Implement Hierarchy's On InfoObject that is Not Auth Relevant.

Hello Friends,
Please Advice me in this issue.
I am Upgrading from 3.1 to 7.0.I am able to implement hierarchies when the Infoobject is auth relevant.
There are hierarchies in 3.1 on Infoobjects which are Not Auth Relevant.
Like 0PLANT ..I don't know how to implement using this.
Is there any way to implement hierarchies on InfoObjects which are not auth relevant in BI 7.0 using Analysis authorizations.
Or Do i need to make thes non auth relevant InfoObjects of 3.1 to auth relevant in 7.0 and implement hierarchies.
Please advice.
Thanks,
Ram

Hi Keerti,
Can you please tell me how to implement hierarchy with out making 0PLANT auth relevant.
We are upgrading from 3.1 to 7.0.
0PLANT is not auth relevant in 3.1 but it has Hierarchies.
So business team wants to have the same in 7.0 with out making it auth relevant.
Please help me in doing this.
Thanks
Ram

Similar Messages

Clean up old SID values from an InfoObject that does NOT have master data

I have a characteristic infoobject that does NOT have Master Data but it has a SID table. I assume that it is used primarily for the F4 value help. Now we have changed some of our data for this infoobject in R3 so that some of the values in the SID table will never be used again. My problem is that these values are still displayed in the F4 value help. And because the old values are very similar to the new values some users mistakenly pick the old value and then the query results come back empty.
FYI - The datasource that uses this infoobject as an attribute is extracted from R3 in a Full load each night. So there is no risk that the old values in the SID table will be needed in any Master Data/Cubes/DSOs/etc.
Is there a way to delete the unwanted SIDs from this table /BIC/SXCSAOFREG? Or is there some way to make sure that the unwanted SIDs to not show up in the F4 value help?
Thanks,
Dave

Hi David,
Goto SE14 trans --> ENter the table name as /BIC/SXCSAOFREG. Select the "Edit" radio button. Then Select "Delete Data" radion button & click on "Activate & adjust database". But be very careful NOT to click on Delete Database table(This will delete the physical database table!!!
Regards,
Pavan

Call of a method or kernel Method that has not been implemented

hi,
Iam Working on CRM Sandbox system and R/3 system my reqeuirement is to transfer data from R/3 to CRM system through Idoc. so I have IDOC (3 in number now) just sitting in XXCLNT200.The IDOC type is HRMD_A01.it's refused to be processed into application and there is no error on the IDOC.
      In this Scenario R/3 system idoc status is 53 - application document posted so in R/3 system idoc woking is fine . Coming to CRM System IDOC status is - 64 Ready to posted in application . SO iam reprocess the IDOC using WE19 . While reprocess the idoc it's is going to be in dump .
Runtime Errors         CALL_METHOD_NOT_IMPLEMENTED
Exception              CX_SY_DYN_CALL_ILLEGAL_METHOD
Date and Time          22.08.2007 12:12:45
Short text
Call of a method or kernel Method that has not been implemented
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_EX_HRSYNC_P================CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
pls help me

Hi Chandra,
I got the same error.
I have developed the webdynpro screen to upload the xlsx file format using the below thread
http://scn.sap.com/community/web-dynpro-abap/blog/2012/04/05/upload-xlsx-file-in-webdynpro-abap-and-view-its-content#comment-338018
I have successfully activated the component but when i run the component i found the following error.
Runtime Errors         CALL_METHOD_NOT_IMPLEMENTED
Exception              CX_SY_DYN_CALL_ILLEGAL_METHOD
Short text
Call of a method or kernel Method that has not been implemented
Error in the ABAP Application Program
The current ABAP program "/1BCWDY/EIMGDDDP2WS8KQ67GU1D==CP" had to be
   terminated because it has
come across a statement that unfortunately cannot be executed.
can please guide me .
Thanks,
Harish Singh.

When opening certain websites or clicking links from google results, I get this popup message "Error: 'setTimeout' called on an object that does not implement i

The message says: "Error: 'setTimeout' called on an object that does not implement interface Windows" Multiple message windows for this get open. And there is an OK button under it. I have to click on OK button on all the windows to be able to continue with working on the browser again.

hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

While doing planning hierarchy, it is saying that planning level is not....

hi,
every body,
while defining planning hierarchy, it is saying that planning level does not exist.
please suggest me in which t code planning level is defined in sap.
please throw some light.
regards,
balajit

ok

How can I enter data in an input schedule on a member in the EPM Add-On that is not a base member?

Hello, all,
how can I enter data in an input schedule on a member in the EPM Add-On that is not a base member?
E.g. I want to implement a top-down-planning scenario and I have the following hierarchy:
Europe
     Germany
     France
     UK
     Spain
     Italy
How can I enter a value on Europe in an input schedule in order to allocate this value afterwards?
Thanks in advance and best regards
Gerd

Gerd,
It should be something like below -
EuropeInput
Europe
     Germany
     France
     UK
     Spain
     Italy
EuropeInput shall be kept out of hierarchy and should be a base level member. Users will enter the numbers in this member. In your script logic, you will make use of this member to allocate the data in Bas(Europe) i.e. Germany, France, etc.
Effectively, after allocation the same data will be rolled up to Europe.
Many top-down planning would use such work-around as BPC doesn't allow writing to parent node.
Regards,
Ashish

An exception that could not be caught occurred.

While creating shopping cart at the very first step I am getting following error message.
Error when processing your request
Note
The following error text was processed in the system: An exception that could not be caught occurred.
The error occurred on the application server and in the work process 1.
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: BBP_PD_ABORT of program SAPLBBP_PDH
Form: ABORT of program SAPLBBP_PDORG
Form: CHECK_PROC_ORG_AND_GROUP of program SAPLBBP_PDORG
Form: ORG_CHECK_SINGLE of program SAPLBBP_PDORG
Form: ORG_MAINTAIN_SINGLE of program SAPLBBP_PDORG
Function: BBP_PDORG_CREATE of program SAPLBBP_PDORG
Form: ITEM_F_CREATE_FROM_WTAB of program SAPLBBP_PDIAD
Form: ITEMLIST_F_UPDATE of program SAPLBBP_PDIAD
Function: BBP_ITEMLIST_UPDATE of program SAPLBBP_PDIAD
Form: PROCDOC_UPDATE of program SAPLBBP_PD
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DSR in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server. In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http-c -l:E-s: -i: -w:1-d:20080606-t:104953-v: RABAX_STATE-e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
I have checked In ST22 (ABAP Dump Analysis) it says,
Runtime Errors         UNCAUGHT_EXCEPTION
Exceptn                    CX_BBP_PD_ABORT
ShrtText
    An exception that could not be caught occurred.
The exception 'CX_BBP_PD_ABORT' was raised but was not caught at any stage in the call hierarchy.
Since exceptions represent error situations, and since the system could not react adequately to this error, the current program, 'SAPLBBP_PDH', had to be terminated.
I also checked the note no. 673372
SAP Note     673372              Version 9
Implementation Status           Cannot be implemented
Processing Status   New        Processor
As per the note I checked BBP_CND_CUSTOMIZING_CHECK, it through an error of IPC not running, As if this is a classic scenario I guess IPC is not used.
Please guide me to solve this issue.
Regards,
Vivek B.

Hi Vivek,
Having a look a would say that the problem is in the determination of purchasing organization. I would advice to review the attributes in PPOMA, mainly the responsability of the organizational unit that you has defined as purchasing group and purchasing unit.
I hope this help
BR

How to delete an Hierarchy in the Infoobject

Hi Guys,
i made an Hierarchy manually in the Infoobject "X" for example,
when i made the hierarchy with the values that i needed, the system create another node to the values not selected in my Hierarchy, in the query i selected the Infoobject X with the hierarchy that i made, the problem is when i want to navigate and click the Infoobject to drilldown, appears like Option the Hierarchy that i made and the NODE of the values out of my hierarchy, here the client doesnt want to see that NODE when he is navigating, just the hierarchy that i made because it´s confused for the client,
i want to delete this Node, but doesnt appear in the infoobject, its like something internal of the infoobject that it create
how can i delete it or do something that hide it when is navigating in the report??

Hi Jorge,
one option is avaialable in BW Administrator workbench, (RSA1).
select your hierarchy from infoobjects or directly from RSA1 Screen, by clicking on Hierarchy button,
in hierachy screen, if in display mode, chnage to Change mode and click on hierarchy Attributes button and and enable check box 'Suppress "unassigned node'. this is stop displaying Not assigned values in report.
hope this helps
Regards,
Daya Sagar

TMG - 0x80090325 -Certificate Chain was issued by an authority that is not trusted

Hello,
I am having some problems with testing a OWA (SSL) rule. I get that message.
The TMG belongs to the domain and therefore as far as I know it gets the root certificate of my CA (I have deployed a Enterprise CA for my domain).
That is why I don't understand the message: "...that is not trusted."
The exact message:
Testing https://mail.mydomain.eu/owa
Category: Destination server certificate error
Error details: 0x80090325 - The certificate chain was issued by an authority that is not trusted
Thanks in advance!
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)

Thanks Keith for your reply and apologies for the delay in my answer.
I coud not wait and I reinstalled the whole machine (W28k R2 + TMG 2010) . I suppose I am still a bad troubleshooter, I have experience setting up ISA, TMG, PKI, Active directory but to a certain extent.
1. Yes, I saw it when hitting the button "Test Rule" in the Publising rule in the TMG machine.
2. No, it did not work in this implementation but it has worked in others, this is not difficult to set up, until now, hehe.
3. You said: "...If you are seeing it when running "Test Rule" then it simply means that TMG does not trust something about the certificate that is on your Exchange Server...."
But the certificates are auto-enrolled, and when I saw the details of the certificates they all are "valid" , there is a "valid" message.
4. You wrote: "...Easiest way see everything is create an access rule that allows traffic from the LocalHost of TMG to the CAS and open up a web browser. Does the web browser complain?..."
But as I said, I re-installed the whole thing because nobody jumped in here , and I needed to move forward, I hope you understand.
5. S Guna kindly proposed this:
If you are using internal CA,
You need to import the Root CA certificate to TMG servers.
Import Private Key of the certificate to Server personal
Create a Exchange publishing Rule and Point the lisitner to the Correct certificate.
Since you are using internal CA, You need to import the Root CA certificate to all the client browers from where you are accessing OWA
But I think I do not have to perform any of those tasks, although I am not an expert but have worked with Certificate for one year or so.
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)

How to delete the Hierarchy data from Infoobjects.

How to delete the Hierarchy data from Infoobjects. In my case I had 300 records in the corresponding table of info object.
When i was trying to delete the hierarchy data, I am getting error message. "Some master data not deleted". Can any one tell me to delete all these records by using a program.

Hi
Go to SE11 and enter the hierarchy table name.
/BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
Thanks
TG

Exclude a hierarchy node by using exit variable (not in query designer)

Hi gurus!!
I have a hierarchy for the infoObject 0COSTELMNT. Depending on the user who executes the report, the node '0599ADJUSTMENTS' must be displayed or not.
I am trying to solve it by using an exit variable:
Varible Type: Hierarchy Node
Processing : Exit
On the exit, I have entered the following code:
      IF ( sy-subrc = 0 ).
          l_s_range-sign = 'E' .
          l_s_range-opt = 'EQ' .
          l_s_range-low = 'AJUSTES'.
          APPEND l_s_range TO e_t_range.
     ENDIF.
But unfortunately does no work!!
Any ideas?
Thanks in advance
Regards.
Carmen Rodríguez

Hi,
Check the below link gives good knowledge on variables:
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/579b3c494d8e15e10000000a114084/content.htm
Reg
Pra

InfoObject ZPRODGRP does not fulfill ref. integrity in record 39435 in valu

Hi Gurus,
There is a query which is related to master data. While updating the infocube we are getting the error InfoObject ZPRODGRP does not fulfill ref. integrity in record 39435 in value 58240, we have maintained the ref. integrity value 58240 in BW but still getting the same error message.
Please help me out in this issue.

Hi Bhanu Gupta,
I have checked it in the SID Table of Product Group /BIC/SZPRODGRP it exists in the SID table, but when i try to look into the CUBE with the particular product group it says that it does not exist with that value.
I have seen many of your replies which are quite knowledgeble.
Please advise me soon what is to be done.

[39008] Logical dimension table has a source that does not join to any fact

Dear reader,
After deleting a fact table from my physical layer and deleting it from my business model I'm getting an error: [39008] Logical dimension table TABLE X has a source TABLE X that does not join to any fact source. I do have an other fact table in the same physical model and in the same business model wich is joined to TABLE X both in the physical and business model.
I cannot figure out why I'm getting this error, even after deleting all joins and rebuilding the joins I'm getting this error. When I look into the "Joins Manager" these joins both in physical as well as logical model do exist, but with consistency check it warns me about [39008] blabla. When I ignore the warning and go to answers and try to show TABLE X (not fact, but dim) it gives me the following error.
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: TABLE X.column X Please fix the metadata consistency warnings. (HY000)
SQL Issued: SELECT TABLE X.column X saw_0 FROM subject area ORDER BY saw_0
There is one *"special"* thing about this join. It is a complex join in the physical layer, because I need to do a between on dates and a smaller or equal than current date like this example dim.date between fact.date_begin and fact.date_end and dim.date <= current_date. In the business model I've got another complex join
Any help is kindly appreciated!

Hi,
Have you specified the Content level of the Fact table and mapped it with the dimension in question? Ideally this should be done by default since one of the main features of the Oracle BI is its ability to determine which source to use and specifying content level is one of the main ways to achieve this.
Another quick thing that you might try is creating a dimension (hierarchy) in case it is not already present. I had a similar issue few days back and the warning was miraculously gone by doing this.
Regards

[39008] Logical dimension table ... has a source ... that does not join to

Oracle BI 11g
Hi,
I have this set of tables:
1) Table "Sales" with fields: ID, Billdate, ProductID, Amount
2) Table "Products" with fields: ID, ProductName, BrandID, TypeID
3) Table "Brands" with fields: ID, Name
4) Table "ProductTypes": ID, Name
In Physical layer I add these tables and create Physical Diagram with constraints like this:
[Brands] -------------------->[Products]
[ProductTypes] ---------->[Products]
[Products] -----------------> [Sales]
In Logical Layer I create logical table T1 Products with sources:
- LTS1 Brands,
- LTS2 ProductTypes,
- LTS3 Products
and fields:
- ProductID
- ProductName
- Brand
- ProductType
After that I create Dimention With Level-Based Hierarchy (H1 Products):
Total Products
- Brands
-- ProductTypes
--- Detail Products
When I try "Check Global Consistency" I get warning: "[39008] Logical dimension table T1 Products has a source LTS1 Brends that does not join to any fact source."
And after that when I try to make Analysis in Oracle BI, for example:
H1 Products | Amount
and then drill down item "Total Products" I receive error:
"State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14025] No fact table exists at the requested level of detail: [,Brand,,,,,,,,,]. (HY000)"
What's wrong? Where do I mistake? And why I don't get any messages about Logical Table Source LTS2 Product Type?

Hi,
you can create a single LTS for the product with the join for all 3 tables. Do you have a particular reason for the modelling that you have used?
Regards,
Gianluca

[39008] Logical dimension table X has a source that does not join to any...

Hi Gurus,
I have warning:
"[39008] Logical dimension table X has a source that does not join to any fact source"
WHERE X:
PROMOTIONS,PRODUCTS, CUSTOMERS, CHANNELS
but all logical table are mapped to fact.
Eveb I can create reports for them
(The metadata was derived from OWB 11gR2, SALES_EE)
Thanks
Laszlo
Thanks for Your earlier answer as well!

Hi,
Did you create hierrarchy on that dimension.?
Add contel level in fact source to hierarrchy detail for the fact that joins the dimension.
Look at this for best practice...http://gerardnico.com/wiki/dat/obiee/hierarchy?s
Please do close your previous thread assigning points by clicking helpful or correct to the replies
Import XML file into rpd file
Thanks,
Srikanth

Implement Hierarchy's On InfoObject that is Not Auth Relevant.

Similar Messages

Maybe you are looking for