Impdp imported several MB but still 0 out of Nn million rows?!?

Thank you in advance for looking into this. I look forward to any help and insight you may be able to provide.
Has anyone run into this issue when data pump shows "nMB but 0 out of millions of rows" NOT imported?!? There are two tables in my import that do this. I have also encountered this error as well ORA-39166: Object was not found. Which seemed to be circumvented ONLY after setting the characterset. But now it cannot import data for two tables.
Here is the background.
The import was sent to me in two files. The ddl in one dump and the data in another. So I had to first create the DDL then import the data.
Create the ddl parameterfile and import the metadata.
Found the tablespaces from the source db.
I created a ddl file via impdp. remapped the tablespaces, created the users.
Import the data.
I set the character set env variable and used the following settings in the parameter file.
CONTENT=all
DUMPFILE=DATA_PUMP_DIR:FILE.%U.dmp
LOGFILE=DATA_FILE_DIR:FILE_20131126.log
ENCRYPTION_PASSWORD='PASSWORD'
REMAP_SCHEMA=SCHEMA1:SCHEMA
JOB_NAME=SCHEMA_NAME
table_exists_action=append
FULL=N
PARALLEL=9
So I begin the import and this is the result : (more than one table is not importing I showed two importing in my example however.)
. . imported "SCHEMA"."TABLE_01":"SYS_P597103"      663.4 MB       0 out of 32084160 rows
. . imported "SCHEMA"."TABLE_01":"SYS_P434333"      589.0 MB       0 out of 29672535 rows
. . imported "SCHEMA"."TABLE_01":"SYS_P635480"      656.6 MB       0 out of 32553771 rows
. . imported "SCHEMA"."TABLE_01":"SYS_P651574"      658.8 MB       0 out of 32960374 rows
. . imported "SCHEMA"."TABLE_01":"SYS_P460604"      626.5 MB       0 out of 30213168 rows
. . imported "SCHEMA"."TABLE_01":"SYS_P567240"      620.5 MB       0 out of 31071412 rows
. . imported "SCHEMA"."TABLE_01":"SYS_P577162"      633.1 MB       0 out of 31488125 rows
. . imported "SCHEMA"."TABLE_01":"SYS_P387361"      583.8 MB       0 out of 28632631 rows
. . imported "SCHEMA"."TABLE_01":"SYS_P402882"      592.3 MB       0 out of 28999710 rows
. . imported "SCHEMA"."TABLE_01":"SYS_P542284"      606.3 MB       0 out of 30659587 rows
. . imported "SCHEMA"."TABLE_01":"SYS_P366463"      567.9 MB       0 out of 27642766 rows
. . imported "SCHEMA"."TABLE_01":"SYS_P377498"      571.3 MB       0 out of 28178251 rows
. . imported "SCHEMA"."TABLE_01":"SYS_P339562"      608.0 MB       0 out of 26744122 rows
. . imported "SCHEMA"."TABLE_01":"SYS_P357772"      622.4 MB       0 out of 27225225 rows
. . imported "SCHEMA"."TABLE_02":"SYS_P578321" 234.1 MB 24498143 rows
. . imported "SCHEMA"."TABLE_02":"SYS_P578324" 240.2 MB 24498143 rows
. . imported "SCHEMA"."TABLE_01":"SYS_P192761"      449.9 MB       0 out of 21476694 rows
. . imported "SCHEMA"."TABLE_01":"SYS_P287781"      545.0 MB       0 out of 25607178 rows
. . imported "SCHEMA"."TABLE_01":"SYS_P336096"      558.2 MB       0 out of 26321351 rows
. . imported "SCHEMA"."TABLE_02":"SYS_P593408" 235.8 MB 24863112 rows
. . imported "SCHEMA"."TABLE_02":"SYS_P593423" 241.7 MB 24863112 rows
. . imported "SCHEMA"."TABLE_02":"SYS_P623103" 241.4 MB 25219732 rows
. . imported "SCHEMA"."TABLE_02":"SYS_P623104" 247.3 MB 25219732 rows
. . imported "SCHEMA"."TABLE_02":"SYS_P647262" 245.2 MB 25629915 rows
. . imported "SCHEMA"."TABLE_02":"SYS_P647342" 250.4 MB 25629915 rows
. . imported "SCHEMA"."TABLE_02":"SYS_P519883" 233.9 MB 23413438 rows

I responded to this post after I posted it because I found a solution. I'm not sure why I do not see it. Here it is:
1. Re: impdp imported several MB but still 0 out of Nn million rows?!?
OracleBarista Nov 30, 2013 9:43 PM (in response to OracleBarista)
interestingly enough i was able to apply the rows to both of these two tables if I did not set the NLS_LANG in the environment and import both of them together. That only worked for these two tables however.
I do see one thing I find interesting one table shows 73K rows but not data and zero count when I select rows. So obviously there is nothing there but I'm not sure why it's reporting rows. Any ideas?
Correct Answer
Helpful Answer
Here is my response to you (DK2010):
Sorry for the oversight should have been more thourough. The version the datapump export was sent to me in was 11.2.0.2 the version database I'm using is 11.2.0.1.
-- Futher response to my own post (pasted here). Further research proved my suspicion which was the table was not part of any DUMP file I was provided. I do not know why TOAD was showing it with 73K rows because SQL queries did not support that.
I believe this question can be closed.

Similar Messages

Why is it when i download the software update for iphone an error pops out when downloading is finish and processing file is being done...i've already tried several time but still the same result.

why is it when i download the software update for iphone an error pops out when downloading is finish and processing file is being done...i've already tried several time but still the same result.

Disasble the computer's security software during the download and update.

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

Thanks for the suggestion, Chris. I actually did not resolve the issue which is why i did not post an answer.
it turns out that my iphone seems to default to an incorrect User ID (it defaults to an @me account, which is not something that i have ever used).
even when i change the User ID in my settings for the iTunes store, it still appears when i attempt to get updates for my existing apps. however, it does seem to use the correct ID when i attempt to purchase new apps.
If someone actually had an answer to correct this, i would love to update my existing apps.
Thank you.

HT200169 Having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Sug

Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?

Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
Ian Turner wrote:
Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
Ian

I have ipad-2 16 gb wifi after upgrading to latest software 4.3.5 my wifi icon is bleached and showing no wifi i tried resetting several times and also tried re booting it and i restored the software several times but still the problem remains please

Respected sir,
i have ipad-2 -16gb wifi. i recently upgraded to latest software 4.3.5 by using i tunes. after updating my ipad wifi icon is bleached and showing no wifi tried resetting several times and also tried rebooting it and i restored the software several times but still the problem remains please help me out.
waiting for your response.
i am using windows 7 operating system.
with regards
vinayaka

Vinayaka-
After all you've tried, Dah*veed is probably right about needing warranty assistance.
But first check to be sure Settings-Airplane Mode is set to OFF, and Settings-WiFi-WiFi is set to ON.
Try unplugging your WiFi router for a few seconds. Then reset the iPad's network. Go to Settings-General-Reset-Reset Network Settings. You will need to reconnect to your WiFi.
Fred

I upgrade my firefox to 3.6.4 but when i add some add-ons they tell me that i have 3.5.8 & i have to upgrade it ... i reinstalle 3.6.4 several time but still the same problem

i upgraded my firefox to 3.6.4 but when i add some add-ons it tell me that i have 3.5.8 & i have to upgrade it ... i reinstall 3.6.4 several times but still the same problem ...
== 2-3 days ago

Look at the highlighted copy of your Help > About Mozilla Firefox image attached below this message.
<u>'''Reset general user-agent'''</u>
-In Firefox, type '''about:config''' in the URL bar and press the Enter key.
-If you see the warning, accept it (promise to be careful).
-Filter = general.useragent.extra.firefox
-Right-click that preference and select Reset
-Then restart Firefox (File > Restart Firefox)

TS4036 When I back up my iPad, it says that the last backup could not be completed. I repeat the backup process several times but still receive the same message. What should I do?

When I back up my iPad, it says that the last backup could not be completed. I repeat the backup process several times but still receive the same message. What do I do?

Welcome to the Apple Community.
The following article(s) may help you.
Troubleshooting iCloud Back Up

In eBay & YouTube, I get the message to install the latest version of Adobe Flash Player; I have gone through the download and installation procedure several times, but still get the same message - why can't I install the latest version on Firefox?

In eBay, I was trying to upload pictures when I got this message: "You need the latest version of Adobe Flash Player to use the standard picture uploader.
Download and install the latest version from Adobe before continuing."
In YouTube, when trying to watch a video, I got this message: "You need to upgrade your Adobe Flash Player to watch this video."
I have gone through the procedure for downloading and installing the latest version of Adobe Flash Player, but still get the same messages when I reopen Firefox and revisit these sites.
There does not seem to be the same problem with Safari, which runs the latest version of Adobe Flash Player with no trouble.
I am using an iMac running Mac OS X Version 10.6.7.

You can find the latest Flash player for Firefox on this page.
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
For Firefox on 64 bit Windows, you need the 32 bit Flash version version because Firefox is a 32 bit application.
*http://www.adobe.com/software/flash/about/

HT201177 inserted a CD into my mac and it doesn't play or even eject the CD, i tried to reboot several times but still it wont come out.

My Mac is very slow and some times takes a while to start up, is there a way to defrag or speed up. i don't have alots off stuff on my laptop use my hard drive..
Can anybody help ASAP.
Eddie

Sure ! -I"m presuming you're using a Mac Pro and not a MacBook Pro, which are different cats. For the CD, reboot and hold down the mouse button, and keep holding it down, then the CD should eject. Failing that, you could try "the old paperclip trick". carefully pull down the aluminum shutter covering the cd tray and look underneath the tray, You'll probably see a power light and a small hole. use a very stiff, sturdy paperclip, straighten it out and stick it in the hole.The tray should now release just enough for you to grab the tray and get the cd out. As for your Mac running slow, how much RAM do you have on board? Try running Disk Utility, Onyx or TechTool Pro, hopefully 1 of those 3 should help your Mac run better. Just FYI, this is a Mac pro forum, y'know the tower things, not Macbook pro-just letting you know for future reference. The paperclip trick probably won't work if it's a portable Mac. also, try doing an SMC reset....
John Brine

Can't login to wireless network. Deleted network but still time-out trying to login without asking for new password

Well I am downgrading (if you can call it that). Leopard and Snow leopard are just superior OS's for power users. All the fancy stuff put in Lion actually slowed it down considerably among all the other bugs..... but anyway
I changed my network password today. My mbp on lion cannot access the network. I deleted the saved names in network preferences, I rebooted my modem an router, even cleared the DNS cache in Terminal. It still tries to connect to the network and times out... without asking me for the new WEP password I have put on the network.
My other laptop on snow leapord does what it is supposed to. Deleted the network name in network preferences, clicked on network name to get online, and then it requested the password name. Why doesn't Lion do this??
Like I said before I did all the above. I don't know what else to do. I also manually deleted the keychain passwords. Still no luck. I guess I have to rename my network lol.

Access the router's admin area and put in a new password.

HT2204 When I try logging into my account on itunes to edit my account info it tells me I need to log in with my password! When I put my password in it still tells me I need to log in using my password! I did this several times but still not logging me in

when attempting to log into my account on itunes it ask for my password! I put my password in then I get the prompt again asking for my apple password! I put it in again and it still won't take!! What can be going on? I'm trying on my Mac pro !! Everything is up to date on the the latest Itunes version!!

I just asked the same thing and did some research. Some people have said that the UDID code is like banned from instagram, but your account isn't. I'm able to use it on my phone but not on my iPod.

P2 import problem - solved but still mysterious

I posted yesterday about my P2 files that had imported before but suddenly did not - with that scary "incomplete or corrupt file" message.
I keep a cloned backup of my OS and all software on another drive that can be "cloned" back into my main drive. (great software- Carbon Copy Cloner - downloadable shareware, but leave the kind creator a donation.) It takes time to clone everything but not nearly as long as starting from scratch with disks, numbers and a zillion fixes and updates. Just be very careful to save everything like user files and desktop stuff.
Now, starting again with the pre-problem "cloned" osx and fcp, which are back to 10.4.6 and 5.0.4, the P2 files are importing perfectly again. So clearly the problem was not "incomplete or currupt" files, but some mysterious software glitch that occured in OSX or FCP? If anybody has any thoughts, I would love to dig deeper into this mystery in case it happens again. Meanwhile, if you are told that your P2s are "incomplete or corrupt" and you haven't messed with the locks or txt file at all, don't despair. Wouldn't it be nice to get an error message that said "Whoops - no idea what's goin' wrong honey - but it ain't necessarily your fault"

Hmmm...so the static isn't consistant?
Try looking at the footage with something like the Panasonic P2CMS reader/importer:
https://eww.pavc.panasonic.co.jp/pro-av/sales_o/p2/cms/index.html
Or try HD Log or P2 Log from www.imagineproducts.com. See if Raylight sees this (www.dvfilm.com - demo available).
Shane

WRTU54G-TM Port Forward issues, DHCP server disabled but still gives out addresses

I've seen other posts about port-forwarding issues. I've had to hard-reset the device twice in 2 months to clear this up.
One issue that I can't figure out at all is that the DHCP server gives out addresses when it is set to disabled. This is a problem because it gives out the public DNS servers, which will not resolve addresses on my LAN. Anyone else seen this?
Anyone had success putting this router behind a better one and still getting the phone SIM to register and work?

Have you tried to upgrade the firmware on your Router?
Click Download the latest firmware for your Router and save the Firmware file on your Desktop.
Once you Download the firmware for your Router, Now you need to login to the Router setup page and click on the "Administration" tab and below click on "Firmware Upgrade" and then click on the Browse Button and select the firmware file and click on Upgrade.
Once the firmware is upgraded successfully then you need to Reset your Router and Re-configure all the settings on your Router from scratch.

Purchased a movie. Trying to watch it through Apple TV. Receiving error "An error occurred loading this content. Try again later." I have tried to play the movie several times but still get the same message.

I purchased a movie using Apple TV. I keep receiving the same error message "An error occurred loading this content"

There may be network issues or issues with Apple's servers.
Personally I would unplug and restart AppleTV. If there are still problems and you can access the iTunes store sections to browse I would contact itunes store support.
AC

I used to be able to email photos on my ipad 2, can no longer do that. i have looked at several setting but still unable to send photos

it goes thru the steps but never gets sent. all the pics i tried to send have a exclamation mark on the unsent email. help

ok, i deleted my hotmail address from the ipad and then added it back in, works, i think the problem was when i changed my password a few months ago on the hotmail acct in my home computer. all better now!!!!

Impdp imported several MB but still 0 out of Nn million rows?!?

Similar Messages

Maybe you are looking for