Implementing Transport Naming convention with the help of BAdIs (Urgent)

Hi Gurus,
We need to implement Transport Naming convention in our landscape.
Transport request should follow the following naming conventions and to enable this we have to enable some necessary BAdIs?
Scenario would be like this....!
Customization
LC-<Track>-<Description> (Non Transportable Request)
<Module>-<Track>-<Configuration Type>-<Change No>-<Description of the Customisation.>
ABAP Developments
AB-<Track>-<Configuration Type>-<Development No>-<Description of the Development>
OSS Notes
BC-<Track>-OSS#<OSS Note No>-<Version>-<Patch Number>-<Process Team>-<Note Description>
Authorization
BA-<Track>-<Version>-<Authorisation Description>
Details :
Track : 01 u2013 Hot fixing, 02 u2013 Implementation, 03 u2013 BIW / EP, 04 u2013 Support
Module : SAP Module (FI, CO, MM, SD, PP, etc..)
Configuration Type : I u2013 Initial Configuration, R u2013 Change due to TPR or Additional Functionality
Change No / Development No : Unique no to trance the base documentation
Please suggest .....................!
Which are the necessary BAdIs needs to be enabled and what other configuration needs to be done.
If anybody has any document please provide.
Thanks in advance..............!!!
Regards,
Jai Sach

Hello,
SPRO --> SAP NetWeaver --> Application Server -->
System administration --> Change & Transport domain
--> BADI -->Business Add-In when Editing Requests
IF_EX_CTS_REQUEST_CHECK~CHECK_BEFORE_CREATION
Happy Tony

Similar Messages

How to implement Cisco best Pratice with the help of Ciscoworks

Hi:
We have received a large number of required changes to various Cisco routers and switches of different models. For example we need to configure
"no IP unreachables" under more then 1000 cisco devices and under every interface in each device. Is there some method using Ciscowrks where I provide the command to be entered , and Ciscoworks looks at every router and switch and alone know to make the change under every interface in the equipment? Any given device can have a number of interfaces which I don't know ahead of time and which is of different types ( fast, giga, tera , etc) so I can't create a general job or a template. Going manually is endless but it seems that the requirements of Ciscoworks are also very restrictive so as not to enable a general job to be created.
I thank anyone for any help
We have RME, CS and CM installed , so the tools are here.
Mickey

You can use RME's baseline compliance feature for this. This feature can be found under RME > Config Mgmt > Archive Mgmt. The exact location will depend on your version of RME. A template like the following will do what you want.
Sub-mode: interface [INTF]Body:+ no ip unreachables
When deployed, that will add "no ip unreachables" to all interfaces that do not already have the command.

RE: multiple named objects with the same name andinterface

David,
First I will start by saying that this can be done by using named anchored
objects and registering them yourself in the name service. There is
documentation on how to do this. And by default you will get most of the
behavior you desire. When you do a lookup in the name service (BindObject
method) it will first look in the local partition and see if there is a
local copy and give you that copy. By anchoring the object and manually
registering it in the name service you are programmatically creating your
own SO without defining it as such in the development environment. BTW in
response to your item number 1. This should be the case there as well. If
your "mobile" object is in the same partition where the service object he is
calling resides, you should get a handle to the local instance of the
service object.
Here is the catch, if you make a bind object call and there is no local copy
you will get a handle to a remote copy but you can not be sure which one!
It end ups as more or less a random selection. Off the top of my head and
without going to the doc, I am pretty sure that when you register an
anchored object you can not limit it's visibility to "User".
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of David Foote
Sent: Monday, June 22, 1998 4:51 PM
To: [email protected]
Subject: multiple named objects with the same name and interface
All,
More than once, I have wished that Forte allowed you to place named
objects with the same name in more than one partition. There are two
situations in which this seems desirable:
1) Objects that are not distributed, but are mobile (passed by value to
remote objects), cannot safely reference a Service Object unless it has
environment visibility, but this forces the overhead of a remote method
call when it might not otherwise be necessary. If it were possible to
place a copy of the same Service Object (with user visibility) in each
partition, the overhead of a remote method call could be avoided. This
would only be useful for a service object whose state could be safely
replicated.
2) My second scenario also involves mobile objects referencing a Service
Object, but this time I would like the behavior of the called Service
Object to differ with the partition from which it is called.
This could be accomplished by placing Service Objects with the same name
and the same interface in each partition, but varying the implementation
with the partition.
Does anyone have any thoughts about why this would be a good thing or a
bad thing?
David N. Foote
Consultant
Get Your Private, Free Email at <a href=
"http://www.hotmail.com">http://www.hotmail.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

David,
First I will start by saying that this can be done by using named anchored
objects and registering them yourself in the name service. There is
documentation on how to do this. And by default you will get most of the
behavior you desire. When you do a lookup in the name service (BindObject
method) it will first look in the local partition and see if there is a
local copy and give you that copy. By anchoring the object and manually
registering it in the name service you are programmatically creating your
own SO without defining it as such in the development environment. BTW in
response to your item number 1. This should be the case there as well. If
your "mobile" object is in the same partition where the service object he is
calling resides, you should get a handle to the local instance of the
service object.
Here is the catch, if you make a bind object call and there is no local copy
you will get a handle to a remote copy but you can not be sure which one!
It end ups as more or less a random selection. Off the top of my head and
without going to the doc, I am pretty sure that when you register an
anchored object you can not limit it's visibility to "User".
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of David Foote
Sent: Monday, June 22, 1998 4:51 PM
To: [email protected]
Subject: multiple named objects with the same name and interface
All,
More than once, I have wished that Forte allowed you to place named
objects with the same name in more than one partition. There are two
situations in which this seems desirable:
1) Objects that are not distributed, but are mobile (passed by value to
remote objects), cannot safely reference a Service Object unless it has
environment visibility, but this forces the overhead of a remote method
call when it might not otherwise be necessary. If it were possible to
place a copy of the same Service Object (with user visibility) in each
partition, the overhead of a remote method call could be avoided. This
would only be useful for a service object whose state could be safely
replicated.
2) My second scenario also involves mobile objects referencing a Service
Object, but this time I would like the behavior of the called Service
Object to differ with the partition from which it is called.
This could be accomplished by placing Service Objects with the same name
and the same interface in each partition, but varying the implementation
with the partition.
Does anyone have any thoughts about why this would be a good thing or a
bad thing?
David N. Foote
Consultant
Get Your Private, Free Email at <a href=
"http://www.hotmail.com">http://www.hotmail.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Dropdown with the help of webelements.

Hi Experts,
I have a requirement in crystal reports for enterprise to show a dropdown having more than thousand values in it. If i go for a simple dropdown, It will be a huge list and difficult for the user to find the value from a huge list. Can you suggest any better way to implement it?
I heard about webelements in Crystal reports. With the help of webelements can i make the dropdown selection easier? I would be grateful if you can provide me with inputs.
Regards
Sarahanna

that's actually why it was built, to make parameter selection easier for the end user.
if you have a bunch of parameters on a report and then refresh the report, the default prompt page can be baffling to the end user...it ends up being this long interface wherein the end user has to ensure that they fill in values as they scroll down. as the report developer is unable to actually embed instructions into the prompt page, or provide default values for all prompts (like dates), or to even hide or then show specific controls, it is not very friendly.
with the webelements functions you can create a graphical interface at the top of a report as in the provided live example or create a separate report that acts as the interface. since you are using crystal reports to design this you have flexibility in what you show and how you show it.
the example provided shows how to take way over 1000 values and break it down into usable controls.

Profitabilty analysis with the help of SD_C03

Dear all ,
can we check profitabilty analysis with the help of SD_C03
I do not have COPA implemented in ECC side

Hi
Check the below link
Infocubes and Data sources required to generate reports
Check the keyfigures in CUBE SD_C03, if key figures satisfies your requirements, then you can go ahead
Regards,
Venkatesh

The naming convention of the disk device name (/dev/dsk/cXdY)

Hi All,
Please let me know the naming convention of the disk device name (/dev/dsk/cXdY) recognized on OS of a guest domain.
I found from the document of Oracle that the value specified as the id option of ldm add-vdisk command went into Y of cXdY.
However, there is no telling by what kind of rule X portion of cXdY is decided.

Hello
I have found this in the man ldm but I don't know how to related the cN, I mean I don't know where the N comes from. Still checking and trying to get more info.
vdisk
Virtual disks are generic block devices backed by different types of physical devices, volumes, or files. A virtual disk is not synonymous with a SCSI disk and, therefore, excludes the target ID (tN) in the disk name. Virtual disks in a logical domain have the following format: cNdNsN, where cN is the virtual controller, dN is the virtual disk number, and sN is the slice.
Regards
Eze

Creation of report with the help of report painter

Dear Experts,
I need report painter material, if any body have pls farward to me.
my intension to create controlling report with the help of report painter.
I am ready to award full points.
Thanks in advance
Regards
avudaiappan
Moderator - Please read this:
/thread/931177 [original link is broken]
Thread locked

Hello Chinasammy,
Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
Advantages of Report Painter include:
Flexible and simple report definition
Report definition without using sets
Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
=============================================
Below mentioned is the process for creating reports using Report Painter as a tool.
Selecting and maintaining a library for your report: As the transfer structure to Report Painter you use a report table, which is defaulted by SAP and can not be maintained. This table contains characteristics, key figures and predefined columns. In a library, you collect the characteristics, key figures, and predefined columns from the report table, which you need for your Report Painter reports.
When you define a Report Painter report, you assign it to a library. Reports assigned to one library can only use the characteristics, key figures, and predefined columns selected for that library.
When you create or maintain a library, the Position field determines the sequence in which the characteristics, key figures or (predefined) key figures appear in the Report Painter selection lists when you define a report. This allows you to position the objects that you use regularly in your reports at the beginning of the selection lists. If you do not make an entry in the Position field, you will not be able to use this object in Report Painter reports.
You can use either the standard SAP libraries for your reports or define your own.
(ii) Selecting or maintaining a standard layout for your report: Standard layouts determine report layout features and the format of your report data.If the SAP standard layouts do not meet your reporting requirements, you can create a new standard layout or change an existing one.
(iii) Defining row and column models: A model is a one-dimensional, predefined reporting structure that you can insert in either the rows or columns of your report.If you often use the same or similar row or column definitions in your reports, it is recommended that you create row or column models.
You must define the row and/or column models that you want to include in your report definition before you define the report.
You can also use the standard column models supplied by SAP.
(iv) Defining the report: Defining a Report Painter report involves the following steps.
(a) Define the report columns: You define the report columns using the characteristics, key figures, and predefined columns selected for the library that the report uses. Alternatively, you can use a column model for column definition. Column models are predefined column structures which you insert into your entire column definition, instead of defining each individual column.
(b) Define the report rows: You define the report rows using the characteristics selected for the library selected for the report.
Alternatively, you can use a row model for your row definition. Row models serve the same purpose as column models, but are used to define a report row.
Edit and format the report rows and columns in line with your requirements. (For example, you can hide rows or columns, define the column width or define colors for your report rows).
(iii)Define general data selection criteria for the selection of your report data: Selection criteria are the characteristics used to select data for the entire report. You cannot enter characteristics as data selection criteria if they are already being used in the report rows or columns.
(iv) Assigning the report to a report group: Once you have defined a report, you must assign it to a report group. A report group can contain one or more reports from the same library. However, reports that share the same data will select data more quickly and improve processing time.
Hopw this helps you. Please let me know if you need anything more and assign points.
Rgds
Manish

Custom report templates with the help of BI Publisher.

Hi All,
I have created custom report templates with the help of BI Publisher it is working as we excepted.
refered : https://blogs.oracle.com/kyle/tags/reports
But our requirement want to change the color of heading and include filters in output report, It is possible, if yes pls share you comments?
Best Regards
Pradeep

how silly of me!
just restarting the tomcat sorted the problem!!!

Replication of Berkeley DB Xml Edition with the help of JAVA API

hi,
i am trying to replicate berkeley DB to 2 other replicas.with the help of small program which along with its documentation(of chapter 3). And i'm using java API for the same(specifically replication framework program.)
All necessary files are get created at host side like log files, dll files, db files. But at replica(client) side nothing get created. Host and clients are placed in the same network.
But unfortunately its not working. don't know the reason. And its not giving any sort of error. And i dont know how to go ahead. Or is there any other way should i proceed with.
So could you help me out to get rid of this problem.
Thanks

What compiler are you running?
See this message and thread:
Re: Problem after update to 2.3.8
It may be necessary to apply the -fno-strict-aliasing flag to the Berkeley DB Java library as well.
Regards,
George

I had to restore all the files on my pc using carbonite. I reinstalled iTunes and was able to find my music with the help of Apple support. How do I find my podcasts?

I had to restore all the files on my pc using carbonite. I reinstalled iTunes and was able to find my music with the help of Apple support. How do I find my podcasts?

This helped, I restored them, but when I go to iTunes they are not there. Is there another step?

Transfer Of Data from Sap to Oracle with the help of Enterprise Services.

Hello,
We want to transfer data from Sap to Oracle using standard Enterprise Services.Some fields were not available in the existing standard Enterprise Services,so we have enhanced the existing Services by writing code inside BADI available with Enterprise Services.Rest of the fields we have mapped with the existing fields available in standard Enterprise Services.But,the Oracle people want to fetch all data from Sap without entering any input as a mandatory field in the Enterprise Services.The existing standard Enterprise Services require to enter any field as mandatory and are not accepting the range in input for multiple records.e.g.All enterprise Services related to Sales Orders are displaying only one sales Order.We have searched all Enterprise Services for Sales Order(related to reading of data),but not able to find service which would display mutiple records without entering any input.ECC_SALESORDER009QR is the only service which is displaying multiple records without entering any input,but the required fields are not available in this service.So,kindly suggest what we need to do further.
1.Should we go for customization of services completely,so that it would fulfil our requirement.
2.Are there standard Enterprise Services exists which would we give us data in range(all records).
If they exists,please specify the names of Services for reading Purchase Order,Production Order,BOM etc.
Thanks & Regards,
Divya.

Hi Vaibhav,
Let me tell you the objective in detail.
Objective.
To develop a package solution which will work as a bridge between Oracle APS and SAP system so that customers using SAP will be able to use advantages of Oracle APS for their planning needs.
This will consist of following major components:
OA Templates is an Oracle utility to load data from any legacy system to Oracle APS using standard flat files.
Oracle has developed an Application Integration Architecture which is a standard architecture used for integration of Oracle products with other systems.
Enterprise services is an SAP utility to communicate with SAP.
AIA canonicals are standard canonicals developed by Oracle where we have to map data fields from destination system (Oracle APS) and source system (SAP)
Fusion middleware is being used to develop application interfaces following AIA standards.
Tasks at stake:
Mapping of Oracle APS fields and SAP Enterprise Service fields to AIA canonicals
Technical work of developing middleware using Oracle Fusion
From Sap side,we have to map fields which we have received from Oracle with the help of Enterprise Services,rest consumption of these services is done by Oracle guys.So,suggest is there enterprise services available which would give us multiple records .
Thanks & Regards,
Divya.

With the help of script i want to identify each and every thing in a indesign file

i want to identify the each and every thing in a .indd file with help of script.and also i have to find totally how many farmes or things present in that file
kindly guys help me out.
and also suggest me some ideas.
thanks in advance
regards,
siv

thanks ya...
Actually my recuirment is there will be so many number of frame or text frame will present there in a indd file
>with the help script im giving number to the script label . it follows the order of Stack
(the frame designed latest will get the latest script label)
>in a particular order the frame has to get numbered in script label
i.e
either from right to left or left to right.
hope u got my point
kindly help me out
regards siv

I want to pick the Exp.GL A/c of GRN with the help of IR Doc.(INv.Verifica)

Dear All,
CAn i know how can i pick the GL Account of GRN Doc.No.with the help of Invoice Doc.No.(Inv.Verification).From which table i can take these information.
Please answer me immediately so that i can also reward point & the requirement is urgent.
Best Regards,
R.Rajakumaran

Hi,
Invoice you will have the Purchase Order no. Display the purchase order through ME23N and at the item details you can find the GRN No. Or double click on the purchasing doc no. system will display the PO.
Thanks
VK

Getting all types of files with the help of get_file_name function

hi all,
i am using Forms [32 Bit] Version 6.0.8.24.1 (Production).
i have used get_file_name function to the file name of all type of files
but i am able to get only the folders when i tried like below
:FILE_NAME := GET_FILE_NAME(NULL,NULL,NULL,'Choose a Directory',OPEN_FILE,FALSE);my requirement to get all types of files on the window(user will selects whichever way he wants)
Can i acheive it through get_file_name or i have to go for any alternative to get the file list, so that user can select by browsing the folders.
Please help.
Thanks..

hi,
in my code the select file was set to false(so showing only the directories) now i have set it to 'true'. its showing the files now.
with the help of my above shown code i can get the full path of the file.
is there any way to get only the file name?(other than the last occurance of '/' logic or that is only the way?)
Please help.
Thanks..

I've installed windows 7 with the help of bootcamp on my macbook pro 2011. Please help me how to install mac drivers for windows7 64 bit???

I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???

You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.

Implementing Transport Naming convention with the help of BAdIs (Urgent)

Similar Messages

Maybe you are looking for