IMessages and FaceTime could not be used.is there any restrictions in oman for usage ?, iMessages and FaceTime could not be used.is there any restrictions in oman for usage ?
HiiMessages and FaceTime could not be used.is there any restrictions in oman for usage ?, iMessages and FaceTime could not be used.is there any restrictions in oman for usage ?
Answer would be no unless application provided such feature. Numbers does not as far as I know.
Note that even if you have complete list of formulae used in a table, identifying formulae referencing any given cell is not simple.
E.g., cell T20 is referenced not only in
=T20+1
but also in
=SUM(T)
=SUM(20:20)
=SUM(S19:U22)
=OFFSET(S1,19,1,1,1)
=INDIRECT("T"&(10*2))
In order to identify such formula, we have to actually evaluate it to see if it references the given cell. Especially such formula as OFFSET() and INDIRECT() may not be found by static parser because their parameters can be dynamic.
Sorry to be the bearer of bad tidings.
H
Similar Messages
-
I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage -
I´d like to add an EMail account on top to my mobile number to use more this services. My password will not be accepted!!!??? I try it and i try it and i try ist, throughout the same problem. Whats on? The user help desk said, i´ve to reset and use the WLAN key new as well as possible - no way!Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN -
Could facetime be used for international calls and free of charge???
Could facetime be used for international calls and free of charge???
Or does it work the same way as any other 2G calls???For the iphone 4, I believe that have to do a initial voice call first (if it's not in your recent call list), and then start the live video chat (facetime). I could be wrong but if you have no recent call history with facetime, you would have to start a voice call again, and then immediately switch to facetime to prevent international cost. I haven't tried this so I would not now, but I only assume that if you don't have him/her on the recent list with facetime.
-
I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?
I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%% -
my wife and I share an iCloud account for photo library and iCloud drive mainly for our family photo management, but we use different accounts for iMessage/facetime/calendar/etc. With Yosemite, I can't use continuity/handoff without dumping the primary photo iCloud account and thus our shared photo system. We are running yosemite OS X 10.10 and iOS 8.0.2... Is there any way to do this?
my wife and I share an iCloud account for photo library and iCloud drive mainly for our family photo management, but we use different accounts for iMessage/facetime/calendar/etc. With Yosemite, I can't use continuity/handoff without dumping the primary photo iCloud account and thus our shared photo system. We are running yosemite OS X 10.10 and iOS 8.0.2... Is there any way to do this?
-
Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back
I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps -
hi...m using a mac pro quad core.....its not booting up...i can only see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
regards,
v.s.bharanWelcome to Apple Discussions!
Do you keep your data backed up?
If not, you should always do so*:
http://www.macmaps.com/backup.html
You never know when a hard drive or a directory might go bad. Having a bootable clone is a must.
That link also shows you some tools you can use to recover data.
If you aren't backed up, try buying those tools first, before attempting to repair the directory.
Directory issues can be fixed with these tools*:
http://www.macmaps.com/directoryfaq.html -
Hi , does anyone know how to fix the problem with imessages. Sometimes it works and more often than not it doesn't. I upgraded my iphone 3gs a couple of weeks ago and the imessaging worked splendidly but now it hardly works at all. Both my daughters have the same problem and it isn't the wifi coz they live in different parts of the country.
Any help on this matter would be apppreciated as its doing my head in
I have an iphone 3gs and my daughters have iphone 4's.
I have reset my iphine but to no avail
Regards
cfcspark88Hi Louise, sorry to hear of your problems. This is not Adobe. We are mainly support volunteers, other users like you, trying to help one another. You need to contact Adobe directly for activation and licencing issues. Click the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on. Don’t let them pass the buck. Stay connected and ask to speak with a supervisor if necessary.
Click here to get help now Contact Customer Care -
Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.
All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747 -
My iMessage and facetime is not working after updating to ios 7...
Any answers on how to fix it? I've tried to restart, restore connected to itunes, but nothing.ACTIVATING FACETIME AND IMESSAGES
Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS. Check with your carrier to see if your plan supports sending of international SMS messages. If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)). Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation. If that does not fix things read the following articles:
http://support.apple.com/kb/TS4268
http://support.apple.com/kb/ts3367 -
I am not much of a computer technician. I bought a time capsule thinking I could use this for an external hard drive and keep my MAC hard drive free. Was I mistaken? Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??
Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??
TC was designed to backup your Mac. The TC literature is pretty clear about this:
If your Mac's hard drive has a problem....it will sooner or later....you can use your backup on the TC to rebuild your Mac.
But.....if you move all of your data to the TC from your Mac....you only have one version of that data now, and it is on the TC.
Have you thought about what will happen when....not if....the TC has a problem? Since the only version of your important data was on the TC, and the TC has failed......you lose all of your data.....because you have no backup.
A much better plan would be to add a USB or FireWire hard drive and connect it directly to your Mac. Move the data on your Mac over to the hard drive.
Then, the TC will backup both your Mac and the hard drive. So, you have original data on on one drive and backups on another drive.
That would be a minimum backup plan. Most of us have more than one set of backups. -
My iPhone does not have Facetime on it. I've tried going into restrictions, but there's a passcode that doesn't seem to be one that I've used before. Is it possible to reset the phone and then just restore a portion of the old information? I've tried several pass codes and now am locked out for an hour after being locked out for 5 minutes and then 15 minutes. It said that I had tried 7 pass codes prior to these, but I don't remember ever trying to get into restrictions before.
I've looked up other posts on this, and my phone was purchased in the US and does not have an AE in the model number.Help for forgotten passcode > iOS: Forgotten passcode or device disabled after entering wrong passcode
When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
Try a search > iOS: Understanding Spotlight Search -
Hi, I have had an LG Octane for 4 years and loved it. I used it for email, surfing the web and facebook. But 6 weeks ago I stopped getting text messages, I could send but not receive. I was told it was just worn out. So I ordered another Octane from ebay, and it wouldn't connect to the internet. I was told by Verizon that the software had been changed. So I ordered a NEW in Box Octane and I am having trouble with that too. Bing won't work, nothing will work that will enable me to download Verizon Opera mini that still works on my old phone. I have a smart phone with another number but I LOVE the Octane for daily use. Why will my old Octane work but I can't get a NEW one to. Verizon guys are stumped too:( Please help!! Thanks!
Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread. -
I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, the App Store is throwing error "The product distribution file could not be verified. It may be damaged or not signed".
Is there anything I should do differently? Is anyone else facing the same issue?
Kindly help.Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
my iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!
yours sincerly
jackfromsurreyWhat I am saying is ..........
The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship with the Carrier and then follow the Carrier's process to unlock
With a PAYG it usually means adding a specified (by the carrier ) amount usually £15 /£20 depending on the carrier
This is how O2 function and according to Gemma this is how Vodafone work -
I erase my mac book pro to factory setting and cannot re-install the software. I received a message saying my Apple ID has not yet used with the App store. Please review your account information. Could anyone help please. I need to re-install my os.
Use Internet Recovery. You shouldn't need an AppleID. http://support.apple.com/kb/ht4718
Internet Recovery will install the OS that shipped with the Mac. You can then upgrade to Mavericks if that was not it.
Do you have an App Store account? Did you ever use it to install the OS?
Maybe you are looking for
-
How to connect linksys wrt120n with ubee modem+router on twc.
Hi, I have a twc connection with a ubee modem+router, it keeps on dropping connection all the time, i googled about it and came to know that if we just use the ubee device as a modem and install our own router along with it, it works fine. I have a l
-
Hello. So am I missing something, or does flar create totally ignore data ZFS file systems? I'm using Solaris 10-10/08 ... Thanks.
-
Using iWeb to make a website, does it cost money to get it published?
-
'ntpdate' sets my time one hour slow?
The command: ntpdate rolex.usg.edu sets my clock one hour off. Right now, it's 9:51pm, but it says 8:51pm. I live in EST (St. Petersburg, FL), and in my rc.conf file, I have: HARDWARECLOCK="UTC" TIMEZONE=EST I don't think I'm missing anything else.
-
Hello, i have an usb modem for 3g internet, with the company Movistar in Argentina, the notebook has a ranure to insert a chip, but i insert it, and nothing happend, in the program of the connections, it says "banda ancha movil", but i cannot select