Impact of Deleting interface from ASA

Hi Everyone,
During our maintenance window i need to delete few interfaces from ASA.
In ASDM when i filter by these interface names i see many acl configured for these interfaces but ACL have different name as compare to interface
name.
If i delete the interface will it also delete all those ACLs and any object groups configured under interface subnets?
Or
What else will be deleted when i delete the interface from ASA?
Regards
MAhesh

You would have to re write that ACL entry as it will either be deleted or the reference to the inside interface will be deleted and the rest of the ACL will remain. When I tested it my ACL remained but the name of the interface was removed. As I mentioned I am testing this on an 8.4 box so it is possible that in newer versions this ACL will be deleted.
the access-group inside_access_in in interface inside command will be deleted once you delete the inside interface...actually you don't need to delete the inside interface for it to be deleted, you only need to remove the nameif command from the interface. once the nameif is removed from the interface, all commands that reference that name will also be deleted.
This is why I stated that you should assume that all commands that reference the name of the interface you are deleting will also be deleted. That would include, but not limited to, ACLs, NAT, Policy maps, and static routes...just to name a few.
Please remember to select a correct answer and rate helpful posts

Similar Messages

Deleting interfaces from class

hi to all
I am trying to delete interfaces from class . But it showing that "You cannot perform this action in modification/enhancement mode". where is the problem.
thank you

Hi,
This error comes up when the object you are trying to edit has original system as something else. This is a protection given by the modification assistant, so that the changes to the objects are recorded. If you know what you are doing(modifying objects in non-original system), go to edit menu and select modifications and select "switch off modification assistant".
Regards,
Arun Prakash

Renaming proto files in the browser interface deletes them from my ipad.

Step 1. Create a new proto project, on your ipad. It defaults its name to "Project 2".
Step 2. Add some drawings/text/what ever, just to have something in it.
Step 3. Go back to the "home screen" (top left arrow) to see your samples folder, and the "project 2" listed.
Step 4. Watch it sync to the cloud.
Step 5. Go to https://creative.adobe.com/files and see your project 2 listed there.
Step 6. Rename "Project 2" to something more sensible, like "This is my awesome client project" or, you know, what ever you need to call it, so you know what it is.
Step 7. Go back to your ipad, watch Proto "sync", and the project you just created, vanishes from Proto, meaning you can't work on it any more.
Asking proto to sync, doesn't retrieve it from creative cloud, and now its just on creative cloud, how ever you left it, and I can't figure out how to get it back on my ipad.
This... is a pretty serious bug.
It appears the act of renaming it deletes it from the ipad.

Yes this is a bug.
A workaround is to rename the file on the web to anything with '.proto' on the end. It will then re-appear on your iPad.

Error while deleting Interface

Hi all
I have a ODI interface which I need to delete. But when I do right click > delete ... I get an error message 'Error while deleting'. The details shows the following.
Please help me if you can
java.sql.SQLException: ORA-00923: FROM keyword not found where expected
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_describe(T4CPreparedStatement.java:503)
at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:965)
at oracle.jdbc.driver.T4CPreparedStatement.execute_maybe_describe(T4CPreparedStatement.java:535)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1051)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3026)
at com.sunopsis.l.r.b(r.java)
at com.sunopsis.l.r.a(r.java)
at com.sunopsis.l.r.a(r.java)
at com.sunopsis.l.r.a(r.java)
at com.sunopsis.l.r.a(r.java)
at com.sunopsis.l.e.a(e.java)
at com.sunopsis.l.f.a(f.java)
at com.sunopsis.l.a.a(a.java)
at com.sunopsis.l.a.a(a.java)
at com.sunopsis.dwg.DwgObject.f(DwgObject.java)
at com.sunopsis.dwg.DwgObject.a(DwgObject.java)
at com.sunopsis.dwg.DwgObject.deleteAction(DwgObject.java)
at com.sunopsis.dwg.DwgObject.a(DwgObject.java)
at com.sunopsis.dwg.DwgObject.deleteAction(DwgObject.java)
at com.sunopsis.dwg.DwgObject.a(DwgObject.java)
at com.sunopsis.dwg.DwgObject.deleteAction(DwgObject.java)
at com.sunopsis.dwg.DwgObject.a(DwgObject.java)
at com.sunopsis.dwg.DwgObject.a(DwgObject.java)
at com.sunopsis.dwg.DwgObject.delete(DwgObject.java)
at com.sunopsis.dwg.DwgObject.delete(DwgObject.java)
at com.sunopsis.graphical.g.d.c(d.java)
at com.sunopsis.graphical.g.d.a(d.java)
at com.sunopsis.graphical.s.m.actionPerformed(m.java)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.jidesoft.plaf.vsnet.VsnetMenuItemUI.doClick(Unknown Source)
at com.jidesoft.plaf.vsnet.VsnetMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
thanx
Sam

It's about underlying SQL. If your working repository is on Oracle you can try something like this:
- connect to your work repository
- try deleting interface
- if it fails look into v$sqlarea for your query
- paste it here

Can't SSH to inside interface on ASA

Hi there
I have generated the key and can ssh to outside interface. I have allowed access on inside interface. I can telnet but not ssh. I captured packets and can see incoming only. Any ideas?
TIA
Sent from Cisco Technical Support iPhone App

Hi there,
Here it is -
asa01(config)# sh cap capin
4 packets captured
   1: 21:59:03.583343 802.1Q vlan#240 P0 192.168.1.2.56686 > 192.168.1.1.22: S 2251599477:2251599477(0) win 4128
   2: 21:59:05.586990 802.1Q vlan#240 P0 192.168.1.2.56686 > 192.168.1.1.22: S 2251599477:2251599477(0) win 4128
   3: 21:59:09.588577 802.1Q vlan#240 P0 192.168.1.2.56686 > 192.168.1.1.22: S 2251599477:2251599477(0) win 4128
   4: 21:59:17.591659 802.1Q vlan#240 P0 192.168.1.2.56686 > 192.168.1.1.22: S 2251599477:2251599477(0) win 4128
4 packets shown
asa01(config)#
asa01(config)# sh cap asp
0 packet captured
0 packet shown
asa01(config)#
Can you ping the Switch interface from the ASA?          - Yes
Can you ping the ASA from the switch? - Yes

IPSec tunnel on sub-interface on ASA 5510

Hello All,
I working on a security solution using ASA firewall and need some technical advice on ASA. Is it possible to setup a IPSec tunnels on each subinterface of a physical interface on ASA 5510?
I would be greatul if someone please reply post this with some details.
Regards,
Muds

Hi Jennifer,
Thanks very much for your reply. I understand where you coming from, but the reason of using sub-interfaces is that, we have only one physical interface on the firewall connected to the MPLS cloud, and we need to setup a seperate IPSec tunnels for each client for security and integrity. In the current scenario, I have static peers and we can easily setup a static route to peer address.
Many thanks for your assistance, please feel free to to advise if you have any other suggestion.
Regards,
Muds

SSH on Outside interface on ASA 5510

Hi All,
I need the ssh access on my ASA outside interface and have added
ssh ipremoved 255.255.255.255 outside
access-list acl_outside extended permit tcp host ipremoved any eq 22
but this is the log i get from ASA
Oct 06 2012 16:10:04: %ASA-3-710003: TCP access denied by ACL from ipremoved/39884 to outside:ipremoved/22
Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(5)
can someone please help me
many thanks
cheers..

many thanks for the quick reply
my connection is something like below
Site A Site B
PC--10.6.40.148 ---- ASA public IP -------------cloud --------------------public IP ASA
Site to Site IPsec VPN
Am able to ssh to the ASA on the private ip management interface, now i need to ssh to the site B public IP to manage
I have allowed the acl on site A ASA for the PC to go i can see the hit count on it
The reason being i need to manage the Site B ASA on public because on Site A am changing the internet provider and so if i have the acces to site B ASA i can change the peer IP to new IP and reestablish the VPN
many thanks for the help
cheers

Interface on asa.

Hi ,
I have connected a firewall inside interface to l3 switch.
on l3 switch
int gi0/1
no switchport
ip address 192.168.10.1 255.255.255.0
no shut
on firewall
int gi0/1
nameif inside
security level 100
ip address 192.168.10.2 255.255.255.0
If i ping to 192.168.10.2 from firewall thus it ping.
As i know inside host can ping to inside interface.But not any opposite interface such as dmz etc.(need access-list)

Hi Prashant,
Here are two things involved.
1. Ping to the far end interface.
The ASA will not allow to ping the far end interface, for example is you are a host connected on the Inside network and ping the Inside interface the ASA will reply, but if you try to ping the DMZ interface from a host on the inside this will not answer and is expected.
2. Permit traffic from lower to higer interfaces.
All the traffic from higher interface level to lower interface level is permitted by default but is deny the other way around, from lower to higher.
If you need to permit traffic from lower to higher you need to enter a access-list on the lower level interface to permit traffic to the higher security level (If you are on version 8.2 or earlier you might need to add a NAT rule)
For example:
Inside security level 100
Outside security level 0
Inside host 192.168.1.1
access-list outside_access_in permit ip any host 192.168.1.1
access-group outside_access_in in interface outside
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806745b8.shtml
I hope these helps.
Regards
Godfrey

Delete photo from iPhoto library and HDD

Hopefully I'm not repeating a previous thread...
Not being an expert, am I correct in saying that iPhoto only changes its version of the photo when editing it?
Also, if you delete the photo by moving it to the trash can, it doesn't physically delete it from the HDD? (When you empty the trash can)
This causes a problem for a few reasons.
I have just loaded Medialink PS3 which allows the iMac to serve the PS3. (BTW - Good product)
If you point Medialink to the original HDD folder then this still includes photos I thought I had deleted.
Also If I want to burn a cd with the photo folder external to iPhoto , the "deleted" photos are also burnt.
I copied all of the photos from a windows PC, and Picasa allowed you to physically delet from its own folder as well as the HDD.
Doesn't iPhoto 09 allow this?
What would iPhoto do if I went through and cleaned up the external folder and deleted jpgs or edited using Canon editing software? If using the external editor, would iPhoto reflect the changes?
Sorry if this is verbose.
regards,

You might want to have a llook at the iPhoto tutorials. They cover a lot of these basics.
http://www.apple.com/ilife/tutorials/#iphoto-hero
And the version of iPhoto you are using?
I'm not at all sure that a Referenced Library is what you want. In fact I strongly recommend against it. But however:
*How to do it:*
Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
*What Happens:*
Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
*Some things to consider:*
1. Importing and deleting pics are more complex procedures. You have to to put the files where they will be stored before importing them. When you delete them you'll need to remove the files from the HD yourself.
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
4. Because iPhoto has no tools for managing Referenced Files, if, for some reason, the path to the photos changes then you could find yourself resolving aliases for +each photo in the Library+ one by one.
My own opinion:
I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers
If disk space is an issue, you can run an entire iPhoto Library from an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
If you're concerned about accessing the files, There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
+Some Other Comments+
iPhoto will not touch any file outside its library. Period.
It will copy files on import and leave existing files untouched,
It will delete files within the Library but not outside the Library.
When you choose to go with a Referenced Library you are deciding that You want to manage the Files. You want to import them from the camera, you want to sort them however you want and you want to delete them yourself. That's the point of a referenced Library.
I just did a test by editing a photo using Canon Professional and the changes were not reflected in iPhoto. And vise versa.
The point of iPhoto is that you interface with your Photos via the Application. Like Addressbook for your contacts, iTunes for your Music, it's the go-to app for your Photos.
So, you want to edit Photos, you go to iPhoto and use the External Editor:
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Note that iPhoto sends a copy+ of the file to Photoshop, so when you save be sure to use the Save command, not Save As... If you use Save As then you're creating a new file and iPhoto has no way of knowing about this new file. iPhoto is preserving your original anyway.
Regards
TD

How do you delete file from time machine back up?

How do you delete file from time machine back up?

This from Apple KB Article If Time Machine is not in your Dock, you can enter Time Machine from the Menu Bar or System Preferences.
Deleting data from a Time Machine backup
To delete all backups of one or more items from a Time Machine backup, follow these steps:
Click the Time Machine icon on your Dock to enter the Time Machine restore interface.
Click on the item you would like to delete. Command-click to select multiple items.
Control-click (or right click) the highlighted item(s) and select "Delete All Backups of..." from the contextual menu, or select "Delete all backups of..." from the Action Item menu.
Authenticate with an administrator password when prompted.

Unable to delete rows from Target.

Hello everyone,
I am unable to delete rows from target data store. Here is what I have done.
Source Oracle 10g - staging 11g - Target Oracle 11g
I have implemented consistent set CDC on data model in staging and added 2 tables to CDC and turned on the journals . Both tables A and B are joined together via Column E (primary key of table A). Table A is the master table(has foreign key). Table B is child table. Target column consists of all the columns of both table A and B.
Following is what I am able to do and not to do
ABLE TO DO. If data is inserted into both or any of journalized tables I can successfully load the same in target by performing following steps. 1. Extend the consistency window at model level. Lock subscriber. Run the interface with any source table marked as Journalized data only. Unlock subscriber and purge journal.
ABLE TO DO. If data is updated in any of the journalized table, along with the steps mentioned above I can execute two interfaces. In one Interface table A marked as journalized data only Joined with table B and in second interface table B marked as Journalized data only joined to table a.
NOT ABLE TO DO If data is deleted from one or both tables it shows up as journalized data in JV$D<tablename> marked as D with date and subscriber name but when i run the interface by extending the window , locking subscriber executing both interfaces, unlock subscriber purge journals. no change takes place is Target. After unlocking subscriber step, journalized data gets removed from JV$D view. Please let me know what I am doing wrong here. How can rows delted from source can also be deleted from TARGET?
NOTE : In the flow table SYNC_JRNL_DELETES is YES
In moel under jounalized table tab Table have following order Table A folloed by Table B
Thanks in advance
Greenwich

Sorry I still do not get it. when you say "Its a legacy app", are you talking about the VB.NET app ?
If so then I repeat my self :-) Why not to connecting to the SQL server directly?
* even if you need information from several databases (for example ACCESS + SQL Server), in most cases, it is much better to connect directly and get each information to the app. Then in your app you can combine the information and analyse it
[Personal Site] [Blog] [Facebook]
Access app is the legacy app.

Not able to telnet or ssh to outside interface of ASA and Cisco Router

Dear All
Please help me with following question, I have set up testing lab, but still not work.
it is Hub and spoke site to site vpn case, connection between hub and spoke is metro-E, so we are using private ip for outside interface at each site.
Hub -- Juniper SRX
Spoke One - Cisco ASA with version 9.1(5)
spoke two - Cisco router with version 12.3
site to site vpn has been successful established. Customer would like to telnet/ssh to spoke's outside ip from Hub(using Hub's outside interface as source for telnet/ssh), or vise versa. Reason for setting up like this is they wants to be able to make configuration change even when site to site vpn is down. Sound like a easy job to do, I tried for a long time, search this forum and google too, but still not work.
Now I can successfully telnet/ssh to Hub SRX's outside interface from spoke (ASA has no telnet/ssh client, tested using Cisco router).
Anyone has ever done it before, please help to share your exp. Does Cisco ASA or router even support it?
When I tested it, of cause site to site vpn still up and running.
Thanks
YK

Hello YK,
On this case on the ASA, you should have the following:
CConfiguring Management Access Over a VPN Tunnel
If your VPN tunnel terminates on one interface, but you want to manage the ASA by accessing a different interface, you can identify that interface as a management-access interface. For example, if you enter the ASA from the outside interface, this feature lets you connect to the inside interface using ASDM, SSH, Telnet, or SNMP; or you can ping the inside interface when entering from the outside interface. Management access is available via the following VPN tunnel types: IPsec clients, IPsec LAN-to-LAN, and the AnyConnect SSL VPN client.
To specify an interface as a mangement-only interface, enter the following command:
hostname(config)# management access management_interface
where management_interface specifies the name of the management interface you want to access when entering the security appliance from another interface.
You can define only one management-access interface
Also make sure you have the pertinent configuration for SSH, telnet, ASDM and SNMP(if required), for a quick test you can enable on your lab Test:
SSH
- ssh 0 0 outside
- aaa authentication ssh console LOCAL
- Make sure you have a default RSA key, or create a new one either ways, with this command:
*crypto key generate rsa modulus 2048
Telnet
- telnet 0 0 outside
- aaa authentication telnet console LOCAL
Afterwards, if this works you can define the subnets that should be permitted.
On the router:
!--- Step 1: Configure the hostname if you have not previously done so.
hostname Router
!--- aaa new-model causes the local username and password on the router
!--- to be used in the absence of other AAA statements.
aaa new-model
username cisco password 0 cisco
!--- Step 2: Configure the router's DNS domain.
ip domain-name yourdomain.com
!--- Step 3: Generate an SSH key to be used with SSH.
crypto key generate rsa
ip ssh time-out 60
ip ssh authentication-retries 3
!--- Step 4: By default the vtys' transport is Telnet. In this case,
!--- Telnet and SSH is supported with transport input all
line vty 0 4
transport input All
*!--- Instead of aaa new-model, the login local command may be used.
no aaa new-model
line vty 0 4
login local
Let me know how it works out!
Please don't forget to Rate and mark as correct the helpful Post!
David Castro,
Regards,

Is there any BAPI or function module to delete entries from a table (VBAK)

Hi Everybody,
this is my first thread in SDN...
my problem follows...
A report is be created that selects all sales orders created by e-Sales that are more than 20 minutes old and still have a delivery block:
tables:
VBAK     sales document: header data
selection fields:
VBAK-LIFSK      ≠     <BLANK>
VBAK-ERNAM     =     userID used by e-Sales / IVE
          (EP-BATCH / EAI-BATCH)
VBAK-ERDAT      <=     Current system Date
VBAK-ERZET     <=     Current system Time - 20 minutes
These orders should be deleted from SAP system.
This report should be scheduled to run regularly every 10 minutes.
my doubt : is ther any BAPI or Function module to delete entries from a standard table...if no what is the way to delete the enteries from a std table...
best replies will be rewarded....
regards
Reddy

Hi Vasanth ,
thanks for your reply.
i tried in the same manner what u mentioned.
but how to pass only one parameter to the functionmodule..
here in this case we have to pass only update flag as 'D'..
i did the same it giving dump..
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
The call to the function module "BAPI_SALESORDER_CHANGE" is incorrect:
In the function module interface, you can specify only
fields of a specific type and length under "ORDER_HEADER_INX".
Although the currently specified field
"INT_ORDER_HEADER_INX" is the correct type, its length is incorrect.
my pgm :
*& Report YNEW_ORDER_DELETION
REPORT ynew_order_deletion.
TABLES:vbak.
PARAMETERS:
     p_lifsk LIKE vbak-lifsk DEFAULT '02'.
SELECT-OPTIONS:
   s_lifsk FOR vbak-lifsk DEFAULT '10',
    s_ernam FOR vbak-ernam,
    s_erdat FOR vbak-erdat,"DEFAULT sy-datum.
    s_erzet FOR sy-uzeit.
*PARAMETERS:
p_erzet LIKE sy-uzeit.
   s_erdat like vbak-erdat,
   s_erzet like vbak-erzet.
DATA:
   BEGIN OF int_final OCCURS 0,
        w_vbeln TYPE vbak-vbeln,
   END OF int_final.
DATA:
int_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: int_order_header_inx LIKE bapisditmx OCCURS 0 WITH HEADER LINE.
DATA:
wf_time TYPE sy-uzeit.
INITIALIZATION.
s_ernam-low = 'KULKARMA'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
s_ernam-low = 'EAI-BATCH'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
wf_time = sy-uzeit - 1200.
p_erzet = sy-uzeit - 1200.
p_erzet-low = wf_time.
APPEND s_erzet.
int_order_header_inx-updateflag = 'D'.
APPEND int_order_header_inx.
START-OF-SELECTION.
SELECT vbeln FROM vbak
                   INTO TABLE int_final
                   WHERE lifsk EQ p_lifsk
                     AND ernam IN s_ernam
                     AND erdat IN s_erdat
                     AND erzet IN s_erzet.
IF sy-subrc = 0.
    LOOP AT int_final.
      CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
        EXPORTING
          salesdocument         = int_final-w_vbeln
ORDER_HEADER_IN             =
    order_header_inx            = int_order_header_inx
SIMULATION                  =
BEHAVE_WHEN_ERROR           = ' '
INT_NUMBER_ASSIGNMENT       = ' '
LOGIC_SWITCH                =
NO_STATUS_BUF_INIT          = ' '
        TABLES
          return                      = int_return
ORDER_ITEM_IN               =
ORDER_ITEM_INX              =
PARTNERS                    =
PARTNERCHANGES              =
PARTNERADDRESSES            =
ORDER_CFGS_REF              =
ORDER_CFGS_INST             =
ORDER_CFGS_PART_OF          =
ORDER_CFGS_VALUE            =
ORDER_CFGS_BLOB             =
ORDER_CFGS_VK               =
ORDER_CFGS_REFINST          =
SCHEDULE_LINES              =
SCHEDULE_LINESX             =
ORDER_TEXT                  =
ORDER_KEYS                  =
CONDITIONS_IN               =
CONDITIONS_INX              =
EXTENSIONIN                 =
    ENDLOOP.
    LOOP AT int_return.
      WRITE:/ int_return-type,
              int_return-id,
              int_return-number,
              int_return-message.
    ENDLOOP.
ENDIF.
please help me ..its a very urgent issue to be solved...
am waiting for ur reply...
regards
gangareddy

How to delete message from the fodler of AOL account using Java mail

Hello All,
I am using Java MAil API in my application, i want to delete message from AOL account's folder,
when i set the folder as "Recently Deleted" or "Trash" , i get an exception as "folder does not exist".
when i tested , some times mail is moving into Recently Deleted folder, but not every time.
this is happening in both the interface as AOl Interface or my application.
when i use folder.close(true) after setting the flag of message as DELETED. it completely remove the message from the acount.
but i want to let the message be remained in the Recently Deleted folder. what should i do.
i dont want to remove the message completely from the account.I am using IMAP also.

You'll need to figure out what the real name of the "Recently Deleted" folder is on the AOL IMAP server
(assuming it's a real folder and not some sort of "virtual" folder), then copy the message into that folder.
See the folderlist.java demo program as a way to explore the names of all the folders on the server.

Deleting data from a table where there are no indexes on the table

Hi
We have one interface program for one time process.When I was testing the process it was taking too much time to load the data around 1000 records.
it happens in 2 steps
1 puts into stage table
2 puts into base table
in the process/package I have delete statement that deletes data from stage table before each process.
Stage table did not have any indexes but the base table has(obvisiosly)
any idea?
please help me on this.
Thanks,
Y

Hi,
Please post the application/database details along with the OS.
Is this interface program a seeded or custom one?
Please enable trace on this concurrent program as per (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12) and generate the TKPROF to find out why it takes that long to load/delete the data.
Thanks,
Hussein

Impact of Deleting interface from ASA

Similar Messages

Maybe you are looking for