Images after upgrade from 10g to 11g

We recently upgraded from 10g to 11g and all the images are broke in the dashboard.
Can anyone provide the steps needs to be done in order to fix the broken images?
Thanks.

Put image files at
Drive:\Oracle\Middleware\Oracle_BI1\bifoundation\web\app\res\s_blafp\images
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\s_blafp\images
If required
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp\.appmergegen_1291264099332\analytics.ear\ukjjdc\res\s_blafp\images
Call them using fmap
Syntax: fmap:images/imagename.imageformat
for e.g: fmap:images/geograph.jpg
Pls mark correct/helpful if helps

Similar Messages

  • ODI Procedures not working after upgrading from 10G to 11G

    Hello Gurus,
    We have run into a scenario where the procedures in ODI are not working after we upgraded it from 10G to 11G (11.1.1.6). However we can make it to run if we create the procedure from scratch.
    Also we are having issues related to packages where in the packages were running before we applied the patch 11.1.1.6.3. And after applying the patches they are not running.
    Any help will be appreciated.
    Thanks

    If you want someone to help you, please be elaborate in the exact errors you are getting.
    A general statement would do nothing but guess work.
    What is the error that you get while executing the procedure.
    What are the exact issues that you get while executing packages ?

  • Report Navigation Issue after upgrading from 10g to 11g

    Hi Experts
    I have recently upgarded my solution from 10g to 11g. Issue is when I click on column value for navigation it doen't navigate the display remains unchanged
    1) I have created new dashboard and placed this report in new dashboard the navigation works fine.
    2) I have created new report and placed that report in old dashboard it doesn't work
    why is it so I undertand that there is problem with Dashboard and not with report but I am unable to figure it out
    what can be the problem? any suggestions
    Thanks
    Sameer

    Hi Experts
    I have recently upgarded my solution from 10g to 11g. Issue is when I click on column value for navigation it doen't navigate the display remains unchanged
    1) I have created new dashboard and placed this report in new dashboard the navigation works fine.
    2) I have created new report and placed that report in old dashboard it doesn't work
    why is it so I undertand that there is problem with Dashboard and not with report but I am unable to figure it out
    what can be the problem? any suggestions
    Thanks
    Sameer

  • Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

    Hi Deepak/Folks,
    Another question that I have is that while doing the Oracle Upgrade on an EP server, the patches were not installed properly and I had to shut down the Patches installation after it did not do anything for a while.
    Now when I try to install the patches it fails telling me that the Installed patches cannot be verified, I had written to SAP and they told me to follow the
    SAP note 1862446 - Inventory
    load failed... OPatch cannot load inventory for the given Oracle Home
    and re-create the oracle  inventory.
    This has also not helped in anyway.
    Is there a solution to this problem.
    Following is the error that I am getting when I try to Install the patches
    Getting pre-run patch inventory...
    Getting pre-run patch inventory...failed.
    Cannot get pre-run patch inventory.
    Refer to log file
      $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-14-52-51.log
    when I open the log file specified here I get the following
    more mopatch-2014_08_06-14-52-51.log
    more /oracle/<SID>/11203/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
    MOPatch - Install Multiple Oracle Patches in One Run - 2.1.15.
    Copyright (c) 2007, 2013, Oracle and/or its affiliates. All rights reserved.
    Version:       2.1.15
    Revision:      5.1.2.26
    Command-line:  /oracle/<SID>/11203/MOPatch/mopatch.sh -v -s SAP11203P_1312-20009978.zip
    Oracle Home:   /oracle/<SID>/11203
    RDBMS version: 11.2.0.3.0
    OPatch version:11.2.0.3.3
    Clean-up:      supported
    PSUs:          supported
    Log file:      $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
    Patch base:    .
    Patch source:  SAP11203P_1312-20009978.zip
    Link script:   ./link.mts<SID>ua.sh
    Readmes:       <none>
    Strpd. Readmes:<none>
    make utility:  /usr/ccs/bin/make
    unzip utility: /oracle/<SID>/11203/bin/unzip
    User name:     ora<SID>
    Working dir:   /oracle/stage
    System:        HP-UX mts<SID>ua B.11.31 U ia64 2468369872 unlimited-user license
    Disk free:     11734549 KBytes on /oracle/<SID>
    Disk required: 886496 KBytes on /oracle/<SID>
    Getting pre-run patch inventory...
    executing: "/oracle/<SID>/11203/OPatch/opatch" lsinventory -retry 0 -xml "./mopatch-187-21696-tmpdir/preinv.xml"
    ========================================================
    GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
    ========================================================
    Oracle Interim Patch Installer version 11.2.0.3.3
    Copyright (c) 2012, Oracle Corporation.  All rights reserved.
    Oracle Home       : /oracle/<SID>/11203
    Central Inventory : /oracle/<SID>/oraInventory
       from           : /oracle/<SID>/11203/oraInst.loc
    OPatch version    : 11.2.0.3.3
    OUI version       : 11.2.0.3.0
    Log file location : /oracle/<SID>/11203/cfgtoollogs/opatch/opatch2014-08-06_15-01-56PM_1.log
    List of Homes on this system:
    Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
    Possible causes are:
       Oracle Home dir. path does not exist in Central Inventory
       Oracle Home is a symbolic link
       Oracle Home inventory is corrupted
    LsInventorySession failed: OracleHomeInventory gets null oracleHomeInfo
    OPatch failed with error code 73
    Getting pre-run patch inventory...failed.
    Cannot get pre-run patch inventory.  Exiting.
    I would appreciate if you folks can help me out on this
    Thanks
    APS

    FOLLOW UP QUESTION BRANCHED:
    Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

  • After Upgrade OBI 10g to 11g:Odbc driver returned an error - SQLExecDirectW

    Hi all,
    for an OBI upgrade from 10g to 11g I used a RPD and Webcatalog based on a remote machine other than my local machine. Firstable I am making the tests on a Linux Virtual machine, which uses the Sample Lite version from Oracle.
    I made the following steps:
    1. I upgraded the RPD and Webcatalog. It worked without any errors.
    2. I set the static variable BI_EE_HOME via Administration Tool to the path in the Linux machine.
    --> Here I am not sure if the set path is correct. It begins with: \bi\ ...\instances\...\coreapplication_obis1 (... : I can't mention here the whole path name).
    --> When the OBI Server is installed in Windows, the mentioned static variable points to something like 'C:\<install folder>\...\coreapplication_obis1'
    --> Question: is the begin of my set path correct?. I set that pointing to the Linux OBI Server, because the OBI Server is installed on Linux.
    Problem:
    After login as the user in RPD: Administrator/<Password for my upgraded RPD> I can see the links in the Catalog and the Dashboards links. But I can not see any values, any Reports when going through the links.
    For example when trying to see a Dashboard with date 12.02.2011it happens:
    Odbc driver returned an error (SQLExecDirectW).
    Status: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] general error.
    [nQSError: 43113] Message returned from OBIS.
    [nQSError: 43119] Query Failed:
    [nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified
    at OCI call OCIServerAttach.
    [nQSError: 17014] Could not connect to Oracle database. (HY000)
    SQL Issued: SELECT "Dimension_-_My Dimension"."MyDimension" saw_0 FROM "Accounting (ACC)" WHERE "Dimension_-_My Dimension"."MyDimension" LIKE 'J%' ORDER BY saw_0
    I think its not retrieving the data from the remote database, because I don't have the data of the remote database in my local. I think the OBI Server still is pointing to the local virtual machine Oracle database.
    Can anybody tell me what happens here and how can I solve this problem?.
    I would appreciate any help....

    Hi gerardnico,
    I've tried many things and did as in your articles, but I don't have success with that.
    These are the things I did:
    1. I searched for the file tnsnames.ora in my Linux virtual machine. I could find it in many paths:
    /.../Oracle_BI1/network/admin/samples/tnsnames.ora
    /.../oracle/xe/app/oracle/product/10.2.0/server/hs/admin/tnsnames.ora.sample
    /.../oracle/xe/app/oracle/product/10.2.0/server/network/admin/tnsnames.ora
    /.../oracle/xe/app/oracle/product/10.2.0/server/network/admin/samples/tnsnames.ora
    /.../oracle/xe/app/oracle/product/10.2.0/server/network/admin/temp/tnsnames.ora
    /.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin
    in the last path I found the listener.ora as well.
    2. I took the tnsnames.ora from the last path, because the ORACLE_HOME points to /.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server
    3. I edited the tnsnames.ora this way:
    # tnsnames.ora Network Configuration File:
    XE =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = host_of_the_remote_machine)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = database_name_of_the_remote_machine)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
    (SID = database_SID_of_the_remote_machine)
    (PRESENTATION = RO)
    4. I made a backup of the tnsnames.ora in path /.../Oracle_BI1/network/admin/samples/tnsnames.ora
    and copied the tnsnames.ora from /.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin to the Oracle_BI1 path
    5. I set the TNS_ADMIN to /.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin
    6. I restarted the BI Server
    No success in what I did. The error is still there.
    7. I've tried also: sqlplus database_user_remote_machine/database_password_remote_machine@database_SID_remote_machine
    I didn't get the connection:
    SQL*Plus: Release 10.2.0.1.0 - Production on Thu Jun 16 04:36:10 2011
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    ERROR:
    ORA-12154: TNS:could not resolve the connect identifier specified
    Enter user-name: database_user_remote_machine
    Enter password:
    ERROR:
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux Error: 2: No such file or directory
    What am I doing wrong here?. I am still thinking that I need the import of the database.
    Additional SID=Service-Name=Database-name in the remote machine.

  • After Migrating from 10g to 11g Geeting problems with Guided navigations.

    After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
    And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
    In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
    We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
    do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

    Hi Both,
    Thanks for the reply ...
    For Guided navigation we are getting like below error:
    Odbc driver returned an error (SQLExecDirectW).
    For Conditional dashboard section we are getting like below error:
    "saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

  • NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g

    NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
    then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
    But after applying the above the above patch we are still getting the same error.
    but in the above patch instructions file - Post deployment instructions to create the Variable
    Post Install Instructions:
    - To revert to the 10g navigator behavior for handling conforming dimensions,
    you must set the following session variable via an init block in the RPD:
    NO_FORCE_TO_DETAIL_BIN=1
    The default value for the above variable is 0.
    - Restart all servers (Admin Server and all Managed Server(s))
    but we didn’t find the process to create the specified variable and Initialization block in the RPD
    Can you please suggest us how to go further.
    Our questions are:

    Hi
    Refer the below thread.
    obiee 11g non-conforming dimensions and nQSError 14025
    Might be help you/
    Thanks,
    satya

  • Check list for upgrading from 10g to 11g when there is a schema replication

    Hi
    We are looking to upgrade one of our production database from 10g to 11g
    Currently this database has one schema that is replicated to 2 other databases using Oracle streams.
    The replication is excluing DDLs and excluding several other application tables.
    What should I do pre and post the upgrade ?
    should we remove the stream configuration all together and rebuild it after the upgrade ?
    I was hoping that we can first upgrade the two target databases to 11g and then the source database, without impacting our streams configuration at all
    Is that possible ?
    Is there any documentation on the subject ?
    thanks in advance
    Orna

    Pl post the OS versions of the source and target servers, along with exact (4-digit) versions of "10g" and "11g". I do not have any experience with streams, but the 11gR2 Upgrade Doc suggests that you upgrade the downstream target databases first before upgrading the source - http://download.oracle.com/docs/cd/E11882_01/server.112/e10819/upgrade.htm#CIAFJJFC
    HTH
    Srini

  • .Database upgrade from 10g to 11g in Oracle EBS 11i

    Hi,
    An urgent help is needed.I am upgrading Oracle Database from 10g to 11g.My EBS is version 11i.So after upgrading my database
    from 10g to 11g as sa sanity check what are the parameters we need to take care of the EBS.My point is will there be any Application level changes if the database
    is upgraded?Wiill the Workflow and what other things we had to do the sanity check if its working properly?Any Concurent Program level changes be affected?
    Thanks and Regards
    Edited by: 918308 on May 10, 2013 7:52 PM

    918308 wrote:
    Hi,
    Thanks for the info provided but i dont have the metalink id.Kindly can you provide me the link for the subjected docs so that i can relate.Any application level testing to be done?Concurrent Programs,Schedule Manager,Workflow etc.?We cannot post the contents of MOS docs since this violates Oracle support agreement policy.
    You need to go a regular sanity check (i.e. submit concurrent programs, check workflow functionality, ..etc) -- E-Business Suite Diagnostics 11i Test Catalog [ID 179661.1]
    Thanks,
    Hussein

  • Table getting clipped after migrating from 10g to 11g

    Hi We migrated our application from 10g to 11g, our application got converted to a trinidad application, skin details are follows:
    trinidad skins.xml:
    <skins xmlns="http://myfaces.apache.org/trinidad/skin">
    <skin>
    <id>
    suede.desktop
    </id>
    <family>
    suede
    </family>
    <render-kit-id>
    org.apache.myfaces.trinidad.desktop
    </render-kit-id>
    <style-sheet-name>
    skins/suede/suede.css
    </style-sheet-name>
    </skin>
    </skins>
    Trinidad Config.xml:
    <?xml version="1.0" encoding="windows-1252"?>
    <trinidad-config xmlns="http://myfaces.apache.org/trinidad/config">
    <skin-family>
    suede
    </skin-family>
    </trinidad-config>
    The problem is when the page loads, the table in the page is shown in a small box (please check the image: http://files.oraclecorp.com/content/AllPublic/Users/Users-J/jaya.battaramvenkatanaga-Public/anonymous/tableclipped.JPG), I am not sure if this is skin problem or layout problem. Please let me know if there is any correction in skin details given above, other wise if lay out is the problem, please provide any documents regarding trinidad layouts.
    Edited by: user9976446 on Mar 1, 2011 5:11 AM
    Edited by: user9976446 on Mar 1, 2011 5:19 AM
    Edited by: user9976446 on Mar 1, 2011 5:20 AM

    Hi Jaya,
    I think it's a layout problem, the table component or the outer component around the table is set to some default width value (300px?). Try setting the width explicitly to something larger, or see if you can use a stretchable layout component around the table.
    If you post the code from your page here we might be able to say more.
    For reference:
    Trinidad tag library http://myfaces.apache.org/trinidad/trinidad-api/tagdoc.html
    A useful migration guide from 10g to Trinidad http://wiki.apache.org/myfaces/from_ADF_to_Trinidad

  • Forms HOST command no longer works after database upgrade from 10g to 11g

    Hi,
    After upgrading the database 10g to 11g the forms HOST command no longer works on Unix server. The form used to work fine prior the upgrade. I read all the threads I could find and did not see any solutions. Adding PATH and LD_LIBRARY_PATH does not work because it does not even run a basic shell script. (I saw this solution, adding PATH and LD_LIBRARY_PATH, in many questions / threads).
    1. I wouldn't expect the database upgrade to be an issue, but it is the only change we had.
    2. Note, 11g is Oracle Fusion Middleware which is quite a bit different than 10g.
    I even tried the most basic commands like "echo" which is a build-in Unix command and there is no directory for it (ie. no /usr/bin - so variable PATH is irrelvent). i.e HOST('echo hi'); and HOST('echo "hi" '); and even HOST ('echo hi > /my_file.txt'); all returns FORMS_FAILURE (actually the if is IF FORM_SUCCESS THEN ... else ... and the else part always runs now - whereas it didn't before.).
    Or basic commands like /usr/bin/ls as in HOST(/usr/bin/ls). At that point I was just testing the Unix command would return FORM_SUCCESS even though I could not see the results (because they weren't writing to a log file). Notice that I'm using the direct path /usr/bin so no Unix environment variables were needed.
    The form does use webutil but that part works. For example, we have webutil_file_transfer( ....) The file shows up on the application server and in the expected directory.
    Here's the main goal. Upload a file from clients local PC to the datebase server. The form uploads the file to the Application server, then we have a Unix script to scp (secure copy) the file from the application server to the database server. IF webutil, or any other Oracle functions could put the file on the database server that would be better. But, I don't know of any procedures that do that - or would have done it cleanly (i.e. storing to database and write back to server and then using a blob etc. )
    Anyway, I was hoping someone would help with either of these.
    1) Get the HOST command to work. - If we can get that to work then I wouldn't need any more help. We can just call the already existing Unix script to copy the file from the application server to the database.
    2) OR be able to upload directly to the database server - wanted to do that originally
    Any help would be appreciated

    Solution for those interested and for anyone else searching this forum for a solution
    I found this on My Oracle Support:
    <h3>Host Command from Forms Not Working in 11g in Sun Solaris Sparc OS [ID 1157346.1]</h3>
    Applies To: Oracle Forms - Version 11.1.1.1.0 and later
    Sun SPARC Sun OS
    Symptoms:
    When trying to execute a Shell script or any OS command using the host() Built-in from Forms 11g, the host()command is not getting executed. The same functionality works on other operating systems and in previous versions like 10gR2.
    Steps to be followed:
    1) Take a backup and edit the $DOMAIN_HOME/config/fmwconfig/servers/WLS_FORMS/applications/formsapp_11.1.1/config/default.env or any custom environment file.
    2) Locate the following environment variable:
    LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
    3) Comment out this variable. After the changes, it will look like the following:
    #LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
    3) a) Instead of LD_PRELOAD, kindly use LD_PRELOAD_64 as given below :
    LD_PRELOAD_64=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
    (This makes HOST AND RUN_REPORT_OBJECT work fine).
    4) Save the file and execute your forms. The Host() built-in will work as expected
    The LD_PRELOAD setting in default.env is only required for the working of signal chaining facility in JVM version 1.5 and later. If you are not using theSignal chaining facility, this variable is not required. For more information, refer to the following documentation
    http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14772/forms.htm#CJAJGAFF

  • UPgrade from 10g to 11g

    Dear All,
    I am using 10.2.0.1 database and planning to upgrade to 11.1.0.6 and while executing the utlu102i.sql I found the database is using the old timezone.
    SQL> select * from v$timezone_file;
    FILENAME VERSION
    timezlrg.dat 2
    The issue is there is no patch available for the timezone upgrade for the windows platform in metalink.
    Questions?
    1. How can I upgrade the Time zone version before upgrading the database to 11g, if there is no patch available.
    2. It is mandatory to upgrade the timezone or 11g will automatically upgrade it.
    3. If I will go for the database upgrade without updating the timezone, will update fail.
    4. Do I have to upgrade the timezone to the current database (10.2.0.1) and then install the 11g binaries and start the upgrade or install the 11g binary first and apply the patch on 11g and then start the database upgrade.
    Below is the some part of the output of utlu102i.sql
    Miscellaneous Warnings
    WARNING: --> Database is using an old timezone file version.
    .... Patch the 10.2.0.1.0 database to timezone file version 4
    .... BEFORE upgrading the database. Re-run utlu111i.sql after
    .... patching the database to record the new timezone file version.
    WARNING: --> Database contains stale optimizer statistics.
    .... Refer to the 11g Upgrade Guide for instructions to update
    .... statistics prior to upgrading the database.
    .... Component Schemas with stale statistics:
    .... SYS
    .... OLAPSYS
    .... SYSMAN
    .... CTXSYS
    .... XDB
    WARNING: --> Database contains schemas with objects dependent on network
    packages.
    .... Refer to the 11g Upgrade Guide for instructions to configure Network ACLs.
    .... USER SYSMAN has dependent objects.
    WARNING: --> EM Database Control Repository exists in the database.
    .... Direct downgrade of EM Database Control is not supported. Refer to the
    .... 11g Upgrade Guide for instructions to save the EM data prior to upgrade.
    Eagarly waiting for your response.
    Thanks in advance.

    1. How can I upgrade the Time zone version before upgrading the database to 11g, if there is no patch available.
    See Metalink Document How To Apply The V4 DST Patches To Windows Clients or Servers [ID 417893.1], this should help you here.
    2. It is mandatory to upgrade the timezone or 11g will automatically upgrade it.
    You will need to update the Timezone to V4 prior to attempting an upgrade
    3. If I will go for the database upgrade without updating the timezone, will update fail.
    Yes that upgrade will not work without first updating the timezone for the 10.2.0.1 database you have
    4. Do I have to upgrade the timezone to the current database (10.2.0.1) and then install the 11g binaries and start the upgrade or install the 11g binary first and apply the patch on 11g and then start the database upgrade.
    The binary installations can be handled separately, however no upgrade operations can happen until the DST v4 is taken care of for the upgrade.
    Edited by: mrmessin on Dec 31, 2009 1:41 AM

  • Unable to parse WSDL of partnerlink after migrating from 10g to 11g

    Hi,
    My service is an Sync BPEL process calling a customised WSDL with the partnerlink. I migrated the working code of 10g to 11g. But compiling below is the error i am getting while trying to parse the WSDL of the partnerlink after migration.
    ==========================================
    java.lang.RuntimeException: oracle.tip.tools.ide.pm.modules.sca.util.SCAException: SCA_COMPONENT_NAME_NOT_DEFINEDProcessInteraction_v1
         at oracle.tip.tools.ide.pm.modules.sca.ide.JDevScaProcessListener.modelChanged(JDevScaProcessListener.java:78)
         at oracle.tip.tools.ide.common.bpelparser.implementations.xmlef.ProcessImpl.fireModelChanged(ProcessImpl.java:130)
         at oracle.tip.tools.ide.pm.bpelgraph.editors.partnerlink.PartnerLinkEditPage.firePartnerLinkCreated(PartnerLinkEditPage.java:1426)
         at oracle.tip.tools.ide.pm.bpelgraph.editors.partnerlink.PartnerLinkEditPage.saveToModel(PartnerLinkEditPage.java:360)
         at oracle.tip.tools.ide.pm.bpelgraph.editors.partnerlink.PartnerLinkEditPage.saveChanges(PartnerLinkEditPage.java:224)
         at oracle.tip.tools.ide.pm.bpelgraph.views.nodeeditors.AbstractActivityNodeEditor$PanelManager.saveChanges(AbstractActivityNodeEditor.java:224)
         at oracle.tip.tools.ide.pm.bpelgraph.views.nodeeditors.ApplyCancelPanel.handleOK(ApplyCancelPanel.java:268)
         at oracle.tip.tools.ide.pm.bpelgraph.views.nodeeditors.ApplyCancelPanel.actionPerformed(ApplyCancelPanel.java:339)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
         at java.awt.Component.processMouseEvent(Component.java:6263)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
         at java.awt.Component.processEvent(Component.java:6028)
         at java.awt.Container.processEvent(Container.java:2041)
         at java.awt.Component.dispatchEventImpl(Component.java:4630)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2475)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
         at java.awt.Dialog$1.run(Dialog.java:1045)
         at java.awt.Dialog$3.run(Dialog.java:1097)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.awt.Dialog.show(Dialog.java:1095)
         at java.awt.Component.show(Component.java:1563)
         at java.awt.Component.setVisible(Component.java:1515)
         at java.awt.Window.setVisible(Window.java:841)
         at java.awt.Dialog.setVisible(Dialog.java:985)
         at oracle.tip.tools.ide.common.graph.view.GraphPane.startEditing(GraphPane.java:1899)
         at oracle.tip.tools.ide.common.graph.view.GraphPane.startEditing(GraphPane.java:1830)
         at oracle.tip.tools.ide.common.graph.view.GraphPane.mousePressed(GraphPane.java:2186)
         at oracle.tip.tools.ide.pm.bpelgraph.views.BPELGraphPane.mousePressed(BPELGraphPane.java:2010)
         at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:262)
         at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:262)
         at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:262)
         at java.awt.Component.processMouseEvent(Component.java:6260)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
         at java.awt.Component.processEvent(Component.java:6028)
         at java.awt.Container.processEvent(Container.java:2041)
         at java.awt.Component.dispatchEventImpl(Component.java:4630)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4235)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2475)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    Caused by: oracle.tip.tools.ide.pm.modules.sca.util.SCAException: SCA_COMPONENT_NAME_NOT_DEFINEDProcessInteraction_v1
         at oracle.tip.tools.ide.pm.modules.sca.util.JDevSCAIntegrationUtil.validateNameDefined(JDevSCAIntegrationUtil.java:687)
         at oracle.tip.tools.ide.pm.modules.sca.util.JDevSCAIntegrationUtil.outboundParnerLinkCreated(JDevSCAIntegrationUtil.java:233)
         at oracle.tip.tools.ide.pm.modules.sca.ide.JDevScaProcessListener.createOutboundPartnerLink(JDevScaProcessListener.java:170)
         at oracle.tip.tools.ide.pm.modules.sca.ide.JDevScaProcessListener.modelChanged(JDevScaProcessListener.java:65)
         ... 64 more
    ======================================
    Can someone help me out!
    Thanks in advance:)

    Were you able to resolve this Issue, can you please post the solution
    글 수정: soauser

  • Slow Queries After Upgrade from 9i to 11g

    We are in the process of upgrading several of our databases from 9i to 11g. I am doing some performance testing using SQL developer and I have found that some queries are executed much faster on 9i than 11g. For example, the following query ran in 0.258 seconds on 9i and 836.50 on 11g (both databases have the same tables, indexes, data and there were no other jobs running at the time when I tested this query).
    SELECT a.seq_short as seq_short, a.seq_long as seq_long, a.MD5 as md5,
           a.upi as upi_key, a.len as length, a.crc64 as crc64, b.DBID as dbid,
           c.DESCR as descr, c.FULL_DESCR as full_descr, b.ac as accession, b.gi as gene_id
    FROM uniparc.protein a, uniparc.xref b, uniparc.cv_database c
    WHERE a.upi = b.upi
    AND b.dbid = c.id
    ;If you have any ideas what may be causing the slow down, or suggestions on how I can speed up the 11g query please let me know.
    Regards,
    Steve

    Welcome to the forums !
    How to post a tuning request:
    HOW TO: Post a SQL statement tuning request - template posting
    When your query takes too long ...
    HTH
    Srini

  • Elapsed time went up from 1min to 22min after migrating from 10g to 11g

    I just migrated one of my database from 10.2.0.2(Red hat Linux, 2 node RAC, sga= 1Gb) to 11.2.0.1 (red Hat Linux 2 Node RAC, SGA=7GB)
    The timing for one of the specific query shoot up from 1min to 22 min.
    Following is the query:
    SELECT /*+ gather_plan_statistics */   docr.DRCONTENT
        FROM      WRPADMIN.T_DOCREPORT docr, WRPADMIN.t_document doc
               WHERE doc.docid = docr.docid
       AND 294325 = doc.rdocid
               AND ( ( ( (EXISTS
                             (SELECT   'X'
                                FROM   WRPADMIN.t_mastermap mstm1,
                                       WRPADMIN.t_docdimmap docdim1
                               WHERE       doc.docid = mstm1.docid
                                       AND mstm1.dimlvlid = 2
                                       AND mstm1.mstmapid = docdim1.mstmapid
                                       AND docdim1.dimid IN (86541))))
                      OR (EXISTS
                             (SELECT   'X'
                                FROM   WRPADMIN.t_mastermap mstm2,
                                       WRPADMIN.t_docdimmap docdim2
                               WHERE       doc.rdocid = mstm2.rdocid
                                       AND mstm2.dimlvlid = 1
                                       AND mstm2.mstmapid = docdim2.mstmapid
                                       AND docdim2.dimid IN (28388)))))
    ORDER BY   doc.DOCIDThe select field (docr.DRCONTENT) is a CLOB column.
    Following is the plan and statistics in 10g
    Statistics
              1  recursive calls
              0  db block gets
         675018  consistent gets
          52225  physical reads
              0  redo size
       59486837  bytes sent via SQL*Net to client
       27199426  bytes received via SQL*Net from client
         103648  SQL*Net roundtrips to/from client
              1  sorts (memory)
              0  sorts (disk)
          51823  rows processed
    SQL>
    Plan hash value: 129748299
    | Id  | Operation                               | Name           | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads  |  OMem |  1Mem | Used-Mem |
    |   1 |  SORT ORDER BY                          |                |      1 |     50 |  51823 |00:00:14.72 |     627K|   5379 |    26M|  1873K|   23M (0)|
    |*  2 |   FILTER                                |                |      1 |        |  51823 |00:00:08.90 |     627K|   5379 |       |       |          |
    |   3 |    TABLE ACCESS BY GLOBAL INDEX ROWID   | T_DOCREPORT    |      1 |      1 |  51823 |00:00:05.42 |     159K|   3773 |       |       |          |
    |   4 |     NESTED LOOPS                        |                |      1 |     50 |    103K|00:00:12.65 |     156K|    628 |       |       |          |
    |   5 |      TABLE ACCESS BY GLOBAL INDEX ROWID | T_DOCUMENT     |      1 |     50 |  51823 |00:00:00.15 |     481 |    481 |       |       |          |
    |*  6 |       INDEX RANGE SCAN                  | RDOC2_INDEX    |      1 |    514 |  51823 |00:00:00.09 |     245 |    245 |       |       |          |
    |*  7 |      INDEX RANGE SCAN                   | DOCID9_INDEX   |  51823 |      1 |  51823 |00:00:00.46 |     155K|    147 |       |       |          |
    |*  8 |    TABLE ACCESS BY GLOBAL INDEX ROWID   | T_DOCDIMMAP    |  51823 |      1 |      0 |00:00:04.52 |     467K|   1140 |       |       |          |
    |   9 |     NESTED LOOPS                        |                |  51823 |      1 |    207K|00:00:03.48 |     415K|    479 |       |       |          |
    |* 10 |      TABLE ACCESS BY GLOBAL INDEX ROWID | T_MASTERMAP    |  51823 |      1 |  51823 |00:00:01.20 |     207K|    190 |       |       |          |
    |* 11 |       INDEX RANGE SCAN                  | DOCID4_INDEX   |  51823 |      1 |  51824 |00:00:00.41 |     155K|    146 |       |       |          |
    |* 12 |      INDEX RANGE SCAN                   | MSTMAPID_INDEX |  51823 |      1 |    103K|00:00:00.43 |     207K|    289 |       |       |          |
    |* 13 |     TABLE ACCESS BY GLOBAL INDEX ROWID  | T_DOCDIMMAP    |      1 |      1 |      1 |00:00:01.05 |     469 |    466 |       |       |          |
    |  14 |      NESTED LOOPS                       |                |      1 |      1 |     15 |00:00:14.62 |     468 |    465 |       |       |          |
    |* 15 |       TABLE ACCESS BY GLOBAL INDEX ROWID| T_MASTERMAP    |      1 |      1 |      1 |00:00:01.02 |     464 |    463 |       |       |          |
    |* 16 |        INDEX RANGE SCAN                 | RDOCID3_INDEX  |      1 |    629 |  44585 |00:00:00.29 |     198 |    198 |       |       |          |
    |* 17 |       INDEX RANGE SCAN                  | MSTMAPID_INDEX |      1 |      1 |     14 |00:00:00.02 |       4 |      2 |       |       |          |
    Predicate Information (identified by operation id):
       2 - filter(( IS NOT NULL OR  IS NOT NULL))
       6 - access("DOC"."RDOCID"=294325)
       7 - access("DOC"."DOCID"="DOCR"."DOCID")
       8 - filter("DOCDIM1"."DIMID"=86541)
      10 - filter("MSTM1"."DIMLVLID"=2)
      11 - access("MSTM1"."DOCID"=:B1)
      12 - access("MSTM1"."MSTMAPID"="DOCDIM1"."MSTMAPID")
      13 - filter("DOCDIM2"."DIMID"=28388)
      15 - filter("MSTM2"."DIMLVLID"=1)
      16 - access("MSTM2"."RDOCID"=:B1)
      17 - access("MSTM2"."MSTMAPID"="DOCDIM2"."MSTMAPID")following is the plan in 11g:
    Statistics
             32  recursive calls
              0  db block gets
       20959179  consistent gets
         105948  physical reads
            348  redo size
       37320945  bytes sent via SQL*Net to client
       15110877  bytes received via SQL*Net from client
         103648  SQL*Net roundtrips to/from client
              3  sorts (memory)
              0  sorts (disk)
          51823  rows processed
    SQL>
    Plan hash value: 1013746825
    | Id  | Operation                               | Name           | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads  |  OMem |  1Mem | Used-Mem |
    |   0 | SELECT STATEMENT                        |                |      1 |        |  51823 |00:01:10.08 |      20M|   2306 |       |       |          |
    |   1 |  SORT ORDER BY                          |                |      1 |      1 |  51823 |00:01:10.08 |      20M|   2306 |  9266K|  1184K| 8236K (0)|
    |*  2 |   FILTER                                |                |      1 |        |  51823 |00:21:41.79 |      20M|   2306 |       |       |          |
    |   3 |    NESTED LOOPS                         |                |      1 |        |  51823 |00:00:01.95 |    8054 |   1156 |       |       |          |
    |   4 |     NESTED LOOPS                        |                |      1 |    335 |  51823 |00:00:00.99 |    4970 |    563 |       |       |          |
    |   5 |      TABLE ACCESS BY GLOBAL INDEX ROWID | T_DOCUMENT     |      1 |    335 |  51823 |00:00:00.38 |     402 |    401 |       |       |          |
    |*  6 |       INDEX RANGE SCAN                  | RDOC2_INDEX    |      1 |    335 |  51823 |00:00:00.17 |     148 |    147 |       |       |          |
    |*  7 |      INDEX RANGE SCAN                   | DOCID9_INDEX   |  51823 |      1 |  51823 |00:00:00.55 |    4568 |    162 |       |       |          |
    |   8 |     TABLE ACCESS BY GLOBAL INDEX ROWID  | T_DOCREPORT    |  51823 |      1 |  51823 |00:00:00.94 |    3084 |    593 |       |       |          |
    |   9 |    CONCATENATION                        |                |  51823 |        |  51823 |00:22:16.08 |      20M|   1150 |       |       |          |
    |  10 |     NESTED LOOPS                        |                |  51823 |        |      0 |00:00:02.71 |     221K|   1150 |       |       |          |
    |  11 |      NESTED LOOPS                       |                |  51823 |      1 |    103K|00:00:01.19 |     169K|    480 |       |       |          |
    |* 12 |       TABLE ACCESS BY GLOBAL INDEX ROWID| T_MASTERMAP    |  51823 |      1 |  51823 |00:00:00.72 |     108K|    163 |       |       |          |
    |* 13 |        INDEX RANGE SCAN                 | DOCID4_INDEX   |  51823 |      1 |  51824 |00:00:00.52 |   56402 |    163 |       |       |          |
    |* 14 |       INDEX RANGE SCAN                  | MSTMAPID_INDEX |  51823 |      2 |    103K|00:00:00.60 |   61061 |    317 |       |       |          |
    |* 15 |      TABLE ACCESS BY GLOBAL INDEX ROWID | T_DOCDIMMAP    |    103K|      1 |      0 |00:00:01.14 |   52584 |    670 |       |       |          |
    |  16 |     NESTED LOOPS                        |                |  51823 |        |  51823 |00:22:13.19 |      20M|      0 |       |       |          |
    |  17 |      NESTED LOOPS                       |                |  51823 |      1 |    725K|00:22:12.31 |      20M|      0 |       |       |          |
    |* 18 |       TABLE ACCESS BY GLOBAL INDEX ROWID| T_MASTERMAP    |  51823 |      1 |  51823 |00:22:11.09 |      20M|      0 |       |       |          |
    |* 19 |        INDEX RANGE SCAN                 | RDOCID3_INDEX  |  51823 |    336 |   2310M|00:12:08.04 |    6477K|      0 |       |       |          |
    |* 20 |       INDEX RANGE SCAN                  | MSTMAPID_INDEX |  51823 |      2 |    725K|00:00:00.83 |   51838 |      0 |       |       |          |
    |* 21 |      TABLE ACCESS BY GLOBAL INDEX ROWID | T_DOCDIMMAP    |    725K|      1 |  51823 |00:00:00.92 |   51823 |      0 |       |       |          |
    Predicate Information (identified by operation id):
       2 - filter( IS NOT NULL)
       6 - access("DOC"."RDOCID"=294325)
       7 - access("DOC"."DOCID"="DOCR"."DOCID")
      12 - filter("MSTM1"."DIMLVLID"=2)
      13 - access("MSTM1"."DOCID"=:B1)
      14 - access("MSTM1"."MSTMAPID"="DOCDIM1"."MSTMAPID")
      15 - filter((INTERNAL_FUNCTION("DOCDIM1"."DIMID") AND (("DOCDIM1"."DIMID"=86541 AND "MSTM1"."DIMLVLID"=2 AND "MSTM1"."DOCID"=:B1) OR
                  ("DOCDIM1"."DIMID"=28388 AND "MSTM1"."DIMLVLID"=1 AND "MSTM1"."RDOCID"=:B2))))
      18 - filter(("MSTM1"."DIMLVLID"=1 AND (LNNVL("MSTM1"."DOCID"=:B1) OR LNNVL("MSTM1"."DIMLVLID"=2))))
      19 - access("MSTM1"."RDOCID"=:B1)
      20 - access("MSTM1"."MSTMAPID"="DOCDIM1"."MSTMAPID")
      21 - filter((INTERNAL_FUNCTION("DOCDIM1"."DIMID") AND (("DOCDIM1"."DIMID"=86541 AND "MSTM1"."DIMLVLID"=2 AND "MSTM1"."DOCID"=:B1) OR
                  ("DOCDIM1"."DIMID"=28388 AND "MSTM1"."DIMLVLID"=1 AND "MSTM1"."RDOCID"=:B2))))Calling all performance experts. Any ideas ??
    Edited by: dm_ptldba on Oct 8, 2012 7:50 AM

    If you check lines 2, 3, 8, and 13 in the 10g plan you will see that Oracle has operated your two EXISTS subqueries separately (there is a bug with multiple filter subqueries in that version that indents each subquery after the first one extra place, so the shape of the plan is a little deceptive). The statistics show that the second subquery only ran once because existence was almost always satistfied by the first.
    In the 11g plan, lines 2, 3, and 9 show that the optimizer has transformed your TWO subqueries into a single subquery, then turned transformed the single subquery into a concatenation and this has, in effect, made it execute both subqueries for every row from the driving table - all the extra work appears from the redundant execution of the thing that was the second EXISTS subquery.
    If you extract the OUTLINE from the execution plans (add 'outline' to the call to dbms_xplan as one of the format options) you may see some hint that shows the optimizer combining the two subqueries - if so then put in the "NO_xxx" hint to block it. Alternatively you could simply try adding the hint stop ALL cost-based query transformations /*+ no_query_transformation */
    Regards
    Jonathan Lewis

Maybe you are looking for