IFS WITHIN and ABOUT search operators

From the WebUI, how do you use the WITHIN and ABOUT search
operators?
From the File Contents field, I enter "ABOUT water" and I get
IFS-22012: Search Failed. Invalid Query may have been specified.
Ideally, I would like to use the WITHIN operator to search on
content in a specific XML tag. I think it should work like this:
water WITHIN <para>
Thanks for your help.
Robert

Try: water WITHIN para
Take away the tag brackets. In other words if you need to
search for the string 'water' within the <para></para> tag set
use the above in the File Contents search box.
Robert

Similar Messages

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy...

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy... When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything... Very buggy.

It appears to me that network file access is buggy in Maverick.
In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
It makes impossible navigate a directory tree.
File access has been trashed in Maverick.
They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again.

A question about search help and input help,PLZ take a look at it.

hi everyone,
i want to know the difference between search hlep and inpu help
can anyone tell me about that?
thanks

HI
BOTH ARE SAME
you can define F4 help in 2 ways
in SE11 or in the report program
IN SE11
Attaching a search help to a table field
Choose the field name, click on search help tab and
provide the name of the search help.
A search help is attached to a field of a table or structure in the maintenance transaction for this table/structure, analogously to attaching to a table. You must assign the interface parameters of the search help to any fields of the table/structure. The search field must be assigned to an EXPORT parameter of the search help at this time.
Attach the search help to the table field
The search help ZSTRAVELAG_NAME is therefore directly attached to the field AGENCYNUM of table ZSTRAVELAG.
Attaching a search help to a data element
Provide the search help name and the parameter name
under the further characteristics tab of the data element.
If the input help of a field is defined by its data element, no further screen fields can be used in the input help.
Also note that the input F4 help would be available wherever the data element is used.
Attaching a search help to a screen element
A search help can be directly assigned to a screen field in two ways.
The name of the search help must be entered in the Screen Painter in the Attributes for the field in the field Search help.
The name of the search help can be defined for selection screens in ABAP reports in the PARAMETERS or SELECT-OPTIONS statement directly following the supplement MATCHCODE OBJECT.
However, input help is only available for this particular screen.
in REPORT PROGRAM
in this way we declare in report program
TYPES : BEGIN OF ST_OBJID_SH,
OTYPE TYPE HRP1000-OTYPE,
OBJID TYPE HRP1000-OBJID,
END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
*SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
IF S_OBJID IS NOT INITIAL.
SELECT OTYPE OBJID FROM HRP1000
INTO TABLE IT_OBJID_SH
WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
SEARCH HELP FOR QUALIFICATION.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'OBJID'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'S_OBJID'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_OBJID_SH
FIELD_TAB =
RETURN_TAB = RETURN_TAB
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
Check this out
http://www.sap-img.com/abap/value-request-for-parameter.htm
******************************8
sample program
report zrich_0001 .
data: begin of ihelp occurs 0,
field type char10,
ftext type char50,
end of ihelp.
data: a_field(20) type c.
select-options s_field for a_field.
initialization.
ihelp-field = 'A'.
ihelp-ftext = 'Description A'.
append ihelp.
ihelp-field = 'B'.
ihelp-ftext = 'Description B'.
append ihelp.
ihelp-field = 'C'.
ihelp-ftext = 'Description C'.
append ihelp.
at selection-screen on value-request for s_field-low.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'FIELD'
dynprofield = 'S_FIELD'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = ihelp.
start-of-selection.
one more program....
REPORT ZHELP .
TABLES : MARA.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_MATNR(10) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR TYPE MATNR,
END OF ITAB.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_MATNR.
SELECT MATNR
FROM MARA
INTO TABLE ITAB
UP TO 10 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'MATERIAL NUMBER'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_MATNR'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = ITAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
Create it from SE11.
enter search help
and create elementary
enter description and below Table name
and the fields
see the doc
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm

Home:about search uses facemood..

home:about search uses facemood...
ive uninstalled it via control panel, disabled and uninstalled it via firefox addons. reset the homepage. went to about:config and reset the following:
browser.search.order.1
browser.search.defaultenginename
browser.startup.homepage_override.buildID
browser.startup.homepage_override.mstone
keyword.URL
but still on the homepage it uses facemood! firefox help

that's '''about:home''' not reversed wording
Your home page is in '''browser.startup.homepage''' your can reset
or change it to whatever you want there, or see
*How to set the home page | How to | Firefox Help
*:https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page#w_set-a-single-web-site-as-your-home-page
In your about:config filter on: facemood
:reset any variable that just has a single value in it, be careful if you see something with several urls named, or several items of any kind within the value.
Check also to see if you have an extension by that name.
These two have to do with Firefox update, they override your home page for one restart and should be unrelated to your problem.
:browser.startup.homepage_override.buildID :browser.startup.homepage_override.mstone keyword.URL

Get rid babylon and delta search, uninstall wont work because it doesn't show up, please help

I want to keep my firefox but have caught this babylon and delta search and no matter what i do it will not go

Remove Babylon Features:
Remove Toolbar (from Extensions)
1. Open Mozilla Firefox. Go to FF menu button.
2. Select Add-ons & than select Extensions. (delete excess text)
3. Remove/Disable the Babylon Toolbar 1.5.0.
4. Restart your browser.
Remove Toolbar (from Add/Remove Programs)
1. Click the Start button on your computer.
2. Select Add-ons & than select Extensions. (delete excess text)
3. Select Programs and Features.
4. Select Babylon Toolbar from the Programs list.
5. Right click to uninstall.
6. Press YES on the popup message.
Remove Search Provider
1. Open Mozilla Firefox. Click on the Search bar, located on the right side of your address bar
2. Press the F4 key and select Manage Search Engines from the drop down list that appears.
3. Select Search the Web (Babylon) and click on the Remove button.
4. Click OK to save your changes.
Remove/Change Home Page:
5. Open Mozilla Firefox. Click on the FF menu button.
6. Select Options.
7. Now select the General tab.
8. In the section of the popup labeled "Home Page," insert the URL of your desired Home Page.
9. Click OK to save the changes.
Remove Babylon Search from New Tab
If when you open a new tab in Firefox, Babylon Search still appears:
1. Type in the address bar line about:config and press enter.
2. Confirm the popup message.
3. In the search field, type "browser.search.selectedEngine". (remove excess text here)
5. Restart your Browser.

How to create a Windows 8.1 Desktop icon from the Metro/Start and/or Search Tool?

I'm a Desktop user, but often find myself needing to go to the Metro/Start and Search Tool to find programs and App(let)s in order to run them. However, after doing this several times for many programs, I find myself wanting to create
Desktop icons to run the programs more easily. Is there a way to do this from the Metro/Start Icon and/or Search Tool results?
If not, Microsoft, please consider adding the ability to do this.
It would be very nice if this ability supported all of the icon types shown in the Metro/Start, Search Tool, and Control Panel interfaces, e.g.: Metro Apps, Desktop Programs, Charms, and Control Panel Applets.
Currently, there is a way to pin the Metro/Start Icon to the Desktop, but the Taskbar will get very cluttered with even only a handful icons.
It would be very nice if the desktop icon created by this also supported the context options that the program/app(let) now shows as Tasks when the icon is pinned to the Desktop Taskbar.
Additionally, it would be nice if I could also simply drag a Pinned Taskbar icon onto the Desktop area, again, retaining it's Tasks as context menu options when the Desktop Taskbar icon is right clicked.
This ability would be very helpful for people needing to get to programs and App(let)s, without having to resort the Metro/Start and Search Tool, because when there are a lot of Metro/Start icons, I have well over a hundred icons, it
can be very hard to find one simply eye-balling lot. The Search feature is much better, provided I know the name to look for and can remember it.
Finally, this ability would be very helpful, because the kinds of desktop shortcut icons that I can create using the New Shortcut option, assuming that can I find the program/App(let)'s name and path information, do not support the context options
that the icons could in Windows 7 when an icon is created while installing the program.
Thanks,
Howard Brown
hrb

Hi Howard Brown,
Thanks for your suggestions about Windows user experience. Actually, we are glad to hear more feedback
about Windows operating system so that we can improve Windows to make it be more easier to
use.
As a suggestion for your current situation, you can use Windows Charm Bar to search Apps, it is also easy to use.
Alex Zhao
TechNet Community Support

How to implement Quick Query and Saved Searches in ADF?

We are using 11gR2 ADF.
The requirement is to enable Quick Search and save the Searches.
In the Oracle ADF documentation, it is mentioned that
- Create a view with view criteria named.
- In the .jspx drag and drop the view criteria and Select Quick Query
Upon doing the above, we see that a Search panel is getting created, but with a message 'No Search Fields Added'.
In the named view criteria, Under 'UI Hints' we have set
-- execution mode as Both
-- Search region mode is Basic
-- Show Operators in Basic
Under 'Criteria Definition'
the attributes are added in a group with OR condition.
Thanks for your reply. Oracle ADF developer guide does not help!!
If you have any other documentation that helps in implementing this Quick Query and Saved Search, your help is greatly appreciated.

Set the following on your af:query component
SaveQueryMode = hidden
ModeChangeVisible = false
This should work for you ..
Regards,

I updated my iMac to 10.7.3 and about an hour later the screen began to flicker with a gray line on the upper side, and it also flicker green and red small pixel lines all over the screen, mainly green.

I updated my iMac to 10.7.3 and about an hour later the screen began to flicker with a gray line on the upper side, and it also flicker green and red small pixel lines all over the screen, mainly green. The computer froze with these pixels, so I shut it off and restarted it, and there were this green lines everywere. So I turned it off, and the next day I turned it on and it began to work just fine, but suddenly the same thing happened again, and when I restart the computer again there are these green and some red pixels everywere.
I've read 10.7.3 is giving people many problems, but I never saw that it gave one like this. How can I fix this, or what will Apple do to fix this problem they caused me with their update.
Thanks

Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

Mac Mail Version 6.0 (1486) has stopped recieving mesages regularly and the search doesn't work

Mac Mail Version 6.0 (1486) has stopped recieving mesages regularly and the search doesn't work.
Since installing Mountain Lion, Mail seems to be very unresponsive. I have mac mail running on an iMac (which works fine) and a 2012 MacbookPro which is the one having the issues with the Mail app. Both computers are running on Mountian Lion.
When I scroll up in Mail for instance, the frame rate drops to about 5 a second.
When I click on a message it doesn't display it in the preview pane. Which is very annoying!
But I can get around the issue by double clicking on a message and it opens up the message in a new window.
When I search for a message, nothing appears in the results. Even if Im searching for something that is defiently there, eg if I type in my name, you'd think some results would come up. But when I click on something else, the results dispaly for about half a second. Bizarre. Is anyone else having this problem?

what kind of error in browser you are seeing?
is search service application never starterd or its started but cannot crawl?
did you see the timer jobs related to search services and what's their status?
so what about the search results from site collection?
also make sure this service "SharePoint Search Host Controller Service" started on all servers in the farm.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
In the browser I receive the following error:
The search service app is running, doesn't crawl:
Yes, I can see the timer jobs related to search services, some of them are Succeded, others are Scheduled.
The service SharePoint Search Host Controller Service is started in the first server of the farm, but not in the second
one. When I try to start it, I receive the following error:
Windows could not start the Sharepoint Search Host Controller Service on Local Computer. Error 1067: The process terminated unexpectedly.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Problem in using quick and advanced search based on transient items

Hi everybody
I want to have an unbound string item in my form and allow users to use advanced search and quick search on that item.
I read the following post About advanced search and added a transient
item on view object and overrode the advance search method in application module and realized that the value of that string was
added to arguments.
Then I decided to add this transient item on entity object instead of view object so that we were able to add the item in one place and
use it in several view objects. I added an item in the entity and unchecked the persistent flag but I can't set queryable flag since it was disable.
I added the item in the view object and by use of application definition I forced the item to be shown in the advance search.
I generate the application and the item was shown correctly in the advanced search but when I set the item in advanced search its value
was not sent to advance search method.
Is it a bug ? (value of the field in the advanced search section was not sent to advanced search method )
Is it a way to add a queryable transient item in the entity object and still benefit from overriding advanced search method ?
I am using Jdeveloper 10.1.3 and Jheadstart 10.1.3.
Any help would be appreciated.
Best Regards
Navid

Navid,
JHeadstart checks whether the attribute definition is queryable before adding it to the list of advanced search attributes. A transient VO attribute can still be set to queryable, for a transient EO attribute this is not possible. We will remove this check on queryability in the upcoming patch release, since you have a valid use case. For now, you can subclass JhsSearchBean and override method createArgumentListForAdvancedSearch and comment out the check for "def.isQueryable()".
Steven Davelaar,
JHeadstart Team.

Advanced and Quick Search on UIX Pages

Hi all,
I have run into a situation on pages where I have the advanced and quick search enabled. Here's what is happening. You click on advanced search and search for a particular attribute. This works fine. Then you click on the button for quick search so that the advanced search view collapses. If you go to another page within the application and come back to the original page, the page is displayed with the advanced search view, even though when we left the page it was set to quick search. Any one have any ideas why this occuring or a workaround so that it doesn't happen? Thanks in advance.
Susan

Susan,
Switching between advanced search view and quick search view is done at the client using javascript. Only once a search is issued by pressing the Go or Find button, a request is sent to the server, and we are able to save the "search mode" state.
In 10.1.3 we have solved this by using Partial Page rendering rather then javascript.
Steven Davelaar,
JHeadstart Team.

Complex request with range filter and boolean search

Hi
I need a build and maintain complex requests to Oracle Endeca Server. These requests could include different types of attributes: string, datetime, int.
For string attributes I have created a search interface and use boolean search. For datetime attributes I use a range filter. Separately it works as I expected, but it fails with combined search with range filter and boolean search in a single request. As I see from results range filter is completely ignored. What could be wrong with following request?
<?xml version="1.0" ?>
<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
<S:Body>
<ns3:Request xmlns:ns2="http://www.endeca.com/MDEX/lql_parser/types" xmlns:ns3="http://www.endeca.com/MDEX/conversation/1/0">
<ns3:State/>
<ns3:Operator xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns3:RecordFilterOperator">
<ns3:RecordFilter Name="OnlyData">AND(NOT(mdex-property_Key),NOT(mdex-dimension_Key),NOT(mdex-config_Key),NOT(mdex-precedenceRule_Key),NOT(system-group_Key),NOT(system-group-membership_Key))</ns3:RecordFilter>
</ns3:Operator>
<ns3:Operator xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns3:SortOperator" Direction="Descending" Key="string_prop" OwnerId="Records"/>
<ns3:Operator xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns3:RangeFilterOperator">
<ns3:RangeFilter AttributeName="dateTime_prop">
<ns3:LowerBound Inclusive="true">2012-07-24T19:47:01Z</ns3:LowerBound>
</ns3:RangeFilter>
</ns3:Operator>
<ns3:Operator xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns3:SearchOperator">
<ns3:SearchFilter SnippetLength="20" EnableSnippeting="true" Mode="Boolean" Key="orderSearch">multiple_prop : one</ns3:SearchFilter>
</ns3:Operator>
<ns3:ContentElementConfig xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns3:RecordListConfig" HandlerFunction="RecordListHandler" HandlerNamespace="http://www.endeca.com/MDEX/conversation/1/0" Id="Records">
<ns3:RecordsPerPage>3</ns3:RecordsPerPage>
</ns3:ContentElementConfig>
</ns3:Request>
</S:Body>
</S:Envelope>
If my approach is incorrect could you provide me a a better way to handle such requests?
Regards,
Eugene.

Hi Eugene,
As you know, this issue has been discussed further, so I am posting here the summary of the findings, with the hope that this summary will benefit the Endeca Server user community at large.
* Boolean search only works with range filters for the AND operator. The documentation link above confirms this.
*Because of this restriction, you need to build another query that would achieve the same result. Both options are equally good and would achieve the results you need. Two suggestions that we've received were:
- Option 1. You could perform the key restriction of the search via a restrictive search interface rather than using the boolean match mode. This would involve creating a search interface for each field and then querying against the search interface for the field in question:
<Operator xmlns="http://www.endeca.com/MDEX/lql_parser/types" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="SearchOperator">
<SearchFilter SnippetLength="20" EnableSnippeting="true" Mode="All" Key="orderSearch_for_field_multiple_prop">one</SearchFilter>
</Operator>
For this option, you would have to create a search interface for each attribute, using the Config Web Service. Here is the topic about loading config documents into the Endeca Server:http://docs.oracle.com/cd/E29805_01/server.230/es_dev/toc.htm#Loading%20configuration%20documents
- Option 2
* You could implement the range filter through EQL row expression syntax instead and pass it in via the DataSourceFilterOperator, which acts as a prefilter on all other query logic, using the Conversation Web Service. Thus you might include:
<Operator xmlns="http://www.endeca.com/MDEX/lql_parser/types" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="DataSourceFilterOperator">
<DataSourceFilterString>dateTime_prop <= TO_DATETIME('2012-07-24T19:47:01Z')</DataSourceFilterString>
</Operator>
For this option, using the DataSourceFilter does not require you to model the rest of the query in EQL. It will perform slightly better than the filter in option 1 because of the order in which record set intersections are computed, but the difference is likely to be very small.
Finally, if this addresses your question, please mark this question as answered, so that others can benefit from it on the forum. Big thanks to Endeca Server development team (you know who you are!), for helping to find solutions for this request.
Julia
Edited by: JuliaM on Aug 30, 2012 2:05 PM
Edited by: JuliaM on Aug 30, 2012 2:06 PM

I am looking to upgrade my macbook pro 13". I have a new logic board and have searched for the spec on this i.e. hdd size and ram. will my 2009 screen work with a updated graphics card ??

I am looking to upgrade my macbook pro 13". I have a new logic board and have searched for the spec on this i.e. hdd size and ram. will my 2009 screen work with an updated graphics card ??

Sounds just like what was happening with my Alum MB. I took it in and they replaced my battery. It seems to be ok now. I don't know what it is, but my battery was fine before 10.5.6 and the same timeframe of the firmware updates when they came out.
My battery health was jumping around but was fine before all of this happened. Unfortunately at 381 cycles I don't think you have much chance of getting the battery for free. Perhaps you can complain about the battery saying it was fine until 10.5.6 or whatever. Not sure when your computer was made, but perhaps you are eligible for this program: http://www.apple.com/support/macbook_macbookpro/batteryupdate/

Counter negative cache hits and long searches

hi my name is sumit.
In my network there is a frame-relay pvc on 7206 VXR router on which 2 T1's are terminated(from S8700 EPABX) and the bandwidth of this PVC is 600 KBPS. we are using rtp and tcp header compression technique(codec g729r8).7206 router is connected to IGX through HSSI cable and there is a IGX to IGX connectivity from INDIA to US. At US site there is a same network. and it is further connected to AT&T cloud. mainly on this PVC there is inbound traffic which comes from US AT&T cloud.
we are facing a lot of voice quality issues and when i use show frame relay ip rtp header-compression.
the counter negative cache hits and long searches rapidly increases
can somebody help me to solve the problem.
and tell me is there any affect on voice quality if these counters rapidly increases

hi Neo thanks for reply.
r u from Datacraft ?
I am also from Datacraft
i have already used this URL. but it gives only one statement about counters.
but i am asking what could be an impact of these counters on voice ?
please reply
thanks

About search helps

Hi,
Can anybody please explain to me about search helps in details;i.e,both elementary and collective;with an example each??
Thanks in advance.
sumita

Hi Sumita,
Check this info.
Creating Elementary Search Helps
Procedure
In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
A dialog box appears in which you must select the type of search help.
Select Elementary search help and choose .
The maintenance screen for elementary search helps appears.
Enter an explanatory text in the field Short text.
You can for example find the search help at a later time using this short text.
In the Definition tab page enter the selection method of the search help.
You can enter the name of a table or a view (database view, projection view or help view) here. If you enter a table that has a text table, the name of the text table is automatically entered in the corresponding field.
Using the input help (F4 help), select fields of the selection method as parameter in the Search help parameter area. Select the fields that should be used in the dialog box for value selection or in the hit list.
If the selection method is a table that has a text table, both the fields of the table and the fields of the text table are offered in the input help.
The data element of the parameter is automatically copied from the selection method. The data element defines the output attributes and the F1 help of the parameter in the hit list and in the dialog box for value selection.
You can assign the parameter another data element. To do so, select the Mod flag. The Data element field is now ready for input. Then select a data element with the input help (F4 help). Only data elements whose data type, length and number of decimal places is the same as those of the previous data element can be assigned.
This removes the link between the data element of the search help parameter and the data element of the selection method field having the same name. If you cancel the Mod flag, the data element of the assigned table field is used again.
Define the attributes of the search help parameters.
Select the IMP flag if it is an import parameter. Select the EXP flag if it is an export parameter.
You can define the dialog for the input help with the fields LPos, SPos and SDis. Enter the parameter position in the hit list in LPos. If you enter nothing or the value 0 here, the parameter is not displayed in the hit list.
Enter the parameter position in the dialog box for value selection in SPos. If you enter nothing or the value 0 here, the parameter is not displayed in the dialog box for value selection.
Set the SDis flag if the parameter should be a pure display field in the dialog box for value selection. The user is thus informed that the contents of the parameter restrict the value, but he cannot change this restriction. This makes sense for example when the parameter is an import parameter or if it has a default value.
You can assign the parameter a default value in the Default value field.
Select the dialog type of the search help.
The dialog type defines how the hit list is displayed in the input help.
Save your entries.
A dialog box appears in which you have to assign the search help a development class.
Choose .
Do not forget to link the search help to a screen field. The search help attachment is not part of the search help definition; it is part of the object definition to which the search help is attached.
Result
The search help is activated. You can find information about the activation flow in the activation log, which you can display with Utilities ® Activation log. If errors occurred during activation, the activation log is automatically displayed.
Other Options
Assign a hot key: If the search help is to be accessed with a hot key, you must enter a one-place ID in the Hot key field. All the elementary search helps contained in a collective search help should have different short cuts.
Assign a search help exit: In exceptions, you might have to change the standard flow defined by the search help with a search help exit. In this case enter the name of the search help exit in the corresponding field.
Test the search help: You can test the flow of an input help defined by the elementary search help with . A dialog box appears in which you can simulate the behavior of the search help under different conditions. You can obtain information about the options provided in this window with.
Creating Collective Search Helps
Procedure
In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
A dialog box appears in which you must select the type of search help.
Select Collective search help and choose .
The maintenance screen for collective search helps is displayed.
Enter an explanatory text in the field Short text.
You can for example find the search help at a later time using this short text.
In the Definition tab page enter the parameters of the collective search help.
Select the Imp flag if it is an import parameter. Select the Exp flag if it is an export parameter.
Define the types for the parameters of a collective search help by assigning a data element. Enter the name of the data element that describes the contents of the search help parameter in the Data element field.
You can assign the parameter a default value in the Default value field.
In exceptions it could be necessary to change the standard process defined by the search help. You can implement the deviation from the standard using a search help exit.
In this case enter the name of the search help exit in the corresponding field.
On the Included search helps tab page, define the search helps that you want to include in the collective search help.
You can include elementary search helps and collective search helps.
Use the Hide flag to control whether an included search help should appear in the dialog box for selecting the elementary search help. If the flag is set, the search help is not offered.
It makes sense to hide search help inclusions if one or more search paths in the standard system should not be used in a concrete R/3 System. Similarly, search help inclusions can also be already hidden in the standard system because they only can be used meaningfully in a few R/3 Systems. You have to cancel the flag in this case.
Position the cursor one after the other on each allocated search help and choose Parameter assignment.
In the next screen, enter the parameter names of the elementary search helps to which the corresponding parameters of the collective search help should be assigned in the field Reference parameter.
You can select the parameters contained in the included search help using the input help. Create a proposal for the assignment with Proposal.
Save your entries.
A dialog box appears in which you have to assign a development class to the search help.
Choose .
Result
The collective search help is activated. You can find information about the activation flow in the activation log, which you can display with Utilities ® Activation log. If errors occurred when the collective search help was activated, the activation log is automatically displayed.
Do not forget to link the search help to a screen field. The search help attachment is not part of the search help definition; it is part of the object definition to which the search help is attached.
Other Options
You can test the flow of an input help defined by the collective search help with . A dialog box appears in which you can simulate the behavior of the search help under different conditions. You can obtain information about the options provided in this window with .
First create ELEMENTARY SEARCHHELP YSEARCH32 in R/3 Data dictionary
Create one more elementary search help YSEARCH33
Now define collective search help for the above 2 elementary search helps. In definition part include the search help parameters which you want to display in the search help.
Enter the included search helps i.e YSEARCH32,YSEARCH33.
Press the Parameter Assignment for search help BUTTON.You have to assign one parameter with the parameters in the definition part
Same case with the YSEARCH33.
Activate the collective search help.
Apply this search help in the program and if F4 button is pressed the collection of elementary search helps are displayed.
Creating dynamic search help means the f4 help will come on the context bases.
that will achieved with two function modules.
1. F4IF_INT_TABLE_VALUE_REQUEST Display internal table as search help (documented in SAP)
2.F4IF_*_VALUE_REQUEST
u will provide the search help on the field dynamically depending on program context.
REPORT ZTEST_F4HELP                              .
*---Report with selection screen and to display the list of
possible entries for field 'B' as per the value in field 'A'.
parameters: p_vbeln type vbak-vbeln,
            p_posnr type vbap-posnr.
at selection-screen on value-request for p_posnr.
data: begin of help_item occurs 0,
          posnr type vbap-posnr,
          matnr type vbap-matnr,
          arktx type vbap-arktx,
        end of help_item.
data: dynfields type table of dynpread with header line.
dynfields-fieldname = 'P_VBELN'.
append dynfields.
call function 'DYNP_VALUES_READ'
       exporting
            dyname               = sy-cprog
            dynumb               = sy-dynnr
            translate_to_upper   = 'X'
       tables
            dynpfields           = dynfields
       exceptions
            invalid_abapworkarea = 1
            invalid_dynprofield = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription = 6
            invalid_parameter    = 7
            undefind_error       = 8
            double_conversion    = 9
            stepl_not_found      = 10
            others               = 11.
read table dynfields with key fieldname = 'P_VBELN'.
p_vbeln = dynfields-fieldvalue.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
       exporting
            input = p_vbeln
       importing
            output = p_vbeln.
select posnr matnr arktx into table help_item
                 from vbap
                      where vbeln = p_vbeln.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
       exporting
            retfield    = 'POSNR'
            dynprofield = 'P_POSNR'
            dynpprog    = sy-cprog
            dynpnr      = sy-dynnr
            value_org   = 'S'
       tables
            value_tab   = help_item.
Hope this resolves your query.
Reward all the helpful answers.
Regards

IFS WITHIN and ABOUT search operators

Similar Messages

Maybe you are looking for