Image Overlapping not proper

Dear All,
I have 3-4 images which are to be overlapped. Infact I have 3-4 JLabels which have these images as their icon set. Now when i overlap them one image rectangular area covers the other images means this does not look transparent. Means if i properly put the one image over other only one is seen.
I have tried with BufferedImage & Alpha-Composite etc but what happen with this if i make it total transparent(0.0) it becomes black (rectangle), if i make it total opaque(1.0) , it covers the other image. If i kept this value in between, some undesired background comes with image.
Please help me out if you have even some idea.
Thanks,
Manoj

Don't crosspost: http://forum.java.sun.com/thread.jsp?forum=20&thread=519433&tstart=0&trange=15

Similar Messages

IOS6... How do I see the full screen when watching youtube videos and second the map quality is very poor, foggy most of the time and images overlap to each other... Can I restore to IOS6 if these problems can not be solved?

I just upgraded to IOS6 and I have some difficulties that I never had on IOS5:
How can a see the full screen when watching youtube. Address bar is always in view.
Maps are foggy and some images overlap to eachother.
If these problems can not be solved, how do I downgrade back to IOS5?
Regards,
Luis

Luis757 wrote:
If these problems can not be solved, how do I downgrade back to IOS5?
Regards,
Luis
No, there is no legitimate way to downgrade iOS to an earlier version.
Be patient, Apple will eventually get around to fixing the "bugs" in iOS 6.
You can leave feedback here: Apple Feedback.

Date Picker Alingment is not proper when we open Date in new Tab

We are facing Date Picker Alignment issue with Safari 5 browser on MAC 10.7.3. Our application is developed in Seam framwork ( which includs JSF and EJB). The issue which we are observing as follows-
There are some links on our application JSF page which opens Date in new window. But when we enable option for opening in tab always and click on Date link, Alingment of new tab opened is not proper.
Please suggest the possible action or pointers to work on this issue.
Images
Date Opened in new Window:
Date Opened in new Tab, Alingment is not proper:
Thanks in advance

Here is more info to describe the issue.
These are the movies sent to the Apple Engineers to show how our
workflow has worked for 7 years until Safari 4 came out.
Again this has caused us to go back to 10.5.8 though we enjoyed some of Snow Leopards improvements.
Have your sound on when listening to safari4 so you can hear the overlaps.
http://jenniradio.com/movies/safari3.m4v
http://jenniradio.com/movies/safari4.m4v
Would really like this fixed.
Ian

While creating pdf from html, the alignment is not proper

Hi,
In my application, I am creating a pdf report from html using (using Generate pdf 1.1 - HTML URL To PDF activity) which contains certain images and descriptions.
But, while generating pdf the alignment is not proper. In the HTML there is no paging, but in the output pdf the image div is getting broken when new pages are generated.
Some blank areas are coming the report.
Actually I need an exact replica of the HTML as a pdf, with paging.
Thank you in advance.

What is the LiveCycle version?
Is it possible for you to share an example(somewhere on public file sharing sites)?

Control mouseover image does not display when contained in an array of clusters.

I have been using system booleans (with some customization) for the ability to impement mouseover animations. For example (default system booleans):
The mouseover feedback works well with my UI, and for the most part everything is going great.
However, the mouseover image does not load if the the boolean is contained within an array of clusters (a single cluster with the boolean inside or an array of booleans works as expected):
The mouseover animation does work for a single array element in the above case (the one which was most recently clicked), but this behavior isn't desirable and it seems buggy if I were to leave this on my UI as it is.
So I guess I'm just wondering if anybody has encountered this or has any suggested workarounds? The few that I've thought of so far (maintain a separate array for any set of system boolean controls, check coordinates myself on mouse move event and try to update the proper element in the array, avoid using mouseover animations entirely for this set of controls) aren't all that desirable. Even though this issue could be considered cosmetic, the UI is very important to me as this code is something shipped to customers.
This is LV 2011 by the way, so if by some chance the behavior in 2012 is correct please let me know (this alone might be reason enough to convert the project up). If there is a CAR ID for this behavior and an NI employee wishes to share it I would also appreciate that.
Best Regards,
John Passiak
Solved!
Go to Solution.

Hey Jason,
A reproducing VI would be any VI that contains an array of clusters with a system control boolean inside. Here's an example:
Single Boolean, Single Cluster, and Array of Booleans all show the proper mouseover image.
Array of Clusters always shows the mouseover effect on the last element which was clicked, but does not show the mouseover effect on other array elements (actually, it seems to be inconsistent--every now and then it does show the mouseover effect on other array elements but it is not at all reliable).
Best Regards,
John Passiak
Attachments:
MouseoverTester.vi ‏9 KB

Time machine - "the backup disk image could not be mounted"

SInce a few days, I am unable to backup via Time Machine.
I always get the message:
TIME MACHINE ERROR
The backup disk image could not be mounted
I use an Apple Time Capsule and still have more than enough free space on it.
Use OS X 10.5.5
Help.....
Tks

Rosy,
*_"The Backup Disk Image Could Not Be Mounted" (Console - “Failed to mount disk image”)_*
First, it is important to distinguish this error message from another, similar Time Machine error that states “The backup volume could not be mounted”. This is important as the causes and cures for these two errors can be very different.
Consider each topic below separately. When one option does not resolve your issue, then move on the next one.
*Unmount the Backup Disk Image* (TC)
If, for some reason, you have manually mounted the Time Machine backup disk image (sparsebundle), or Time Machine failed to eject it after the previous backup, subsequent backups may fail. (Console - “Failed to mount disk image”… “Backup failed with error: 21”)
Eject the backup disk image (white drive icon) by either clicking the little Eject icon to the right of the disk image in the Finders’ Sidebar, or Ctrl-Click the drive icon on the desktop and select “Eject” from the contextual menu. Now try backing up again or launching Time Machine to view previous backups.
*“Disconnect All Users…”:*
If your Time Machine backup drive (“Backup of Users Computer”) is mounted on your desktop or in the Sidebar of the Finder window. then Time Machine may think the drive is already in use. Alternatively, if the Time Capsule hard disk has been recently accessed by a Windows machine, it may not have fully relinquished control. Do the following:
Open Airport Utility and select the Time Capsule on the left.
Click “Manual Setup”.
Select “Disks” at top of window.
Click “Disconnect All Users…” at bottom of window.
Close the Airport Utility.
Now try Backing up again.
“I got it resolved. Apparently it had to do with one of the files being open on the disk from the drive. I had browsed the disk with one of my windows boxes here and it must have left one of the folders "open". Anyway, I rebooted the TC and we are good to go now.”
*Proper Computer Name* #
Make sure your computer has a proper name. Go to System Preferences --> Sharing. Time Machine needs to differentiate your computer from others on your network (i.e. "Bills MacBook" or "Office iMac"). If the "Computer Name" field is blank, create a name. Realize that if this step is necessary, you will likely have to start the Time Machine backup process over again and do another full initial backup.
According to this article, [http://support.apple.com/kb/TS1760], Time Machine may experience problems if your computer name includes certain characters. Make sure the computer name only includes ASCII characters from the following set.
(0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ)
Once a change in the computer name occurs, you should stop and restart Sharing on the affected computer. Uncheck and then recheck Sharing in the Services list on the left.
Let us know if any of the suggestions above resolves your issue.
Cheers!

My Still Image will not fill the Canvas????

I want to create the effect of panning down through space.
I took a still frame from a movie in FCP sized at 720 x 576 and brought it into Photoshop, and made the canvas 720 x 1146 and copied the image and pasted it on top of itself. So my image is now 720 x 1146, and I exported it as a .psd and brought it into FCP.
When dragged from the Browser and into the Timeline, the image does not take the full width of the Canvas. It seems long enough, though now not wide enough to fill the Canvas. What is going on?
Thanks.

well 720x576 is PAL. Why you've got a 640x480 sequence only you can say, if you want it to be 720x576 then you should make a new sequence and choose an appropriate sequence setting.
The reason your still is displaying small in the centre of the frame is that fcp is automatically scaling the 1146 pixels down to fit the 480 pixel height of the sequence. If you set the canvas view size to a small size (25 or 50% and turn on overlays you can click on the corner of the wireframe around you still and drag to resize it to fill the width of the frame and overlap the top and bottom. Move the playhead to the frame you want the tilt down to start and then you can click anywhere within the wireframe to reposition the still. Double click the still in the timeline to load it in the viewer, then go to the motion tab and make a keyframe here, then move the playhead to where the tilt down will end and make another keyframe.

Time machine error: The backup disk image could not be mounted

Time Machine worked OK for several months. Now I get this error every 10 minutes or so.
I unplugged Time Machine capsule and "Change Disk" in Time Machine options.
Nothing helps, I continue to get this error.
I cannot Enter Time Machine either. "Connecting to Server, Connecting to backup" does not work.
Help please because I will probably have to archive and reinstall Leopard. I need the backups,
Christine

Christ1ne,
Before you reformat the disk, consider these causes of this error.
*_"The Backup Disk Image Could Not Be Mounted" (Console - “Failed to mount disk image”)_*
First, it is important to distinguish this error message from another, similar Time Machine error that states “The backup volume could not be mounted”. This is important as the causes and cures for these two errors can be very different.
Consider each topic below separately. When one option does not resolve your issue, then move on the next one.
*Unmount the Backup Disk Image* (TC)
If, for some reason, you have manually mounted the Time Machine backup disk image (sparsebundle), or Time Machine failed to eject it after the previous backup, subsequent backups may fail. (Console - “Failed to mount disk image”… “Backup failed with error: 21”)
Eject the backup disk image (white drive icon) by either clicking the little Eject icon to the right of the disk image in the Finders’ Sidebar, or Ctrl-Click the drive icon on the desktop and select “Eject” from the contextual menu. Now try backing up again or launching Time Machine to view previous backups.
*“Disconnect All Users…”:*
If your Time Machine backup drive (“Backup of Users Computer”) is mounted on your desktop or in the Sidebar of the Finder window. then Time Machine may think the drive is already in use. Alternatively, if the Time Capsule hard disk has been recently accessed by a Windows machine, it may not have fully relinquished control. Do the following:
Open Airport Utility and select the Time Capsule on the left.
Click “Manual Setup”.
Select “Disks” at top of window.
Click “Disconnect All Users…” at bottom of window.
Close the Airport Utility.
Now try Backing up again.
One poster reported: “I got it resolved. Apparently it had to do with one of the files being open on the disk from the drive. I had browsed the disk with one of my windows boxes here and it must have left one of the folders "open". Anyway, I rebooted the TC and we are good to go now.”
*Proper Computer Name* #
Make sure your computer has a proper name. Go to System Preferences --> Sharing. Time Machine needs to differentiate your computer from others on your network (i.e. "Bills MacBook" or "Office iMac"). If the "Computer Name" field is blank, create a name. Realize that if this step is necessary, you will likely have to start the Time Machine backup process over again and do another full initial backup.
According to this article, [http://support.apple.com/kb/TS1760], Time Machine may experience problems if your computer name includes certain characters. Make sure the computer name only includes ASCII characters from the following set.
(0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ)
Once a change in the computer name occurs, you should stop and restart Sharing on the affected computer. Uncheck and then recheck Sharing in the Services list on the left.
# Try removing the apostrophe from the disk images name (sparsebundle).
*A Stalled .inProgress Files:* #
It may be that the previous backup attempt was ungracefully interrupted leaving remains that Time Machine can’t deal with.
Stop any current backup attempt. Choose “Stop Backing Up” from the Time Machine menu.
Open the Time Machine Preferences and turn “OFF” Time Machine.
Open your Time Machine drive.
Open the folder labeled “Backups,backupdb”.
Now open the folder containing backups of the computer in question.
Are there any “.inProgress” files there. Delete them by dragging the file to the Trash. Or Ctrl-Click the file and select "Move to Trash" from the contextual menu. (Give this time as deleting a large file on an external disk can take a while.)
Turn Time Machine back “ON”. Now try backing up again.
NOTE: If the above procedure becomes impossible to perform, try accessing the disk image from another Mac. Some have discovered that attempting a repair from another computer succeeds where the original computer failed.
Let us know if any of the suggestions above helped to resolve your issue.
Cheers!

"Backup disk image could not be mounted"

I have been using time capsule successfully for about 5 months. But now it has suddenly started returning a time machine error "the backup disk image could not be mounted".
Anyone got any suggestions?

towersfamily,
*_"The Backup Disk Image Could Not Be Mounted" (Console - “Failed to mount disk image”)_*
First, it is important to distinguish this error message from another, similar Time Machine error that states “The backup volume could not be mounted”. This is important as the causes and cures for these two errors can be very different.
Consider each topic below separately. When one option does not resolve your issue, then move on the next one.
*Unmount the Backup Disk Image* (TC)
If, for some reason, you have manually mounted the Time Machine backup disk image (sparsebundle), or Time Machine failed to eject it after the previous backup, subsequent backups may fail. (Console - “Failed to mount disk image”… “Backup failed with error: 21”)
Eject the backup disk image (white drive icon) by either clicking the little Eject icon to the right of the disk image in the Finders’ Sidebar, or Ctrl-Click the drive icon on the desktop and select “Eject” from the contextual menu. Now try backing up again or launching Time Machine to view previous backups.
*“Disconnect All Users…”:*
If your Time Machine backup drive (“Backup of Users Computer”) is mounted on your desktop or in the Sidebar of the Finder window. then Time Machine may think the drive is already in use. Alternatively, if the Time Capsule hard disk has been recently accessed by a Windows machine, it may not have fully relinquished control. Do the following:
Open Airport Utility and select the Time Capsule on the left.
Click “Manual Setup”.
Select “Disks” at top of window.
Click “Disconnect All Users…” at bottom of window.
Close the Airport Utility.
Now try Backing up again.
One poster reported: “I got it resolved. Apparently it had to do with one of the files being open on the disk from the drive. I had browsed the disk with one of my windows boxes here and it must have left one of the folders "open". Anyway, I rebooted the TC and we are good to go now.”
*Proper Computer Name* #
Make sure your computer has a proper name. Go to System Preferences --> Sharing. Time Machine needs to differentiate your computer from others on your network (i.e. "Bills MacBook" or "Office iMac"). If the "Computer Name" field is blank, create a name. Realize that if this step is necessary, you will likely have to start the Time Machine backup process over again and do another full initial backup.
According to this article, [http://support.apple.com/kb/TS1760], Time Machine may experience problems if your computer name includes certain characters. Make sure the computer name only includes ASCII characters from the following set.
(0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ)
Once a change in the computer name occurs, you should stop and restart Sharing on the affected computer. Uncheck and then recheck Sharing in the Services list on the left.
Let us know if any of the suggestions above helped to resolve your issue.
Cheers!

Image file not visible in style library where it is situated but still visible in site

Hi all,
I'm a bit stumped by this one - there are a set of images that are part of my masterpage in my site, and they are "in" (according to the link/url) the "/style library\branding2010/images/..." folder, however when you GO to this folder,
these images are nowhere to be found... how is this possible?
Has this item been deployed incorrectly?
What is the correct way to (a) fix, (b) do this in future?
There is a "branding2010.wsp" file ON the server, there is also the "*.master page that refers to these "phantom" images appear fine even in SharePoint Designer, and while you CAN see them in the "Browse" for picture window
IN SharePoint Designer, you can't add edit or delete these things...
I don't know much about branding (or sharepoint really) but I'm "in charge" - I'm site collection admin, but I can't seem to "see it" using Sharepoint designer, Sharepoint "proper", or "View/Manage All Site Content".
Any help or guidance would be great!
UPDATE: Hmmm... in "All Files" (Sharepoint Designer) you CAN get to and manage these files... is this the recommended workflow?

Hi,
As you said that you can view the image files inside All Files in SharePoint Designer, so what is the image files’ location? Are they still inside the style library?
I suppose that the images may not be stored in the Style Library.
Please right click the file in SharePoint Designer and select Preview in Browser to check the URL of the images.
Per my knowledge, if the images are stored in the style library and you have permission to view or edit
the files, you can view or edit the files in the browser.
And you can also choose to edit the files in SharePoint Designer, both the two methods are supported.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Rotating images is not working

I encountered a somewhat strange behavior with iPhoto regarding image rotation. Whenever I import images into iPhoto I have the need to rotate some of them (landscape --> portrait). While it works for most of the images it does not for some of them. The preview pane shows the images with the proper orientation but if I switch to slideshow it will only show them in landscape mode. This is pretty annoying. Sometimes this can be corrected if I quit iPhoto after rotating these photos and before starting a slideshow. It does not matter whether I created a new album or not.
Any help solving this problem is greatly appreciated.

If the test library doesn't work either then it's either the application or something in your account. To check out the latter log into another user account on your Mac and try rotating there. If it doesn't work as it should it's an application issue and reinstallation is warranted. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
reinstall iPhoto from the disk it came on and apply the latest updaters.
It you can rotate correctly in the other account then there's something in your primary account that's the culprit. It could be a preference file other than iPhoto's that causing the problem. To check it out try the following:
Troubleshooting SL Prefs
Trouble Shooting Preferences in Leopard/Snow Leopard
1 - close all applications.
2 - open your Library folder, Home/Library, and drag the Preferences folder to the Desktop. A new Preference folder will be immediately created in the Library.
3 - run the application again and determine if the problems is fixed.
4 - If the problem is fixed:
A - open the working Preferences folder (HD/Users/your_name/Library/Preferences).
B - Open the Preferences folder on the Desktop, select all of the contents and drag them into the working Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace button.
Click to view full size
5 - If the problem is NOT fixed, drag the Preferencess folder on the Desktop into the Library to replace the new one that was created.
Oh, before doing anything try deleting the iPhoto cache file that's located in the User/Library/Caches/com.apple.iPhoto folder. Then try again. Forgot to suggest that earlier.

If image file not exist in image path crystal report not open and give me exception error problem

Hi guys my code below show pictures for all employees
code is working but i have proplem
if image not exist in path
crystal report not open and give me exception error image file not exist in path
although the employee no found in database but if image not exist in path when loop crystal report will not open
how to ignore image files not exist in path and open report this is actually what i need
my code below as following
DataTable dt = new DataTable();
string connString = "data source=192.168.1.105; initial catalog=hrdata;uid=sa; password=1234";
using (SqlConnection con = new SqlConnection(connString))
con.Open();
SqlCommand cmd = new SqlCommand("ViewEmployeeNoRall", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
da.Fill(dt);
foreach (DataRow dr in dt.Rows)
FileStream fs = null;
fs = new FileStream("\\\\192.168.1.105\\Personal Pictures\\" + dr[0] + ".jpg", FileMode.Open);
BinaryReader br = new BinaryReader(fs);
byte[] imgbyte = new byte[fs.Length + 1];
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dr["Image"] = imgbyte;
fs.Dispose();
ReportDocument objRpt = new Reports.CrystalReportData2();
objRpt.SetDataSource(dt);
crystalReportViewer1.ReportSource = objRpt;
crystalReportViewer1.Refresh();
and exception error as below

First: I created a New Column ("Image") in a datatable of the dataset and change the DataType to System.Byte()
Second : Drag And drop this image Filed Where I want.
private void LoadReport()
frmCheckWeigher rpt = new frmCheckWeigher();
CryRe_DailyBatch report = new CryRe_DailyBatch();
DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter ta = new CheckWeigherReportViewer.DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter();
DataSet1.DataTable_DailyBatch1DataTable table = ta.GetData(clsLogs.strStartDate_rpt, clsLogs.strBatchno_Rpt, clsLogs.cmdeviceid); // Data from Database
DataTable dt = GetImageRow(table, "Footer.Jpg");
report.SetDataSource(dt);
crv1.ReportSource = report;
crv1.Refresh();
By this Function I merge My Image data into dataTable
private DataTable GetImageRow(DataTable dt, string ImageName)
try
FileStream fs;
BinaryReader br;
if (File.Exists(AppDomain.CurrentDomain.BaseDirectory + ImageName))
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
else
// if photo does not exist show the nophoto.jpg file
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
// initialise the binary reader from file streamobject
br = new BinaryReader(fs);
// define the byte array of filelength
byte[] imgbyte = new byte[fs.Length + 1];
// read the bytes from the binary reader
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dt.Rows[0]["Image"] = imgbyte;
br.Close();
// close the binary reader
fs.Close();
// close the file stream
catch (Exception ex)
// error handling
MessageBox.Show("Missing " + ImageName + "or nophoto.jpg in application folder");
return dt;
// Return Datatable After Image Row Insertion
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

I am trying to import developed images from LightRoom 5 in o Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.

Have you tried restoring the Preferences yet?

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

Please don't post the same question multiple times!

Hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem

hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
thanks for any reply.
Rosone

It is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
Check this in a different browser or access site in a differ OS.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

Image Overlapping not proper

Similar Messages

Maybe you are looking for