user is remembered.
You can look this extension if you want to sign on with different identities at the same time:
* Multifox: http://br.mozdev.org/multifox/ (for Firefox 4 use this link: Firefox 4? Try Multifox 2 Beta 1!)

Problems creating a web service that uses the report generation toolkit

Hi,
Im trying to develop a web service using labview 2013.
I create a html form that is correctly communicating with my labview method and part of the web service functionality is to create a report from the data obtained in the html form published.
I realized that using the report generation toolkit inside of the web service method the server cannot generate a report. ( If I run the same Vi before publishing the web service it works on the server but it doesnt work after I deploy it)
I thought that maybe Im unable to use the report generation toolkit VIs inside of the web service because Im not incluiding the (dynamic VIs labview uses when they run), I tried to add the excel dynamic library to the proyect but with no success.
I also tried to use VI SERVER to call a VI that generates the report using the report generation toolkit in the method that runs when the web service is call but it doesnt work either.
How can I deploy a web service able to use the report generation toolkit ?, how can I deploy a web service able to use VI server ?
Any help is really appreciated.
Erwin Franz
Erlab

The issue you are running into is actually a limitation intended by Microsoft. They don't want windows services to be able to call into the ActiveX interface for Microsoft Office for security reasons. If you are deploying your web service to the NI Application Web Server on Windows you will run into this problem since the web server is a Windows Service.
While I haven't tested this, you may be able to work around this by packaging your Web service with a LabVIEW EXE rather than deploying to the NI Application Web server.
Mark
LabVIEW R&D

HT4137 I have two iPad's that use the same iTunes/store account. I want the two devices to play games with with other, but it recognizes them as the same. I have set up two different iCloud accounts, but still not recognizing the users as different. What

Hello, I have no idea if my question went out, so I'll post it again. I have two iPads (one 3rd gen and one 4th) that use the same iTunes/store account. I want the two devices to game with each other, but the apps recognize them as the same. I have created two different iCloud accounts in an attempt to differentiate between the two, but no luck. How can I continue to use the same iTunes/store account for music and movies, but also have the two devices recognize each other for games?

You can share your iTunes ID and still have separate iCloud accounts with separate IDs, they don't have to be the same. If you kids don't already have an iCloud account, have them set up separate accounts on their devices using separate IDs. If they are already sharing your account, migrate their devices to separate accounts. To do this, start by saving any photo stream photos they wish to keep to ther camera roll (unless already there) by opening your my photo stream album, tapping Select, tap the photos, tap the share icon (box with upward pointing arrow), then tap Save to Camera Roll. If they are syncing notes with iCloud, you'll need to open each of your notes and email them to them so you can later copy and paste the text into new notes created in their new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from thier device and won't effect your device), choose Keep on My iDevice and provide the password to turn off Find My iPhone (if using iOS 7). Then sign back in with a different Apple ID to create their new account and choose Merge to upload the data. Once everyone is on a separate account you can go to icloud.com from your computer, sign into each account separately and delete your data from their account.

Dealing with two email accounts that use the same SMTP (outgoing) server

Folks:
re:   mail.app 5.2 (MacOS 10.7.4) with respect to POP accounts only
I've read this thread multiple times, spent many hours experimenting, and my web searches haven't come up with any more useful help.
How do you persuade mail.app to accept settings for two similar, but distinct email accounts that use the same SMTP (outgoing) server?   Say, the accounts are "blue.example.com" and "[email protected]". These have different user names and passwords.   The SMTP server is "smtp.example.com".
I think this is the appearance of success: the SMTP Server List (as seen in edit-the SMTP-Server-List mode) shows:
Server Name                   In Use By Account
    smtp.example.com      [email protected], [email protected]
(Description column omitted for brevity. And of course, mail.app doesn't show the little envelope icons.)
But I cannot reliably achieve this result.   When I select the SMTP server from the list for the second account --as suggested in the above-referenced thread--- I see the credentials (user name and password) for the first. Should I overwrite them? No, I don't think so -- I think that will break the first account.   I feel mail.app should present me with empty credentials boxes instead. Maybe this happens -- sometimes. But I can't see how to make it happen. Am I simply overlooking something?
A slightly different way of asking about this issue:   Suppose I manage to do a proper setup for the two accounts and they work. Then I change the password for "[email protected]" on the server. What is a reliable way of reaching the SMTP credentials for that account to make the edit? Same question for "[email protected]"?    Even when I successfully attach two accounts to one SMTP server, I seem only able to reach the first listed one to make changes. (In this case, "blue.example.com").
It is possible I'm missing something incredibly obvious...    I know the credentials for each account are distinct, but maybe mail.app copies them from the POP (incoming) settings.   Nah, that can't be, can it?   Or what?
Maybe I'm seeing bizarre things due to scrambled mail.app preferences. I've seen it before on other apps: delete the current preference file, get an auto-generated fresh one, and sanity returns. But with mail.app, with the prospect of losing years of emails --yeah, I've done it-- I'm extremely reluctant to mess around.
Suggestions, please.
TIA
Message was edited by: Hen3ry to clean up the table a little and add a parenthetical explanation.

OK, I'm convinced.   The mail.app UI is BROKEN -- in my primary user account. Such that it cannot reliably select an outgoing server for editing.
I created a new user account and installed some relevant example accounts in mail.app in that account. No problem. Well, a bit obscure, but still fully logical and reliable selection of individual SMTP accounts for editing.
For the sake of clarity, I think it is best to mark this "answered" and repost, focusing on the symptoms and asking how one might go about repairing the problem. So I'll do that.

How Can You Track Your Ipod If Lost Using The Serial Number

How Can You Track Your Ipod If Lost Using The Serial Number?

The find my iphone app has nothong to do with it.
That app simply allow you to find other devices using your ipod. It has nothing to do with fining the device on which it is installed.
If you set up the find my ipod feature that is built into your ipod and the ipod is on and it is connected to wi-fi and it has not been restored, then you may be able to get an approximate street address using icloud.
Othrewise, it cannot be tracked.

How can I build a LabView application that uses the 2012 runtime, on a development system with LabView 2013 or 2014 installed?

I need to build a LabView application .exe to run with the 2012 Runtime, for legacy support. I currently have LabView 2013 installed on my development system, and have 2014 available. How can I build an application that uses the 2012 runtime on this development system? Do I have to downgrade to 2012? Thank you.

We have existing customers that have installed our application that was originally built with 2012 (provided by a contractor that is no longer available). Due to IT regulations, it is far easier to update these customers by simply replacing the .exe file, than creating an install that their IT department must run.
If I have to downgrade to LabView 2012, where can I get the installation for this?

Is it possible to set up a computer that uses the Sprint...

Is it possible to set up a computer that uses the Sprint Pantech PX-500 (Mobile Broadband Card) to share its connection via Wi-fi? How would I set this up on a WRT54G?
Thanks so much!
-B

If you haven't got the router then get WRT54G3G. If you already have a router then use it as a switch/access point, and use windows internet connection sharing or proxy server to share internet.

HT2090 hello, my eyesight issue happens occasionally, from time to time i run multiple apps that use the isight camera. when i close each app the isight camera's green light is still active. When that happens the only way to stop the isight camera is to r

hello, my eyesight issue happens occasionally, from time to time i run multiple apps that use the isight camera. when i close each app the isight camera's green light is still active. When that happens the only way to stop the isight camera is to reboot.
Is there a way to use activity monitor to identify and kill the process controlling the isight? My apologies in advance if this sounds windows (task manager) like.
Thanks

tqtclipper wrote:
hello, my eyesight issue happens occasionally, from time to time i run multiple apps that use the isight camera...
http://support.apple.
com/kb/HT2411: Your camera can be used by only one application at a time.
(Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
tqtclipper wrote:
... Is there a way to use activity monitor to identify and kill the process controlling the isight? ...
http://support.apple.
com/kb/PH5147: You can quit any process you can see in those listed in the window that opens when you use Activity Mornitor's
Window >
Activity Monitor
menu command.
Message was edited by: EZ Jim
Mac OSX 10.8.3

How to resolve "You don't have permission to use the application" errors?

We've been struggling with managed preferences, specifically applications, for a few users. They have mobile home folders which live on a Mac OS X 10.6.x Snow Leopard Server AFP server, preferences which are managed (by group) on a Mac OS X 10.6.5 Snow Leopard Server Open Directory Master, and the clients are running Mac OS X 10.6.4 Snow Leopard (bound to the Open Directory Master). There are also two Mac OS X 10.6.4 Snow Leopard Server Open Directory Replicas. We always manage applications and DO NOT sign the apps when adding them in Workgroup Manager.
Essentially, key applications are unable to run due to the "You don't have permission to use the application" errors, even though they're explicitly whitelisted. (See some prior investigation over on Serverfault.) After seeing that the Mac OS X 10.6.5 Server update included the following fixes, we upgraded our Open Directory Master to 10.6.5:
* Addresses an issue that could prevent managed preferences from being applied when a user logs in on a workstation that has been idle.
* Fixes an issue that could prevent administrators from bypassing client management settings on a workstation.
This seemed to improve the situation slightly, our most important application now seems to be allowed. Occasionally, it'll give the same error, but a simple log out & back in allows it again. We have not upgraded the client workstations with the Mac OS X 10.6.5 update as it doesn't note any related fixes and we haven't fully qualified it for mass deployment.
We now have two applications that live in ~/Applications which are explicitly whitelisted (again, NOT signed), which fail with the same error, but logging out & back in does not resolve it. `sudo mcxrefresh -n 'user'` doesn't resolve the issue. In fact, `sudo /System/Library/CoreServices/ManagedClient.app/Contents/MacOS/ManagedClient -f -u `id -u 'username'`` fails with the following error:
ManagedClient- bad parameter to -u option: use format '-u 501'
Today I was able to catch the following in /var/log/system.log while attempting to run one said applications:
Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker checkApp:csFlags:] [954:user] -- * Incoming app appears to be masquerading as white listed app and failed signature validation: /Users/user/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro. Note: This may be a valid app of a different version than what was whitelisted (on a different volume?)
Dec 22 17:36:24 hostname [0x0-0xa42a42].com.filemaker.filemakerpro[43304]: launch of /Users/user/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro was blocked
Dec 22 17:36:24 hostname com.apple.launchd.peruser.1340[6375] ([0x0-0xa42a42].com.filemaker.filemakerpro[43304]): Exited with exit code: 255
Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker(Private) _removeAppFromWhiteList:] [1362:user] -- * Couldn't find local user record
So, even though the apps are listed in Workgroup Manager and are unsigned, and also appear in '/Library/Managed Preferences/user/com.apple.applicationaccess.new.plist', it appears that the client somehow thinks they don't match what's in the whitelist even thought WE DON'T SIGN THEM WHEN WE ADD THEM!
What might be causing this? Any further troubleshooting tips would be GREATLY appreciated!

According to the [Code Signing Guide|http://developer.apple.com/library/mac/#documentation/Security/Conceptual /CodeSigningGuide/Procedures/Procedures.html#//apple_ref/doc/uid/TP40005929-CH4- SW2], it appears that there is no way to remove signing (emphasis mine):
"You can take a partial-update approach to revising your code on the user’s system. To do so, sign the new version as usual, then calculate the differences between the new and the old signed versions, and transmit the differences. Because the differences include the new signature data, the result of installing the changes on the end-user's system will be the newly signed version. You cannot patch a signed application in the field. If you do so, the system will notice that the application has changed and will invalidate the signature, +and there is no way to re-validate or resign the application in the field.+"
Upon further investigation, the version of FileMaker 5.5 in question appears to be signed even after a fresh install from original install media. I wouldn't have thought Code Signing was around back then (2001). And the code signing appears to match between the fresh install (to a new location) and the original install. I'll attempt to sign it in WGM and install the same, signed copy everywhere.
Also, I looked at one of our other working primary applications (4D.app) and it is unsigned, but appears in the Firewall as "Allow incoming connections", so I don't believe that the Application Firewall is necessarily signing apps automatically (but I certainly won't be ruling it out).
I haven't checked yet, but the other application that's failing is "Parallels Desktop 6", which I'd bet is signed. I wonder if the "Automatically allow signed software to receive incoming connections", which is checked, would come into play at all?
Thanks for pointing out how to use `codesign` to check whether an application is signed or not, this seems to be the first real break on this case.

Are there games that use the nano's built in accelerometer?

I want to buy some good games that use the 4g nano's accelerometer.

No you can't block the games, and to be honest I don't see the point anyway !
What kind of spoilsport parents buy a present and then wants to disable a harmless set of very simple games.
They are using it for games because it is fun and they are enjoying themselves!!!
Maybe there should be a 'No Fun' option on the iPod, and only allow miserable music to be installed.....

If you're writing an extension that uses the LogWindow...

Similar Messages

Maybe you are looking for