IISRESET and Thread Process Issue

Hi,
IISRESET command not killing the process associated with the application that are in that pool.
Server : Windows 2012 R2
I have tried below command but its not closing the process associated with the application.
iisreset
net stop iisadmin /y
net stop w3svc /y
Thanks - Lalgy

Hi,
You can try recycling the App pool which will stop and start the process associated with the applications.
Follow the below link which explains the same.
http://technet.microsoft.com/en-us/library/cc770764%28v=ws.10%29.aspx
http://fullsocrates.wordpress.com/2012/07/25/iisreset-vs-recycling-application-pools/
Regards,
Santhosh.
www.jijitechnologies.com

Similar Messages

ClassNotFoundException in EJB's and Threads (Classloader issue)

A very interesting bug has cropped up in WebLogic 6.1. When a J2EE
application packaged appropriately, a client application running in a
user-created Thread will always throw a ClassNotFoundException when
attempting to get back a user-created object from an EJB living on
another cluster. This error does not happen when the call is being made
from outside a Thread.
Sounds strange, I know, so I'll try to give everyone as much detail as
possible so they can avoid this bug, and so that the folks at BEA can
fix it.
* A java class running inside a clustered WL6.1 server is attempting to
reference an EJB on another clustered WL 6.1 server. Accessing the bean
is not a problem, the client class is able to obtain a remote reference
to the bean and make method calls on it. Calling a method causes the
following stack trace:
2002-01-11 10:36:57,331 [Thread-4] ERROR
wpni.app.mywp.display.DisplayJobs$JobsMonitor -
wpni.app.mywp.display.DisplayJobs$JobsMonitor.run: Error checking Jobs
status.
java.rmi.UnmarshalException: failed to unmarshal class
wpni.app.jobs.JobsData; nested exception is:
java.lang.ClassNotFoundException: wpni.app.jobs.JobsData: This
error could indicate that a component was deployed on a cluster member
but not other members of that cluster. Make sure that any component
deployed on a server that is part of a cluster is also deployed on all
other members of that cluster
java.lang.ClassNotFoundException: wpni.app.jobs.JobsData: This error
could indicate that a component was deployed on a cluster member but
not other members of that cluster. Make sure that any component deployed
on a server that is part of a cluster is also deployed on all other
members of that cluster
at
weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:146)
at
weblogic.rjvm.MsgAbbrevInputStream.readClassDescriptor(MsgAbbrevInputStream.java:211)
at
weblogic.common.internal.ChunkedObjectInputStream$NestedObjectInputStream.readClassDescriptor(ChunkedObjectInputStream.java:290)
at
java.io.ObjectInputStream.inputClassDescriptor(ObjectInputStream.java:906)
at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:366)
at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:236)
at
java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1186)
at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:386)
at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:236)
at
weblogic.common.internal.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:107)
at
weblogic.common.internal.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:115)
at weblogic.rmi.internal.ObjectIO.readObject(ObjectIO.java:56)
at
weblogic.rmi.internal.BasicRemoteRef.unmarshalReturn(BasicRemoteRef.java:230)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:254)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:220)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy140.getJobsData(Unknown Source)
at
wpni.app.mywp.display.DisplayJobs$JobsMonitor.run(DisplayJobs.java:48)
at java.lang.Thread.run(Thread.java:484)
* The class that is not found (JobsData) is definitely in the EAR file
on both the client cluster and the server cluster, and in the
appropriate location.
* When we attempted to run the code outside of a Thread, everything
worked perfectly, so it was definitely the Thread that was causing the
problem.
* Deploying the EJB on the client cluster did not do anything to solve
the problem.
* Adding the JobsData to the System CLASSPATH at the startup of the
WebLogic server DID solve the problem. But of course that defeats the
purpose of packaging everything in the EAR file.
So, the conclusion seems to be that when DisplayJobs$JobsMonitor kicked
off the Thread, the Thread should have been created in either the WAR's
classloader or the JAR's classloader (wouldn't matter, since the
JobsData class is in the JAR's classloader, which is a parent of the
WAR's classloader). But instead, the Thread is being created in the
System classloader, which can't find the JobsData class!
We believe that any Thread created by a class living within an EAR's
classloader should remain within that same classloader, and not migrate
to any other classloader, in order to avoid situations like this. We're
opening a case with BEA to attempt to get this resolved. In the
meantime, we recommend to developers that if they have to make
cross-cluster RMI calls from inside user-created Threads, that they only
attempt to receive primitive types or standard JDK objects. Otherwise,
you'll have to add the classes to the System CLASSPATH at startup of the
WebLogic instance.
Thanks,
Erin
* "[White House spokeperson Ari] Fleischer
* warned Democrats this morning against
* investigations into the Bush administration's
* dealings with Enron. 'The American people
* are tired of partisan witch hunts and endless
* investigations,' he said." [Ed.: Uh... ]
* www.washingtonpost.com/wp-dyn/articles/A25159-2002Jan10.html
* Erin Reid Myers, Chief Architect
* WashingtonPost.Newsweek Interactive
* [email protected]
* Work: (703) 469-3154
* Cell: (703) 725-3050
[att1.html]

Things can go seriously wrong if your application uses user threads (violating
EJB spec programming restrictions and BEA recommendations).
I'm curious, does it work if you enable network classloading on the server
which invokes remote EJB (in config.xml -
<Server NetworkClassLoadingEnabled="true" ...
</Server>
Erin Reid Myers <[email protected]> wrote:
A very interesting bug has cropped up in WebLogic 6.1. When a J2EE
application packaged appropriately, a client application running in a
user-created Thread will always throw a ClassNotFoundException when
attempting to get back a user-created object from an EJB living on
another cluster. This error does not happen when the call is being made
from outside a Thread.
Sounds strange, I know, so I'll try to give everyone as much detail as
possible so they can avoid this bug, and so that the folks at BEA can
fix it.
* A java class running inside a clustered WL6.1 server is attempting to
reference an EJB on another clustered WL 6.1 server. Accessing the bean
is not a problem, the client class is able to obtain a remote reference
to the bean and make method calls on it. Calling a method causes the
following stack trace:
2002-01-11 10:36:57,331 [Thread-4] ERROR
wpni.app.mywp.display.DisplayJobs$JobsMonitor -
wpni.app.mywp.display.DisplayJobs$JobsMonitor.run: Error checking Jobs
status.
java.rmi.UnmarshalException: failed to unmarshal class
wpni.app.jobs.JobsData; nested exception is:
java.lang.ClassNotFoundException: wpni.app.jobs.JobsData: This
error could indicate that a component was deployed on a cluster member
but not other members of that cluster. Make sure that any component
deployed on a server that is part of a cluster is also deployed on all
other members of that cluster
java.lang.ClassNotFoundException: wpni.app.jobs.JobsData: This error
could indicate that a component was deployed on a cluster member but
not other members of that cluster. Make sure that any component deployed
on a server that is part of a cluster is also deployed on all other
members of that cluster
at
weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:146)
at
weblogic.rjvm.MsgAbbrevInputStream.readClassDescriptor(MsgAbbrevInputStream.java:211)
at
weblogic.common.internal.ChunkedObjectInputStream$NestedObjectInputStream.readClassDescriptor(ChunkedObjectInputStream.java:290)
at
java.io.ObjectInputStream.inputClassDescriptor(ObjectInputStream.java:906)
at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:366)
at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:236)
at
java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1186)
at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:386)
at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:236)
at
weblogic.common.internal.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:107)
at
weblogic.common.internal.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:115)
at weblogic.rmi.internal.ObjectIO.readObject(ObjectIO.java:56)
at
weblogic.rmi.internal.BasicRemoteRef.unmarshalReturn(BasicRemoteRef.java:230)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:254)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:220)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy140.getJobsData(Unknown Source)
at
wpni.app.mywp.display.DisplayJobs$JobsMonitor.run(DisplayJobs.java:48)
at java.lang.Thread.run(Thread.java:484)
* The class that is not found (JobsData) is definitely in the EAR file
on both the client cluster and the server cluster, and in the
appropriate location.
* When we attempted to run the code outside of a Thread, everything
worked perfectly, so it was definitely the Thread that was causing the
problem.
* Deploying the EJB on the client cluster did not do anything to solve
the problem.
* Adding the JobsData to the System CLASSPATH at the startup of the
WebLogic server DID solve the problem. But of course that defeats the
purpose of packaging everything in the EAR file.
So, the conclusion seems to be that when DisplayJobs$JobsMonitor kicked
off the Thread, the Thread should have been created in either the WAR's
classloader or the JAR's classloader (wouldn't matter, since the
JobsData class is in the JAR's classloader, which is a parent of the
WAR's classloader). But instead, the Thread is being created in the
System classloader, which can't find the JobsData class!
We believe that any Thread created by a class living within an EAR's
classloader should remain within that same classloader, and not migrate
to any other classloader, in order to avoid situations like this. We're
opening a case with BEA to attempt to get this resolved. In the
meantime, we recommend to developers that if they have to make
cross-cluster RMI calls from inside user-created Threads, that they only
attempt to receive primitive types or standard JDK objects. Otherwise,
you'll have to add the classes to the System CLASSPATH at startup of the
WebLogic instance.
Thanks,
Erin
* "[White House spokeperson Ari] Fleischer
* warned Democrats this morning against
* investigations into the Bush administration's
* dealings with Enron. 'The American people
* are tired of partisan witch hunts and endless
* investigations,' he said." [Ed.: Uh... ]
* www.washingtonpost.com/wp-dyn/articles/A25159-2002Jan10.html
* Erin Reid Myers, Chief Architect
* WashingtonPost.Newsweek Interactive
* [email protected]
* Work: (703) 469-3154
* Cell: (703) 725-3050
Dimitri

Parallel function call and thread issue

Sorry to post one issue here which is related to code. i was debugging a code which was wrote long time back by one developer. the issue is two function is called parallel using thread and one function set a variable true at end and another function just
looping until the variable is set to true. the variable value is not getting set to true. here i am posting a code snippet and just tell me what is mistake in the code for which variable is not getting set to true by first function.
when user click button then two function is invoked
private void UPDATE_Click(object sender, System.EventArgs e)
SavedFirst();
AddCheckThread();
public void SavedFirst()
IsOpen = true;
System.Threading.Thread loadT = new System.Threading.Thread(new System.Threading.ThreadStart(SaveAll));
loadT.Start();
IsOpen = false;
private void AddCheckThread()
if (!ALLFlag)
loadingThread = new System.Threading.Thread(new System.Threading.ThreadStart(addCheck));
loadingThread.Priority = System.Threading.ThreadPriority.Lowest;
loadingThread.Start();
private void SaveAll()
if (this.InvokeRequired)
this.Invoke(new MethodInvoker(delegate
ALLFlag = false;
if (!ALLFlag)
loadingThread = new System.Threading.Thread(new System.Threading.ThreadStart(AddProducts));
loadingThread.Priority = System.Threading.ThreadPriority.Lowest;
loadingThread.Start();
return;
private void AddProducts()
if (this.InvokeRequired)
this.Invoke(new MethodInvoker(delegate
ALLFlag = false;
if (System.Windows.Forms.MessageBox.Show(this, "Would you like to add the details into the Database?", "Add?", System.Windows.Forms.MessageBoxButtons.YesNo) == System.Windows.Forms.DialogResult.Yes)
if (comboOUR.SelectedItem == null || comboCountry.SelectedItem == null || comboSelleble.SelectedItem == null || txtOereff.Text == "" || txtUKPrice.Text == "" || txtUSPrice.Text == "" || txtSUrCharge.Text == "" || txtOURUS.Text == "" || txtOURUK.Text == "")
FormValidation();
else
Gather_Data();
bool isInserted = false;
if (System.Windows.Forms.MessageBox.Show(this, "Would you like to add the details into \"Detailed-Product\" Too?", "Add?", System.Windows.Forms.MessageBoxButtons.YesNo) == System.Windows.Forms.DialogResult.Yes)
isInserted = bbaProduct.BBASaveProduct();
if (isInserted == true)
isInserted = false;
isInserted = bbaProduct.InsertInProductTable(BBAProduct.DetailProductID);
if (isInserted == true)
System.Windows.Forms.MessageBox.Show(this, "Product Successfully Added ", "Add");
else
System.Windows.Forms.MessageBox.Show(this, "Error Occurred !! Not Added Into the Database ", "Add");
else
System.Windows.Forms.MessageBox.Show(this, "Error Occurred !! Not Added Into the Database ", "Add");
else
isInserted = bbaProduct.InsertInProductTable(0);
if (isInserted == true)
System.Windows.Forms.MessageBox.Show(this, "Successfully Inserted Into the database", "Add");
else
System.Windows.Forms.MessageBox.Show(this, "Error Occurred !! Not Added Into the Database", "Add");
else
System.Windows.Forms.MessageBox.Show(this, "Process Cancelled By The User", "Add");
ALLFlag = true;
return;
#region Add Check
private void addCheck()
if (this.InvokeRequired)
this.Invoke(new MethodInvoker(delegate
this.Opacity = 0.8;
axShockwaveFlash1.Visible = true;
axShockwaveFlash1.Play();
while (!ALLFlag)
int x = 0;
axShockwaveFlash1.Visible = false;
axShockwaveFlash1.Visible = false;
axShockwaveFlash1.StopPlay();
this.Opacity = 1;
ALLFlag = false;
loadingThread.Abort();
return;
help me to locate where is the mistake for which ALLFlag value is not getting set to true. thanks

Your reliance on a field value across threads isn't going to work reliably. In a multi-core/multi-threaded world the memory model allows for reading data out of order for optimization reasons. Additionally the CPU can and will cache recently
used data in memory that isn't shared across processors. This can get you into trouble as you will not be reading the same value across processors.
The only correct way to ensure that multiple threads access the same data correctly is to use sync objects that are designed for that such as a Semaphore or Mutex. Sync objects allow you to safely share data across threads.
Overall your code appears to be trying to update the UI using a thread but since it is calling Invoke each time you are basically spawning a thread that then blocks waiting for the UI thread. You could pretty much eliminate your issues by getting rid
of the threading calls altogether along with any sort of state management variables that were arbitrarily created (ALLflags) and simply use BeginInvoke. You didn't post who was calling your higher level save methods but if it is a UI element then BeginInvoke
and InvokeRequired are completely redundant as is all the threading.
You can cleanly update this code to eliminate all the extra variables and threading and simply use the newer async/await functionality to help resolve the issues your code is having. But you still have problems with the invoked code. In one of
the methods you are looping while waiting for a variable to be set. But since you invoked it then it is occurring on the UI thread. Because it is on the UI thread and that can only do 1 thing at a time, if ALLflag is false your code will deadlock.
The only other code that would set it to true cannot run because it is also invoked on the UI thread and only one of them can run at any one time. Basically each of your threads are going to try to run on the same thread and only 1 of them will be able
to. Until the first thread method finishes the second one will never run.
If you need Boolean flags then consider using a ManualResetEvent instead. It is thread safe, works across threads and doesn't have any of the problems of a Boolean field when talking about threading. But you still have a deadlock between your invoked
code that nothing will solve except rewriting your code.
Michael Taylor
http://blogs.msmvps.com/p3net

Understanding asynchronous BPEL processes and threading

Hi everybody,
I have a question regarding asynchronous BPEL processes and threading.
I have an asynchronous BPEL process which delivers a message (picked up from a JMS topic) to a repository (via for instance an ICAN server). This transaction must be time-sensitive, i.e. first-in is first-out.
If I have several threads running concurrently I have no guarantee that the messages are delivered in the same order that they where generated. It seems that the suggested way around this problem is to use single-threading.
So here's the part that I do not understand:
An asynchronous request does not wait for a response. If I use single-threading then what happens to that single-thread if for some reason (for instance the ICAN server is not responding) the BPEL instance is dehydrated? Is the thread still allocated for waiting for the first response or does it go back and pick up the next thing on the topic? If the next thing on the topic is picked up then how can I be sure that the messages are delivered in the correct order? If the thread is still allocated to the single instance then does that not kindda go against the whole concept of an asynchronous process?
I hope some one can explain this to me.
Thank you in advance.
Kind regards,
Mathias
PS. This question is an attempt of a different angle on another forum thread: Asynchronuos BPEL - how to get the order of messages right?

Hi again,
A quick follow up question:
Is there any way to have several BPEL processes running on the same server with different settings for how many threads to use?
It seems that the only way to set number of threads used by BPEL is to use the configuration in the BPEL console? This is an domain setting - which means that all processes deployed to the server is effected the same way?
I am asking because I am facing a scenario where I need one BPEL process to read from a AQ queue (well actually a topic) with a single thread and another BPEL process - deployed to the same BPEL server - to read from the same AQ queue with multiple threads.
Does anyone have any idea of how to do this? Can it be done?
Any suggestions, hints or reference to any documentation would be very much appreciated.
Thank you in advance,
Aagaard

Process and Thread

I am new to the servlet and JSP technology.It is said that "Servlets and CGI differ mainly in Process and Thread.CGI used processes and Servlet technology uses Threads".I would like to know what exacly is the meaning of a process and a thread.How do we say that a process uses higher resources and hence a higher resource and memory overhead.
What do we exactly mean by thread and how r they using less resources?When we say Thread t=new Thread(); what exactly is happening inside?

A thread runs with in the context of the JVM process.
http://java.sun.com/docs/books/tutorial/essential/threads/definition.html
A process is the running of an executable. A cgi can be a C .exe file or a perl script run under perl.exe.
The thread is faster because the jvm process has been loaded into memory and initialized. For each cgi call the operating system has to load the code into memeory and intialize all the variables and resources.
http://c2.com/cgi/wiki?CgiVsServlet
http://www.disc.com/jdbcserv.html

Process and threads

Dear community
Very kindly pleasant about information that is fiber in thread process and threads it interface between user and application ?
is this answer on user ask in application run ?
About any advises who concerns this matter , please .

Hello RB_1.
You can find more informations about fibers
here and
here on the MSDN Library.
Bye.
Luigi Bruno
MCP, MCTS, MOS, MTA

OracleIAS and Information about Process and Threads

Hi all,
I need to know information about the running process and threads inside a Conteiner or an Enterprise Application, is it possible?
Thanks in advance.

Hi,
Probably all of mentioned in some extent - depends, which data system needs.
regards,
wojciech

Issues with CAL Free Solution - SAP BPM and Operational Process Intelligence on SAP HANA [developer edition]

Hi,
When I want to suscribe to the CAL Free Solution - SAP BPM and Operational Process Intelligence on SAP HANA, on the Terms and conditions page, even if I scroll down, the button "I accept" is not available.
Do you have any tips ?

I am trying to download the SAP BPM and Operational Process Intelligence on SAP HANA [trial edition] - AWS version and get a security error.
Any ideas where we can get a 90 demo version of SAP PO/PI that will work with AWS? I am trying to refresh myself on PI7.4?

JRun Thread Pool Issue

I'm running CF 9.0.1 on Ubuntu on an "Medium" Amazon EC2 instance. CF has been crashing intermittently (several times per day). At such times, running top gets me this (or something similar):
PID
USER
PR
NI
VIRT
RES
SHR
S
%CPU
%MEM
TIME+COMMAND
15855
wwwrun
20
0
1762m
730m
20m
S
99.3
19.4
13:22.96 coldfusion9
So, it's obviously consuming most of the server resources. The following error has been showing up in my cfserver.log in the leadup to each crash:
java.lang.RuntimeException: Request timed out waiting for an available thread to run. You may want to consider increasing the number of active threads in the thread pool.
If I run /opt/coldfusion9/bin/coldfusion status, I get:
Pg/Sec DB/Sec CP/Sec Reqs Reqs Reqs AvgQ   AvgReq AvgDB Bytes Bytes
Now Hi Now Hi Now Hi Q'ed Run'g TO'ed Time   Time   Time   In/Sec Out/Sec
0   0   0   0   -1 -1 150   25    0     0      -1352560      0      0
In the administrator, under Server Settings > Request Tuning, the setting for Maximum number of simultaneous Template requests is 25. So this makes sense so far. I could just increase the thread pool to cover these sort of load spikes. I could make it 200. (Which I did just now as a test.)
However, there's also this file /opt/coldfusion9/runtime/servers/coldfusion/SERVER-INF/jrun.xml. And some of the settings in there appear to conflict. For example, it reads:
<service class="jrunx.scheduler.SchedulerService" name="SchedulerService">
<attribute name="bindToJNDI">true</attribute>
<attribute name="activeHandlerThreads">25</attribute>
<attribute name="maxHandlerThreads">1000</attribute>
<attribute name="minHandlerThreads">20</attribute>
<attribute name="threadWaitTimeout">180</attribute>
<attribute name="timeout">600</attribute>
</service>
Which a) has fewer active threads (what does this mean?), and b) has a max threads that exceed the simultaneous request limit set in the admin. So, I'm not sure. Are these independent configs that need to be made to match manually? Or is the jrun.xml file supposed to be written by the CF Admin when changes are made there? Hmm. But maybe this is different because presumably the CF Scheduler should only use a subset of all available threads, right...so we'd always have some threads for real live users. We also have this in there:
<service class="jrun.servlet.http.WebService" name="WebService">
<attribute name="port">8500</attribute>
<attribute name="interface">*</attribute>
<attribute name="deactivated">true</attribute>
<attribute name="activeHandlerThreads">200</attribute>
<attribute name="minHandlerThreads">1</attribute>
<attribute name="maxHandlerThreads">1000</attribute>
<attribute name="mapCheck">0</attribute>
<attribute name="threadWaitTimeout">300</attribute>
<attribute name="backlog">500</attribute>
<attribute name="timeout">300</attribute>
</service>
This appears to have changed when I changed the CF Admin setting...maybe...but it's the activeHandlerThreads that matches my new maximum simulataneous requests setting...rather than the maxHandlerThreads, which again exceeds it. Finally, we have this:
<service class="jrun.servlet.jrpp.JRunProxyService" name="ProxyService">
<attribute name="activeHandlerThreads">200</attribute>
<attribute name="minHandlerThreads">1</attribute>
<attribute name="maxHandlerThreads">1000</attribute>
<attribute name="mapCheck">0</attribute>
<attribute name="threadWaitTimeout">300</attribute>
<attribute name="backlog">500</attribute>
<attribute name="deactivated">false</attribute>
<attribute name="interface">*</attribute>
<attribute name="port">51800</attribute>
<attribute name="timeout">300</attribute>
<attribute name="cacheRealPath">true</attribute>
</service>
So, I'm not certain which (if any) of these I should change and what exactly the relationship is between maximum requests and maximum threads. Also, since several of these list the maxHandlerThreads as 1000, I'm wondering if I should just set the maximum simultaneous requests to 1000. There must be some upper limit that depends on available server resources...but I'm not sure what it is and I don't really want to play around with it since it's a production environment.
I'm not sure if it pertains to this issue at all, but when I run a ps aux | grep coldfusion I get the following:
wwwrun   15853 0.0 0.0   8704   760 pts/1
S
20:22   0:00 /opt/coldfusion9/runtime/bin/coldfusion9 -jar jrun.jar -autorestart -start coldfusion
wwwrun   15855 5.4 18.2 1678552 701932 pts/1
Sl
20:22   1:38 /opt/coldfusion9/runtime/bin/coldfusion9 -jar jrun.jar -start coldfusion
There are always these two and never more than these two processes. So there does not appear to be a one-to-one relationship between processes and threads. I recall from an MX 6.1 install I maintained for many years that additional CF processes were visible in the process list. It seemed to me at the time like I had a process for each thread...so either I was wrong or something is quite different in version 9 since it's reporting 25 running requests and only showing these two processes. If a single process can have multiple threads in the background, then I'm given to wonder why I have two processes instead of one...just curious.
So, anyway, I've been experimenting while composing this post. As noted above I adjusted the maximum simulataneous requests up to 200. I was hoping this would solve my problem, but CF just crashed again (rather it slogged down and requests started timing out...so effectively "crashed"). This time, top looked similar (still consuming more than 99% of the CPU), but CF status looked different:
Pg/Sec DB/Sec CP/Sec Reqs Reqs Reqs AvgQ   AvgReq AvgDB Bytes Bytes
Now Hi Now Hi Now Hi Q'ed Run'g TO'ed Time   Time   Time   In/Sec Out/Sec
0   0   0   0   -1 -1 0     150   0     0      0      0      0      0
Obviously, since I'd increased the maximum simultaneous requests, it was allowing more requests to run simultaneously...but it was still maxing out the server resources.
Further experiments (after restarting CF) showed me that the server became unusably slogged after about 30-35 "Reqs Run'g", with all additional requests headed for an inevitible timeout:
Pg/Sec DB/Sec CP/Sec Reqs Reqs Reqs AvgQ   AvgReq AvgDB Bytes Bytes
Now Hi Now Hi Now Hi Q'ed Run'g TO'ed Time   Time   Time   In/Sec Out/Sec
0   0   0   0   -1 -1 0     33    0     0      -492   0      0      0
So, it's clear that increasing the maximum simultaneous requests has not helped. I guess what it comes down to is this: What is it having such a hard time with? Where are these spikes coming from? Bursts of traffic? On what pages? What requests are running at any given time? I guess I simply need more information to continue troubleshooting. If there are long-running requests, or other issues, I'm not seeing it in the logs (although I do have that option checked in the admin). I need to know which requests exactly are those responsible for these spikes. Any help would be much appreciated. Thanks.
~Day

I really appreciate your help. However, I haven't been able to find the JRun Thread settings you describe above.
Under Request Tuning, I see:
Server Settings > Request Tuning
Request Limits
Maximum number of simultaneous Template requests
Restricts the number of simultaneously processed requests. Use this setting to increase overall system performance for heavy load applications. Requests beyond the specified limit are queued. On Standard Edition, you must restart ColdFusion to enable this setting.
Maximum number of simultaneous Flash Remoting requests
The number of Flash Remoting requests that can be processed concurrently.
Maximum number of simultaneous Web Service requests
The number of Web Service requests that can be processed concurrently.
Maximum number of simultaneous CFC function requests
The number of ColdFusion Component methods that can be processed concurrently via HTTP. This does not affect invocation of CFC methods from within CFML, only methods requested via an HTTP request.
Tag Limit Settings
Maximum number of simultaneous Report threads
The maximum number of ColdFusion reports that can be processed concurrently.
Maximum number of threads available for CFTHREAD
The maximum number of threads created by CFTHREAD that will be run concurrently. Threads created by CFTHREAD in excess of this are queued. On Standard Edition, the maximum limit is 10.
And under Java and JVM, I see:
Server Settings > Java and JVM
    Java and JVM settings control the way ColdFusion starts the Java Virtual Machine when it starts. You can control settings like what classpaths are used and how memory is allocated as well as add custom command line arguments. Changing these settings requires restarting ColdFusion. If you enter an incorrect setting, ColdFusion may not restart properly.
   Backups of the jvm.config file are created when you hit the submit button. You can use this backup to restore from a critical change.
   Java Virtual Machine Path
Specifies the location of the Java Virtual Machine.
   Minimum JVM Heap Size (MB)         Maximum JVM Heap Size (MB)
   The Memory Size settings determine the amount of memory that the JVM can use for programs and data.
   ColdFusion Class Path
Specifies any additional class paths for the JVM, with multiple directories separated by commas.
   JVM Arguments
-server -Dsun.io.useCanonCaches=false -XX:MaxPermSize=192m -XX:+UseParallelGC -Xbatch -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib
Specifies any specific JVM initialization options, separated by spaces.
I did go take a look at FusionReactor and found it's not free (which would be fine, of course, if it would actually help). It looks like there's a fully functional demo, which is cool...but I've haven't been able to get it to install yet, so we'll see.
Thanks again!
~Day
(By the way, I've cross-posted this inquiry on StackOverflow. So if you're able to help me arrive at a solution you might want to answer there as well.)

RDBMS non-thread-safe issue

<snip>
This (as you probably know) is due to the fact that the code provided by
most of the DB vendors is not thread safe.
<snip>
Sean's comment, above, speaks to an issue that is causing some concern
within my (large - 180 projects in development) organisation.
May I please ask the forum if there are others out there who have an
understanding of / concern with this "problem"?
My perception (quite possibly flawed) of the "problem" is that the RDBMS
cannot multi-thread data access objects. So we find ourselves in a situation
where we can achieve scaleability in just about all other
performance-sensitive areas of a system's technical architecture (we're
using DCE -- but have found that Encina is not advisable except where there
is a true requirement for heterogeneous distributed 2 phase commit, which we
don't often see.....) but when we go to hit on the RDBMS, we go back to good
ole single-threading.
In certain circumstances, this shortfall of RDBMS technology -- I won't
mention any names, of course, but the initials are "Oracle" -- seems to be
hindering our achievement of a desired technical architecture.
Is this a "Pro*C / PL/SQL stored procedures" problem or is it something that
is in the RDBMSs' DNA?
How can we get around it?
Any comments?
Regards
Jon

Jon
I agree. But it is the best solution within the constraints of existing
technology. At least we don't use a process per client. 10 replicated
copies of a service could service the needs of 100 clients.
Eric
>
At 13:15 6/09/96 EST, you wrote:
Eric
Thanks for your response. Yep. I realise that the issue I've presented is
clearly not something that Forte causes or is responsible for in any way.
Forte can, as you've pointed out, actually help in this area. But I don't
think that getting Forte to spawn another instance of a data access server
is really the best solution. Ie, that's not what we tend to have in mind
when we think about "scaleability". The best solution is -- perhaps -- to
get the RDBMS people to thread-safe all code and libraries. I have pointedly
asked Oracle for a position on this -- and got the usual blank stare.
I also considered whether people might get upset at me for posting what is
clearly a non-Forte-specifc question in a Forte forum. But then I went ahead
and did it anyway. Justification being (assumption follows) that the kind of
people who hang out on the Forte forum may tend to be more
architecture-oriented than your run of the mill VB / SQL*Net / PL/SQL stored
procedures kinda guy/gal, and may be using or considering Forte (plug for
Forte follows) precisely because it clearly enables a superior architecture.
Should proably post to the comp.database.oracle forum, but I just don't know
them as well.
Regards
Jon
From: Eric Gold
To: McLeod, Jon
Cc: [email protected]
Subject: Re: RDBMS non-thread-safe issue
Date: Friday, 6 September 1996 11:21AM
Jon
In response to this message.....read below...
Sean's comment, above, speaks to an issue that is causing some concern
within my (large - 180 projects in development) organisation.
May I please ask the forum if there are others out there who have an
understanding of / concern with this "problem"?
My perception (quite possibly flawed) of the "problem" is that the RDBMS
cannot multi-thread data access objects. So we find ourselves in a situation
where we can achieve scaleability in just about all other
performance-sensitive areas of a system's technical architecture (we're
using DCE -- but have found that Encina is not advisable except where there
is a true requirement for heterogeneous distributed 2 phase commit, which we
don't often see.....) but when we go to hit on the RDBMS, we go back to good
ole single-threading.
In certain circumstances, this shortfall of RDBMS technology -- I won't
mention any names, of course, but the initials are "Oracle" -- seems to be
hindering our achievement of a desired technical architecture.
Is this a "Pro*C / PL/SQL stored procedures" problem or is it something that
is in the RDBMSs' DNA?
How can we get around it?
Any comments?Jon,
Go ahead ask the Forum any questions you want. This "problem"
is not a problem in Forte. What we allow you to do is "replicate" your
data access services so that each one runs inside its own
process. Each one of these processes (aka partitions) has its
own connection to the database. The routing to the replicated
partitions is transparent to the clients. Clients send a
message like "DatabaseService.GetCustomer()" and then the Forte
router sees which replicated copy of the service is not currently
processing a request and routes it to that free replicate. You
can dynamically increase or decrease the number of replicated
copies of the service easily.
We call this feature "load balancing" in Forte. It is achieved
by checking a box in the data access service object definition.
You can dynamically increase/decrease the number of replicates
and also dynamically move replicates to other nodes in the environment.
This approach assumes that you are using application driven
security and not database security. Each replicated copy
of the service is using the same generic username/password
to connect to the database.
I am forwarding this answer to forte-users because others
might not completely understand this feature.
Eric
Eric Gold
Technical Director
Forte Australia
Voice: 61-2-9926-1403
Fax: 61-2-9926-1401
Eric Gold
Technical Director
Forte Australia
Voice: 61-2-9926-1403
Fax: 61-2-9926-1401

In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?

In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?

The query is re-issued as a flashback query and the client process can continue to fetch from the cursor. This is described in the Net Services Administrators Guide, the section on Transparent Application Failover.

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

The Ultimate Guide to Resolving Profile and Device Manager Issues

The following article also applies to issues after re-setting the severs' hostname. It also applies to situations where re-setting the Code Signing Certifictateas described by Apple has not resolved the issue.
Hello,
I have been plagued with Profile Manager and Device Manager issues since day one.
I would like to share my experience and to suggest a way how to resolve issues such as device cannot be enrolled or Code Signing Certificate not accepted.
I shall try to be as brief as possible, just giving an overview of the steps that resolved my issues. The individual steps have been described elsewhere in this forum. For users who have purchased commercial SSL certs the following may not apply.
In my view many of these issues are caused by missing or faulty certificates. So let us first touch on the very complex matter of certificates.
Certificates come in many flavours such as CA (Certificate Authority), Code Signing Certificate, S/MIME and Server Identification.
(Mountain?) Lion Server creates a so-called Intermediate CA certificate (IntermediateCA_hostname_1") and Server Identification Certificate ("hostname") when it installs first. This is critical for the operation of many server functionalities, including Open Direcory. These certs together with the private/public keys can be found in your Keychain. Profile and Device Manager may need a Code Signing Certificate.
The most straightforward way to resolve the Profile Manaher issues is in my view to reset the server created certicates.
The bad news is that this procedure involves quite a few steps and at least 2 hours of your precious time because it means creating a fresh Direcory Master.
I hope that I have not forgotten to mention an important step. Readers' comments and addenda are welcome.
I shall outline a sensible strategy:
1. Clone your dysfunctional server to an external harddrive (SuperDuper does a reliable job)
2. Start the server fom the clone and shut down ALL services.
3. It may be sensible to set up a root user access.
4. Back-up all user data such as addess book, calendar and other data that you *may* need to set up your server.
5. Open Workgroup Manager and export all user and workgroup accounts to the drive that you using to re-build your server (it may cause problems if you back-up to an external drive).
6. Just in case you may also want to back-up the Profile Manager database and erase user profiles:
In Terminal (this applies to Lion Server - paths may be diferent in Mountain Lion !)
Backup: sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
Erase database:
sudo /usr/share/devicemgr/backend/wipeDB.sh
7. Note your Directory (diradmin) password for later if you want to re-use it.
8. Open Open Server Admin and demote OD Master to Standalone Directory.
9. In Terminal delete the old Certificate Authority
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
This step is crucial because else re-building you OD Master will fail.
9. Go back to Server Admin and promote the Standalone Directory to OD Master. You may want to use the same hostname.
10. When the OD Master is ready click on Overview and check that the LDAP and Keberos Realm reflect your server's hostname.
11. Go back to Workgroup Manager and re-import users and groups.
NOTE: passwords are not being exported. I do not know how to salvage user passwords. (Maybe passwords can be recovered by re-mporting an OD archive - comments welcome! ).
12. Go to Server App and reset passwords and (not to forget) user homefolder locations, in particular if you want to login from a network account!
If the home directory has not been defined you cannot login from a network account.
13. You may now want to restore Profile Manager user profiles in Terminal. Issue the following commands:
sudo serveradmin stop devicemgr
sudo serveradmin start postgres
sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
sudo serveradmin start devicemgr
14. You can now switch back on your services, including Profile Manager.
In Profile Manager you may have to configure Device Management. This creates a correct Code Signng Certicate.
15. Check the certificate settings in Server App -> Hadware -> Settings-> SSL Certificates.
16. Check that Apple Push Notifications are set.(you easily check if they are working later)
17. You may want to re-boot OS Server from the clone now.
18. After re-boot open Server App and check that your server is running well.
19. Delete all profiles in System Preferences -> Profiles.
19. Login to Profile Manager. You should have all users and profiles back. In my experience devices have to be re-enrolled before profiles can be pushed and/or devices be enrolled. You may just as well delete the displayed devices now.
20. Grab one of your (portable) Macs that you want to enrol and go to (yourhostname)/mydevices and install the server's trust profile. The profile's name should read "Trust Profile for...) and underneath in green font "Verified".
21. Re-enrol that device. At this stage keep your finger's crossed and take a deep breath.
22. If the device has been successfully enrolled you may at last want to test if pushing profiles really works. Login to Profile Manager as admin, select the newly enrolled device. Check that Automatic Push is enabled (-> Profile -> General). Create a harmless management profile such as defining the dock's position on the target machine. (Do not forget to click SAVE at the end - this is easily missed here). If all is well Profile Manager will display an active task (sending) and the dock's position on the target will have changed in a few seconds if you are on a LAN (Note: If sending seems to take forever: check on the server machine and/or on your router that the proper ports are open and that incoming data is not intercepted by Little Snitch or similar software).
Note: if you intend to enrol an Apple iPhone you may first need to install the proper Apple Configuration software.
Now enjoy Profile and Device Manager !
Regards,
Twistan

HI
1. In Action profiles, logon to system and recheck correcion are available in action definition as well in condition configuration and the schedule condition is also maintained. but the display is not coming(i.e in the worklist this action is not getting displayed).
You can check the schedule condition for the action and match the status values...or try recreating the action with schedule condition again....for customer specific ....copy the standard aciton with ur zname and make a schedule condition and check the same.
2, In suppport team of incident when i give individual processor it throwing a warning that u r not the processor. but when i give org unit it is working perfectly. Could anyone guide on this.
You need to have the empolyee role for BP ..goto BP and got here dropdown for ur bp and choose role Employee and then enter ur userid
also make sure that u have the message processing role
Hope it clarifies ur doubt and resolve ur prob
Regards
Prakhar

Pavilion Dv7 4165dx Hard drive failure and performance issues?

I have a pavilion dv7 4165dx notebook that was working great until a couple of months when the performance of my machine started to decrease rapidly. I have performance issues with the machine because it takes 1 to 2 minutes to get from the welcome screen to the actual desktop and another 3 to 4 minutes for it to be ready to use. I already upgrade the memory from 4gb to 8gb but instead of going faster it goes slower and i also did a clean install of windows but it didn't help. Before i have problems it took maybe 30 to 50 seconds to go from the welcome screen to the actual desktop and 1 minute and 30 seconds to be ready to use and by the way i use soluto to tell me when the machine is ready for use.Then last week i notice that the headphone jack wasn't working properly so i contact hp and they told me to send them the laptop so i did, they replace the motherboard and they send it back to me and i just got it today it got a little better but it still lags on the welcome screen and to open programs. I check the memory using memtest 86 and the memory it's fine, but i check the hard drive with HDD Regenerator 2011 and it show i have one delayed sector. Then i check on hd tune pro and it show me some WARNING on section Calibration retry count( as you can see on the picture below) so my question is should i be worry and send it back to hp or what can i do to fix the problem i am having with this notebook?

I have the same laptop and have had issues with it since the day i brought it home. I have had it for a year now and am now replacing the hard drive for the 3rd time. My guess would be its your hard drive because most of the issues you seem to be having ar the same ones ive been dealing with for a while. I can say I'm very mad about the quality of this laptop and am in the process of battling with HP over this issue. If you have a chance go online and look at all the hard drive issues that this laptop has had and even look at the HP forums for this issue it will irritate you and make you wonder why this hasn't been fixed yet!

Lenovo ideapad yoga 13 pci data acqusition and signal processing center for problem for windows 8

Link to picture
hi everyone,
find original w8 cd and then i installed, when i was installing
i deleted all recovery and other partition, i did not think what can i do,
but then i activated windows and installed all driver, but i taking
after all drivers it stayed
2''unknown devices''
and when i rebooted, it says, usb device not recognized'' and also
''pci data acquisition and signal processing center'' devices problem for windows 8. and touchscreen not working.
i read related for w7 same problem, but what i will do now ?
thanks.
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

hi adilsefaersan,
Welcome to Lenovo Community Forums!
By opening your Device Manager right click on one unknown device and choose properties,
>On the properties windows Click on the Details Tab, on the property drop down Choose hadware IDs
> then copy the value and post back here whats on the Value pane
Do it for all those unknown Device and Post here the Value of the hardware ids
also can you share your Windows Version and bit type so we'll knwo the correct download page for you
Thanks and Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

IISRESET and Thread Process Issue

Similar Messages

Maybe you are looking for