Table Maintainence generator Error Special Character '_' in generic key

Hello,
I have created a Table which contain 6 fields. All the fields of the table are primary key. The combined length of all the primary key is 163 characters. In the activation Log of the table we have a warning message which states "Key length > 120 (Restricted functionality)". Initially we are able maintain the entries using SM30. BUt now when we are making the entreis in the table an error message comes. The error is Special character "_" in generic key.and we are not able to save the entries.
I have deleted the table maintainence generator and have regenerated it. But the same error is coming.
Please provide your suggestion.
Thanks,
Mohit

Please provide your suggestions
Thanks,
Mohit

Similar Messages

Error wirh release of the requets Special character "_" in generic key

Hello
I am trying to release the request, this reques was generated to installation the baseline for Peru but I got this message:
Key messages: TABU TFAWC 200SAPLCATS 2100TCA
Special character "_" in generic key
Special character "_" in generic key
Message no. TK287
Diagnosis
The generic key 200SAPLCATS 2100TCA was entered for the object TFAWC. All keys that match up to the asterisk are to be transported.
The key cannot have any special characters before the asterisk, since they are interpreted in different ways by different database systems.
The key contains the special character _.
System Response
The entry is rejected.
Procedure
Extend the generic entry, or specify all keys individually
Any sugstion for this message?
thanks
Danny

Hi Danny,
Could you resolve issue Message no. TK078, I'm config SD and when i assign division and dis.channel to sales org those action does not show error but when i check request consistensy in se03 i have below error.
=====================================================
Object TDAT OVXA has object function "K", but no key
Message no. TK078
Diagnosis
The request/task cannot be saved because an object entry with function K
    does not have a key.
System Response
The system did not save the entry.
The cursor appears on the incorrect entry in the editor.
Procedure
Press Enter once. This branches to the object list in the editor and
    positions the cursor on the incorrect object entry.
Correct the object function or enter keys for the object entry.
============================================
I had follow procedure but it do nothing.
Anybody can help Pls !
Thanks and Best regards.

Error while releasing transport request - Special character "_" in generic

Hi all,
we're receiving the error Special character "_" in generic key when releasing a best practice transport.
Note 1304725 describes my error, but the solution cannot be implemented. The reason for this is that we do not have an individual entry for eacht yb_PS,..,
but we have only one entry where field BWERT has a wildcard '*' as entry.
Does anyone has some idea how to solve this ?
kind regards !

Hello Bjorn,
How did you get this solved?
I'm having nearly the same issue:
A custom-table with a total key lenght of about 365 characters. As soon as I enter a special character (_) in the key field just before the position 120, the message tk287 rejects the entry. Entering the special character in a key field at about key position
60, there's no message rejecting the entry.
Regards

Error while creating table maintainence generator !

Hi All ,
I want to create a table maintainence generator for table ZZFTLPNT . However I am getting the following error :
Typ Message text                                                           LTxt
    Field ZZZFTLPNT-RRCTY shortened (new visible length: 000015)
    Field ZZZFTLPNT-DRCRK shortened (new visible length: 000015)
    Field ZZZFTLPNT-ROBJNR shortened (new visible length: 000009)
    Field ZZZFTLPNT-SOBJNR shortened (new visible length: 000009)
    Field ZZZFTLPNT-RRCTY shortened (new visible length: 000007)
    Field ZZZFTLPNT-DRCRK shortened (new visible length: 000007)
    Field ZZZFTLPNT-ROBJNR shortened (new visible length: 000004)
    Field ZZZFTLPNT-SOBJNR shortened (new visible length: 000004)
    Field ZZZFTLPNT-RRCTY shortened (new visible length: 000003)
    Screen SAPLZZZFTLPNT                           0001 could not be gene
    Memory for screen LOAD   is used up. bytes) is not
Please advise .

Hi Pankaj
it is "Display/Maintenace allowed" and delivery class is 'A' .
Edited by: Ambar Patil on Dec 9, 2008 11:59 AM
Edited by: Ambar Patil on Dec 9, 2008 12:01 PM

Table Maintenance Generator Error

Friends,
I am encountering errors in Table Maintenance Generator for a ztable.
I am getting the error message "Memory for screen LOAD is used up.bytes) is not"
Message no.XI166
Please let me know what is missing.
Thanks and Regards.

Hi,
Try to create the table maintainence generator again. This is the maximum time approach to deal with table maintainence generator .
Regards.

Creation of Table Maintainence Generator for Standard table

Hi,
I need to create a table maintainence generator for a standard SAP table.
The end user need have to delete certain entries from the table.
Is it viable to go for a table maintaninence generator or go for program which will delete the entry from the standard SAP table.
Which is the best method to go.
Thanks in Advance,
Irfan Hussain

Hi,
But i think there is a differtent procedure to create a table maintainenece generator for the standard SAP tables than normal Ztables.
I thinl we need to take access key and do the modification.
Thanks in Advance,
Irfan Hussain

Validate the records in table maintainence generator

hi to all experts,
this is raj.............
i have query to ask to all experts...
"i have to validate the records or entries before populating
into the table using table maintainence generator"
can anybody help out in this...
regards,
raj
Edited by: Julius Bussche on Oct 24, 2008 11:52 AM

hi...
write u r code in the screen number spicefied ...in PAI
MODULE CHECK_BEFORE_INSERT ON CHAIN-REQUEST.
in this module u can write code for validation
thanks
sam

Table maintainence generator

what is the need of table maintanace generator? is it reqired maintain for every table.? plz give me detaailed explanation on this??

Hello Pavan,
Table Maintenance is used to maintain the values of a custom table.It is not required for all the tables.It is required only in those tables where you give the option to the end user to maintain the table data.Based on your requirements,you may want to change or add/delete the contents of your table.The procedure for table maintenance is:
1)Go to se11 and type the table name in Display or change mode.
2)Using the menu path Utilities -> Table Maintenance Generator .Table maintenance is generated.
3)To be able to maintain your table using a transaction(using a transaction for table maintenance dialog),you need to do the following.
Create a new transaction of the type Parameter Transaction from SE93, specifying SM31 as the transaction.
The VIEWNAME parameter is set to your table name with the option Skip initial Screen set.
The UPDATE parameter is set to value X.
Check this blog:
<b>/people/sudheer.cheedella/blog/2006/02/20/extracting-data-in-table-maintenance
http://help.sap.com//saphelp_470/helpdata/EN/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm
Importance of table maintenance
Regards,
Beejal
**Reward all helpful answers

Generate XML - Special Character in data causing error

Hello,
I have a procedure written using DBMS_XMLGEN to create xml output. A problem that I am running into is some of my data has an eacute in it. How can I code the XML to account for this and any other weird characters that may exist?
(ie - i need to be able to specify the encoding part of ?xml version=1.0 encoding=ISO-8859-1?)
Here is an excerpt of what i have so far...the results are fine until I run to include the data with the eacute. Then nothing is generated at all. I tried .convert, but I don't know if that's what I need, or if I am calling it correctly.
Thanks!
Janel
ctx := dbms_xmlgen.newContext(rc_data);
-- set name of root element --
dbms_xmlgen.setRowsetTag(ctx, 'XXFA10022');
-- set name of element separating all rows --
-- default is ROW --
dbms_xmlgen.setRowTag(ctx, 'G_DATA');
-- generate XML document --
xml := dbms_xmlgen.getXml(Ctx);
xml := dbms_xmlgen.convert(xml, dbms_xmlgen.ENTITY_ENCODE);
i := dbms_xmlgen.getNumRowsProcessed(ctx);
dbms_xmlgen.closeContext(Ctx);
apps.fnd_file.put_line(apps.fnd_file.log, 'rows processed -' || i);
apps.fnd_file.put_line(apps.fnd_file.log, 'close');
apps.fnd_file.put_line(apps.fnd_file.log, xml);
apps.fnd_file.put_line(apps.fnd_file.output, xml);
-- free clob content --
dbms_lob.freetemporary(xml);

No. There are no XML components that will clean up malformed XML. Your options are to go to whoever sent you that document and tell them that their XML is malformed and that in future they should not do that, or to write your own component to clean up the malformed XML. Since that would involve more work than writing a full XML parser, I don't recommend the second option.

External Table, Handling Delimited and Special Character in file

Hi ,
I have created one external table with these option
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY ***************************************
ACCESS PARAMETERS
( RECORDS DELIMITED BY NEWLINE
SKIP 0
FIELDS TERMINATED BY '|'
OPTIONALLY ENCLOSED BY '"'
MISSING FIELD VALUES ARE NULL
LOCATION
( 'test_feed.csv'
Now problem is these are coming as valid.
anupam|anupam2
anupam"test|anupam"test2
"anupam|test3"|test3
anupam""""test5|test5
anupam"|test7
but these are not coming as valid
"anupam"test4"|test4    --> Case when we have quotes in the filed but still have quotes in it. I guess in this case we can send the filed expect closing double quotes.
"anupam|test6   --> In case field is starting with double quotes then it's failing
"anupam"test8|test8"|test8 --> In case one filed contains both pipe ( |) and double quotes then we are sending it enclosed in double quotes. But thats failing the job.
Can you suggest what is the best way to handle such scenario? ( One restriction though. The file is used by other system - Netezza as well, which can't take more than one character long delimited :'( )

One approach is to define the external table a ONE column table (with single field on the file). This way each line will come in as a row in the external table. Of course you have to build "parsing logic" on top of that.
DROP TABLE xtern_table;
CREATE TABLE xtern_table
    c1 VARCHAR2(4000)
organization external
    type ORACLE_LOADER DEFAULT directory xtern_data_dir
    ACCESS PARAMETERS (
        RECORDS DELIMITED BY NEWLINE
        FIELDS TERMINATED BY '~'   ---- <<<<<<<< Use a field terminator as a character that is not found in the file
        MISSING FIELD VALUES ARE NULL
        ( c1 CHAR(4000)
     ) location ('mycsv.csv')
> desc xtern_table
desc xtern_table
Name Null Type
C1        VARCHAR2(4000)
> column c1 format A40
> select * from xtern_table
C1
anupam|anupam2
anupam"test|anupam"test2
"anupam|test3"|test3
anupam""""test5|test5
anupam"|test7
"anupam"test4"|test4
"anupam|test6
"anupam"test8|test8"|test8
8 rows selected
Ideally, it will be good t have an incoming source file with predictable format.
Hope this helps.

How to disable the special character input by Option key?

Hi, all!
I'm a eclipse developer and I'm get used to type (alt + /) shortcut for code tip in eclipse, but in Mac, when I type (option + /), I got ÷ symbol, how can I disable this functionality in Mac?
Many thankS

On the U.S., U.S. Extended, and U.S. International PC keyboards, the option key turns the / character into ÷.
In the System Preferences > Keyboard Preferences > Keyboard Tab > Modifier Keys... you can actually set the option key modifier to No Action. It does what it says and option + / is exactly what you get.

Special Character (accent) hold down key

I am running OS X 10.8.2 but I cannot pull up special characters (accent marks) by holding down a key as shown here http://support.apple.com/kb/PH11264. How do I turn this feature on?

Holding down the e key when you are in TextEdit and using the US keyboard layout does not produce a popup menu like this?

Error "TK287" when releasing a request - Special character "_" is invalid.

I have some tables in Solution Manager and having some warnings:
Table: CRM_SVY_DB_ST
Field value:CRM_SVY_GENERATE_BSP_TEMPLATE.XSLT
Field: TRANSFORMATIONID
It doesn´t accept the special character "_"
Below the error when releasing and the explanation of the error in the sequence.
Key messages: TABU CRM_SVY_DB_ST 300DSWPCI_ISSUE_FDBCK 0000000000DCRM_
Special character "_" in generic key
Key messages: TABU CRM_SVY_DB_ST 300DSWPCI_ISSUE_FDBCK 0000000000DCRM_
Special character "_" in generic key
Key messages: TABU CRM_SVY_DB_ST 300DSWPCI_ISSUE_FDBCK 0000000000DCRM_
Special character "_" in generic key
Key messages: TABU CRM_SVY_DB_ST 300DSWPCI_SERVICE_FDBCK 0000000000DCRM_
Special character "_" in generic key
Key messages: TABU CRM_SVY_DB_ST 300DSWPCI_SERVICE_FDBCK 0000000000DCRM_
Special character "_" in generic key
Explanation of the error:
Special character "_" in generic key
Message no. TK287
Diagnosis
The generic key 300DSWPCI_ISSUE_FDBCK 0000000000DCRM_ was entered for the object CRM_SVY_DB_ST. All keys that match up to the asterisk are to be transported.
The key cannot have any special characters before the asterisk, since they are interpreted in different ways by different database systems.
The key contains the special character _.
System Response
The entry is rejected.
Procedure
Extend the generic entry, or specify all keys individually.

Hi,
Go through SAP note 711103 & 688363.
Regards,
Sachin Rane.
Edited by: Sachin Rane on Mar 12, 2009 2:48 PM

Error while creating table maintenance generator

Hi,
I am getting below error while creating table maintenance generator.
Screen SAPLZtest 0002 could not be generated. In DYNPFIELD_ATTR field LENGTH has the invalid value 241.
Reason for that error might be:
In the table I have a field with a dataelement(customized) of type Char and length 241.
But in the other table Iam using the standard data element(standard) of same type(241 char).In this table Iam able to create table maintenance generator without any errors.
And the domain Iam using is same for both the tables.
Please help me to solve this.
Thanks in advance,
Sravanthi

Hi,
you can go to transaction se51 and go your screen. active it.. you can find thesolution.
refer these links..
Error in table control
Error while creating table maintainence generator !
Thanks and Regards,
Ahamed.

Mapping maintainence generated table to SPRO

Hi Guys,
I have created a Z table and checked the table maintainence generator box for it. I have done this so that user can easily edit the table contents.
Now I want to map this maintainence generated table to my SPRO.
How do I do it ?
Its very urgent
Regards,
Tushar.

This will probably get you started.
http://help.sap.com/saphelp_erp2005/helpdata/en/ba/b6b237b9a9a968e10000009b38f8cf/frameset.htm
Regards,
Rich Heilman

Table Maintainence generator Error Special Character '_' in generic key

Similar Messages

Maybe you are looking for