IMA11: avoiding that an user can reject the appropriation request "created"

Hi All,
with reference to the t.code IMA11 (create/change an appropriation request),
an appriopriation request has the systen status "created".
I wonder if is possible to avoid that, for the appropriation request which has the status "created",
a certain user can choose the botton 'reject' in the tab "control data".
In PFCG, for the authorization object A_IMA_BUK I can't exclude that activity.
Coul anyone help me?
Thanks

Use Substitution for passing it from level 1 to below WBS:
Prerequisite:
PROJ-PROFL = 'ABC' AND PRPS-STUFE >= '1'
Substitute
PRPS-ASTNR = " A"
PRPS-VERNR = "B"
This will help for Person Responsible and Application Number.
However for Partner function you have to use Exit and wirte code.
Thanks
Sarang

Similar Messages

  • Unauthorized User can see the aggregated result?

    Dear all,
    I got a problem that, unauthorized user can see the aggregated result.
    e.g. A user who is allowed to read data of Sales Office (0SALES_OFF) 0001 only. (It is done in the RSECADMIN already)
    Now a cube contains Sales records of Sales office 0001 & 0002 :
    Sales Office 0001  Sales Value 3000
    Sales Office 0002  Sales Value 2000
    When the user execute a query from the cube without any selection criteria, it give the aggregated Sales Value 5000.
    But if the user try to drill down for each sales office, it can then give error, because the user are not suppose to see Sales Office 0002 records.
    What I expect is an error at the very beginning when the user execute the query, saying the cube contains data that the user is not suppose to see, the user need to put in the correct Sales Office as criteria first.
    Is there anyone can help on this issue?? I have no idea how can this happened?
    Many Thanks!!!
    Chris

    Hi,
    Now I understood your concern correctly. Unfortunately, I do not have prompt answer for you. So, User should be able to view the aggregated result, but not to irrelevant sales office. If you don't have condition on Aggregated Result, restricting to individual Sales Office can be done in RSECADMIN.
    Let's wait for other's opinions.......
    Regards,
    Suman

  • How to set the maximum length that a user can enter in Msgstyledtextinput

    Hi Everyone,
    I'm currently using EBS 11.5.1 and 10.2g DB
    Is there a way that I can set the maximum length that a user can input?
    I changed the Maximum Length to lower number (from 150 to 100) but I get the following error.
    Developer Mode Exception encountered in item SaveLocation
    Error: The item SaveLocation has a maximum length (100)
             which is not equal to that of the corresponding VO attribute
           , SaveLocation length (150).
    Action: Make sure they are equal in size. There must be other way to set that value
    Thanks,
    Elmer

    You have to set the maximum length of column to 150 to avoid this error.
    You can set the same in Jdev.
    Thanks
    --Anil                                                                                                                                                                                                                                                       

  • How to limit the max dialog no that one user can use at the same time?

    Hi,
    I meet one performance problem that one user can open 6 sessions in the GUI and he/she can run 6 reports at the same time witch could occupy 6 dialogs in the sap R/3 instance. It makes poor performance for other users.
    Would you pls tell me how to limit the no. of sessions one user can create at the same time or how to limit the no. of dialogs one user can occupy at the same time?
    Thanks a lot!
    I used this parameters in the default profile as blew:
    rdisp/rfc_check 1
    rdisp/rfc_use_quotas 1
    rdisp/rfc_max_own_used_wp 20 (means: 20%)
    It still didn't work.
    Sean

    Hello,
    We can reserve DIA W.P by giving value to the parameter :- rdisp/rfc_min_wait_dia_wp=1(default)
    that have to necessarily remain free for other users.
    This parameter is used to reserve a number of dialog work processes for Dailog mode.
    For eg. If 10 dialog w.p. are configured for the instance(rdsip/wp_no_dia=10) and the parameter rdisp/rfc_min_wait_dia_wp=3 is set,parallel RFC's can occupy a maximum of 7 DIA W.P.3 DAI W.P. always remain free for dialog mode.
    But now the question is how we assign/restrict this free dialog w.p. to the specific user.
    Reply...
    Regards,
    JUNAID

  • In javascript, how do I open a dialog so that the user can input the value of a variable?

    I'm working on a script that will be used for many images, all of them using the same format (size of the image, layer layout, etc).
    All of these images will have a layer of text, and what I want is to have the script modify the horizontal length of the text layer (horizontal percentage scale), shrinking it so that all of the text appears on-screen, in case there's too much of it.
    But the text will vary from image to image, and what I want is for the script to display a dialog box were the user can input the text that will be put on the text layer and scaled down.
    Can this be done?

    If you want the user to both enter then fit the text while your script is running, here is one way to do that.
    var typeLayer = activeDocument.activeLayer;
    var type = typeLayer.textItem;
    var t = prompt ("Enter text" , "new text");
    type.contents= t;
    transformLayer();
    function transformLayer() {
         try{
         var desc = new ActionDescriptor();
            var ref = new ActionReference();
            ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
        desc.putReference( charIDToTypeID('null'), ref );
        desc.putEnumerated( charIDToTypeID('FTcs'), charIDToTypeID('QCSt'), charIDToTypeID('Qcsa') );
            var desc1 = new ActionDescriptor();
            desc1.putUnitDouble( charIDToTypeID('Hrzn'), charIDToTypeID('#Rlt'), 0.000000 );
            desc1.putUnitDouble( charIDToTypeID('Vrtc'), charIDToTypeID('#Rlt'), 0.000000 );
        desc.putObject( charIDToTypeID('Ofst'), charIDToTypeID('Ofst'), desc1 );
        desc.putUnitDouble( charIDToTypeID('Wdth'), charIDToTypeID('#Prc'), 100 );
        desc.putUnitDouble( charIDToTypeID('Hght'), charIDToTypeID('#Prc'), 100 );
        desc.putBoolean( charIDToTypeID('Lnkd'), true );
        executeAction( charIDToTypeID('Trnf'), desc, DialogModes.ALL );
         }catch(e){}

  • Limit the amount of tasks that a user can claim

    I have a custom worklist and I need to develop a requirement for not allowing the users to claim more than one task at a time. Does the Worklist API have something to limit the amount of tasks that a user can claim at a time?.
    Thanks in advance.
    Neuquino

    Apparently the Family Base add-on (https://my.verizonwireless.com/vzw/nos/safeguards/SafeguardProductDetails.action?productName=familybase) from Verizon will allow you to set limits on how much data a particular device can consume.  I think it is free for the first 3 months (not sure) after that it will cost $5 per month.  I have heard rumors though that it does not work well with iPhones???

  • What are the command line options to start firefox to start in a kiosk mode which restricts the options that a user can select

    I would like to use Firefox as my browser but want to restrict the configuration options that a user can do. Is there a command line option to start in a kiosk more in which no toolbars are visible including min/maximise buttons so that only the rendered webpage is visible? I am interested for both Windows and Linux environments.

    There is a /wait option for the Windows "start" command to wait for the program to get finished.
    *http://technet.microsoft.com/en-us/library/bb491005.aspx
    <pre><nowiki>/wait : Starts an application and waits for it to end. </nowiki></pre>

  • Any user can block the system

    We have a Sunfire 6800 and Solaris 8.
    I found out that any user can use up all available semaphores and shared segments, system wide.
    Then system enters to unstable situation, which many important processes fail.
    To resolve this situation, one can use ipcs command and take back reserved memories and semaphores from that "user"...
    But this is after something happens.
    To avoid something happens, do you know a method or a tool in Solaris 8 or 9 to restrict usage of semaphores and shared segments for each user or group of users?

    Hi, thanks for your answers and advices.
    But:
    In those documents I am not able to find the answer of my question.
    I am a Unix guy but not Solaris specialist yet. With those parameters,
    I could only see the possibility of increasing or decreasing system wide
    availability of semap's and shm's. But this won't stop any user
    to use up all.
    I found this vulnerability in the acceptance tests of our new Sunfire platform.
    Sun engineer wasn't interested in and told me that I can disable
    any Unix server like this (I don't know I haven't tried it in another).
    But I found that denial of services in Solaris machine (8 cpu, 8 gb)
    was extremely easy.
    What I think is, there should be something to limit semaps and shm's per user, not per process or system wide. I could not believe the otherwise.

  • How we can lock No more than one user can use the table  at a single time

    Hi Abapers,
    0)  which  function modules to lock & unlock a table.
    1) When you execute the program, we can check if there is any lock on this table. If yes, the user should be able to only view the table contents and not modify.
    2) If there is no lock, then lock the table and go into change mode.
    3) On exiting from the program, unlock the table using the function module.
    4) more than one user can't modify the table just display.
    Note: If there is any lock, display message saying table is locked.
    Plz help me for this requirement.
    Thanks
    Nani

    Hello Nani
    Have a look at the lock object EMMARAE (<i>Lock MARA and MARM/MAKT exclusively</i>) in transaction SE11.
    Inspect the F1 help for field <b>Lock mode</b>:
    DE ENQMODE
    Short Text
         Lock mode
    Definition
         Defines how to synchronize table record access by several users.
    The following modes exist:
         Exclusive lock
             The locked data can be read or processed by one user only. A request
             for another exclusive lock or for a shared lock is rejected.
         Shared lock
             Several users can read the same data at the same time, but as soon
             as a user edits the data, a second user can no longer access this
             data. Requests for further shared locks are accepted, even if they
             are issued by different users, but exclusive locks are rejected.
         Exclusive but not cumulative lock
             Exclusive locks can be requested by the same transaction more than
             once and handled successively, but an exclusive but not cumulative
             lock can only be requested once by a given transaction. All other
             lock requests are rejected.
    If you want to lock a standard table search whether the table is used in lock objects (<i>Where-Used-List</i>). If it is a customer table you have to create your own lock object (including two function modules: one for enqueuing and the other for dequeuing).
    The lock modules can be found in menu <b>GoTo -> Lock Modules</b>.
    Given these lock modules the logic should be quite clear after starting the program:
    1. Request lock -> if successful, continue in Change mode; -> if failed, continue in Display mode
    2. Before leaving the report remove lock (note: no problem if no lock has been set in the beginning).
    Regards
      Uwe

  • How can I create a DVD image that PC users can retrieve and burn...

    I need to create a DVD disc image that PC users can retrieve from a private network share and burn to a blank DVD. Once burned, it needs to auto-start at the Menu. The master works fine. Images burned using the Mac Disk Utility work fine. But I have little control over who will download the image or the method by which they will burn it, so I need to provide visitors with guidance. Thank you in advance for any assistance you can provide.

    Thank Jeff for this one.....
    http://homepage.mac.com/geerlingguy/macsupport/mac_help/pages/0023-convert_dmg_imgiso.html
    I've also heard that you can just copy an ".img" iDVD image to a pc, change the extension to .iso and then burn with Nero, etc. But I haven't tried it myself.....
    John B.

  • Is there a way the user can change the equation in the formular node from the front panel on the fly, dynamically?

    Is there a way the user can change the equation in the formular node from the front panel on the fly, dynamically?

    Sorry, I don't think so. That would be pretty cool if you could create a property node for a formula node and then enter a formula on the front panel and use it to update the formula. But you can't create a property node for a formula node and the only way of modifying the formula is by typing it into the formula node on the diagram. And you can't modify a diagram of a running VI.
    You could create a VI which is only a formula node with the maximum number of inputs and outputs you expect. Have a button on the calling VI to Edit Formula. When the button is pressed, use a VI server to display the front panel on the formula VI, display a dialog box telling the user how to display the diagram of the formula VI, then stop the calling VI. (You can't edit a sub-VI while t
    he calling VI is running). The user will then need to rerun the calling VI to use the new formula.
    You might be able to do something by calling MatLab or something like that to get an interactive formula window.

  • Saving so that windows user can have access?

    I have my project all ready and those with quick time...loads up perfectly. However those who have windows have a long wait or pile will not come up. Do you know how i can save my final cut express project so that window users can have access to it?

    thank you. one last question....the quick time movie file can not be seen when opening on a windows. do you know if i need a quick time pro so that i can convert it? or is there a way that i don't know about?

  • How to disable airport so that standard users can't reenable it ?

    Even when I disable airport interface from the command line :
    sudo ifconfig en1 down (what requires sudo privileges)
    a standard user can reenable it ! Strange behaviour compared to linux or windows OS.
    If someone knows how to block airport, please let me know.
    Thanks

    Hello,
    Thank you for the answers.
    All users are standard users.
    The option I was searching for is in System Preferences - Network - AirPort - Advanced - Require admin password for : Disabling or enabling AirPort. The other two options could be useful too.
    I think I'll add this to my base image. In the meantime I'll try to apply the settings via Apple Remote
    I didn't find the exact settings to enable the 3 options from the command line, if you know how to do this please tell me.
    I found a few very useful commands though :
    Disable/Enable airport from the command line
    networksetup -setairportpower en1 off/on
    That's the command I will use when all machines will be configured with "Require admin password for : Disabling or enabling AirPort". If it's not configured the user can reenable airport.
    Disable/Enable airport service from the command line :
    networksetup -setnetworkserviceenabled AirPort off/on
    That's the command that can help when you haven't block the users yet. A standard user can reenable the service but he needs to know the command as well as how to use terminal.
    p.a

  • Check User Can Access the site collection Are Not?

    Hi All 
    I have some requirement to check user can access site are not through powershell?
    Recently we done migration from 2010 to 2013 SP after that i got some problem some users can not access site  but this user have permission in sp 2010 site .
    Regarding this i need to check specific user can loing or Access  the site collection are not. using powershell
    Some one said impersonate user we can check user can open the web are not but i don't know this impersonate.
    Please help me guys.... 

    Hi,
    You can check the permission for specific user with powershell. Here is the link. Hope this will help.

  • HT2589 We have purchase 5 apple minis and would like them all on one account.  That way we can monitor the use of these units.  they will be used strickly for a business application.  can I use one account in itunes or must i have multiple.

    We have purchased 5 apple minis and would like them all on one account, that way we can monitor the use of these units.  They will be used strickly for a business application.  Can I use one account in itunes or must i have multiple.

    Not going to happen the way you want it to.
    When you add a gift card balance to the Apple ID, it's available for the Apple ID.
    Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

Maybe you are looking for