Imaq image control (Delete default Value)

I have a problem with the vision imaq image control.
I have defined for a "imaq image control" a default image for the development.
Now the default image is no longer need and i want to remove the default value an reset the Control to an empty image.
How can i reset the default Value from the "imaq image control" to an empty image?
Solved!
Go to Solution.
Attachments:
imaq_image.vi ‏2726 KB

Cardinal1664 wrote:
I have about 20 Vi's with imaq image controls with default images!
I don't want to too that progmaticaly!?
Another possible way is to automate this task, something like this:
Just obtain list of VIs where Vision Control should be resetted to default, then run snippet above in the cycle.
Andrey.
Attachments:
Empty Images.vi ‏17 KB

Similar Messages

Using IMAQ Image controls in LabVIEW steps

Hi guys
So far, I was using TestStand 4.0 together with LabVIEW 8.5 and Vision Development Module 8.5 with no problems. Recently, I've updated to LV 8.6 and VDM 8.6. I've started to experience weird problems when using LabVIEW steps with inputs/outputs containing IMAQ Image controls. When I try to click on such a step in seq editor, or try to insert a new step into the sequence, the step initialization takes a very long time (tens of seconds) or freezes completely. I've also tried to upgrade TS to version 4.1, but no difference. Also, my colleague experiences very similar symptoms on the same software setup. The only difference is that on his machine, it takes only a few seconds when you click on the vision step. However, the steps not containing an IMAQ Image control behave normally, i.e. you can't experience any "initialization time" when clicking on them in the sequence.
To illustrate, I'm attaching a simple VI containing nothing more that a single IMAQ Image control. If you don't link it to the connector pane, the VI works fine when inserted as a TS step. If the IMAQ Image control is linked to the connector pane, TS freezes when inserting such a step.
Vladimir
Solved!
Go to Solution.
Attachments:
ft5.vi ‏5 KB

Hello Vladimir,
Thank you for posting on the NI Discussion Forums. This was reported to R&D (#123249) for further investigation. The only workaround I can offer for now is to work with the VIs from version 8.5 of LabVIEW if they have vision controls linked to the connector pane. Thanks for the feedback!
Chris_G
Sr Test Engineer
Medtronic, Inc.

Setting control to default value when it is a strict type def

If my subVI has a control that happens to be a strict type defined cluster and I have saved the values in the control as the default values, how can I change them back to the default values of the type def (which are empty). Because it is a strict type definition, i cannot click on the elements inside the cluster and modify them (e.g. click on an array inside the cluster and do an empty array operation.)
In the attached screenshot, the control "BLE Meters To Test" is just an array of clusters and I was able to empty the array. The control "Capture Data" is a strict type def. I would like to clear the contents of this control without having to delete the control and add it back with a new instance of the same strict type def.
Solved!
Go to Solution.
Attachments:
screenshot.PNG ‏33 KB

are you talking about edit mode or run mode?
You could temporarily add a second instance of the typedef (all empty), then change it to a constant. Whenver you need to reset at run time, write the new digram constant to a local variable of the control.
glstill wrote:
Because it is a strict type definition, i cannot click on the elements inside the cluster and modify them (e.g. click on an array inside the cluster and do an empty array operation.)
Make sure to click on the array container, not on the array elements.
LabVIEW Champion . Do more with less code and in less time .

Programitically Reinitialize Specific Front Panel Controls To Default Values

Hi everyone, I know I can re-initialize "all" controls to their default values using an Invoke Mode. How do I re-initialize only specific controls I want to re-initialize to their default value? Basically, I want to re-initialize all the controls except for one control. I want to do this during run-time of the VI.
Thanks so much!

In your situation, I would probably just reinitialize all and then immediately set the value of that one control. Your alternative is to use the Reinitialize Value method for each and every control except that one. You could do this in a FOR loop easily enough.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Problem of imaq image control events

Hi,
I use CVI 2010 and NI Vision 2010 to develop a motion and machine vision system.
I got a problem of using the imagecontrol, I can not capture the EVENT_KEYUP,EVENT_KEYPRESS and EVENT_LEFT_CLICK, EVENT_LEFT_CLICK_UP in the image control's callback.
I also tried to use the function of InstallWinMsgCallback (g_hMainPnlHdl,WM_KEYUP,KeyupCallback,VAL_MODE_INTERCEPT,NULL,&hKeyupCbHdl) to install the WM_KEYUP event, the message is captured when the mouse pointer is outside of the image control,but when the mouse pointer entering the image control, the WM_KEYUP event is missing. I think the image control has intercepted and blocked these messages.
Anyone can help me? Thank you very much!
Awen

It seems to work for me. I just tested EVENT_LEFT_CLICK and had the event increment a numeric each time it fired. I just configured a callback function called "ImageCallback" in the Image control properties, then created a callback function. I have attached the whole project below.
www.movimed.com - Custom Imaging Solutions
Attachments:
Image Control Callback.zip ‏553 KB

Table Control with default values for a Column

Hi,
I have a table Control with fields kschl    kbetr    konwa    mark
i have created a range for KSCHL
now i need to pass this to the table column
Kindly suggest how can i handle this?
BEGIN OF y_condition,
kschl       TYPE kscha,
kbetr       TYPE kbetr_kond,
konwa       TYPE konwa,
mark        TYPE char1,
END OF y_condition,
t_cost TYPE STANDARD TABLE OF y_condition,
MODULE mo_tc_cost_init OUTPUT.
IF w_tc_cost_c IS INITIAL.
    REFRESH CONTROL c_tc_cost FROM SCREEN c_scr2000.
    REFRESH t_cost.
    MOVE c_select TO w_tc_cost_c.
    FREE r_kschl.
    MOVE: c_i    TO r_kschl-sign,
          c_eq   TO r_kschl-option,
          c_zhb1 TO r_kschl-low.
    APPEND r_kschl.
    MOVE: c_i    TO r_kschl-sign,
          c_eq   TO r_kschl-option,
          c_zhb2 TO r_kschl-low.
    APPEND r_kschl.
    MOVE: c_i    TO r_kschl-sign,
          c_eq   TO r_kschl-option,
          c_zhb3 TO r_kschl-low.
    APPEND r_kschl.
ENDIF.

Can you clarify please?... you say have a table control containing the following columns:
kschl TYPE kscha,
kbetr TYPE kbetr_kond,
konwa TYPE konwa,
mark TYPE char1
so where do you expect the range table "r_kschl" to appear? ... did you want a second table control on the screen?
Jonathan

Don't understand IMAQ image behavior

Hi there,
     I have several image controls in my application. When I assign image A to image B (in my wiring diagram), and then close image B, image A is no longer valid! When I try to crop image A after closing image B, I get a "not an image" error. If I do not assign image A to image B, I don't get the error. If I do not close image B after assigning image A, I don't get the error.
     I am new to IMAQ and don't understand this behavior at all. It looks like when I try to give the value of image A to image B, it somehow links the two rather than just copying the information over. Is this a pointer and reference vs. value assignment issue?
     Regardless, these IMAQ image controls behave differently than any other control in the labview palette. I hope someone can explain what I am seeing to me so that I that I can learn when I can assign one image to another, and when I can close, and how I can avoid extremely confusing and difficult to debug results.
Thanks,
Eric

Hi,
You must create each of Image A and Image B separately using IMAQ Create and then copy content of image A to image B using IMAQ Copy.
Image Display control in Labview does not create an image and does not reserve memory for it. It just displays content of the image it is wired to. I suspect that when you "assign" image A to image B in your program, you just wire the same image to 2 Image Display controls. No wonder they show identical image. When you "close image B", you actually closing the only image you have, memory space allocated fot that image is released and reference is no longer valid. After that any attempt to modify/change that image will return "not an image" error.
I recommend you to look into Vision examples shipped with Labview - see for example "Extract Example.vi" in "C:\Program Files\National Instruments\LabVIEW 7.1\examples\Vision\2. Functions\Image Management". In the path above you should change LabVIEW 7.1 to your version of LabVIEW.

How can I use or convert a imaq image to plot images back on waveform graph

Hi
I am currently opening and manipulating (rotate and resize) a PNG image using IMAQ Vision in LabView 8.2.1 This works well and I can display the Image on the front panel using a IMAQ Image Control.
In addition to this I would now like to display the image as a background on waveformgraph. I can do this with the original PNG file by reading it and then flatten it to a pixmap ie make it a Picture but this is of little use as I need to use the manipulated IMAQ image.
Therefor I would like to know how to convert the manipulted IMAQ Image to right Picture Format (without resaving) in order to use it on the PlotImages.Back property node of a wavefrom graph.
I very much welcome your suggestions as I feel it should be easy yet can not seem to solve it. Thank you for your time!!!

Hi Randall
Apologies for replying somewhat late but I have been out of the office for a few days.
Your suggestions and code helped me greatly and led to solving my query so thank you for that.
There is one more thing (well many many more but I will place new posts for those however that you might be able to answer for me.
Following your suggestion to use the image to array function I searched through more examples and found the code that did exactly what I wanted to do. Please see attached.
In this code a For loop is used to add 65793 to the color table. It works very well but I do not know why it is used exactly. Can you exlplain? I also realize I never made it clear that I use grayscale PNG files rather then color images.
Thanks again for your excellent help, it is much appreciated.
Attachments:
IMAQ_8-bit_to_picture v1.vi ‏15 KB
Test Image.png ‏42 KB

Ssrs parameter default value not showing ,when available values is binded to query dataset

I have developed a report using sql server data tools for vsiual studio2012 ,i have defined few parameters ,on one of the parameter when available values is binded to a dataset query, the report default value is not showing in report preview .
Many Thanks
Chandra

Hi Chandra,
According to your description, you have set the default value for a parameter, but it's not displayed when initially running the report. Right?
In this scenario, since you have set the available values bind to query, so your default values should be within these available values. If these default values are not within the available values, the default values will be not displayed. So please check
the default values.
Reference:
Add, Change, or Delete Default Values for a Report Parameter (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Personalization and Default values in selection screen variables

Hi everyone,
I have certain questions regarding Front end part:-
1)     Can we have multiple personalizations for a single user in Web templates; I know it is quite possible in BEx using Variants. Is there any such approach or any other solutions regarding it?
2)     In our project we had a range selection screen customer exit variable on 0CALMONTH, which is showing a default value of 07.2007 to 09.2007, although we have removed the default values from the query variable and also checked the customer exits where it is used, but still its showing the value. We cant delete and recreate the variable as such, as it is used in number of function module. Also these values are also transported to Quality system, where also its showing the same value.
Did anyone face such a situation before?
Eagerly waiting for a solution.....
Thanks in advance

Hi Chiran,
Please try with following approach for multiple   personalizations for a single user in Web templates.
While Defining Variable Choose the Option Copy personalization data from variable .
The Features of above approach is as follows.
1)It will personalize variable values for Input Variables for each user.
2)These values are saved for each variable as well as for user.
3) At the time of defining variable it will allow us to enter one or more default values.All these values are appear in the variable screen when u execute the query or Web Application.
So you can see the variable values in web also.Just try with this approach.
May be it will resove u r issue some extent.
Regarding u r Second Query Just try with Some tables, all the default values entries were saved in those tables. Delete default values from those entries.
Thanks & Regards,
Chandu.

Reset numeric control to default

Just wondering if you can reinitialise a numeric control to default value while a vi is running. I want to enter a batch number, when I press end batch button I want the batch number numeric control to return to either zero or blank.
Thanks,
David
Solved!
Go to Solution.

Yes you can, see attached example.
BR
/Thomas
Attachments:
BatchTest.vi ‏11 KB

How to set default value to current date in Webcenter Imaging Application?

Hi
I have created an application in Webcenter Imaging and have a field called as ScanDate.
While uploading documents against that particular application, i want that ScanDate field should default to Current Date.
I tried setting the default value but it becomes a static date.
Can anyone suggest me what to do in this case?
Regards
ACM

You can't do that anyway. The default values are saved as part of the VI and a built application can not do that. Instead, you will have to do this yourself by saving the data to a file, loading it and wiring it into a local variable of the control. You can do this, for example, with the configuration file VIs or, if you want to rely on the good work that other people already did, you can go to the OpenG site and download their file package, which includes saving control values to INI files.
Try to take over the world!

Vision Builder 7.0(IMAQ) : Using fxs in subVIs with references to image control

When using IMAQ fxs (such as 'Write File') in subVIs, if one wanted to use references to an image control, what property or method would be used to feed into the image terminal in the imaq fx on the subVI? Is this possible?
What did work: I was able to directly use the image control on the main feeding an image control on the subvi panel (which is then fed directly to imaq fx)
What did not work: From a refnum control for the image on the main, I used (within the subVI) the value property fed to a 'Variant to Data' with type as image control, then feeding the output of this into imaq fx.

Typically you would update an Image Display control from a subVI using the Value property nodes. However, this method does not currently work with LabVIEW 7 and Vision 7, but the issue will be resolved in the next release of LabVIEW and Vision.
In the meantime, in addition to the solution you found you could also use a global variable to pass images from one VI to another. Using a global variable works, but not in the same way as a reference or property node would. With a reference or property node, you can pass a reference of the control to a subVI and have the subVI update the control's image. Using global variables, the subVI will update the global variable with the new images, but you need a loop monitoring the global variable in your top level VI.
I hope this
helps! Best wishes.
Regards,
Dawna P.
Applications Engineer
National Instruments

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to find a default value to AutoComplete Control

Hi,
I am using AutoComplete control where i populate it with data from an oData service
var control= new sap.ui.commons.AutoComplete({
displaySecondaryValues: true,
items: {
path: "/",
template: new sap.ui.core.ListItem({text:"{NAME}", key:"{HOSPITAL_ID}", additionalText:"{STATE}"})
This is my implementation in fragment and in on after rendering I want to bind a default value to it.How can I achieve this?
for e.g.:
In drop down box I can achieve this with the below code
_myController.dropDownBox.bindProperty("selectedKey","HOSPITAL_ID");
I tried with similar approaches for AutoComplete control but I cannot bind value to it..Anyone can suggest a possible solutions please?
Best Regards,
Amala Suganya

Hi,
if you want to display default value in AutoComplete then you can do it as below,
                var oAuto1 = new sap.ui.commons.AutoComplete("TextField-1", {
                                tooltip: "This is an Auto Complete TextField",
                                change: onChange,
                               value: aData[5].name,
                                maxPopupItems: 2,
                                ariaDescribedBy: "MyDesc",
                                ariaLabelledBy: "MyLbl"
value property is used to display default value. alternatively you can use setValue method.
also refer this example AutoComplete - sap.ui.commons
Regards,
Chandra

Imaq image control (Delete default Value)

Similar Messages

Maybe you are looking for