Imac g4 will not boot from restore cd

hi there everyone today i tryed booting my imac g4 into the mac os 9 restore for my imac and it loads up to the box with the bar and you can move the mouse and then you see a bar that say's starting mac os 9 and then you wait abit and then the screen go's black with a mouse on the screen and you move it but no mac os has booted i do not know what this is i have reset the nvram and pram but still nothing plz help i want os 9 on my imac so i can play my games thank you

It may need a new PRAM battery.  Especially if you are sure you have the discs that came with the computer.  No other discs except newer Apple retail discs will work.  Retail means not OEM, and not too new to run.  700 Mhz, and 800 Mhz with Superdrive iMac G4s are the only ones that will boot into Mac OS 9 using their prebundled OS 9 discs.  The combo drive 800 Mhz model can only use OS 9 in Classic.  Classic is only available up to Mac OS X 10.4.11, and under 1 GHz models can use up to 10.4.6 retail, and 10.4.11 combo PowerPC to maximize their operating system.  1 GHz and higher can use 10.5.6 retail and upgrade up to 10.5.8 combo, but lose Classic on the same partition if taken up to 10.5 and above.

Similar Messages

  • MBP 13" (2010 model) will not boot from Restore DVD!

    I just upgraded the HDD on my 13" MBP to the 1TB Toshiba MK1059GSM. The MBP is 3 weeks old. Upgrade went fine in terms of the process. However, when I insert the OS restore DVD that came with the machine and restart (using ALT/OPTION) and select to boot from the DVD, the Apple logo appears with the spinner and the system just stays like this. I can hear the DVD spinning but nothing elese ever happens! Any ideas as to what could be wrong? Could it be that this new Toshiba HDD is not compatible and the DVD does not have a driver for it?

    +*Could it be that this new Toshiba HDD is not compatible and the DVD does not have a driver for it?*+
    SATA drives use a standard interface and no additional drivers are necessary. That's not to say that the drive itself can't be faulty. As has been suggested, try removing the drive and see if you can boot from the DVD. If that works, you can be pretty sure there may be a problem with your new hard drive. Hopefully you kept your original drive so you can always put that back in. Faulty hardware can always be frustrating because you never think that's the problem. Let us know how you make out.

  • 1.8Ghz iMac G5 - Will not boot from HD or other startup volume

    Okay, thought I would post here regardless that this seems to be a "take it in for service" issue...
    The iMac was running painfully slow last night, so I walked away and did not manually sleep it. This morning, it seemed to be asleep except that the light was not pulsing, but was full-on bright. Attempts to wake it were fruitless, so I attempted to force it down via the power switch and restart. Upon rebooting (which took a few minutes longer than usual), it got to the apple and pinwheel/gear screen, then went black except for the arrow cursor in the upper left corner, which changed after a time to the "beachball" (not spinning).
    I then tried resetting the PRAM and SMU, no change.
    I tried rebooting in safe mode and got to the login screen, but the keyboard and mouse are not being recognized.
    I then tried rebooting in single-user mode to run fsck, but once at the prompt, the keyboard is again not being recognized.
    Attempts to startup from a system disk yielded the same thing—black screen, arrow cursor at upper left, etc.
    All devices except the keyboard and mouse have been unplugged throughout all attempts to restart.
    Since I am in the market (possibly now by necessity) for a new iMac, my attention turned to getting my files off the drive... Luckily, it was recognized by my old Powerbook in target mode (yay).
    Any ideas, suggestions?

    Update: Just ran the Hardware Test again, this time the Extended Test, and it reported "2GMC/3/16: built-in." Logic board failure, anyone?
    It seems like I've had more than my fair share of logic board issues with this machine... It was replaced while under the original warranty and again last December on Apple's dime when I raised a bit of **** about it, and now it seems to have failed again. The last replacement only had a 90-day warranty, so I guess I'm hosed this time.

  • IMac will not boot from any mode except Target Disk

    I have an Early 2008 Penryn iMac 24" MB398LL/A running OS X 10.7.4 (see specs below) that will not boot from ANY mode, It also has several strange vertical bars from top to bottom on the screen. They are about 10 px wide, with some pixels empty and looks a bit like a barcode if you squint at it.
    I have tried Safe Boot, Force Boot, DVD Boot, FireWire/USB Boot,  and it always gets to the same point. It gets to the apple screen with the spinning gear and then after about 8 seconds it freezes. The only way it works at all is in Target Disk Mode. It pops right up on my Macbook Pro and I was able to grab all my info!
    I have run Disc Utilities and Tech Tool on it many times from my MBP and it passes every test.
    I reformatted the HD and installed 10.7 again, it still freezes up at the same point. 
    I have tried using Single User mode and every time have had to run /sbin/fsck -fy twice because it always says the disk is ok but it was modified on the first pass.
    I thought maybe it had a bad video card or logic board but and I ran the Apple Hardware Test on many occasions and it always passes. Recently I was told about Loop Mode and just completed running the AHT for just over 30 hours without any errors at all.
    UPDATE...
    Strange Part… I tried installing Mountain Lion in Target Disk Mode and everything went smoothly. When it restarted on its own the lines on the screen were gone for the moment, but the Mac still freezes up on the spinning gear and immediately restarts on its own.  I have run every thing listed above on it and still nothing. Sometimes the lines reappear then in two more starts they are gone.
    I did manage to have it start one time got a copy of the  the error report (its at the bottom too) The Mac ran for at least 30 minutes with no problems, then the screen went crazy a few seconds and it became unresponsive. The mouse moved but that was all it could do. Now my iMac continually restarts itself, I don't have any more ideas, HELP!
    Specs...
    The iMac "Core 2 Duo" 3.06 24-Inch Aluminum (Early 2008/Penryn) features a 3.06 GHz Intel "Core 2 Duo" processor (E8435), with two independent processor "cores" on a single silicon chip, a 6 MB shared level 2 cache, a 1066 MHz system bus, 2 GB of RAM (800 MHz DDR2 SDRAM, PC2-6400), a 500 GB (7200 RPM) Serial ATA hard drive, a vertically-mounted slot-loading DVD±R DL "SuperDrive", NVIDIA GeForce 8800 GS graphics acceleration with 512 MB of GDDR3 memory, a built-in iSight video camera, and built-in stereo speakers underneath the 24" glossy TFT Active Matrix LCD (1920x1200 native) display.
    Error Report…
    Sat Sep  1 17:13:12 2012
    panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
    RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
    RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
    R8:  0x0000000000000000, R9:  0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
    R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
    RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0

    Here is the complete error log...
    Sat Sep  1 17:13:12 2012
    panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
    RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
    RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
    R8:  0x0000000000000000, R9:  0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
    R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
    RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80602db800 : 0xffffff801a41d5f6
    0xffffff80602db870 : 0xffffff801a4b7b95
    0xffffff80602dba40 : 0xffffff801a4ce4ad
    0xffffff80602dba60 : 0xffffff7f9bab8654
    0xffffff80602dbb60 : 0xffffff7f9baa218c
    0xffffff80602dbbb0 : 0xffffff7f9baa20e2
    0xffffff80602dbbd0 : 0xffffff7f9ba73554
    0xffffff80602dbc00 : 0xffffff7f9aa8d470
    0xffffff80602dbc40 : 0xffffff7f9aa8d3df
    0xffffff80602dbc60 : 0xffffff7f9aa926ec
    0xffffff80602dbcf0 : 0xffffff7f9aa8af20
    0xffffff80602dbd20 : 0xffffff7f9aadacc7
    0xffffff80602dbd70 : 0xffffff801a833b9b
    0xffffff80602dbdc0 : 0xffffff801a862d57
    0xffffff80602dbe30 : 0xffffff801a497cef
    0xffffff80602dbe80 : 0xffffff801a420abd
    0xffffff80602dbeb0 : 0xffffff801a410448
    0xffffff80602dbf00 : 0xffffff801a4195fb
    0xffffff80602dbf70 : 0xffffff801a4a5ad6
    0xffffff80602dbfb0 : 0xffffff801a4ced13
          Kernel Extensions in backtrace:
             com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000->0xffffff7f9aab8fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
             com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aad8 000->0xffffff7f9addafff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
             com.apple.GeForce(8.0)[4B9BE287-5251-398E-96B0-BB16C9BFB2D9]@0xffffff7f9ba72000 ->0xffffff7f9bb34fff
                dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aa d8000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    12B19
    Kernel version:
    Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
    Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
    Kernel slide:     0x000000001a200000
    Kernel text base: 0xffffff801a400000
    System model name: iMac8,1 (Mac-F227BEC8)
    System uptime in nanoseconds: 26349024446
    last loaded kext at 22534854703: com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2 (addr 0xffffff7f9c489000, size 12288)
    loaded kexts:
    com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2
    com.apple.driver.AppleHDA          2.3.0f2
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.filesystems.autofs          3.0
    com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
    com.apple.iokit.IOBluetoothUSBDFU          4.0.9f8
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleMuxControl          3.2.6
    com.apple.driver.AppleBacklight          170.2.3
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.GeForce          8.0.0
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.2.6
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleIRController          320.15
    com.apple.iokit.SCSITaskUserClient          3.5.1
    com.apple.driver.AppleFileSystemDriver          3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.2.1
    com.apple.driver.AppleFWOHCI          4.9.5
    com.apple.driver.AppleUSBHub          5.1.6
    com.apple.driver.AirPortBrcm43224          600.36.17
    com.apple.iokit.AppleYukon2          3.2.3b1
    com.apple.driver.AppleAHCIPort          2.4.0
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AppleUSBEHCI          5.1.5
    com.apple.driver.AppleUSBUHCI          5.1.5
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleACPIButtons          1.6
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.6
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.driver.DspFuncLib          2.3.0f2
    com.apple.iokit.IOAudioFamily          1.8.9fc9
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.nvidia.nv50hal          8.0.0
    com.apple.NVDAResman          8.0.0
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleHDAController          2.3.0f2
    com.apple.iokit.IOHDAFamily          2.3.0f2
    com.apple.iokit.IOSurface          86.0.2
    com.apple.iokit.IOBluetoothFamily          4.0.9f8
    com.apple.driver.AppleGraphicsControl          3.2.6
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.AppleSMC          3.1.3d11
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.2.0d16
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.1.5
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOATAPIProtocolTransport          3.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IO80211Family          500.15
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOAHCIFamily          2.2.0
    com.apple.iokit.IOATAFamily          2.5.1
    com.apple.iokit.IOUSBFamily          5.1.6
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.8.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          344
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.6
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 2 GB, SMC 1.30f1
    Graphics: NVIDIA GeForce 8800 GS, NVIDIA GeForce 8800 GS, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.16)
    Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
    Serial ATA Device: WDC WD5000AAKS-40YGA1, 500.11 GB
    Parallel ATA Device: MATSHITADVD-R   UJ-875
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1a100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
    USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1002, 0x1d100000 / 2
    USB Device: Trackball, 0x046d  (Logitech Inc.), 0xc404, 0x1d120000 / 4
    USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x0204, 0x1d110000 / 3

  • RE: HP XP Media Center 2005 Ed will not boot from HP System Restore CD's

    RE: HP XP Media Center 2005 Ed will not boot from HP System Restore CD's.
    The following instructions about  the "Code Purple" error FAILED. Error is still present.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ***PLAIN ENGLISH QUICK AND EASY FIX FOR ALL SYSTEMS****
    ***Windows 7 code purple or Windows Vista code purple***
    With the code purple error on the screen, press shift+f10 (the shift key and the F10  key (at the top of the keyboard) at the same time) to open a little screen called a  command prompt. (So, you get a little black screen with white text that says something  about your Windows verison first and a little ways down you'll see "C:\>".   It's all  ready for you to start typing.)
    Type the following line, just as you see it here...
    notepad C:\hp\bin\checkdmi\checkdmi.cmd
    so it will look like this
    C:\>notepad C:\hp\bin\checkdmi\checkdmi.cmd
    Press Enter.
    You will see the text for the file listed in a window using a simple text editor.
    Go to the beginning of the text. Press enter to make a space. Type this...
    goto cleanup
    So, whatever comes after, the first line looks like this...
    goto cleanup
    Save the file and exit notepad and restart your PC. You are good to go.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    RESULT: Same error and problem.
    So, NOW THE SCENARIO IS THIS...[ And A CHALLANGE TO ALL HP Software EXPERTS]
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    1. The PC will not boot the System Restore CD's
    2. The Original OS install and [HP_RECOVERY] disk sector has been severely damaged by
    all of the following:
        A. Massive Virus Infections as shown by Kaspersky Virus Scan and cleaned up.
        B. The user had originally updated the pc to Vista Business Express Upgrade
            (Supplied by HP with the original purchase and warranty).
             (Prior to the upgrade, Media Center was working correctly.)
        C. The original OS product key(XP Media Center Ed. 2005) has been changed by the Vista Business Express upgrade.
        D. The destructve recovery done by PC-Doctor has done user file damage(s).
        E. All software, and possibly hardware could be corrupted & damaged by viruses,
        incomplete recovery, and the unknown failures and conditions.
    To sum up, the system is locked in an unknown state, waiting for expert help.
    (I can allow and manage to let someone diagnose, repair remotely using another OS  i.e.Linux Opensuse 12.1, or XP Home ed if needed.)
    SO IF YOU THINK YOU ARE UP TO THIS CHALLANGE, SEND MESSAGES TO DAVHPForum anytime. Thanks in advance!
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

    Hello @DAVHPForum,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how you are not able to boot your computer using the HP system restore CDs, and I would be happy to assist you in this matter!
    If you are not able to recover your system by following the steps in this document, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • I have a mid-2010 27" Quad Core i5 iMac running 10.8.3.  Startup disk recognizes the primary hard drive as a startup volume but will not boot from it.  Have tried zapping PRAM, ran disk utility.  No errors reported  Any thoughts?

    I have a mid-2010 27" Quad Core i5 iMac running 10.8.3.  Startup disk recognizes the primary hard drive as a startup volume but will not boot from it.  Have tried zapping PRAM, ran disk utility.  No errors reported  Any thoughts?

    My bad Eric. The startup preference recognizes the primary as a 10.8.3 startup volume but when u select it the system does not boot. I can only boot from my external backup drive

  • Flat Screen imac iMac won't boot up, will not boot from DVD

    My 24" imac flat screen will not boot. I only get a blank gray/white screen. Reset the PRAM and tried to boot from the DVD. I held the C key down when I powered on but the system will not boot from the DVD. If I wait long enough, the DVD will eventually be ejected. I have had HD issues and Disk Warrior indicated that the drive was damaged. Will a dead hard drive cause the system to not boot from the DVD? Is there any way to get the system to boot from my DVD?

    Hello PMcDer,
    Welcome to Apple Discussions!
    By what you are describing you're correct in believing your drive is probably gone. The sad news... if Disk utility can no longer see the drive, your ability to retrieve any data off of it is getting slim.
    There are a couple of options for data retrieval.
    1. If you still have Apple Care have them fix it. But make sure they know that you do not have a backup.
    2. If you do not have Apple Care, have an Authorized Apple Tech replace the drive and make sure that they will give you back the old drive. This may prove to be a challenge. Or you can replace the drive yourself. It is not easy for some but take your time and you'll have no problems. Lots of youtube videos on this as well as on-line tutorials.
    3. You could try a Hard Disk Utility program like Disk Warrior to see if it can help, but it's not free.
    4. You could pay someone big bucks for Data recovery in order to get the data of the drive for you.
    If you decided to do the HDD swap yourself. You could purchase a 3.5" firewire enclosure that you could put your old drive into once you do the swap. Plug it into the iMac and prey that it recognizes it. Then "MAYBE" you could copy the data over to the new drive, but that is a stretch.

  • Imac 27 will only boot from internal and from factory install DVD?

    I was trying to create a bootable external source for my iMac 27 and came across a pretty odd scenario. One that Apple iteslef says they have never seen before. Love any feedback on how to create a external bootable source. Below are my notes from the 45 minute conversation I just had with Applecare.
    My iMac 27 purchased in December, 2010 Will not boot from:
    Apple Factory Install DVD (white printed with Snow Leopard)
    TechTool Pro 5.06 DVD
    SD Card with Bootlable installation
    EXT HDD with previous bootable (Leopard 10.5.9) system on it
    eDrive on an EXT HDD
    I had a 45 conversation with Applecare and the tech has never heard or seen a situation like this one.
    Every source shows up if I hold the "option" key down upon power up.
    Every source shows up in the System Prefs Startup window (though there was one oddity that he had not seen before. I have to authenticate each and every time I try to change my startup disk in the Startup Disk Prefs)
    Every source other than the internal has the same result if I try to boot into it, gray screen with dark gray Apple logo, no gears running, no optical accessing, just the gray screen forever.
    We reset my PRAM and tried again. No change
    Then the Applecare tech had to get off the phone in order to do some further research.
    He came back and we tried to startup from the DVD that shipped with my iMac, not the white factory Snow Leopard I got from Amazon, but the gray install DVD from Apple.
    This one booted.
    We repaired permissions and checked the internal disk from the Apple Gray Install DVD.
    That is as far as the tech could go. He is sending me out a new copy of Snow Leopard, but is unable to support me in my quest to boot from an external source.
    I am going to try and create a bootable external source using the gray install dvd instead of the commercial Now Leopard one and see what happens.
    Thanks,
    Henry

    The point is that V.K. is correct.
    You cannot create a bootable disk for your iMac from the factory Snow Leopard DVD because your machine was released after Snow Leopard was and as such relies on operating system changes and drivers that exist solely on the disc that came with your machine.
    I'm really surprised if an AppleCare agent didn't know that.
    To create a bootable external drive either use your Software Restore disc or create a bootable clone of your internal drive using an app like Carbon Copy Cloner.

  • G4 that will not boot from any disc EXCEPT the Apple Hardware Test CD

    We have a DP 1ghz Quicksilver PowerMac G4 that will not boot from any disc EXCEPT the Apple Hardware Test CD that came with the machine.
    We were in the process of installing 10.4 Tiger before placing it for sale.
    The Mac was originally OSX Server 10.1 that we later converted to a worksation running 10.3 Panther.
    It has 1 GB of memory, 80GB hardrive, 250MB Zip Drive and a Radeon 7500 video card.
    Since this machine only has a CD-R drive and not a DVD-R, we installed Tiger using another Mac via Target Disk Mode. The installation process went well, but when I tried to reboot I got a Kernel Panic right after startup screen with the grey Apple logo.
    On some reboots we get to the blue startup screen, others it stops at the grey Apple logo, others a black box like the a Kernel Panic - but with no text. Twice it went directly into Open Firmware.
    We have done the following during our troubleshooting:
    - Reseat RAM, Video Card, Hard Drive, Zip & CD-R connections
    - Remove RAM 1 stick at a time and reboot
    - Replace RAM with RAM from another working Quicksilver
    - Replace Video Card with one from another working Quicksilver
    - Zap PRAM
    - Reset CUDA switch
    - Unplug the MAC and remove everything (RAM, Battery, etc) for 30 minutes and try to reboot
    - Tried booting from the Macintosh Server G4 Software Restore CD
    - Tried booting from Mac OS X Server CD
    - Tried booting from AppleCare Protection Plan CD with TechTool
    - Tried booting from Diskwarrior CD
    - Tried booting from an external FireWire drive with a disk image of Tiger OS Install
    - Tried booting with the hard drive disconnected
    The Mac WILL boot from the Apple Hardware Test CD and will pass ALL of the extended tests.

    Conventional wisdom says that any Mac that will not boot up from a System/Install CD OS 9 or an Install CD Mac OS X, has a Hardware problem.
    The diagnostic CD is a red herring because it uses a very primitive method of reading the CD, and so does not properly represent the machines general ability to read CDs.
    I would look at the CD drive cables, etc, and see if another drive gives different results.
    You have not mentioned using the Startup Manager (option key at Startup) to do any checking:
    HT1310- Startup Manager: How to select a startup volume

  • G5 will not boot from internal hd

    I have T-Booted this iMac G5 into FW Target Mode
    Reformatting the HD from another iMac (INTEL)
    Installed OS X 10.5 again
    Booted the iMac (INTEL) off this iMac G5's HD OK
    Setup the system fine and it all works OK.
    BUT if I then try and get the iMac G5 to reboot off it's own internal HD it does not see the system.
    Also, the iMac G% will not boot of the 10.5 Universal Install DVD?
    What am I missing here please ?

    Hi Ralph,
    I could not see any internal HD by starting up with 'option' held down, only the install CD (10.4 CD 1 this time).
    I rebooted into 10.4 Install CD1 and Used Disc Utility .. and there was the drive, but with two partitions on it ??
    I formatted the internal HD drive and made just one Partition.
    I rebooted, this time to a 10.5 Installer and just get to a blue screen.
    So...
    Seems that HD is there and OK?
    This iMac G5 does not like a 10.5 system DVD
    This iMac G5 does like a 10.4 system CD set 01,02,03,04...
    This iMac G5 does have a SuperDrive listed on it's foot BTW.
    What next do we think... just put 10.4 on it?...
    iMac, G5, 20", 512Mb (2 GB now,) 250GG HD, SUPER, 56k, BT, AP
    EMC 2056
    W853024KSDZ

  • After 10.5 upgrade Mac will not boot from hard drive

    I just upgraded to 10.5 Leopard but my mac will not boot from the hard drive even after selecting my hard drive as the startup disk. The mac will start to boot but will cut itself off before the boot is complete. I have to leave the Leopard disk in the mac and hold down C to get the mac to turn on but it only allows me to install the software again.

    instead of archive and install you might first want to try restoring your system using TM to some time point before your failed 10.5.1 upgrade. Then try upgrading to 10.5.1 again. I would suggest downloading the full 110 MB upgrade and installing it manually rather than doing it through the software upgrade menu.
    You can download the upgrade here:
    http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1051update.html

  • IBook G3 will not boot from CD/DVD

    Ok, I have an iBook G3.
    I was restoring it to factory with the Software Restore disks which came with the unit as I was planning to move on to a new unit.. But there was a power cut in the middle of the process and the unit shut off. Now, it does not recognise a HD when booting holding option.
    It also will not boot from any CD/DVD other than the Apple HW Test disk provided with the unit.. All other disks spin up and then get ejected, on the odd occasion it does not eject, it boots to a icon of a floppy diskette with a flashing ? (Saying that, I did manage to get it to load from the restore disk 1 once, but it just said it could not mount the image file)
    The HW test disk returns no problems
    I have reset PRAM multiple times, and reset nvram and all in Open Firmware. I have also reset PMU as a last resort, but no luck
    Any ideas?

    Hi, and welcome to Apple Discussions.
    Do you have DiskWarrior, maybe?

  • T500 will not boot from bootable CDs/DVDs, but will read and open files on them

     System: 2 T500s, both manufactured early April 2009, win XP, ATI Radeon 3650 graphics,4GB RAM, latest Lenovo drivers installed..
     Problem:-   Our 2 T500s cannot boot from any windows coded recovery CD -except Lenovo's rescue/recovery discs. Some -but not all- Linux code recovery CDs do boot the T500. Every other kind of CD and DVD such as audio and video works fine in windows XP.
    Here an example of our 2 T500s' failure to recognise bootable CD/DVD discs. All the files and folders on a Paragon Partition Mgr v8.5 Recovery CD can be viewed in windows explorer and files such as jpg, txt and zip can be opened. This CD will not boot the T500, however, it will boot our other -non-Lenovo- computers. The same applies when the media are DVDs with identical content.
    We have tried several different kinds of CD and DVD media to no avail. Burning the media on other computers and using several kinds of burning software does not help, ourT500s refuse to boot from them too.
    The problem seems clear enough, on starup our T500s fail to distinguish between windows coded bootable and ordinary CDs/DVDs -unless they are Lenovo recovery/restore discs.
    A solution would be gratefully received.

    Thank you for your very kind assistance,
    Q: "1. Did you apply the DVD firmware fix here?"
    A. It was` already installed on our 2 T500s. We have also applied just about every driver update from Lenovo.
    Q: "2. Did you try booting from a USB optical drive that you first attached to another system where you could verify that booting from it was possible?"
     A. Yes, many times from a USB CD/DVD drive, it failed too. We burned on that drive too, but the T500s will not boot from those CDs either.
    Q: "3. In this thread the solution was to use another burning program than Roxio..".
     A. We have used the Paragon internal ISO creator/burner, the Roxio burner that was preinstalled wth the T500, BartPE internal ISO/burner ,InfraRecorder and others too. Made ISOs and burned from them, burned CDs directly on the fly etc, all to no avail..
     For some reason, our two T500s' CD/DVD drive controllers or some intermediate software act as if the CD's boot sector is not present. Clearly, something (BIOS, software, unstable hardware, or ? ) is blocking the read or write of the data necessary to boot these CDs. Whatever that 'something' is, it has no effect on burning and booting Lenovo recovery CDs.
    The bizarre part of all this is that a`Lenovo recovery CD burned on the T500 drive WILL BOOT the T500. A Paragon v8.5 recovery CD or BartPE CD burned in one of our non-Lenovo computers will boot ithat and every other computer we have except our T500s.
    PS Thank you for the link to the new version of Roxio, will download and install it.

  • IBook will not boot from CD

    Disk utility has found problems. Specifically it returned this info:
    Verifying volume “Macintosh HD”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Invalid node structure
    The volume Macintosh HD needs to be repaired.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    I have tried to restart the iBook using the original restore CD, the original install CD, the Leopard CD, the Tiger CD and Norton Utilities CD. The computer will read the discs but will not boot from them so I can't find a way to repair the effected volume.
    Tried Parameter Ram but feel there are deeper problems; just don't know how to get to them.

    knateb, Welcome to the discussion area!
    Just for the record, your iBook shipped with a version of OS X somewhere between OS 10.4.2 and OS 10.4.4. Therefore it will never boot from a retail Tiger (10.4) disc.
    Have you tried resetting the PRAM?
    Have you tried resetting the open firmware? The procedure is
    Start up into Open Firmware by pressing and holding the Command-Option-O-F key combination during startup.
    At the Open Firmware prompt, type: reset-nvram
    Press Return.
    At the Open Firmware prompt, type: reset-all
    Press Return.

  • Mid-2009 MacBook Pro sees internal SATA hard drive, but will not boot from or format

    I inherited a Mid-2009 MacBook Pro (15-inch, 2.53 GHz model) with a very strange issue.
    It first presented itself as not being able to boot from the internal SATA hard drive that came with the computer. Nothing I tried could get it to boot, so I assumed the file system was corrupted beyond repair and booted from a CD to try to format the drive. Disk Utility on the CD would not format the drive, giving me strange error messages like "Unable to write to the last block of the device".
    At this point I figured the drive itself must be toast, so I pulled it out and put another known-good SATA hard drive in, booted from CD, and attempted to format. Again, same error messages and an unsuccesful format.
    So I had the bright idea of formatting one of the drives in an external enclosure and then putting it in the MBP to see if OS X would even install. No dice. Get a cryptic error message before installation even begins.
    So I installed OS X on the drive in the external enclosure and put it in the MBP, and it attempts to boot, but never goes anywhere.
    So to sum up, the symptoms I'm seeing:
    MacBook Pro CAN see internal SATA hard drives.
    MacBook Pro WILL NOT boot from any internal SATA hard drive and cannot format or install OS X to any internal SATA hard drive.
    MacBook Pro WILL boot from any CD or external device and seems to work properly otherwise.
    At this point I'm thinking it's one of two things: the hard drive ribbon cable or the SATA controller on the logic board.
    Since the MacBook Pro seems to work completely fine other than this one issue, and will boot properly from both external devices and the CD (also a SATA device), I'm thinking and hoping that it's just the hard drive ribbon cable. From my searches online, I've heard that this batch of MacBook Pros is known to have issues with the hard drive ribbon cable, but it seems in most cases this manifests itself by the Mac not being able to see a drive at all.
    I've done quite a bit of troubleshooting to get to this point, but right now I'm just looking for any feedback at all. Specifically I'd love to know a way I can easily test to see whether it's the logic board or the cable.

    UPDATE: An interesting development!
    I just tried a third known-good SATA hard drive, one which I believe supports SATA I only (but I'm not sure), and unlike the other drives that the Mac sees but cannot properly interact with, the Mac can't even see this one when I put it inside.
    Frustrating as this may be, I believe I'm actually getting closer to a solution since my symptoms now appear to be closely aligned with people having SATA ribbon cable issues.
    Onward!

Maybe you are looking for