IMac freezes, screen flickers, simply power fails or restarts when visiting Javascript "heavy" pages in safari

For the last couple of updates in Mavericks I'm having an issue on my 24" iMac (early-2009).
Whenever Safari wants, it makes the screen show some graphical glitches and everything but the mouse are inoperable and that only to the extend of moving the cursor, because clicking doesn't do anything. Some other times the machine just crashes, on some few occasions it has even told me there was an error and has send an error report at apple.
I tried disabling all 4 of my safari plug-ins and reseting everything in Safari, but nothing changed.
Then I started playing around with detecting what might be causing this, so I have come to the conclusion of it being a JavaScript (or JQuery?) issue.
Since I'm a programmer and a web-designer, I tested it on a few webpages created by me and I soon noticed that if I try to stretch out the usage of let's say a slider by clicking fast on the "next slide" it caused the issue.
After that I checked and saw that indeed the more JavaScript calls a page has the more the chances of Safari "crashing" (I'm using quotes, because not once has simply safari crashed, that would be an improvement in my case!).
All other major Browsers (Chrome, Firefox and Opera) don't seem to cause this issue, neither has this happened on any other occasion but when I'm working on Safari.
Any ideas on what might be causing this and/or how to fix this?

Check these links for suggestions:
http://guides.macrumors.com/Testing_RA
Using Apple Hardware Test
BTW, do you have any third party RAM installed? If yes, try removing and check for issue.

Similar Messages

New iMac 27inch screen flickering/tearing/shutoff (continued)

This thread is a continuation of [New iMac 27inch screen flickering/tearing/shutoff|http://discussions.apple.com/thread.jspa?threadID=22 12682]. The thread was becoming too long and was causing some browsers to time out. The older thread has been locked.

citrus101 wrote:
Hi Brett L,
thank you for the coordination of this helpful thread. Are you Apple? If yes, please allow me to ask you three questions:
1) The Display Firmware stopped for over 90% the flicker issue, but what has this Firmware changed exactly?
2) Is Apple preparing a fix for the yellow tinge?
3) When will it be save to buy a new iMac?
Thank you for your efforts.
Hello Citrus.
Excellent questions.
I hope that Apple will authorize Brett L. to provide us with some clear, honest answers to them . . . although, as I pointed out before, it would seem by the latest messages that have been posted in this thread -- that is, the *original thread* -- that through their actions, Apple has already provided us with their answer -- and solution -- to the yellow tinge issue; and that is the replacement of the LCD panel.
As to what the most recent display firmware update did, I am doubtful that Apple will allow Brett to reveal that kind of information, but we can be hopeful.
As far as when it will be safe to purchase a new iMac, I seriously doubt that Apple will say anything which would suggest that it is not safe to purchase a new iMac now. What company is going to say "Don't buy our product now. It's not safe"?
For my part, I have now contacted Apple regarding the issues that I am having with my 27" iMac, and I will wait over the next few days to see how things play out. Based on the testimonies of others here, I don't expect Apple to disappoint. I have the confidence that they want to leave me a satisfied customer who will continue to purchase their products in the future.
Message was edited by: Warren Beasley

My MBP Screen goes gray and asks for restart when trying to open Adobe raw

My MBP Screen goes gray and asks for restart when trying to open Adobe raw files. Even when I try to populate raw images in the brige the scree wipes gray and says I have to restart. I am using CS2 and the latest version 3.7 of Adobe camera raw. I can however open raw images in preview. Please help! OS ver. 10.4.9 2.16ghz intel duo core processor.

Welcome to Apple Discussions!
What you are getting is a kernel panic, caused by one of the issues my FAQ* discusses:
http://www.macmaps.com/kernelpanic.html
* Links to my pages may give me compensation.

HT201401 use a iphone4S and I will say that since I installed IOS6, I block 2-3 seconds the screen, when you open a page in Safari, I salt directly into the sprinboard, and going harder, moving hard, last version I had no problem ...I hope to get a new ve

I use a iphone4S and I will say that since I installed IOS6, I block 2-3 seconds the screen, when you open a page in Safari, I salt directly into the sprinboard, and going harder, moving hard, last version I had no problem ...I hope to get a new version IOS6.
had anyone this problems?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

24" iMac Silver - screen flickers

Just pulled it out of the box today. I can't operate at anything less than full brightness or the screen flickers. I can't find any other posts on this one. I see a lot of other related issues. Anyone having this issue? Did it go away?
I can't lose this machine to apple for repairs.

same for me, When I try and use the main system brightness control at the lower levels the display tends to have uneven strips that are lighter and darker.
its like if the monitor turns on and off very rapidly, like high speed blinks, i use an app called SHADE, it dims the monitor (dont now how) the screen dont flicker anymore and its free
http://www.charcoaldesign.co.uk/shades
Unlike other solutions, Shades doesn't change your display settings, and won't screw up your monitor's colour profile.
BY THE WAY, MAYBE ITS A PROBLEM RELATED TO THE FREEZING IMACS DUE TO THE ATI GPU
fine app, right price

IMac Freezing, tells me to power off

Hi
My iMac PPC keeps freezing and telling me to power off or restart.
I notice the internal hard drive icon no longer appears.
I had hoped to resolve this problem by installing my startup disc onto a Firewire drive, but it has not. I can start from the drive and use the computer from anywhere of 5 to 60 minutes before it will freeze again.
Is there anything else I could self service? Do these models have internal batteries that need to be changed? I do keep the iMac plugged into a power strip that I turn off at night.
It is always hard for me to know when to walk away from an older computer.

Thanks. can you direct me to where I can find the battery model number. I know it is somehwere on the Apple site, but I can't seem to find it. I'd rather have the battery in hand before I open it up.
I am also pasting below the error message. I have no idea how to interpret this.
Problem Report for Mac OS X Kernel
Interval Since Last Panic Report: 0 sec
Panics Since Last Report:          1
Anonymous UUID: FD1475F0-27DD-470A-9DD8-FF6EF42321CD
Wed Mar 14 08:53:21 2012
panic(cpu 0 caller 0x00044040): "zalloc: \"threads\" (329068 elements) retry fail 3"@/SourceCache/xnu/xnu-1228.15.4/osfmk/kern/zalloc.c:966
Latest stack backtrace for cpu 0:
      Backtrace:
         0x0009CC88 0x0009D63C 0x00029DA0 0x00044040 0x0003D034 0x0003D3F8 0x0003D490 0x00337D38
         0x00F32CA0 0x00F33E8C 0x00F33F70 0x00F29554 0x00F310F8 0x00F3357C 0x00F333EC 0x0003F2A0
         0x000B1DD4
      Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOATABlockStorage(2.0.6)@0xf26000->0xf38fff
            dependency: com.apple.iokit.IOATAFamily(2.0.1)@0x99f000
dependency: com.apple.iokit.IOStorageFamily(1.5.6)@0x7e9000
Proceeding back via exception chain:
   Exception state (sv=0x35ac1780)
      PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9L31a
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:57:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_PPC
System model name: PowerMac8,1
System uptime in nanoseconds: 898565958496
vm objects:1481900
kernel map entries:2830300
kalloc.32:1368064
kalloc.64:2584576
vm pages:22374484
ipc ports:46470760
threads:308007648
uthreads:136895616
vnodes:1603440
HFS node:1569792
buf.8192:23126016
Kernel Stacks:1359872
Kalloc.Large:3514576
unloaded kexts:
com.apple.driver.Apple02DBDMAAudio         2.5.8f1 - last unloaded 5100439716
loaded kexts:
com.apple.filesystems.msdosfs 1.5.5 - last loaded 2933016418
com.apple.filesystems.autofs     2.0.2
com.apple.driver.AudioIPCDriver         1.0.6
com.apple.GeForcePPC           5.4.8
com.apple.driver.InternalModemSupport          2.4.0
com.apple.driver.MotorolaSM56K       1.3.9
com.apple.driver.AppleOnyxAudio       2.5.8f1
com.apple.driver.AppleTexasAudio      2.5.8f1
com.apple.driver.AppleTexas2Audio    2.5.8f1
com.apple.driver.AppleDACAAudio    2.5.8f1
com.apple.AppleOnboardDisplay         1.15.1
com.apple.driver.AppleSEP      1.3.0
com.apple.driver.PowerMac8_1_ThermalProfile           3.4.0d0
com.apple.driver.AppleSCCSerial        1.3.2
com.apple.driver.AppleK2Driver          1.7.2f1
com.apple.driver.AppleI2S       1.0.1f1
com.apple.driver.AppleLM7x   1.9d0
com.apple.iokit.IOFireWireIP   1.7.7
com.apple.driver.AppleVSP     2.2.2
com.apple.nvidia.nv30hal          5.4.8
com.apple.driver.AppleHWSensor       1.9d0
com.apple.driver.AppleSMUMonitor    1.9d0
com.apple.driver.ApplePulsar   1.5.2d0
com.apple.driver.AppleCPUThermo     2.0.0a0
com.apple.driver.AppleFileSystemDriver          1.1.0
com.apple.driver.AppleUSBHIDMouse            1.2.4b3
com.apple.driver.AppleUSBMergeNub            3.5.2
com.apple.iokit.IOUSBMassStorageClass        2.0.8
com.apple.driver.iTunesPhoneDriver     1.0
com.apple.driver.XsanFilter      2.7.91
com.apple.iokit.IOSCSIMultimediaCommandsDevice   2.1.1
com.apple.iokit.SCSITaskUserClient    2.1.1
com.apple.driver.LSI_FW_500            2.0.9
com.apple.driver.Oxford_Semi 2.0.9
com.apple.driver.initioFWBridge           2.0.9
com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit           2.0.9
com.apple.driver.StorageLynx 2.0.9
com.apple.iokit.IOATABlock
Model: PowerMac8,1, BootROM 5.2.2f4, 1 processor, PowerPC G5 (3.0), 1.8 GHz, 2 GB
Graphics: GeForce FX 5200, GeForce FX 5200, spdisplays_agp_device, 64 MB
Memory Module: DIMM0/J4000, 1 GB, DDR SDRAM, PC3200U-25440
Memory Module: DIMM1/J4001, 1 GB, DDR SDRAM, PC3200U-30330
Modem: Jump, V.92, Version 1.0
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD2500AAJS-41RYA0, 232.89 GB
Parallel ATA Device: MATSHITADVD-R   UJ-825
USB Device: SAC-Click free, (null) mA
USB Device: Hub in Apple Extended USB Keyboard, (null) mA
USB Device: Apple Optical USB Mouse, (null) mA
USB Device: Mass Storage, (null) mA
USB Device: Apple Extended USB Keyboard, (null) mA
FireWire Device: FreeAgent GoFlex, Seagate, 400mbit_speed

IMac 27inch screen flickering

The left bottom side of my 6 month iMac 27inch gets flickering and darker, and if I press on the screen, it gets the correct lightning. What should I do? Is there any way to repair this by software? Or do I have to call apple care? thanks

Flickering would be covered by the warranty. I would recommend buying AppleCare though, you can find it discounted by doing a little searching. For example on Amazon I see it for about $130.00

My computer shows the grey screen that says i need to restart when i tray and boot from an external hard drive

It shows the grey screen that i need to restart when i try to boot from an external hard drive. both drives have snow leopard

Kernel Panics? Don't panic too!
"You need to restart your computer" (kernel panic) message appears (Mac OS X v10.5, 10.6)

New iMac 27inch screen flickering/tearing/shutoff

I have been experiencing some problems with the all new iMac 27inch display.
At non-fixed intervals i will get one of the following:
Screen distortion/flicker somewhere random in the screen (feels like it is more in the lower part) that looks like a horizontal bar of about 2-3inches just popping in and out of the screen.
Screen will go completely black for a second and then come back on. Sometimes 2-3 times in a row.
Somebody else already made some video-clips about these problems, I am experiencing exactly the same behaviour.
http://www.youtube.com/watch?v=SjOxlxVz5Os
http://gallery.me.com/larzy#100025
Just to not that in the course of writing this post my screen has flickered 13 times and has gone black 2 times.

I received my 27" iMac three days ago and ever since i got it out of the box and turned it on it has done the same as the video shows.
Last night i watched a 30 min programme on BBC iPlayer and the 2-3 inch white lines kept popping up every few seconds horizontally across the screen. The screen also went black momenterally on 6 occasions.
I cannot believe after three days that this problem is so bad. I spome with Apple this morning on the Apple Care line and they told me to:
1. Shut down and take out power cord for 20 secs then turn back on.
2. Shut Down and then hold down "D" when turning back on which performed a hardware test...
Both had no effect.
Luckilly i am still within the 14 days of recieving my iMac and they are sending out a replacement but i am worried that this machine will have the same problems...
Is anyone happy with theres and is anyone not experiencing this problem... There seems to be a big issue here???

IMac black screen and flashing power light

I installed several system updates on my 2007 iMac last night, running OS 10.7, and today I can only get a black screen with a flashing white power light when I try to start up. My computer will neither start up nor completely shut down, and my wired keyboard won't communicate either. Help!

Power down, unplug if needed.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk.

Imac 2009 screen flickers in lion

It's back! Since upgrading to Lion, the infamous 27" 2009 iMac screen flicker has cropped back up. Its not so often, and usually not too long after it wakes up. Anyone else seeing this? What to do?

Actually, I've just noticed that it also flickers if I tap the right spot during the BIOS bootup (gray screen when laptop first turns on). Disabling the SMS in MacOS didn't make a difference, so I'm going to assume it's hardware and get that logic board that's troubling everyone else replaced...
Thanks for your help...

Computer freezes, screen flickers, then distorts

I'm watching a movie and then the screen freezes, and then distorts, I can hear the HD and optical drives still running. This didn't happen before I updated the software last night. What is the problem and how do I fix it?

Hi mtmike1, just wondering what the two different libraries Apple support ask you to drag the cache folders to trash were, my partners laptop having similar problems.
cheers Andy

IMac freezing after start because of failed transfer

Hello,
Last night I tried transferring two videos over a network which ended up failing. Not thinking much about it, I just placed those two video files on that local computer to just do a usb transfer this morning. Well, getting to the target computer, I notice something like the picture attached.
It is like the computer saw the failed transfer and kept trying to do the transfer. Also, mouse is still working. I just cannot use the dock, finder, or any other application.
I have tried safe booting, this works but obviously you do not want to stay in safe boot. I have repaired the disk and noticed a speed jump in startup which was nice but ultimately did not fix my issue. I have tried restarting (obviously) which did not help my problem.
Any other ideas? Would love to get this up and rolling for this is my editing machine.
Thanks for any input you have.

Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

Portege M400 freezes, screen goes black and fan speed increase when moved

Can someone please help me?
I recently received the Portege M400 from a friend 4 days ago and reformatted to Windows XP Tablet edition.
All was going well until I wanted to move the laptop to my coffee table, but as soon as I move the laptop it freezes, the screen goes black and the fan speed increases dramatically!,
So far I have had no success in fixing this problem and I much appreciated is some one could help me!

Hi there,
I have the same laptop. Bought it from a friend also! That was a year ago. It was working perfectly till 6 months ago when I had it going 100% like yours. Screen freezes, fan speeds up and hangs up once it is moved. Recently, even if it doesnt move it hangs up also. I have tried many things like reinstalling drivers and Windows.....etc.
I dont think it is Windows problem or drivers problem, because if you run BIOS and try to move the laptop, it also hangs up!!
Tried updating the BIOS, also no benefit. I ended up opening the laptop and having a look to the motherboard (thinking that I could see something that I could fix!! But again, did not get any results.
I tried also disconnecting peripherals one by one to see whether I could spot the problem, I disconnected the battery, the hard disk, the optical drive, the wirelss modem (from inside), memory, and even the bluetooth, but could not spot the culprit.
I believe now that the problem is basically the motherboard (sort of wear and tear insulation problem) and it is beyond my humble expertise.
I am sure if I would contact TOSHIBA, they would not be of much benefit as I am a second hand user. And if I try to buy from them a main board, they will charge me hell of money.
I hope that this is helpful for you to avoid you wasting your time like me.
Please if you would come into any progress, let me know. Likewise, I would be happy to update you.

Applet failed to load when visited using HTTPs protocol with Java 7

We have a java applet on our website which worked for ages. Then Java 7 came out, people installed it. When people with Java 7 visiting our website using HTTPS, the applet failed to load (ClassNotFoundException). The same site and the same applet, when visit using regular HTTP, it works fine.
People with previous version of Java (1.6.x) can see the applet using either HTTP or HTTPs with no problem.
Anything we can do on our side to resolve this problem for people with Java 7 and like to stay with HTTPS?
Googled and didn't see any relevant result. Any pointer would be much appreciated.

Thanks for the quick response.
Not much on the stack trace, did a tread dump below.
It is an application requires login, please sent and email to [email protected] and I will sent you the url and login info by email.
Thanks
plugin2manager.parentwindowDispose
Java Plug-in 10.4.0.22
Using JRE version 1.7.0_04-b22 Java HotSpot(TM) Client VM
User home directory = C:\Users\dchen
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Dump thread stack ...
2012-05-10 17:17:59
Full thread dump Java HotSpot(TM) Client VM (23.0-b21 mixed mode, sharing):
"D3D Screen Updater" daemon prio=8 tid=0x04fa1800 nid=0x530 in Object.wait() [0x0a0df000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at sun.java2d.d3d.D3DScreenUpdateManager.run(Unknown Source)
     - locked <0x296c0248> (a java.lang.Object)
     at java.lang.Thread.run(Unknown Source)
"ConsoleTraceListener" daemon prio=4 tid=0x04fa0000 nid=0x269c in Object.wait() [0x09c8f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:503)
     at com.sun.deploy.uitoolkit.ui.ConsoleTraceListener$ConsoleWriterThread.run(Unknown Source)
     - locked <0x296c0c90> (a com.sun.deploy.uitoolkit.ui.ConsoleTraceListener$BoundedStringBuffer)
"AWT-EventQueue-1" prio=6 tid=0x04fa2000 nid=0x1730 waiting on condition [0x0a6ce000]
java.lang.Thread.State: RUNNABLE
     at com.sun.deploy.uitoolkit.ui.ConsoleHelper.dumpAllStacksImpl(Native Method)
     at com.sun.deploy.uitoolkit.ui.ConsoleHelper.dumpAllStacks(Unknown Source)
     at com.sun.deploy.uitoolkit.impl.awt.ui.SwingConsoleWindow$2.actionPerformed(Unknown Source)
     at javax.swing.JComponent$ActionStandin.actionPerformed(Unknown Source)
     at javax.swing.SwingUtilities.notifyAction(Unknown Source)
     at javax.swing.JComponent.processKeyBinding(Unknown Source)
     at javax.swing.KeyboardManager.fireBinding(Unknown Source)
     at javax.swing.KeyboardManager.fireKeyboardAction(Unknown Source)
     at javax.swing.JComponent.processKeyBindingsForAllComponents(Unknown Source)
     at javax.swing.JComponent.processKeyBindings(Unknown Source)
     at javax.swing.JComponent.processKeyEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.KeyboardFocusManager.redispatchEvent(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
     at java.awt.EventQueue.access$000(Unknown Source)
     at java.awt.EventQueue$3.run(Unknown Source)
     at java.awt.EventQueue$3.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
     at java.awt.EventQueue$4.run(Unknown Source)
     at java.awt.EventQueue$4.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
"TimerQueue" daemon prio=4 tid=0x04f9e000 nid=0x3e0c waiting on condition [0x09f3f000]
java.lang.Thread.State: WAITING (parking)
     at sun.misc.Unsafe.park(Native Method)
     - parking to wait for <0x24620900> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
     at java.util.concurrent.locks.LockSupport.park(Unknown Source)
     at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(Unknown Source)
     at java.util.concurrent.DelayQueue.take(Unknown Source)
     at javax.swing.TimerQueue.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
"AWT-EventQueue-4" prio=4 tid=0x04fa1400 nid=0x255c waiting on condition [0x0945f000]
java.lang.Thread.State: WAITING (parking)
     at sun.misc.Unsafe.park(Native Method)
     - parking to wait for <0x246209e8> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
     at java.util.concurrent.locks.LockSupport.park(Unknown Source)
     at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(Unknown Source)
     at java.awt.EventQueue.getNextEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
"Applet 5 LiveConnect Worker Thread" prio=4 tid=0x04f9f400 nid=0x3994 in Object.wait() [0x05d9f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:503)
     at sun.plugin2.main.client.LiveConnectSupport$PerAppletInfo$LiveConnectWorker.run(Unknown Source)
     - locked <0x24620ac8> (a java.lang.Object)
     at java.lang.Thread.run(Unknown Source)
"AWT-EventQueue-0" prio=6 tid=0x04f9fc00 nid=0x3b2c waiting on condition [0x0608f000]
java.lang.Thread.State: WAITING (parking)
     at sun.misc.Unsafe.park(Native Method)
     - parking to wait for <0x2979ab70> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
     at java.util.concurrent.locks.LockSupport.park(Unknown Source)
     at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(Unknown Source)
     at java.awt.EventQueue.getNextEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
"AWT-Shutdown" prio=6 tid=0x04f9e800 nid=0x244c in Object.wait() [0x0669f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:503)
     at sun.awt.AWTAutoShutdown.run(Unknown Source)
     - locked <0x2979acd8> (a java.lang.Object)
     at java.lang.Thread.run(Unknown Source)
"TimerQueue" daemon prio=6 tid=0x04fa0c00 nid=0x3914 waiting on condition [0x0a65f000]
java.lang.Thread.State: WAITING (parking)
     at sun.misc.Unsafe.park(Native Method)
     - parking to wait for <0x29c27340> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
     at java.util.concurrent.locks.LockSupport.park(Unknown Source)
     at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(Unknown Source)
     at java.util.concurrent.DelayQueue.take(Unknown Source)
     at javax.swing.TimerQueue.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
"JVM[id=2]-Heartbeat" daemon prio=6 tid=0x04f9ec00 nid=0x3c98 in Object.wait() [0x0687f000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at sun.plugin2.main.server.HeartbeatThread.run(Unknown Source)
     - locked <0x2979a7a0> (a sun.plugin2.main.client.PluginMain$Heartbeat)
"Browser Side Object Cleanup Thread" prio=6 tid=0x04f9d000 nid=0x3ce4 in Object.wait() [0x0710f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0x2979a958> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     - locked <0x2979a958> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     at sun.plugin2.main.client.LiveConnectSupport$BrowserSideObjectCleanupThread.run(Unknown Source)
"CacheCleanUpThread" daemon prio=6 tid=0x04f9dc00 nid=0x2500 in Object.wait() [0x0655f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0x2979a978> (a com.sun.deploy.cache.CleanupThread)
     at java.lang.Object.wait(Object.java:503)
     at com.sun.deploy.cache.CleanupThread.run(Unknown Source)
     - locked <0x2979a978> (a com.sun.deploy.cache.CleanupThread)
"CacheMemoryCleanUpThread" daemon prio=6 tid=0x04f9d400 nid=0x1ac4 in Object.wait() [0x0611f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0x2979aa68> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     - locked <0x2979aa68> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     at com.sun.deploy.cache.MemoryCache$LoadedResourceCleanupThread.run(Unknown Source)
"SysExecutionTheadCreator" daemon prio=6 tid=0x04f9c800 nid=0x3ff4 in Object.wait() [0x0660f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:503)
     at sun.plugin.util.PluginSysUtil$SysExecutionThreadCreator.run(Unknown Source)
     - locked <0x2979aa88> (a sun.plugin.util.PluginSysUtil$SysExecutionThreadCreator)
"AWT-Windows" daemon prio=6 tid=0x04f8f000 nid=0x3480 runnable [0x026af000]
java.lang.Thread.State: RUNNABLE
     at sun.awt.windows.WToolkit.eventLoop(Native Method)
     at sun.awt.windows.WToolkit.run(Unknown Source)
"Java2D Disposer" daemon prio=10 tid=0x04f8d000 nid=0x1920 in Object.wait() [0x064ff000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     - locked <0x2979ad68> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     at sun.java2d.Disposer.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
"Java Plug-In Pipe Worker Thread (Client-Side)" daemon prio=6 tid=0x04f8a000 nid=0x580 runnable [0x0617f000]
java.lang.Thread.State: RUNNABLE
     at sun.plugin2.os.windows.Windows.ReadFile0(Native Method)
     at sun.plugin2.os.windows.Windows.ReadFile(Unknown Source)
     at sun.plugin2.ipc.windows.WindowsNamedPipe.read(Unknown Source)
     at sun.plugin2.message.transport.NamedPipeTransport$SerializerImpl.read(Unknown Source)
     at sun.plugin2.message.transport.NamedPipeTransport$SerializerImpl.readByte(Unknown Source)
     at sun.plugin2.message.AbstractSerializer.readInt(Unknown Source)
     at sun.plugin2.message.transport.SerializingTransport.read(Unknown Source)
     at sun.plugin2.message.Pipe$WorkerThread.run(Unknown Source)
"Timer-0" prio=6 tid=0x04f3d800 nid=0x2c38 in Object.wait() [0x0521f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0x2979b0a8> (a java.util.TaskQueue)
     at java.lang.Object.wait(Object.java:503)
     at java.util.TimerThread.mainLoop(Unknown Source)
     - locked <0x2979b0a8> (a java.util.TaskQueue)
     at java.util.TimerThread.run(Unknown Source)
"traceMsgQueueThread" daemon prio=6 tid=0x04f19c00 nid=0x3b50 in Object.wait() [0x054cf000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:503)
     at com.sun.deploy.trace.Trace$TraceMsgQueueChecker.run(Unknown Source)
     - locked <0x298209e0> (a java.util.ArrayList)
     at java.lang.Thread.run(Unknown Source)
"Service Thread" daemon prio=6 tid=0x04e80c00 nid=0x2930 runnable [0x00000000]
java.lang.Thread.State: RUNNABLE
"C1 CompilerThread0" daemon prio=10 tid=0x04e7c400 nid=0x2648 waiting on condition [0x00000000]
java.lang.Thread.State: RUNNABLE
"Attach Listener" daemon prio=10 tid=0x04e7b000 nid=0x1b5c runnable [0x00000000]
java.lang.Thread.State: RUNNABLE
"Signal Dispatcher" daemon prio=10 tid=0x04e77c00 nid=0x1bd0 runnable [0x00000000]
java.lang.Thread.State: RUNNABLE
"Finalizer" daemon prio=8 tid=0x022e1000 nid=0x3d00 in Object.wait() [0x04c5f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     - locked <0x2979b330> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     at java.lang.ref.Finalizer$FinalizerThread.run(Unknown Source)
"Reference Handler" daemon prio=10 tid=0x022df800 nid=0x3644 in Object.wait() [0x04bdf000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:503)
     at java.lang.ref.Reference$ReferenceHandler.run(Unknown Source)
     - locked <0x2979a0c8> (a java.lang.ref.Reference$Lock)
"main" prio=6 tid=0x0036d800 nid=0x2f40 in Object.wait() [0x00a2f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at sun.plugin2.message.Queue.waitForMessage(Unknown Source)
     - locked <0x2979b3b8> (a sun.plugin2.message.Queue)
     at sun.plugin2.message.Pipe$1.run(Unknown Source)
     at com.sun.deploy.util.Waiter$1.wait(Unknown Source)
     at com.sun.deploy.util.Waiter.runAndWait(Unknown Source)
     at sun.plugin2.message.Pipe.receive(Unknown Source)
     at sun.plugin2.main.client.PluginMain.mainLoop(Unknown Source)
     at sun.plugin2.main.client.PluginMain.run(Unknown Source)
     at sun.plugin2.main.client.PluginMain.main(Unknown Source)
"VM Thread" prio=10 tid=0x022de400 nid=0x3cc0 runnable
"VM Periodic Task Thread" prio=10 tid=0x04ea9000 nid=0x3fd4 waiting on condition
.main.client.PluginMain.run(Unknown Source)
     at sun.plugin2.main.client.PluginMain.main(Unknown Source)
"VM Thread" prio=10 tid=0x022de400 nid=0x3cc0 runnable
"VM Periodic Task Thread" prio=10 tid=0x04ea9000 nid=0x3fd4 waiting on condition
Done.

IMac freezes, screen flickers, simply power fails or restarts when visiting Javascript "heavy" pages in safari

Similar Messages

Maybe you are looking for