Illegal characters in SOAP message

Hi
I consistently get the following in the server log (I'm using JAX-WS 2.1):
Couldn't create SOAP message due to exception: XML reader error: javax.xml.stream.XMLStreamException: ParseError at [row,col]:[1,1]
Message: Content is not allowed in prolog.
com.sun.xml.ws.protocol.soap.MessageCreationException: Couldn't create SOAP message due to exception: XML reader error: javax.xml.stream.XMLStreamException: ParseError at [row,col]:[1,1]
Message: Content is not allowed in prolog.
at com.sun.xml.ws.encoding.SOAPBindingCodec.decode(SOAPBindingCodec.java:292)
at com.sun.xml.ws.transport.http.HttpAdapter.decodePacket(HttpAdapter.java:276)
at com.sun.xml.ws.transport.http.HttpAdapter.access$500(HttpAdapter.java:93)
at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:432)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:244)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:135)
at com.sun.enterprise.webservice.JAXWSServlet.doPost(JAXWSServlet.java:176)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:738)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:411)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:317)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:198)
Caused by: com.sun.xml.ws.streaming.XMLStreamReaderException: XML reader error: javax.xml.stream.XMLStreamException: ParseError at [row,col]:[1,1]
Message: Content is not allowed in prolog.
at com.sun.xml.ws.streaming.XMLStreamReaderUtil.wrapException(XMLStreamReaderUtil.java:267)
at com.sun.xml.ws.streaming.XMLStreamReaderUtil.next(XMLStreamReaderUtil.java:95)
at com.sun.xml.ws.streaming.XMLStreamReaderUtil.nextContent(XMLStreamReaderUtil.java:110)
at com.sun.xml.ws.streaming.XMLStreamReaderUtil.nextElementContent(XMLStreamReaderUtil.java:100)
at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:174)
at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:296)
at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:128)
at com.sun.xml.ws.encoding.SOAPBindingCodec.decode(SOAPBindingCodec.java:287)
... 52 more
Is there any way to avoid having to parse illegal characters in the HTTP SOAP request? E.g. by stripping off BOM (byte order mark) characters prior to conversion to SOAP?
Help much appreciated,
Lance

Hi lance,
Hi
I consistently get the following in the server log (I'm using JAX-WS 2.1):
Couldn't create SOAP message due to exception: XML reader error: javax.xml.stream.XMLStreamException: ParseError at [row,col]:[1,1]
Message: Content is not allowed in prolog.
com.sun.xml.ws.protocol.soap.MessageCreationException: Couldn't create SOAP message due to exception: XML reader error: javax.xml.stream.XMLStreamException: ParseError at [row,col]:[1,1]
Message: Content is not allowed in prolog.
at com.sun.xml.ws.encoding.SOAPBindingCodec.decode(SOAPBindingCodec.java:292)
at com.sun.xml.ws.transport.http.HttpAdapter.decodePacket(HttpAdapter.java:276)
at com.sun.xml.ws.transport.http.HttpAdapter.access$500(HttpAdapter.java:93)
at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:432)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:244)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:135)
at com.sun.enterprise.webservice.JAXWSServlet.doPost(JAXWSServlet.java:176)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:738)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:411)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:317)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:198)
Caused by: com.sun.xml.ws.streaming.XMLStreamReaderException: XML reader error: javax.xml.stream.XMLStreamException: ParseError at [row,col]:[1,1]
Message: Content is not allowed in prolog.
at com.sun.xml.ws.streaming.XMLStreamReaderUtil.wrapException(XMLStreamReaderUtil.java:267)
at com.sun.xml.ws.streaming.XMLStreamReaderUtil.next(XMLStreamReaderUtil.java:95)
at com.sun.xml.ws.streaming.XMLStreamReaderUtil.nextContent(XMLStreamReaderUtil.java:110)
at com.sun.xml.ws.streaming.XMLStreamReaderUtil.nextElementContent(XMLStreamReaderUtil.java:100)
at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:174)
at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:296)
at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:128)
at com.sun.xml.ws.encoding.SOAPBindingCodec.decode(SOAPBindingCodec.java:287)
... 52 more
[Look here|http://forums.java.net/jive/message.jspa?messageID=194629]
seems trivial !!
the same msg comes up for various issues related to SOAP requests...
Is there any way to avoid having to parse illegal characters in the HTTP SOAP request? E.g. by stripping off BOM (byte order mark) characters prior to conversion to SOAP?
Not sure if there is ?
You have to ensure no illegal characters exists in the SOAP request (Rather than looking for a work around) ; )
Help much appreciated,
Lance

Similar Messages

External WebService call from CAF Core returns Invalid soap message

I am trying to perform the very simple action of calling a WebService from a CAF Core app service.
1. I imported the WS (Axis Web service running on NW 2004s SP9 server) with WSDL (option 2 on import external service page).
2. I then assembled the call in an app service method and invoke it.
3. I made sure to configure the end point for the service and the method using the External Service configuration.
When I execute the CAF core method using a simple Callable Object test client, I get the following error:
com.sap.caf.mp.base.exception.EngineException: Invalid soap message received
 at com.sap.caf.mp.core.data.service.manager.wsdl11.SOAPToMessageValueConverter.processComplexTypeMode(SOAPToMessageValueConverter.java:290)
 at com.sap.caf.mp.core.data.service.manager.wsdl11.SOAPToMessageValueConverter.generateComplexTypeValue(SOAPToMessageValueConverter.java:179)
 at
truncated.
I have also captured the XML request/reponse trace using tcpmon :
REQUEST:
POST /NWTestExpressWAR/services/TestExpressService HTTP/1.1
Host: 192.168.99.120:8078
Content-Type: text/xml; charset=UTF-8
Content-Length: 348
SOAPAction: http://www.testsys.com/TestExpressService/getAvailableModels
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:GetAvailableModels xmlns:ns1="http://www.testsys.com/TestExpressService"/></SOAP-ENV:Body></SOAP-ENV:Envelope>
RESPONSE:
HTTP/1.1 200 OK
Server: SAP J2EE Engine/7.00
Set-Cookie: saplb_*=(J2EE11743000)11743050; Version=1; Path=/
Content-Type: text/xml; charset=utf-8
Date: Mon, 04 Dec 2006 02:19:39 GMT
Transfer-Encoding: chunked
Set-Cookie: JSESSIONID=(J2EE11743000)ID1261187150DB11296929644926762709End; Version=1; Domain=192.168.99.120; Path=/
1f3
<?xml version="1.0" encoding="UTF-8"?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><soapenv:Body><GetAvailableModelsResponse xmlns="http://www.testsys.com/TestExpressService"><modelNames><name>Great Oak Manufacturing-January03 Test</name><name>PriceCheck-default</name></modelNames><errorMessagesReturn/></GetAvailableModelsResponse></soapenv:Body></soapenv:Envelope>
0
The only problem I can think off is that the transfer-encoding is marked as chunked which is causing the characters '1f3' and '0' to appear after and before the response and that this is causing the app to crash.
192.168.99.120 is the server the hosts the WS. It is also a 2004s SP9 server. The client server that hosts the CAF core service is of the same configuration. 8078 is the port I redirect for tcpmon purposes.
Could anyone shed some light on my problem?
Thanks,
Pratap.

It looks like NW WS client cannot handle Transfer-encoding of chunked even though this is part of HTTP 1.1. What seems to be happening is that the NW WS client is creating a HTTP 1.1 request. The service (axis ws running on NW) seeing this is creating a HTTP 1.1 response w/ chunked encoding. However, the client cannot handle this encoding and barfs. The solution is to change the service to return a HTTP/1.0 response since NW cant handle HTTP 1.1.
Pratap.

ApplicationResponseFault with namespace longer than 60 in sync soap message

Hi,
we are on pi 7.0 and our scenario is a async-sync bpm. In the sync soap message, the webservice raise an application error. In the response soap message we get the following detail tag:
<detail><ApplicationResponseFault xmlns="http://schemas.datacontract.org/2004/07/BizLayerNT.ServiceLayer.v10"><DocumentResponse xmlns="urn:oasis:names:specification:ubl:schema:xsd:CommonAggregateComponents-2"><Response><ResponseCode xmlns="urn:oasis:names:specification:ubl:schema:xsd:CommonBasicComponents-2">BusinessReject</ResponseCode></Response></DocumentResponse></ApplicationResponseFault></detail>
In sxi_monitor this application error isn't caught and a system error is generated.
In the system error message we get:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>java.lang.NullPointerException at java.util.Hashtable.put(Hashtable.java:393) at com.sap.aii.messaging.mo.MessageContext.setAttribute(MessageContext.java:140) at com.sap.aii.adapter.xi.ms.XIMessage.updateHeaders(XIMessage.java:4271) at com.sap.aii.adapter.xi.ms.XIMessage.getTransportHeaders(XIMessage.java:572) at com.sap.aii.af.ra.ms.impl.ServerConnectionImpl.request(ServerConnectionImpl.java:212) at
In defaulttrace.trc we get ","<sap:ApplicationFaultMessageNamespace> is longer than 60 characters: http://schemas.datacontract.org/2004/07/BizLayerNT.ServiceLayer.v10",":
"09/04/2009","10:22:43:421","unable to generate the header map","Error","","com.sap.aii.adapter.xi.ms.XIMessage.getHeaderMap()","sap.com/com.sap.aii.af.app","SAPEngine_Application_Thread[impl:3]_14","34103150:F:\usr\sap\TPI\DVEBMGS03\j2ee\cluster\server0\log\defaultTrace.trc","001A64317EEE005E00005F2300000A6C000472BC344957CC","com.sap.aii.adapter.xi.ms.XIMessage","","","n/a","b82f88e0992b11dea4d8001a64317eee","","0","0","","0","","","0","com.sap.aii.adapter.xi.ms.XIMessage","SAPEngine_Application_Thread[impl:3]_14","","J2EE_GUEST",
"09/04/2009","10:22:43:421","<sap:ApplicationFaultMessageNamespace> is longer than 60 characters: http://schemas.datacontract.org/2004/07/BizLayerNT.ServiceLayer.v10","Error","","com.sap.aii.messaging.mo.xmb.XMBErrorHeader.marshal(XMLWriter)","sap.com/com.sap.aii.af.app","SAPEngine_Application_Thread[impl:3]_14","34103150:F:\usr\sap\TPI\DVEBMGS03\j2ee\cluster\server0\log\defaultTrace.trc","001A64317EEE005E00005F2200000A6C000472BC34495771","com.sap.aii.messaging.mo.xmb.XMBErrorHeader","http://schemas.datacontract.org/2004/07/BizLayerNT.ServiceLayer.v10,","http://schemas.datacontract.org/2004/07/BizLayerNT.ServiceLayer.v10,","n/a","b82f88e0992b11dea4d8001a64317eee","","0","0","","1","","","0","com.sap.aii.messaging.mo.xmb.XMBErrorHeader","SAPEngine_Application_Thread[impl:3]_14","","J2EE_GUEST",
"09/04/2009","10:22:43:421","Could not process message from 192.168.130.21 due to java.lang.NullPointerException.","Error","","com.sap.aii.af.ra.ms.impl.core.transport.http.MessagingServlet.doPost(HttpServletRequest, HttpServletResponse)","sap.com/com.sap.aii.af.ms.app","SAPEngine_Application_Thread[impl:3]_55","34103150:F:\usr\sap\TPI\DVEBMGS03\j2ee\cluster\server0\log\defaultTrace.trc","001A64317EEE0083000072F700000A6C000472BC344955F3","com.sap.aii.af.ra.ms.impl.core.transport.http.MessagingServlet","192.168.130.21,java.lang.NullPointerException,","192.168.130.21,java.lang.NullPointerException,","SAPDES_TPI_34103150","1d72b100992c11dec67f001a64317eee","PIISUSER","0","0","","1","","","15337","com.sap.aii.af.ra.ms.impl.core.transport.http.MessagingServlet","SAPEngine_Application_Thread[impl:3]_55","","PIISUSER",
"09/04/2009","10:22:43:421","The SAP XI Adapter Framework Messaging Service caught an exception during rendering an XML Message. Details can be found in the trace file for Location com.sap.aii.messaging.mo.xmb. Action: Please contact SAP Support and provide the trace file.","Error","/Applications/ExchangeInfrastructure/AdapterFramework/SAPLibraries/SAPXDK","com.sap.aii.messaging.mo.xmb.XMBErrorHeader.marshal(XMLWriter)","sap.com/com.sap.aii.af.app","SAPEngine_Application_Thread[impl:3]_14","34103150:F:\usr\sap\TPI\DVEBMGS03\j2ee\cluster\server0\log\defaultTrace.trc","001A64317EEE005E00005F2000000A6C000472BC3449559F","com.sap.aii.messaging.mo.xmb.XMBErrorHeader","","","n/a","b82f88e0992b11dea4d8001a64317eee","","0","0","","0","/Applications/ExchangeInfrastructure/AdapterFramework/SAPLibraries/SAPXDK","","0","com.sap.aii.messaging.mo.xmb.XMBErrorHeader","SAPEngine_Application_Thread[impl:3]_14","","J2EE_GUEST",
So I think the problem is due to the namespace length. I'm right?
We can't change the consumed webservice to reduce namespace length and our customer ask us to solve it in PI. Is there any way to change the namespace before to be treated and get a correct application error?
Thanks in advance,
Marc
Edited by: Marc Mauri on Sep 5, 2009 12:06 PM

Hi Neetesh,
we developed our own adapter module. We use it in our receiver soap adapter, module tab, before and after the standard module sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean.
In this audit log secuence you can see that the problem seems not to be solved, because the error is triggered when processing response message inside adapter module sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean, so our module is not called and the problem remains.
2009-09-22 19:06:41 Success Message successfully received by messaging system. Profile: XI URL: http://sapdes:50300/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2009-09-22 19:06:41 Success The message status set to DLNG.
2009-09-22 19:06:41 Success Delivering to channel: CC_WS_DOS
2009-09-22 19:06:41 Success MP: Entering module processor
2009-09-22 19:06:41 Success MP: Processing local module *localejbs/AM_OWN_MODULE*
2009-09-22 19:06:41 Success GetHostName: Module called
2009-09-22 19:06:41 Warning Inside my own adapter Module <-- THIS IS A TRACE MESSAGE CODED INSIDE OUR MODULE
2009-09-22 19:06:41 Success MP: Processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
2009-09-22 19:06:41 Success SOAP: request message entering the adapter with user J2EE_GUEST
2009-09-22 19:06:41 Success SOAP: Web Services Security processing...
2009-09-22 19:06:41 Success SOAP: apply Web Services Security...
2009-09-22 19:06:41 Success SOAP: Web Services Security applied.
2009-09-22 19:06:42 Success SOAP: completed the processing
2009-09-22 19:06:42 Success SOAP: continuing to response message 4d2c88e0-a79a-11de-9ffa-001a64317eee
2009-09-22 19:06:42 Error SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault <----
THIS ERROR IS DUE TO NAMESPACE LENGHT (WE CAN SEE THIS ERROR IN DEFAULT_TRACE.LOG)
2009-09-22 19:06:42 Success MP: Processing local module localejbs/AM_OWN_MODULE
2009-09-22 19:06:42 Success MP: Leaving module processor
2009-09-22 19:06:43 Success The message was successfully delivered to the application using connection SOAP_http://sap.com/xi/XI/System. 2009-09-22 19:06:43 Success The message status set to DLVD.
Any suggestion?
Thanks in advance,

" " in soap message

Hi,
We receive a soap message with the characters "&lt" and "&gt". The soap adapter is unable to parse this as "<" and ">". Is there a way to translate "&lt" to "<" without creating an adapter module?
Thanks.

Hi Sunil,
The input payload is similar to the below
<Request xmlns="http://test.com" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<RequestResult><ACKNOWLEDGEMENT VALUE="no"><ERROR_CODE="test"/></ACKNOWLEDGEMENT></RequestResult>
</Request>
The string value is sent for the values in node, RequestResult.
The output has to be the exact same but instead of the "& lt ;" and "& gt ;" represented in the node, RequestResult, it needs to be translated to "<" and ">" xml nodes and not string values.
Thanks for your help.
Best Regards.

How to send SOAP Message with Oracle B2B

Hi everyone,
I need your help to send out from Oracle B2B a SOAP message with attachment of any type of file (image, pdf, etc.). Possibly using a SOA composite application or another way, it doesn't matter. I already create an ebMS partnership with a custom document protocol and I already create a working SOA composite application to send only text message to my trading partner. I have tried this solution: http://anuj-dwivedi.blogspot.it/2011/04/ebms-attachment-handling-in-oracle-b2b.html but it doesn't work for my case... It is to be noticed that I don't give any schema to my component in the SOA application explained firstly, and I select opaque as schema.
Thanks to all, regards
Nello

Hi Anuj and thanks for your help,
I need to send an ebXML message, with SOAP, and I try to send it with a .war application written in jsp connecting to http://10.85.28.24:8001/b2b/transportServlet to send the SOAP message. The errors reported is:
javax.xml.soap.SOAPException: Unable to receive message. Received a response from url: http://10.85.28.24:8001/b2b/transportServlet with HTTP status 200 and SOAP content-type: null.
the code I write is the following (to evaluate the two "null" in the super constructor)
<%!
public class EBMSSender extends SOAPRunner
private String cpaId;
private String service;
private String action;
private String mess;
private ArrayList<String> allegati=null;
public EBMSSender(String cpaId, String service, String action, String mess, ArrayList<String> file)
super("http://10.85.28.24:8001/b2b/transportServlet","null", "null");
this.cpaId = cpaId;
this.service = service;
this.action = action;
this.mess=mess;
this.allegati=file;
@Override
protected void prepareRequest(SOAPMessage soapMessage, SOAPBody soapBody) throws SOAPException
soapBody.addChildElement(SOAPUtility.createElement("CPAId", getNsPrefix(), getNsURI(),"agr3"));
soapBody.addChildElement(SOAPUtility.createElement("service", getNsPrefix(), getNsURI(),"OracleService"));
soapBody.addChildElement(SOAPUtility.createElement("action", getNsPrefix(), getNsURI(),"Oracletohermesb"));
soapBody.addChildElement(SOAPUtility.createElement("serviceType", getNsPrefix(), getNsURI(),"OracleServiceType"));
soapBody.addChildElement(SOAPUtility.createElement("convId", getNsPrefix(), getNsURI(), "convId"));
soapBody.addChildElement(SOAPUtility.createElement("fromPartyId", getNsPrefix(), getNsURI(), "Oracle"));
soapBody.addChildElement(SOAPUtility.createElement("fromPartyType", getNsPrefix(), getNsURI(), "Name"));
soapBody.addChildElement(SOAPUtility.createElement("toPartyId", getNsPrefix(), getNsURI(), "Hermes-b"));
soapBody.addChildElement(SOAPUtility.createElement("toPartyType", getNsPrefix(), getNsURI(), "Name"));
attach(soapMessage);
protected void attach(SOAPMessage soapMessage)
String h=mess;
DataHandler dh;
AttachmentPart ap = soapMessage.createAttachmentPart(h,"text/plain");
soapMessage.addAttachmentPart(ap);
if(allegati!=null)
for(int i=0; i<allegati.size();i++)
dh=new DataHandler(new FileDataSource(new File(allegati.get(i))));
ap=soapMessage.createAttachmentPart(dh);
ap.setContentType(new MimetypesFileTypeMap().getContentType(allegati.get(i)));
ap.setContentLocation(allegati.get(i));
soapMessage.addAttachmentPart(ap);
@Override
protected void processFault(SOAPFault soapFault) throws SOAPException{}
@Override
protected Object processResponse(SOAPMessage responseMessage,SOAPBody responseBody) throws SOAPException
SOAPElement messageId = SOAPUtility.getChild(responseBody, "message_id", getNsURI());
return null;
%>
The code works fine on the other trading partner side to send ebXML message to Oracle B2B. Apart from this solution (however,it would be my favorite), I find your blog and I try to implement your solution. It works: it sends files with only text payload to the other trading partner without any problem, but if I try to send for example an image in byte array written in a file .txt, the ebxml file received has the byte array with wrong characters. it may be that I have not provided the xsd schema? in case if I wanted to send an ebXML message with text and attachments, what xsd schema do I need to provide?
or is there another way to implement a SOA composite application to send SOAP messages with attachments?
Thank for your help!, regards
Nello

Illegal Characters Newly found in RH8 Project

Hello,
I need some help. I opened my RH7 project in RH8 for the first time, and received error messages complaining of file names having illegal characters and I am unable to import ANYTHING (Master pages, images, HTML files, etc.) because the items have illegal characters.
Let me say that I've never had problems like this using RH7, in fact, I believe I initially created the project using RH6. In any case, I read a similar thread on this forum and decided that perhaps my Project Title and Project Name are invalid, since they both have apostrophes ("XX YY User's Guide"). So, I renamed them (using RH8, of course) to "XX YY User Guide" and now, things are VERY SCREWED UP. I've attached the dialog box that I now receive, it's cycling through every single topic in my project (~50 topics), and I'm getting tired of clicking OK.
Is there any quick fix for this problem, or do I need to just start anew?
Using: RH8, Windows XP.
Images/Topics/Master Pages: Names have underscores, but I believe those are legal; never had an issue before migrating to RH8. No spaces or other illegal characters.
Thank you...any help would be appreciated. I've never come across this problem before, even with the apostrophes in the Project Title/Name.

Hi there
In addition to what my esteemed colleague Peter offered, I'll add this.
The image shows that you have an apostrophe present. Perhaps try renaming things so the apostrophe isn't present?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

[OSB] SOAP Message Body Deleted in Routing Process

Hello Folks,
I'm using Oracle Services Bus 11g and I have the following scenario:
A Business Services that is a client of a WebService. This WebService has an operation that return in its Soap Message a field with special characters (an encripted password).
So, I've created an Proxy Service that route the request message to above business service, but when the message returned by Business service is routing back to Proxy Service the body of the message is deleted.
Checking out the trace of the call, it says "Body was deleted" ! And so the message is returned by Proxy service without body !
I suspected that problem is something about encoding !
Someone could help me resolve this problem ?
Thanks in advanced!

Hi,
I am facing some similar issues with OSB 10gR3 where the Message body gets deleted and i get empty soap body as response when i make continuous calls to a business service without any time delay between the calls.
Though surprisingly i get the correct response from the business service for the first time but only on consecutive calls without any time delay between two calls i get empty soap body. Later if i try to call the business service leaving a gap of 15 sec after my first call, i get the correct response.
I initially thought it might be a problem with the business service itself but when i try to make continuous calls to the Business service without any timedelay directly from SOAPUI , I am getting correct response everytime.
Hence this seems to be a problem only when i invoke the business service via the OSB proxy and thsi deletes the response body wehn i make continuous calls.Not sure whether this is a bug with OSB or encoding issues.
Pls help me to know if this has anything to do with the caching or any setting in OSB server.
Thank you
Preetha
Edited by: 893969 on 31-Oct-2011 06:25
Edited by: 893969 on 31-Oct-2011 06:27

Writting attached file from SOAP message to a FTP folder

Hi everybody,
Our scenario is an interface which receives a SOAP message with a file attached. As we don't need to do any mapping into the attachment, we are supposed to deliver that file as it is into a FTP folder.
Our problem is that we cannot find how to configure File comm channel to write the attached file and no the SOAP XML message which is what we are getting now. Any help on this?
Thanks in advance.

Hi
check these forum posts
SOAP with attachments
Mail Sender Adapter - Attachment Handling
Regards
Vishnu

Unable to open PWA in browser and MSP on application server in project server 2007. ERROR: Sending the Soap message failed or no recognizable response was received.

Hi All,
I am using project server 2007 and WSS 3.0.
I have been facing a strange issue for couple of days. I am unable to open PWA in browser and MS Project Pro on application server.
Everything is correct whether it is URL or MS Project profile account on MSP. This is strange because i can open same PWA/MSP from other computers (Database server / Client PCs) but not locally on server.
When i try to connect to MSP on App server, i get the following errors in event viewer.
Event Type: Error
Event Source: MSSOAP
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Connection time out..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: An unanticipated error occurred during the processing of this request..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description: Soap error: Sending the Soap message failed or no recognizable response was received.
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Unspecified client error..
One more issue i am facing and i guess that is related to above issue. The Issue is, when i am creating a new project, It's workspace gets created but doesn't get linked to the project and i can't link it manually because it already exists for the project.
sandeep

Hi Paul ,
Thanks for reply. The project server URL was already added to the Trusted
Sites/Local Intranet areas in IE.
sandeep

How to get full SOAP message in WebService

hi,
Is it possible to get SOAP message while Request operation during transaction in WebService.
I tried with Handler, while retreiving message it is having a MessageContext. How to initilize that like example
public boolean handleRequest(MessageContext mc) {
          SOAPMessageContext messageContext = (SOAPMessageContext) mc;
          System.out.println("** Request: "+ messageContext.getMessage().toString());
          return true;
     }while i make a class called SoapHdlr i have implemented all methods including the above.
In that from my class if i want to call the above method i need to pass MessageContext how to give that MessageContext or any other ways to get SOAPMessage fully.
plz can any one guide me there
ThanKQ

I think, there are some concepts missunderstood. First if you use JAX-WS- Metro framework, this kind of handlers will work. Also you should identify your SOAPHandler for your web service. For ex: in Netbeans 6, you can right click on service and select configure handlers. Then you decide your handler.
Then automatically, Metro framework directs SOAPMessages to your SOAPHandler to handle full SOAPs. HandleMessage() method will work.
If you have problem again, just ask.

Trying to parse a Soap Message

I'm working on creating webservices that will be consumed by
Director and working with the client programmer, we've come to
recognize the problem, but we don't know how to resolve it.
Problem: the XMLParser doesn't follow href parameters in tags
that refer to subobjects, which result in a #getProp Ref error.
I have a web service method that will return a list of names
and it returns the following XML response:
<?xml version="1.0"
encoding="UTF-8" ?>
<soapenv:Envelope xmlns:soapenv="
http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="
http://www.w3.org/2001/XMLSchema"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<getStudentsResponse soapenv:encodingStyle="
http://schemas.xmlsoap.org/soap/encoding/">
<getStudentsReturn href="#id0"
/>
</getStudentsResponse>
<multiRef id="id0"
soapenc:root="0" soapenv:encodingStyle="
http://schemas.xmlsoap.org/soap/encoding/"
soapenc:arrayType="xsd:anyType[6]"
xsi:type="soapenc:Array" xmlns:soapenc="
http://schemas.xmlsoap.org/soap/encoding/">
<multiRef
xsi:type="soapenc:string">Bob B
Bobbly</multiRef>
<multiRef
xsi:type="soapenc:string">Andy A
Anderson</multiRef>
<multiRef
xsi:type="soapenc:string">Carl C
Carlson</multiRef>
</multiRef>
</soapenv:Body>
</soapenv:Envelope>
When it hits the getStudentsReturn element and tries to refer
to a child node, and obviously fails.
The server is Tomcat 5.5, using Axis 1.4 for web services. I
can post a wsdl if desired.
The web service is configured for rpc/encoded style.
What is the way to get out of this particular jam? Neither me
nor the client programmer have extensive knowledge of how Director
(or the relevant Xtra) handles SOAP messages or parse them. I've
stepped through the code and seen the XML parser object render the
response into an object tree, but it doesn't respect the href's.
I can provide follow up to any questions or comments about
this problem.
Regards,
Jeff Vandenberg

Hi Jeff,
While I don't have much experience with web services, I'm
about to
embark on something that involves extensive use of them, so
your post
caught my eye.
If I understand correctly, the href attribute associated with
the
getStudentsReturn node is supposed to "automatically" link to
the
following multiRef array. Is that correct?
Assuming it *did* link correctly, how would this manifest
itself? Is it
not a matter of you the parser watching for href tags and
resolving them
yourself? Why would you not simply provide the multiRef nodes
as
children of the getStudentsReturn node? Is there
documentation somewhere
for the href attribute and this form of linking?
Have you tried using the Flash Asset xtra for parsing, and
does it
behave "correctly"?

How To : Call External Webservice from BPEL and pass SOAP Message to the WS

Hello All-
Greetings to all BPEL gurus. I am currently facing difficulties in calling an External Webservice from my BPEL Process and passing SOAP Message to it. The details are below:
1. The BPEL process, using database polling feature of DB Adapter, will get the records from the database.
2. Transform the message
3. Call the External Webservice and pass the transformed message as the input to it. However the Webservice expects the BPEL process to send SOAP headers in the input message.
I am struggling on how to put the transformed message within a SOAP envelope in the BPEL process.
If anyone had similar requirements and have successfully been able to send SOAP messages from BPEL process to an external webservice, kindly let me know.
Also if there is some kind of documentation or any link in the forum that I can refer, please let me know that as well.
I am new to Webservice integration using BPEL and would really appreciate your help.
Thanks In Advance
Regards,
Dibya

Hi Dharmendra,
I am trying to send a SOAP message from my BPEL process to a web service. I have a complete SOAP message in a complex variable defined in the wsdl for the partnerlink (web service). My problem is that when I invoke the partnerlink it fails even though the content shown in the BPEL console looks valid.
I have set up obtunnel to see what I am actually sending out from BPEL. You mention that BPEL creates the SOAP envelope automatically.
I think that my problem is a result of this automatic SOAP envelope that BPEL is creating. Do you know if there is a way to turn it off?
This is what I see in the TCP monitor, please note the double SOAP env:Body:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <env:Body> <RCMR_IN000002NR01 xmlns="urn:hl7-org:v3" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsa="http://www.w3.org/2005/08/addressing" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<env:Header>
<wsa:To xmlns:wsa="http://www.w3.org/2005/08/addressing">http://testhost/CCS/Service_Endpoint</wsa:To>
<wsa:From xmlns:wsa="http://www.w3.org/2005/08/addressing">
<wsa:Address>http://localhost/CCS/Service_Endpoint</wsa:Address>
<wsa:Metadata>
<device xmlns:hl7="urn:hl7-org:v3">
</device>
</wsa:Metadata>
</env:Header>
<env:Body>
<RCMR_IN000002NR01>
</RCMR_IN000002NR01>
</env:Body>
</RCMR_IN000002NR01>
</env:Body>
</env:Envelope>
Any help is appreciated.
Regards,
Aagaard
Edited by: Aagaard on Oct 30, 2008 8:59 PM
Should have mentioned. I am using BPEL 10.1.3.4
Edited by: Aagaard on Oct 31, 2008 8:43 AM
I have opened a new thread for this question so as to not confuse the issue more than necessary.
How many SOAP envelopes do you really need?

How to Call web service operation by creating plain SOAP message in client?

Hi
Thank you for reading my post.
I have some questions about using web methods of a web service which i would be very gratfull if you could answer.
I should implement a web service that should receive a file with some other parameters from client and another web service which should receive some parameters and return a file.
I used a mechanism like the following one to handle the condition and it just works. But I have a problem, I need to create dynamic invocation and I must create soap message and send it to webservice (no IDE generated code)
What i need is one or two tips or a sample that shows how we can send and receive files by web services.
I want to know how we can create the SOAP message ourself and then send it to the web service endpoint and it call the web method and ....
Imagine the following web method, How i can invoke it by creating soap message myself and sending it to end point.
@WebMethod
public String saveFile(@WebParam(name = "fileName") String fileName, @WebParam(name = "fileContent") byte[] fileContent) {
// TODO implement operation
return "Something";
Another question is :
Does this mechanism that i used to transfer files is OK?
Is it optimized or there are some other ways to do this job.
I should say that i put one week on handlers to use soap attachments and i get no result.
So, Please let me know if you know or have some sample that show me how to do the above job.
Thanks.

Hi
From NW04s SP8 you can create webservice systems from within VC , and you will have the option of adding a user and password to authenticate. You can find it at Tools>>Define web service system. You will see a check box url requires user and password.
If for some reason you can not do it in VC then you should create the system in the portal and fill out the usermapping screens.
Jarrod Williams

Error while posting SOAP message

I am trying to post a SOAP message but I keep getting this error. Can anybody help me on this. I tried using ALTOVA spy and SOAP Ui but the result is the same error.
 <SOAP:Body>
 <SOAP:Fault>
 <faultcode>SOAP:Server</faultcode>
 <faultstring>Server Error</faultstring>
 <detail>
 <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
 <context>XIAdapter</context>
 <code>ADAPTER.JAVA_EXCEPTION</code>
 <text><![CDATA[
com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve binding for the given channelId: Binding:CID=null;
* at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBindingByChannelId*(AbstractLookupManager.java:173)
 at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:431)
Scenario is SOAP Sender and IDOC reciever.

I tried reconfiguring also.
When I test from Integration Engine in RWB using the test message it is sucsseful. Infact I can see the IDOC too.
But when the basis guy tested with Adapter engine in RWB using the test tool, it gives the following error:
Error While Sending Message: Additional error text from response: com.sap.engine.interfaces.messaging.api.exception.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=BusComp_Siebel1;TS=;AN=SI_Sales_Order_OB_Async;ANS=http://trm.com:o2b:SalesOrderCreate; in the current context [Unknown].
Any idea where is the problem.
When we tried the WSN step we are facing this error in the very first step.
WSDL1.1, WSDL 2.0 definition element expected. Found [html: null] .
Edited by: Chandra Gunapati on Oct 7, 2009 10:00 PM

Adding PDF file as attachment to SOAP message

Hi,
I want to add a pdf file from the hard disk to a soap message as attachment. I have the following code:
// CREATE MESSAGE
SOAPMessage msg= fac.createMessage();
SOAPEnvelope nEnv= msg.getSOAPPart().getEnvelope();
//READ FILE FROM THE HD
String pdfFileName = "somepdffile.pdf";
FileReader fr = new FileReader(pdfFileName);
BufferedReader buffr = new BufferedReader(fr);
String sPdf="";
String line = testB.readLine();
while(line!=null)
sPdf += line;
line = testB.readLine();
//WRITE THE FILE TO BYTE ARRAY AND THEN TO STREAM
byte[] pdfData = sPdf.getBytes();
ByteArrayInputStream stream = new ByteArrayInputStream(pdfData);
//CREATE ATTACHMENT ADD THE STREAM AS CONTENT
AttachmentPart attPDF = msg.createAttachmentPart();
attPDF.setContent(stream, "application/pdf");
msg.addAttachmentPart(attPDF);
return msg;
I GET THE NEXT EXCEPTION:
javax.activation.UnsupportedDataTypeException: no object DCH for MIME type application/pdf
at javax.activation.ObjectDataContentHandler.writeTo(DataHandler.java:851)
at javax.activation.DataHandler.writeTo(DataHandler.java:305)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1089)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:635)
at javax.mail.internet.MimeMultipart.writeTo(MimeMultipart.java:233)
at com.sun.xml.messaging.soap.MessageImpl.saveChanges(MessageImpl.java:356)
at javax.xml.messaging.JAXMServlet.doPost(JAXMServlet.java:192)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2343)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:468)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1012)
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1107)
at java.lang.Thread.run(Thread.java:536)
javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.messaging.JAXMException: Bad response: (500, Internal Server Error)
at com.sun.xml.messaging.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:93)
at mp.soap.SendingServlet.getPolisPrint(SendingServlet.java:320)
at mp.soap.SendingServlet.doPost(SendingServlet.java:234)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2343)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:468)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1012)
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1107)
at java.lang.Thread.run(Thread.java:536)
CAN ANYONE TELL ME WHAT THE SOLUTION IS ?
PLEASE HELP ME !!!
Birol

testB == buffr ! Sorry.
IT IS STILL NOT WORKING !!!!!
// CREATE MESSAGE
SOAPMessage msg= fac.createMessage();
SOAPEnvelope nEnv= msg.getSOAPPart().getEnvelope();
//READ FILE FROM THE HD
String pdfFileName = "somepdffile.pdf";
FileReader fr = new FileReader(pdfFileName);
BufferedReader buffr = new BufferedReader(fr);
String sPdf="";
String line = buffr.readLine();
while(line!=null)
sPdf += line;
line = buffr.readLine();
//WRITE THE FILE TO BYTE ARRAY AND THEN TO STREAM
byte[] pdfData = sPdf.getBytes();
ByteArrayInputStream stream = new ByteArrayInputStream(pdfData);
//CREATE ATTACHMENT ADD THE STREAM AS CONTENT
AttachmentPart attPDF = msg.createAttachmentPart();
attPDF.setContent(stream, "application/pdf");
msg.addAttachmentPart(attPDF);
return msg;

Illegal characters in SOAP message

Similar Messages

Maybe you are looking for