Impdp error: ORA-02369

What's wrong:
F:\com\Export>impdp system/test@test full=y dumpfile=EXPDP_FULL:com_dp.dmp
logfile=EXPDP_FULL:fullimp_dp.log
Import: Release 11.1.0.7.0 - 64bit Production on Donnerstag, 30 Juli, 2009 14:56
:49
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Angemeldet bei: Oracle Database 11g Release 11.1.0.7.0 - 64bit Production
ORA-39002: Ung³ltiger Vorgang
ORA-31694: Master-Tabelle "SYSTEM"."SYS_IMPORT_FULL_01" konnte nicht geladen/ent
laden werden
ORA-02354: Fehler beim Exportieren/Importieren von Daten
ORA-02368: the following file is not valid for this load operation
ORA-02369: internal number in header in file F:\com\Export\com_dp.dmp is not val
id
roger

Roger,
Like everyone else here has already mentioned, this sounds like corruption. One way to verify is to try the import where the dumpfile was created. You can try this command and instead of creating objects, it will just write the ddl to a sqlfile.
impdp ...your normal command ... sqlfile=mytest.sql
If you don't get any errors here, then it has to do with how you got the dumpfile from the source to the target. This command will create a file called mytest.sql with all of the ddl that is contained in the dumpfile.
Hope this helps.
Dean

Similar Messages

Impdp error ORA 316931 29913, 31011, 19202

One of my colleague got this error while importing a database from dump and he passed it to me resolve the issue.
The import command used:
impdp raviuyre/systemcr DUMPFILE=3_dir:FITHA_0.dmp LOGFILE=import_0.log TABLES=SLATIONS TABLE_EXISTS_ACTION=APPEND*
Error:
Processing object type SCHEMA_EXPORT/TABLE/TABLE
ORA-39153: Table "RAVIUYRE"."SLATIONS" exists and has been appended. Data will be loaded but all dependent metadata will be skipped due to table_exists_action of append
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "RAVIUYRE"."SLATIONS" failed to load/unload and is being skipped due to error:
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00217: invalid character 133 (U0085)+
Error at line 1
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Is the below error
ORA-31693: Table data object "RAVIUYRE"."SLATIONS" failed to load/unload and is being skipped due to error:
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00217: invalid character 133 (U0085)+
caused because of the table which has been appended.
Kindly help me.....
Thanks in advance,
NONUDAY

897910 wrote:
Hi Srini,
I found out that this database has a character set WE8MSWIN1252 which doesn't support XML type.Pl elaborate on how you determined this. I am not an expert in XML types, but I do not think support is related to NLS_CHARACTERSET.
>
SQL> select * from nls_database_parameters where parameter ='NLS_CHARACTERSET';
PARAMETER                      VALUE
NLS_CHARACTERSET               WE8MSWIN1252
Is above the character set is reason for the error, if yes can you tell me how can I change the WE8MSWIN1252 to AL32UTF8(supports XML)?
Thanks for your inputs..
Regards,
KarthikFor changing charactersets, pl see these MOS Docs
Changing the NLS_CHARACTERSET to AL32UTF8 / UTF8 (Unicode)          [Document 260192.1]
AL32UTF8 / UTF8 (Unicode) Database Character Set Implications          [Document 788156.1]
HTH
Srini

Impdp error ORA-39125: Worker unexpected fatal error in KUPW$WORKER.PUT_DDL

Hi,
I am trying to generate sql script form the dmp file.
but getting this error.
C:\Documents and Settings\satish.HTSS>impdp egift/egift@local directory=DIR1 dum
pfile=exp.dmp sqlfile=create.sql
Import: Release 10.2.0.1.0 - Production on Saturday, 24 May, 2008 0:16:07
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Master table "EGIFT"."SYS_SQL_FILE_FULL_01" successfully loaded/unloaded
Starting "EGIFT"."SYS_SQL_FILE_FULL_01": egift/********@local directory=DIR1 du
mpfile=exp.dmp sqlfile=create.sql
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type SCHEMA_EXPORT/TABLE/COMMENT
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_SPEC
Processing object type SCHEMA_EXPORT/FUNCTION/FUNCTION
Processing object type SCHEMA_EXPORT/PROCEDURE/PROCEDURE
Processing object type SCHEMA_EXPORT/PACKAGE/COMPILE_PACKAGE/PACKAGE_SPEC/ALTER_
PACKAGE_SPEC
Processing object type SCHEMA_EXPORT/FUNCTION/ALTER_FUNCTION
Processing object type SCHEMA_EXPORT/PROCEDURE/ALTER_PROCEDURE
Processing object type SCHEMA_EXPORT/VIEW/VIEW
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
Processing object type SCHEMA_EXPORT/TABLE/TRIGGER
ORA-39125: Worker unexpected fatal error in KUPW$WORKER.PUT_DDLS while calling D
BMS_METADATA.CONVERT []
ORA-06502: PL/SQL: numeric or value error
LPX-00007: unexpected end-of-file encountered
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 6235
----- PL/SQL Call Stack -----
object      line object
handle    number name
20B135F8     14916 package body SYS.KUPW$WORKER
20B135F8      6300 package body SYS.KUPW$WORKER
20B135F8     12279 package body SYS.KUPW$WORKER
20B135F8      3279 package body SYS.KUPW$WORKER
20B135F8      3956 package body SYS.KUPW$WORKER
20B135F8      6931 package body SYS.KUPW$WORKER
20B135F8      1262 package body SYS.KUPW$WORKER
18E96684         2 anonymous block
Job "EGIFT"."SYS_SQL_FILE_FULL_01" stopped due to fatal error at 00:16:31and this error always comes when it turns to generate sql for the triggers.
i am facing this error continuously.
thanks

Hi,
Its an unpatched db.So you must patch it first.Here is what is mentioned about this error
39125, 00000, "Worker unexpected fatal error in %s while calling %s [%s]" // *Cause: An unhandled exception was detected internally within the worker
// process for the Data Pump job while calling the specified external
// routine. This is an internal error. Additional information may be
// supplied.
// *Action: If problem persists, contact Oracle Customer Support.
So the better part is to contact Support.See if this thread can help you.Its not having much but still ,
Error ORA-39125 and ORA-04063 during export for transportable tablespace
Aman....

IMPDP Errors ORA-39083 ORA-01918

Oracle Database 10.2
OS IBM AIX
Hi
I have to do one datapump import into one database. The source database is different.
The dumpfile contains 3 different schemas. And I need to import into one schema with a different name.
For example, Export dump contains AB, CD and EF.
I need to import only EF user into new database and it should become MN.
I have used remap_schema=EF:MN
The following is the import parfile.
userid='/ as sysdba'
directory=DF_DUMP
dumpfile=AMRC%U.dmp
remap_schema=EF:MN
remap_tablespace=RM100:TS100
remap_tablespace=DATA100:DATA300
job_name=MNIMPORT
logfile=MNIMPORT.log
parallel=4
I have started the import. But I see the below errors
ORA-39083: Object type TABLE failed to create with error:
ORA-01918: user 'AB' does not exist
Failing sql is:
CREATE TABLE
After this, import of MN has begun.
How to resolve the below error ? What is the reason for this error ? What changes are needed in parfile ?

Three errors
- You didn't look up the error messages in the online documentation.
- impdp by default imports the entire file (Full=y). You need the SCHEMAS= clause
- expdp and impdp shouldn't be run as SYS
All in all you could have found the answer very easily in the online documentation.
Please avoid asking redundant questions in the future.
Sybrand Bakker
Senior Oracle DBA

Impdp triggers always give error ORA-04071:missing BEFORE, AFTER or INSTEAD

Hello,
I am using 11g impdp to create a test system.
I use this cmd to import
impdp 'SYS/xxxxx@PWRFUN AS SYSDBA' dumpfile=PWRPROD.DMP logfile=PWRFUNimportPROD.log SCHEMAS=pwrplant TABLE_EXISTS_ACTION=REPLACE
Then I get this error for all the triggers
ORA-39083: Object type TRIGGER failed to create with error:
ORA-04071: missing BEFORE, AFTER or INSTEAD OF keyword
Failing sql is:
CREATE TRIGGER "PWRPLANT"."APPROVAL_STEPS_HISTORY" PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
FOR EACH ROW
BEGIN    :new.user_id := USER;    :new.time_stamp := SYSDATE; END;
As you can see, the trigger does contain the word "before".
When I remove " "PWRPLANT"."APPROVAL_STEPS_HISTORY" " and run the trigger below, it compiles correctly. Why is this, and how do I make my impdp to run correctly?
CREATE TRIGGER PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
FOR EACH ROW
BEGIN    :new.user_id := USER;    :new.time_stamp := SYSDATE; END;

same error, thanks for your attemp
Error starting at line 1 in command:
CREATE TRIGGER "PWRPLANT"."APPROVAL_STEPS_HISTORY" PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
REFERENCING new AS new
FOR EACH ROW
BEGIN :new.user_id := USER; :new.time_stamp := SYSDATE; END;
Error report:
ORA-04071: missing BEFORE, AFTER or INSTEAD OF keyword
04071. 00000 - "missing BEFORE, AFTER or INSTEAD OF keyword"
*Cause:    The trigger statement is missing the BEFORE/AFTER/INSTEAD OF clause.
*Action:   Specify either BEFORE, AFTER or INSTEAD OF.

Impdp Procedure or function 10.2.0.4 Error ORA-00904

I have error ORA-00904: "USERNAME" : identificateur non valide. What is the problem ?
My command impdp :_
**impdp datapump/password@%ORACLE_SID% DIRECTORY=datapump schemas=gcom INCLUDE=PROCEDURE remap_tablespace=gpao_indx:indx remap_tablespace=gpao_data:data DUMPFILE=%ORA_DUMPFILE% LOGFILE=Imp_%annee%%mois%%jour%%hh%%min%%sec%_%ORACLE_SID%.log**
The result :_
Import: Release 10.2.0.4.0 - Production on Jeudi, 15 Septembre, 2011 17:47:16
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connecté à : Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Table maître "DATAPUMP"."SYS_IMPORT_SCHEMA_29" chargée/déchargée avec succès
Démarrage de "DATAPUMP"."SYS_IMPORT_SCHEMA_29" : datapump/********@gpao DIRECTORY=datapump schemas=gcom INCLUDE=PROCEDURE remap_tablespace=gpao_indx:indx remap_tablespace=gpao_data:data remap_tablespace=gpao_temp:TEMP DUMPFILE=GPAO_DATAPUMP.DUMP LOGFILE=Imp_20110915174715_gpao.log TABLE_EXISTS_ACTION=replace
Traitement du type d'objet DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
Traitement du type d'objet DATABASE_EXPORT/SCHEMA/PROCEDURE/PROCEDURE
ORA-06502: PL/SQL : erreur numérique ou erreur sur une valeur: tampon de chaîne de caractères trop petit
ORA-01001: curseur non valide
ORA-06512: à "SYS.KUPW$WORKER", ligne 5241
ORA-06512: à "SYS.KUPW$WORKER", ligne 12750
ORA-01001: curseur non valide
ORA-00904: "USERNAME" : identificateur non valide
Tâche "DATAPUMP"."SYS_IMPORT_SCHEMA_29" arrêtée en raison d'une erreur grave à 17:47:35
Tkprof result :_
[http://wattman44.dnsalias.net/telechargement/result_2844.txt]

Refer MOS note 814896.1
Since it is not describing your exact scenario, I would advise you to get in touch with Oracle support for this.

Impdp errors with ORA-01400: cannot insert NULL into

Hi Experts,
I have very intresting situation when I use impdp to import table back to DB.
Environment:
Database Server: 10.2.0.4 Enterprise
OS: RHEL 5.5 64-bit
We have a table and it's size is 350+ GB and so to reclaim space I want to perform expdp/impdp operation. When I following below steps:
1) expdp table
2) drop table
3) impdp full table
It works like a charm and I am able to reclaim 83% space and table size shows about 20GB.
But when I follow below method:
1) expdp table
2) truncate table (To save some time not to import indexes, stats, constraints , etc)
3) impdp table
I get following error:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYS"."SYS_IMPORT_TABLE_01" successfully loaded/unloaded
Starting "SYS"."SYS_IMPORT_TABLE_01": sys/******** tables=<schema>.<table_name> directory=test_dir dumpfile=<table_name>_%u.dmp logfile=impdp_<table_name>.log parallel=16 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "<schema"."table_name" failed to load/unload and is being skipped due to error:
ORA-01400: cannot insert NULL into ("schema"."table_name"."ID")
Job "SYS"."SYS_IMPORT_TABLE_01" completed with 1 error(s) at 16:12:28
Please advise how to proceed further, it seems like I am hitting some sort of Bug but metalink does not show any.
Regards,
MS
Edited by: user10651321 on Nov 9, 2012 4:38 PM

expdp and impdp operations should not be executed as SYS - try SYSTEM account instead. See first Note section here - http://docs.oracle.com/cd/B19306_01/server.102/b14215/dp_import.htm#sthref243
Pl post the complete expdp and impdp commands used, along with a description of the table for which you encounter this error.
HTH
Srini

Impdp with error ORA-39083,ORA-00942,ORA-00959,ORA-39112,help!!!

Hi,Friends,
I did import a dump file, should be a schema by data pump.Got these errors:
ORA-39083: Object type TABLE failed to create with error
followed error:
ORA-00942: table or view does not exist
or
ORA-00959: tablespace 'USERS2' does not exist
ORA-39112: Dependent object type %s skipped, base object type %s creation failed ORA-39082: Object type created with compilation warnings
Would anybody here can help me out?Thanks!

Either pre-create the users2 tablespace in the target database, or use remap_tablespace parameter to specify the target tablespace instead of users2.
As usual, complete syntax is in the doc - http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_import.htm#sthref342

Impdp error while attaching the job - Urgent - Prod batches are stopped

I am getting following error, when I invoke the following command.
impdp "'/ as sysdba'" attach ="SYS"."SYS_IMPORT_TABLE_01"
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORA-39006: internal error
ORA-39065: unexpected master process exception in DISPATCH
ORA-44003: invalid SQL name
ORA-39097: Data Pump job encountered unexpected error -44003
The actual import job was stopped with stop_job in impdp> prompt.
DB Version: 10.2.0.2.
Please throw some lights to fix this issue. Production batches are already on hold. It is very urgent.

I can't remember the number of the bug sorry, but i haven't the same issue and I had to update to 10.2.0.3.0 (I opened a SR before in my previous company when i worked)

While import the table i got error "ORA-39166"

I got error "ORA-39166: Object XXXXXXX_030210 was not found." while importing.
Edited by: AshishS on 03-Feb-2012 04:37

Pl post details of OS and database versions, along with the complete impdp command used and the sections from the log file where this error occurs.
HTH
Srini

Datapump 11g impdp error for HR_ORGANIZATION_INFORMATION

Hello all,
I am encountering an error when executing impdp on a clone environment. The following error appears in the log for the table HR_ORGANIZATION_INFORMATION.
ORA-31693: Table data object "HR"."HR_ORGANIZATION_INFORMATION" failed to load/unload and is being skipped due to error:
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-20001: System Error: Procedure hr_organization.insert_bus_grp_details at Step 1
Cause: The procedure hr_organization.insert_bus_grp_details has created an error at Step 1.
Action: Contact your system administrator quoting the procedure hr_organization.insert_bus_grp_details and Step 1.
the script being used to import is:
impdp system/manager DIRECTORY=IMPDP_DIR dumpfile=prod_exp.dmp LOGFILE=prod_imp.log SCHEMAS=applsys,po,hr,inv,zx,ce,fa,ap,ar,gl,eul_us,xxodi EXCLUDE=grant TABLE_EXISTS_ACTION=truncate
Can anyone help for this issue?
Thanks,
Vikram

>
impdp system/manager DIRECTORY=IMPDP_DIR dumpfile=prod_exp.dmp LOGFILE=prod_imp.log SCHEMAS=applsys,po,hr,inv,zx,ce,fa,ap,ar,gl,eul_us,xxodi EXCLUDE=grant TABLE_EXISTS_ACTION=truncate
>
AFAIK, importing of individual schemas or a subset of schemas is not supported (due to the relational integrity between various schemas/tables). The import process itself may work, but it will leave the database in a functionally corrupted state. Only a complete database import/export is supported.
Pl identify the database and OS versions.
HTH
Srini

Impdp errors

Hello all,
I want to do a full impdp but im getting many errors.
im using
impdp user/password@database directory=DATA_PUMP_DIR
FULL=Y
dumpfile=EXPORT.DMP
im trying to do this in my laptop for test purpose. I am using 11.2.0.1.0 version.
1. cn i do this with sys user? IF im doing from sys user its giving me errors like
ORA-31625: Schema Example is needed to import this object, but is unaccessible
ORA-39083: Object type PACKAGE_BODY failed to create with error:
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
2. Whn im trying to do this with user with full imp privileges im gettin error.
ORA-31655: no data or metadata objects selected for job
ORA-39154: Objects from foreign schemas have been removed from import
Master table "ABC"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "ABC"."SYS_IMPORT_FULL_01": abc/******** directory=DATA_PUMP_DIR FULL=
Y DUMPFILE=ORCL.DMP
Job "ABC"."SYS_IMPORT_FULL_01" successfully completed at 11:42:49
please suggest how to over come this
In the laptop where im trying to do impdp I haven't created any directory structure,, no tablespaces, no users I jst installed oracle

im still not gettin nywher.......
as i mentioned this is a test machine so
no users, no tablespaces, no schemas are created in this test machine jst oracle has been installled.
Please suggest me what to be done next.
From the production DB i have taken the full=y expdp

Impdp errors at datafile ''

EXPDP FULL=Y then IMPDP FULL=Y
I Get these errors.. why is the datafile '' instead of the filename:
ORA-39083: Object type TABLESPACE failed to create with error:
ORA-03280: invalid DATAFILE filename specified
Failing sql is:
CREATE TABLESPACE "DEVOK" DATAFILE '' SIZE 5242880 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M,SIZE 5242880 AUTOEXTEND ON NEXT 1048
576 MAXSIZE 32767M,'+TS/osow/tempfile/temp_file3' SIZE 5242880 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M,SIZE 5242880 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M,SIZE 5242880 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M LOGGING ONLINE PERMANENT BLOCKSIZE 8192
EX
ORA-39083: Object type TABLESPACE failed to create with error:
EXPDP using Oracle Enterprise Database 11.2.0.2 at patch 12
IMPDP using Oracle Enterprise Database 11.2.0.3 at patch 22

fyi.. yes that was a great workaround..
I also found the cause of the issue..
11.2.0.3 Patch 22 has a bug in the impdp.. also has a bug in the create database from template.. and has a major critical bug in Oracle Spatial that is suppose to be fixed in patch 24..
I ended up reverting back to patch 15. impdp, templates, and spatial work fine there (although I have seen a minor bug in the SQL Tuner)
and will wait for patch 24 before attempting an upgrade again..

PLS-00201: identifier (impdp error)

Hi,
Os: IBM-AIX
Oracle 11.0.1.7.0
Command: impdp user/password directory=dbdir dumpfile=banko.dmp schemas=user logfile=impdp.log
I get the below error while importing a dumpfile
ORA-39083: Object type PROCACT_SCHEMA failed to create with error:
ORA-06550: line 2, column 1:
PLS-00201: identifier 'DBMS_CUBE_EXP.SCHEMA_INFO_IMP_BEG' must be declared
ORA-06550: line 2, column 1:
PL/SQL: Statement ignored
ORA-06550: line 3, column 1:
PLS-00201: identifier 'DBMS_CUBE_EXP.SCHEMA_INFO_IMP_LOOP' must be declared
ORA-06550: line 3, column 1:
PL/SQL: Statement ignored
ORA-06550: line 8, column 1:
PLS-00201: identifier 'DBMS_CUBE_EXP.SCHEMA_INFO_IMP_END' must be declared
ORA-06550: line 8, c
Please suggest me
Thanks
KSG

May be your target database is not having a OLAP support and your dump contains olap cubes.
Not sure may be you have to install dbms_cubes package by running following script.
{ORACLE_HOME}/olap/admin/olapiboo.plb
Hope this will help.

Not valid month Error Ora 01843

hi
This is an error while running a report 6i. in Oracle 8i Environment.
"Not valid month Error Ora 01843"
This report is working fine in Production. But it is not working in Development Database.
Development database is the image of Production system.
Any reason for this Error?

Dear Naseer C ,
We got similar experiences for several time.
We quried like that.
Selet moth from table;
08-AUG-1988
08-08-1988
08-08-88
We changed several time until diappear the message.
Hopefully, it will help you.
Best regards,
S!G

Impdp error: ORA-02369

Similar Messages

Maybe you are looking for