Images not oploading from SD card
Hi all just a quick question ,has anyone ever experienced the problem of images not uploading to lightroom from an sd card. The card is good as the images uploaded no problems to my alternative "Corel" editing package
I believe the clock is behaving properly. The driver should connect at a slow clock at first then increase to the highest clock that the driver thinks the card can support. If you see this clock speed change, the initialization must be getting past the first few SD card messages. You could try to adding printfs in the card driver to see which message failed.
I've had problems switching from 14.7 to 2014.3 FSBL. The later driver dropped support for older SD card and stop on very first message to the card. Maybe try a different card.
In going from dev board to custom board, did you switch from full size SD to micro SD? The micro SD format does not have a WP signal. Maybe no CD signal either. The FSBL driver cares about both.
Some official answers:
http://www.xilinx.com/support/answers/59476.html
http://www.xilinx.com/support/answers/52023.html
Similar Messages
-
Zynq custom board not booting from SD-Card
Hi all,
I have a custom designed board woth a Zynq XC7Z100 SoC and try to bring it up. The schematics are based on the ZC706 board so the MIO connections on the PS are the same.
Now I'm trying to boot just the simple Hello World example from XSDK (Vivado Version 2014.3). Booting from JTAG and from QSPI Flash is working but booting from SD-Card fails. The FSBL is producing the following output:
Xilinx First Stage Boot Loader
Release 2014.3 Nov 5 2014-17:42:52
Devcfg driver initialized
Silicon Version 3.1
Boot mode is SD
SD: rc= 0
SD: Unable to open file BOOT.BIN: 3
SD_INIT_FAIL
FSBL Status = 0xA009
This Boot Mode Doesn't Support Fallback
In FsblHookFallback function
I've measured all data pins and they are toggling. What I've found out is that the SDIO Clk is somehow strange. When starting the FSBL it is a very slow clock (kHz) and afterwards it's speeding up to 41.6666 MHz. I've already changed the SDIO clock in Vivado from 125 MHz to 50 MHz but nothing changes, when I'm measuring it. Do I miss something out?
Any help would be greatly appreciated.
Thanks
ChristophI believe the clock is behaving properly. The driver should connect at a slow clock at first then increase to the highest clock that the driver thinks the card can support. If you see this clock speed change, the initialization must be getting past the first few SD card messages. You could try to adding printfs in the card driver to see which message failed.
I've had problems switching from 14.7 to 2014.3 FSBL. The later driver dropped support for older SD card and stop on very first message to the card. Maybe try a different card.
In going from dev board to custom board, did you switch from full size SD to micro SD? The micro SD format does not have a WP signal. Maybe no CD signal either. The FSBL driver cares about both.
Some official answers:
http://www.xilinx.com/support/answers/59476.html
http://www.xilinx.com/support/answers/52023.html
-
Pixelated Images when Importing from SD Card
Hi there,
Im having a recurring issue when importing images from my SD Card.
The issue is that when I try to view in the 'Loupe' view, the images don't load at full size, the '1:1' is absolutely tiny?
Any ideas??
Thank you.Yeah, the black bars at the top and bottom of the tiny preview indicate it is a camera thumbnail, not a large-sized preview embedded in the raw file. Without seeing the raw file, itself, it’s hard to know if there is actually a reasonable-sized preview embedded in it or just the tiny thumbnail. If you want someone else to take a look, upload a raw file to http://www.dropbox.com/ and post a public download link to it, here.
And more importantly, as was just asked, does the image import ok. If so then you’ll just have to do the importing, first, before you sort through what you want. -
Elements 9 not uploading from SD card
Why is Elements 9 not uploading photos from my SD Card all of a sudden. Opening screen indicates Elements PS no longer available. I do not use this. For years I have always used "Organize" from the opening screen, not "Edit". Then when I go to File/Get photos from/Camera or Card Reader, and select that option, I receive a message stating "No Source Found." I have PC and Windows 7. Need answers.
Maybe this will help:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
NOTE: If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds.
OT -
Images not loaded from WEB-INF/lib/images.jar
The images are found in root/images/*.gif, but not
when jarred up and placed in the lib folder. I've looked everywhere
for a solution but all I've seen is suggestions of other places to put
the folder, or to add it to the classpath.
The jar is being loaded but the images are not found. Or at least the images are not showing up - the table where the main image is linked expands to the size of the image when the path is correct.
Does anyone know the solution to this problem? I don't want to just leave them in the folder at root level, because this does not work if I set a default url pattern for the control servlet.
Thanks,
GregThe images are found in root/images/*.gif, but not
when jarred up and placed in the lib folder. I've
looked everywhere
for a solution but all I've seen is suggestions of
other places to put
the folder, or to add it to the classpath.
The jar is being loaded but the images are not found.
Or at least the images are not showing up - the table
where the main image is linked expands to the size of
the image when the path is correct.
Does anyone know the solution to this problem? I don't
want to just leave them in the folder at root level,
because this does not work if I set a default url
pattern for the control servlet.
Thanks,
GregIf your planning to make the images accessible by normal html tags - img etc, then they cant be in a jar, and they must be in a location from which the container serves content - i.e not under WEB-INF. Unless you want to write a special servlet which does nothing but read the images and feed them to the client - but I wouldnt recommend that.
Sounds like your using Struts, and sounds like youre not using weblogic since you wouldnt be able to serve even jsp�s (using forward) from under WEB-INF if you were. Putting jsp�s under WEB-INF sounds like such a good idea when using Struts, but in practice... -
Why are the images not printing from InCopy? Why is the relink button in Links panel ghosted?
I am having a problem with printing from Incopy. All stories are editable and that is working just fine. I am able to view the images although AD has set the graphics to not be editable yet I can still see them of course.
My problem is upon wanting to print the layout. Getting a message that the image links are missing. I have not moved the original folders (they are all set up on the same level in one main folder). I am working remotely, layout based workflow via dropbox.
My client would like to have the option to print layouts also initially. How can I relink the images if the "relink" button is ghosted. Can somebody help me please? I have tried doing a restart… Any ideas?the-edmeister, you are a genious. I went to "view" then "toolbars" and de-selected "yahoo toolbar" and then moved the curser over my firefox page and it now works completely including the problem area (the top 3 cm of each screen). Thank you, thank you, thank you, thank you, thank you, thank you. You have no idea how good I feel know on this otherwise cold, windy and rainy day.
-
CSS for background image not transfering from template to new page
I have a gradient .gif in my templates which suddenly no longer transfers from the template to a new page created from the template. Everything else about the template transfers. I'm using Dreamweaver CS5 on a Mac running OS 10.6. I've pasted the CSS from the template and the new page below. I've tried the usual voodoo--restart program, restart computer, repair permissions, delete preference file, delete personal configuration file.
CSS from Template:
.container {
background-color: #ececec;
background-image: url(../images/faux_column.png);
background-repeat: repeat-y;
height: 650px;
width: 650px;
CSS from page created from Template looks to be the same, but is greyed out in the code, and the background-image entry is not present in the CSS styles inspector:
.container {
background-color: #ececec;
background-image: url(../images/faux_column.png);
background-repeat: repeat-y;
height: 650px;
width: 650px;
Any suggestions greatly appreciated.Unfortunately, I don't yet have a site where I can post the page. I'm new to this, and doing everything locally for now.
After careful rechecking, I found that the links for the template and the child were not the same, as you suspected. So I carefully changed the links to site root relative, which worked for the background CSS in my test image. I then did the same for all of the links to pages on my site, and checked that all were OK with Link Checker in DW. I guess that was a mistake, because now most of them don't work when tested in Firefox--I get the message File not found. Must be doing something wrong. -
Can't imoprt images into Aperture from CF card
I have just installed Aperture into my Mac Book Pro. I connected my card reader (with compact flash card) to a usb port which opened Aperture. I selected "import images" and Aperture correctly identifies my camera (Canon 5D) and CF reader, but displays "No images to import. Yet I am able to import these same image files (RAW) into iPhoto or Adobe Bridge with no problem. I have deleted & re-installed Aperture with the same results. Help!
This post was a couple weeks ago and the original poster may have found a solution already. But, I'm posting to offer a different explanation for others that may have the same problem.
When I get the "No images to import", it is because Aperture is not done scanning the CF card. Some cards apparently take longer to scan, especially the larger cards. I had never seen this error before I bought larger CF cards. Compact Flash cards that are 2GB-4GB never give me this problem as the cards are scanned quickly.
I usually go do something else and come back. I don't think it has taken more than a couple minutes before the "No images to import" button changes to reflect the number of images on the card and enabled. My largest CF is 16GB. If you have something larger, I would probably give it 5-10 minutes.
Hope this helps someone. -
Images not opening from organiser into pse 11
Hi just downloaded trial version on mac, running mountain lion, when I select an image in organiser and click open in editor the editor opens but doesnt load an image.
Any help, thankssorry for delay, been away. formats are jpgs and tiff, tried short cuts, the only way is to open a file from finder on mac it will open with editor. also if open picasa organiser it will then open from there? but not from elements organiser, got in touch with adobe who said cant help as trial version !! really going to inspire me to buy. I may try uninstalling and re downloading. seems like a great editor. organiser is good but one massive thing left out, 100% zoom to check focus etc. thanks for yur help
-
I have a balance of $32.86 on my account (from loading a Itune gift card) which I have not used. How can I redeem this if I buy a song. I ask the code which I don't have anymore.
If the card has been redeemed onto your account then you shouldn't need to re-enter it - I've never had to re-enter any of mine, and once a card has been redeemed it effectively becomes zero, it's value should be added to your balance. What is happening when you try to buy the song ?
-
Images not linking from .swf within Dreamweaver
I am hoping someone can help...it's probably an easy fix.
I had this simialar probelm of my .swf being too large (http://forums.adobe.com/message/3705787#3705787) So I went and linked all of the images.
I am placing the flash catalyst .swf into dreamweaver, adding a simple footer (for ios users that flash doesn't work for) and the uploading to the site.
This is how my folders look:
I have place the full 'deploy to web' folder within the _assets folder and placed the main.swf from this location, however when I go to the site none of the linked images are there - www.coocoocreative.com
Does anyone know where I am going wrong? (I have checked my hosting server and all the folders are there).
Thanks!Ok...it was really simple and I figured that problem out. I wasn't linking the .swf relative to the site root' (ok ok, I'm still learning, please be patient )
Thanks! -
Still Images not changing and title cards doing same.
If i was to add 5 images into i movie and hit play when the image is meant to change it doesnt, it changes on the clip after the one is is meant to. Title cards do the same.
Its like some where to clip is being told to run for longer than i can see!Welcome to the forum.
Along with John's question regarding the pixel x pixel size, have you thought about doing the work with the stills in PrPro, and then just Exporting as is necessary (or using ADL)? While Encore has a limited SlideShow feature, it is designed to work better with AV files, than stills.
Good luck,
Hunt -
Hi,
I have a webpage created in flash which uses xml to load specific gallerys into movie clips. Everything works fine in preview, but when uploaded it doesn't work. When you click on film or any of the other galleries, the galley does not load. I don't know whether this has something to do with the hosting or not. I'm only begining to use xml so my knowledge is quite limited. Any help would be much appreciated. The website adress is below. I've also attached my action script. Cheers
http://www.honeytree.com.au/luke/walshwebsite/
function loadXML(loaded) {
if (loaded) {
xmlNode = this.firstChild;
image = [];
description = [];
thumbnails = [];
total = xmlNode.childNodes.length;
for (i=0; i<total; i++) {
image[i] = xmlNode.childNodes[i].childNodes[0].firstChild.nodeValue;
description[i] = xmlNode.childNodes[i].childNodes[1].firstChild.nodeValue;
thumbnails[i] = xmlNode.childNodes[i].childNodes[2].firstChild.nodeValue;
thumbnails_fn(i);
firstImage();
} else {
content = "file not loaded!";
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("film.xml");
listen = new Object();
listen.onKeyDown = function() {
if (Key.getCode() == Key.LEFT) {
prevImage();
} else if (Key.getCode() == Key.RIGHT) {
nextImage();
Key.addListener(listen);
previous_btn.onRelease = function() {
prevImage();
next_btn.onRelease = function() {
nextImage();
p = 0;
this.onEnterFrame = function() {
filesize = picture.getBytesTotal();
loaded = picture.getBytesLoaded();
preloader._visible = true;
if (loaded != filesize) {
preloader.preload_bar._xscale = 100*loaded/filesize;
} else {
preloader._visible = false;
if (picture._alpha<100) {
picture._alpha += 10;
function nextImage() {
if (p<(total-1)) {
p++;
if (loaded == filesize) {
picture._alpha = 0;
picture.loadMovie(image[p], 1);
desc_txt.text = description[p];
picture_num();
function prevImage() {
if (p>0) {
p--;
picture._alpha = 0;
picture.loadMovie(image[p], 1);
desc_txt.text = description[p];
picture_num();
function firstImage() {
if (loaded == filesize) {
picture._alpha = 0;
picture.loadMovie(image[0], 1);
desc_txt.text = description[0];
picture_num();
function picture_num() {
current_pos = p+1;
pos_txt.text = current_pos+" / "+total;
function thumbNailScroller() {
// thumbnail code!
this.createEmptyMovieClip("tscroller", 1000);
scroll_speed = 20;
tscroller.onEnterFrame = function() {
if ((_root._ymouse>=thumbnail_mc._y) && (_root._ymouse<=thumbnail_mc._y+thumbnail_mc._height)) {
if ((_root._xmouse>=(hit_right._x-40)) && (thumbnail_mc.hitTest(hit_right))) {
thumbnail_mc._x -= scroll_speed;
} else if ((_root._xmouse<=40) && (thumbnail_mc.hitTest(hit_left))) {
thumbnail_mc._x += scroll_speed;
} else {
delete tscroller.onEnterFrame;
function thumbnails_fn(k) {
thumbnail_mc.createEmptyMovieClip("t"+k, thumbnail_mc.getNextHighestDepth());
tlistener = new Object();
tlistener.onLoadInit = function(target_mc) {
target_mc._x = hit_left._x+(eval("thumbnail_mc.t"+k)._width+5)*k;
target_mc.pictureValue = k;
target_mc.onRelease = function() {
p = this.pictureValue-1;
nextImage();
target_mc.onRollOver = function() {
this._alpha = 50;
thumbNailScroller();
target_mc.onRollOut = function() {
this._alpha = 100;
image_mcl = new MovieClipLoader();
image_mcl.addListener(tlistener);
image_mcl.loadClip(thumbnails[k], "thumbnail_mc.t"+k);Your xml file appears to be specifying local drive paths rather than web paths...
\film\DSC_0040web.jpg
should be
film/DSC_0040web.jpg -
Images not importing from Word doc
SORRY MODS - Accidently posted this in the HTML Help forum
I'm having trouble getting my images placed in a Word
document to import ito my project. I have RoboHelp 2002 and first
experienced the problem there, thought I'd try the upgrade to see
if that fixes the problem. It did fix my step numbering problems
(all steps were numbered Step 1), but the image import problem
remains. The images are .jpg images and most were placed in Word
using Insert Image. Some were just copied and pasted. Regardess of
how the images were included in the doc, none come through in an
import. Am I doing somethig wrong? I've tried importing it as a
Word 2000 and a Word 2003 doc with no luck.
Thanks in advance for any advice!
MikeI had the same issue and could get no good advice on how to
fix it. What I finally did was take the embedded images from the
Word doc and save them in another location. I then inserted them
back into RoboHelp after I imported the Word doc. It's a little
tedious, but it worked. -
Images not removed from memory after being disposed of
I am trying to load an image, take a thumbnail of the image, store the thumbnail in an arraylist and then discard the image before moving on to the next one.
Here is some compilable sample code. it brings up a open file dialog. select a few images and watch as the memery usage goes through the roof (make sure they are decent size, i am using 1600x1200)
I think the reason it is not working is because the image isnt being flushed after the thumbnail is taken as there is still a reference to it in mem.
any body any ideas?
<code>
import java.awt.Image;
import java.io.File;
import java.util.ArrayList;
import javax.imageio.ImageIO;
import javax.swing.ImageIcon;
import javax.swing.JFileChooser;
import javax.swing.JOptionPane;
public class Thumbnail {
public Thumbnail(){
File[] files;
int i=0;
ArrayList list = new ArrayList();;
JFileChooser fc = new JFileChooser("C:/");
fc.setMultiSelectionEnabled(true);
int returnVal = fc.showOpenDialog(null);
if (returnVal == JFileChooser.APPROVE_OPTION) {
files = fc.getSelectedFiles();
for(i=0; i<files.length; i++) {
list.add(openImage(files));
JOptionPane.showMessageDialog(null, "Added " + i + " images", "Done", JOptionPane.ERROR_MESSAGE);
System.exit(0);
public ImageIcon openImage(File file){
Image tempImage = null;
try{
tempImage = ImageIO.read(file);
} catch (Exception e){}
return new ImageIcon(tempImage.getScaledInstance(-1, 100, 0));
public static void main(String[] args) {
new Thumbnail();
</code>
thanks
kevinWith ImageIO, you can set subsampling rates and never create that original monster image:
import java.awt.*;
import java.awt.image.*;
import java.io.*;
import java.net.*;
import java.util.*;
import javax.imageio.*;
import javax.swing.*;
public class AllThumbs {
public static void main(String[] args) throws IOException {
URL url = new URL("http://www3.us.porsche.com/english/usa/carreragt/modelinformation/experience/desktop/bilder/icon3_1600x1200.jpg");
BufferedImage[] images = new BufferedImage[2];
images[0] = readSubsampling(url.openStream(), url.getPath(), 240);
images[1] = ImageIO.read(url);
displayImages(images, new String[]{"thumbnail","original"});
public static BufferedImage readSubsampling(InputStream in, String suffix, int maxSize) throws IOException {
ImageReader reader = getReader(suffix);
reader.setInput(ImageIO.createImageInputStream(in), true, true);
ImageReadParam param = reader.getDefaultReadParam();
int size = Math.max(reader.getWidth(0), reader.getHeight(0));
int subsampling = size/maxSize + (size%maxSize != 0 ? 1 : 0);
param.setSourceSubsampling(subsampling, subsampling, 0, 0);
BufferedImage image = reader.read(0, param);
System.out.println("Size = " + size + ", maxSize = " + maxSize + ", w = " +
image.getWidth() + ", h = " + image.getHeight());
reader.dispose();
return image;
public static ImageReader getReader(String path) throws IOException {
String suffix = getSuffix(path);
Iterator readers = ImageIO.getImageReadersBySuffix(suffix);
if (!readers.hasNext())
throw new IOException("No reader for suffix " + suffix);
ImageReader reader = (ImageReader) readers.next();
if (readers.hasNext())
System.out.println("(There are more readers for suffix " + suffix + " )");
return reader;
public static String getSuffix(String path) throws IOException {
int dotIndex = path.lastIndexOf('.');
if (dotIndex == -1)
throw new IOException("Suffix not found for " + path);
return path.substring(1 + dotIndex);
public static void displayImages(BufferedImage[] images, String[] titles) {
JFrame f = new JFrame("total #images = " + images.length);
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
Box imagePanel = Box.createVerticalBox();
for(int i=0; i<images.length; ++i) {
JLabel label = new JLabel(new ImageIcon(images));
label.setBorder(BorderFactory.createTitledBorder(titles[i]));
imagePanel.add(label);
f.getContentPane().add(new JScrollPane(imagePanel));
f.setSize(450, 400);
f.setLocationRelativeTo(null);
f.setExtendedState(Frame.MAXIMIZED_BOTH);
f.setVisible(true);
Maybe you are looking for
-
I Have a new wifi router and have set up my iPad / iPhone and wireless printer correctly to the new router but I can't print from the iPad and iPhone. It keeps saying ' no AirPrint printer found'. Help please!
-
How do I get my bookmarks bar back on my safari browser window?
how do I get my bookmarks bar back on my safari browser window?
-
ALSB 2.6 generated WSDL is Invalid?
Hi All, When I am trying to use WSDL generated by AquaLogic Service Bus 2.6 into portal using a service Control, it is giving me an exception stating that WSDL is invalid and some ..... long exception. How come WSDL generated by the tool is invalid??
-
My play and power key doesn't work?
My play and power key doesn't work any ideas?
-
Bose companion 2 speakers with airport express?
Will these speakers work with airport express? Do I need any additional wires? http://store.apple.com/uk/product/H0832B/A?fnode=MTY1NDA0MA&mco=MTkzMTk5NzE