Import adresses thru network?
i want to import addresses from my Addressbook on my powerbook to my new macbook. They r connected thru a small network in my home. When i connect from the macbook to the powerbook i do not see my Adressbook, nor my Applications folder . So i am at a loss as to whether what i want is possible at all and if so how. Please advice. Thx
Brick
Hi Brick.
I haven't done this process in a long while…
if you want the address from your powerbook on your macbook
on your powerbook:
1) open addressbook
2) File> Back Up Address Book…
3) choose a file name and loction (anyname, anywhere should do)
then copy via whatever means (network file transfer, usb thumb drive, email, etc.) to the macbook.
and on your macbook:
4) open addressbook
5) File> Revert To Address Book Backup…
6) point to the file on the macBook
7) voila! (hopefully)
DKR
PS: don't you just love mac simplicity ?
Similar Messages
-
i am unable to configure my ipad 2 with my existing wifi of linksys though I have entered the all ip address as per my laptop but still I am not getting thru network kindly suggest the solution
The ip-adress cannot be the same as your laptop. You have to make sure that your ip-adress is unique in the network. if your ip is 192.168.1.100 try 192.168.1.112 or somthing. More advanced is to check avalible adress in your router.
-
Import adresses to Pages from Numbers
Hi.
I have Pages 5.1 and Numbers 3.1. Can anybody tell me if it's possible to import adresses from a Numbers documet to a Pages document. I have a letter I want to send out to a lot of people. But I don't want to type the name and adress into every letter. I have all the names and adresses in an Numebers document. I don't have the name and adressen in my adressbook, and I don't want to import them to my adressbokk.Good luck getting that to work with Pages 5!
But wasn't that the point of wonderfully diminishing the functionality of Pages 5? You are complicating it all over again by looking for more software to do the same job. How many more applications are you going to need as you hit each absent function?
Peter -
How can I import adresses from my Contacts?
After Updating to Yosemite and the latest Pages Version (5.5.2) I can't import an adress into my predifined placeholders via drag&drop from my contacts.
Is there any workaround or do I have to redefine my placeholders?
Or is this a feature, Apple has removed?
Best regards,
StefanThe new version of Pages doesn't support Mail Merge anymore.
Use the old version. It should be in an iWork folder in Applications.
Or, you might try this AppleScript application: https://iworkautomation.com/pages/script-tags-data-merge.html
It likely won't replace the drag and drop feature, though. -
HP 2700 connection to my MacG4 thru network
HI! Can anyone please help me on how to be able to connect my HP 2700 printer to my Mac G4 thru wireless network?
Thanks in advance for your kind assistanceNot all printers support network printing, make sure the drivers for the drive are installed on your machine, and the machine its attached to is on.
-
Import Maxl from network file error
Hi all!
Im trying to make a Maxl import statement, using files which are inside another computer within the local network.
he issue im having is that EAS fails to open the file, which i do have access using the file system.
My script is:
import database 'CpResIvr'.'ResIvr' data from local text data_file '\\compName\export-essbase\CPResIvr.txt' on error write to
'c:\ExportErrors\CPResIvr.err';
I also tried using 'file://compName\export-essbase\CPResIvr.txt'.
The error i get in either case is 1090004 (Unable to Open file).
Any help on how do i provide the path to the file will be appretiated,
Thanks in advance!The import database is using the Essbase server's drive/folder/volume access, not your client's.
You're going to need to map that drive on the Essbase server side first.
There was a thread on this subject in the past one or two weeks -- search for it and all (well, all regarding the topic of mapping drives) will be revealed.
Regards,
Cameron Lackpour
Edited by: CL on Jun 3, 2010 11:51 AM
Here's the thread: Re: MAXL -> rule -> remote file location (unix vs windows) -
IMovie temporary files; importing fails on network home directory
Hi all,
I work in a laboratory and manage a bunch of Macs. We have a 2x2.5GHZ G5 with 4G of memory and iMovie 6. The mac has two 300 GB disks that are in a concatenated raid group, so the system has about 450GB of free disk.
The mac is bound to an Open Directory server and users have network home directories. (The network file system happens to be AFS, which is probably unusual)
The problem I am having is that whenever I am importing a clip from any external source (in this case I have tried a Sony GL-2 and an external DV deck), after about 13 minutes of importing, imovie stops importing, and iMovie displays the blue screen that you get when a video source is connected but not playing... but, the camera is clearly still playing, if I look in the viewfinder. this failure mode is completely reproducible, and always fails at the exact same place. (but works fine on another mac, see below)
I have tried saving the iMovie project onto both local disk and into the networked home directory, with the same results in either case.
I've tried the same setup on an identical mac that is not using networked home directories (local only), which works fine. I suspect that the problem has to do with the way the network file system caches/buffers, but I have no idea where iMovie keeps its housekeeping/temporary files. I was under the impression that it is all kept in the project directory, wherever you happen to create it. Are there some files that get written to the home directory no matter where you save the project?
mjp
2x 2.5 GHz G5 PowerMac 4GB RAM Mac OS X (10.4.6)iMovie doesn't have temporary files. All files are kept in the project folder (or "package").
iMovie: How to Save Projects to Another Hard Disk
http://docs.info.apple.com/article.html?artnum=93296
See "Important Considerations" at the bottom. -
Import Data over network link in oracle 11g
We want to take export of the OND schema in production database and
import it to the OND schema in UAT database over a network
link by using data pump,in Oracle 11g.Kindly share the steps.Scenario:
Directly importing the TEST01 schema in the production database (oraodrmu) to test database oraodrmt, over
a network by using database link and data pump in Oracle 11g.
Note: When you perform an import over a database link, the import source is a database, not a dump file set, and the data is imported to the connected database instance.
Because the link can identify a remotely networked database, the terms database link and network link are used interchangeably.
=================================================================
STEP-1 (IN PRODUCTION DATABASE - oraodrmu)
=================================================================
[root@szoddb01]>su - oraodrmu
Enter user-name: /as sysdba
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> grant resource to test01;
Grant succeeded.
SQL> grant imp_full_database to test01;
Grant succeeded.
SQL> select owner,object_type,status,count(*) from dba_objects where owner='TEST01' group by owner,object_type,status;
OWNER OBJECT_TYPE STATUS COUNT(*)
TEST01 PROCEDURE VALID 2
TEST01 TABLE VALID 419
TEST01 SEQUENCE VALID 3
TEST01 FUNCTION VALID 8
TEST01 TRIGGER VALID 3
TEST01 INDEX VALID 545
TEST01 LOB VALID 18
7 rows selected.
SQL>
SQL> set pages 999
SQL> col "size MB" format 999,999,999
SQL> col "Objects" format 999,999,999
SQL> select obj.owner "Owner"
2 , obj_cnt "Objects"
3 , decode(seg_size, NULL, 0, seg_size) "size MB"
4 from (select owner, count(*) obj_cnt from dba_objects group by owner) obj
5 , (select owner, ceil(sum(bytes)/1024/1024) seg_size
6 from dba_segments group by owner) seg
7 where obj.owner = seg.owner(+)
8 order by 3 desc ,2 desc, 1
9 /
Owner Objects size MB
OND 8,097 284,011
SYS 9,601 1,912
TEST01 998 1,164
3 rows selected.
SQL> exit
=================================================================
STEP-2 (IN TEST DATABASE - oraodrmt)
=================================================================
[root@szoddb01]>su - oraodrmt
[oraodrmt@szoddb01]>sqlplus
SQL*Plus: Release 11.2.0.2.0 Production on Mon Dec 3 18:40:16 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: /as sysdba
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select name,open_mode from v$database;
NAME OPEN_MODE
ODRMT READ WRITE
SQL> create tablespace test_test datafile '/trn_u04/oradata/odrmt/test01.dbf' size 2048m;
Tablespace created.
SQL> create user test01 identified by test123 default tablespace test_test;
User created.
SQL> grant resource, create session to test01;
Grant succeeded.
SQL> grant EXP_FULL_DATABASE to test01;
Grant succeeded.
SQL> grant imp_FULL_DATABASE to test01;
Grant succeeded.
Note: ODRMU is the DNS hoste name.We can test the connect with: [oraodrmt@szoddb01]>sqlplus test01/test01@odrmu
SQL> create directory test_network_dump as '/dbdump/test_exp';
Directory created.
SQL> grant read,write on directory test_network_dump to test01;
Grant succeeded.
SQL> conn test01/test123
Connected.
SQL> create DATABASE LINK remote_test CONNECT TO test01 identified by test01 USING 'ODRMU';
Database link created.
For testing the database link we can try the below sql:
SQL> select count(*) from OA_APVARIABLENAME@remote_test;
COUNT(*)
59
SQL> exit
[oraodrmt@szoddb01]>impdp test01/test123 network_link=remote_test directory=test_network_dump remap_schema=test01:test01 logfile=impdp__networklink_grms.log;
[oraodrmt@szoddb01]>
Import: Release 11.2.0.2.0 - Production on Mon Dec 3 19:42:47 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "TEST01"."SYS_IMPORT_SCHEMA_01": test01/******** network_link=remote_test directory=test_network_dump remap_schema=test01:test01 logfile=impdp_grms_networklink.log
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 318.5 MB
Processing object type SCHEMA_EXPORT/USER
ORA-31684: Object type USER:"TEST01" already exists
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE
Processing object type SCHEMA_EXPORT/TABLE/TABLE
. . imported "TEST01"."SY_TASK_HISTORY" 779914 rows
. . imported "TEST01"."JCR_JNL_JOURNAL" 603 rows
. . imported "TEST01"."GX_GROUP_SHELL" 1229 rows
Job "TEST01"."SYS_IMPORT_SCHEMA_01" completed with 1 error(s) at 19:45:19
[oraodrmt@szoddb01]>sqlplus
SQL*Plus: Release 11.2.0.2.0 Production on Mon Dec 3 19:46:04 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: /as sysdba
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select owner,object_type,status,count(*) from dba_objects where owner='TEST01' group by owner,object_type,status;
OWNER OBJECT_TYPE STATUS COUNT(*)
TEST01 PROCEDURE VALID 2
TEST01 TABLE VALID 419
TEST01 SEQUENCE VALID 3
TEST01 FUNCTION VALID 8
TEST01 TRIGGER VALID 3
TEST01 INDEX VALID 545
TEST01 LOB VALID 18
TEST01 DATABASE LINK VALID 1
8 rows selected.
SQL>
SQL> set pages 999
SQL> col "size MB" format 999,999,999
SQL> col "Objects" format 999,999,999
SQL> select obj.owner "Owner"
2 , obj_cnt "Objects"
3 , decode(seg_size, NULL, 0, seg_size) "size MB"
4 from (select owner, count(*) obj_cnt from dba_objects group by owner) obj
5 , (select owner, ceil(sum(bytes)/1024/1024) seg_size
6 from dba_segments group by owner) seg
7 where obj.owner = seg.owner(+)
8 order by 3 desc ,2 desc, 1
9 /
Owner Objects size MB
OND 8,065 247,529
SYS 9,554 6,507
TEST01 999 1,164
13 rows selected.
=================================================================
STEP-3 FOR REMOVING THE DATABASE LINK
=================================================================
[oraodrmt@szoddb01]>sqlplus
SQL*Plus: Release 11.2.0.2.0 Production on Mon Dec 3 19:16:01 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: /as sysdba
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> drop database link remote_test;
Database link dropped. -
Import attachment thru Order Import Process
Hi all,
we are importing sales order thru concurrent process : ORDER IMPORT successfully.
Now I want to import attachment attached along with order header & line level.
How it possibe thru ORDER IMPORT process ?
regards
sanjayInsert records into following tables you should be able to import attahments
p_status := 'S';
p_message := 'Attachment created successfully';
IF p_operation_code = 'INSERT' THEN
BEGIN
SELECT fnd_documents_short_text_s.NEXTVAL
INTO v_media_id
FROM dual;
EXCEPTION
WHEN OTHERS THEN
p_message := 'Unable to get short text next value';
RAISE e_stop_process;
END;
BEGIN
SELECT fnd_documents_s.NEXTVAL
INTO v_doc_id
FROM dual;
EXCEPTION
WHEN OTHERS THEN
p_message := 'Unable to get fnd documents next value';
RAISE e_stop_process;
END;
BEGIN
SELECT datatype_id
INTO v_data_type_id
FROM fnd_document_datatypes
WHERE name = 'SHORT_TEXT';
EXCEPTION
WHEN OTHERS THEN
p_message := 'While finding datatype id '||SQLERRM;
RAISE e_stop_process;
END;
BEGIN
SELECT category_id
INTO v_cat_id
FROM fnd_document_categories_tl
WHERE user_name = p_cat_name;
EXCEPTION
WHEN OTHERS THEN
p_message := 'While finding category id '||SQLERRM;
RAISE e_stop_process;
END;
BEGIN
INSERT INTO fnd_documents
(document_id,
creation_date,
created_by,
last_update_date,
last_updated_by,
datatype_id,
category_id,
security_type,
publish_flag ,
usage_type,
start_date_active)
VALUES
(v_doc_id,
p_creation_date,
v_user_id,
p_last_update_date,
v_user_id,
v_data_type_id,
v_cat_id,
4,
'Y',
'O',
SYSDATE);
EXCEPTION
WHEN OTHERS THEN
p_message := 'While inserting data into fnd documents '||SQLERRM;
RAISE e_stop_process;
END;
BEGIN
INSERT INTO fnd_documents_tl
(document_id,
creation_date,
created_by,
last_update_date,
last_updated_by,
LANGUAGE,
description,
media_id,
source_lang)
VALUES
(v_doc_id,
p_creation_date,
v_user_id,
p_last_update_date,
v_user_id,
'US',
p_description,
v_media_id,
'US');
EXCEPTION
WHEN OTHERS THEN
p_message := 'While inserting data into fnd documents_tl '||SQLERRM;
RAISE e_stop_process;
END;
BEGIN
SELECT fnd_attached_documents_s.NEXTVAL
INTO v_att_doc_id
FROM dual;
EXCEPTION
WHEN OTHERS THEN
p_message := 'Unable to get fnd attached documents next value';
RAISE e_stop_process;
END;
BEGIN
INSERT INTO fnd_attached_documents
(attached_document_id,
document_id,
creation_date,
created_by,
last_update_date,
last_updated_by,
seq_num,
entity_name,
pk1_value,
automatically_added_flag)
VALUES
(v_att_doc_id,
v_doc_id,
p_creation_date,
v_user_id,
p_last_update_date,
v_user_id,
p_seq_num,
p_entity_name,
p_pk_value,
'N');
EXCEPTION
WHEN OTHERS THEN
p_message := 'While inserting data into fnd attached documents '||SQLERRM;
RAISE e_stop_process;
END;
-- Fnd_File.put_line(Fnd_File.LOG,'The Values '||v_media_id||','||p_note);
BEGIN
INSERT INTO fnd_documents_short_text
VALUES (v_media_id,
p_note,
NULL);
EXCEPTION
WHEN OTHERS THEN
p_message := 'While inserting data into fnd_documents_short_text '||SQLERRM;
RAISE e_stop_process;
END;
ELSIF p_operation_code = 'UPDATE' THEN
BEGIN
UPDATE fnd_documents_short_text
SET short_text = p_note
WHERE media_id IN (SELECT media_id
FROM fnd_attached_documents fad,
fnd_documents fd,
fnd_documents_tl fdt,
fnd_document_categories_tl fdct
WHERE fad.document_id = fd.document_id
AND fd.document_id = fdt.document_id
AND fd.category_id = fdct.category_id
AND fad.entity_name = p_entity_name
AND fad.pk1_value = p_pk_value
AND fdct.user_name = p_cat_name);
EXCEPTION
WHEN OTHERS THEN
p_status := 'E';
p_message := 'SQL Error while updating note :'||SQLERRM;
END;
END IF; -
Hello,
I have a question reg lcm migration. Working on 11.1.2.2.300.6001
I have imported a BR (Existing BR replaced with some changes) thru lcm using Utility.sh.
In SS ( SS->Planning->App->plan type -> Calc Manager Rules) shows that particular BR got imported successfully. But when i log into workspace->calc manager i don't see that this BR is updated. I see that we have to deploy the rule from calc manager from workspace. But this deploy is modifying the currently updated BR in SS->Planning->App->plan type -> Calc Manager Rules..
I am not sure how to handle this? Was the import only imported BR into planning repository not calc manager repository? How does this stuff works? Need your inputs.
Thanks,
SDAs you observed, Calc Manager has it's own repository (just like how HBR had its own). So when you perform LCM for Planning, the rules are coming from Planning repository. These are the rules that were deployed from Calc Manager. (which means Planning copied the rules from Calc Manager repository to the Application repository).
Now for you to have both systems in sync, you'll have to update them at both places. If you think that the Planning rules are the recent ones that you want to keep, then
1. Copy paste the contents into Calc Manager rules.
or trick the system by performing an LCM for Calc Manager and replace the xmls using the ones that came from Planning. do take a back up of both (planning and calc manager rules).
Regards
Celvin Kattookaran -
Stream audio from sound card input thru network
Good Day:
I have an application where I need to access instruments at a remote location. Command/Control of the instruments is not a problem, but I also need to stream the audio present at the remote system's sound card thru the network connection. Any suggestions on how to accomplish this via LabWindows?
Thanks in advance for any replies.
-EdHi Ed,
First, I was wondering, how do you get the audio from the sound card? Is it from a LabWindows program? I've never done that. Second, I was wondering how do you play the audio on the remote machine? Is that through a LabWindows program? I've never done that either.
But I was wondering if just a remote PC app would do the job. Like admins use to take over your PC from there desk and fix problems. I assume they have these that send the audio thru the net as well as the screen. Then on the radio's PC you just need a LabWindows program to control the radio and some other app to play sound from the sound card input to the local speaker. Then the remote PC app would magically transfer the screen and audio from the radio PC to the remote PC.
Otherwise, I can just say that to stream the audio thru the net, after the Radio's PC gets it off the sound card somehow, I would just set up two TCP servers on the remote PC, one for audio and one for the commands/control. When the remote PC client connects to the audio server the audio server would just start sending audio data to the client. The client would receive the data and put it in a big buffer to handle network speed variation. Let the buffer fill up to like a second or more worth of data before having anothe function/thread read the buffer data and give the data to the client PC's sound card. Big problem is that the client PC's sound card will alway's consume the data at a slightly different speed than the servers sound card produces it. Different clocks running at slightly different frequencies. So the client function that reads the audio buffer to give it to the sound card must play games. If the buffer is shrinking over time then it has to create extra samples to give to the sound card, just duplicating a sample every 100 samples or whatever. If the buffer is growing over time then it throws away a sample every 100 sample or whatever. So it's kind of a challenge to manage the buffer with the variable speed of the net transfering data and the two different rates of producing and consuming the audio data.
LabWindows has the TCP server create and client create functions so that's pretty easy. The harder part is that you probibly want to set the Radio's PC to a fixed IP address so that you can connect to it without worrying about domain names and such. Then the two TCP ports that the LabWindows uses for command and audio might need to be setup in all the routers to let you establish a connection. Your IT guy's can answer that.
PS. you can play around with this suff on one PC by using the RegisterTCPServerEx function and setting the local host address to "localhost", or "127.0.0.1" on one LabWindows project and using the corresponding ConnectToTCpServerEx with "NULL" as the server host name on another LabWindows project. This creates a virtual TCP connection on the same machine. This does not duplicate the different audio clock issue I talked about above. -
Import Adress Book mobiles into Bento - Problem
Hi I was trying to organize myself by importing some stuff to Bento.The problem I had was that some contacts have several phone numers (work home mobile) and Bento imported work and home. So i tried to create Mobile Phone as a field but the only thing Bento does is to create an empty column, it does not import anything from the mobiles that I have in my adress Book.
Thank you very much for your help and sorry for my englishDavid,
This was posted in MacFixIt and it works perfectly:
Entourage addresses into Address Book:
1. Create a new desktop folder. Name it anything you want, but v-card would be appropriate, because that's what you will be creating.
2. Open Entourage's Addresses and select the ones that you want to bring over.
3. Drag these addresses into the v-card folder.
4. Drag the v-card folder into the Name field of Apple's Address Book. You can safely trash the folder after you are finished.
Apple addresses to Entourage:
1. In Apple's Address Book, select the addresses that you want to export to Entourage.
2. Open Entourage Address Book and drag those addresses into Entourage Address Book. If you are exporting multiple addresses, hold Option while you do this, otherwise only the topmost address will be exported and you'll have to do it one-by-one.
These methods are not perfect. You may find some minor errors, such as a Home email coming across as Work, but otherwise you'll get everything.
G5 -
Unicode import process thru sapinst
Hi All,
We are in process of CU&UC from 4.7->ECC 6.0, we have sucessfully upgraded to ECC 6.0 and in process of Unicode conversion process.
1) We are exporting the DB now thru sapinst , we had not found code page parameter for target system in General paramter and we got to know that during import we have to select target system as unicode is it ok.
2) During Import process we have to select CI and DB instance also or only CI is enough... Please suggest.....
Thanks,
SubhashHi Subhash,
During the installation of NW04, you start installing central instance and then Database instance. For NW04s, if you install the central instance and the database instance is installed together in the sapinst.
These two are always hand in hand.
Regards,
Jeff -
hi,
i have a text file and i want to import this file to data base table, how i can do that thru php?
any solution will be appriciated.
thanks
Noman ul haqthanks for your reply,
i dont want to imprt text file thru SQL Loader, i just wanted to is there any way to import text file thru PHP, because i saw an application (i.e. PHPEDITOR) which export data into excel or xml fomat. so definately there must be some process which will import data.
Noman ul haq -
Slow file opening thru network
Hi,
I've just bought a MacBook Pro 13 (may 2010) running Snow Leopard 10.6.3.
At the office we have a NAS (Network Attached Storage) for file sharing (files with 300Mb).
The connection with the server goes normaly and the navigation thru folders is also normal. However, opening files extremally slow (10 to 15 minutes to open a single 18Mb PowerPoint presentation).
If the same file is local, it opens very fast. Tried using wireless and cable, the last one is a little bit fast, but not much.
Does anybody knows a solution?
Thanks.One reason this can happen is because in Folder mode OSX creates a preview of the file. To do that, it must transfer the entire file to the OSX machine before it starts to draw the preview. If you are also transferring the file to open it, you have two simultaneous transfers going on which compete for bandwidth and crosstalk. You can prevent this by browsing non-OSX filesystems with the file preview disabled. Note that this is NOT a problem with OSX fileservers since OSX keeps a custom preview icon for fast network browsing.
Maybe you are looking for
-
How to open a new pop-up window on click of a link using OAFunctions
Hi , I have a requirement to open a new pop-window on click of the responsibility name(functions available under responsibilities). The current URL /link is driven using OAFunctions. Any idea, how can i open a new window while still keeping the paren
-
Airport Extreme and Orange LiveBox (France). No access from Internet
Hi I have bought an Airport Extreme and configure it to use BonJour and Mobileme to be able to access my connected (USB) hard disk when I am not at my home office. When I connect from other network I can see the device, but I can not access it. Actua
-
Difference between header and item movement types in MIGO
Dear all, what is the difference between movement type entered in header of MIGO and item level? not all movements are possible in header. how it is controlled? may not be in OMJJ thanks and regards gajanan
-
Hi Everybody, I am mplementing a RFC to SOAP scenario. 1)Could someone pls tell me how to configure receiver? 2) I have a wsdl provided by the receiver system company, the issue is how do i find out the target url from the wsdl given. 3)
-
Re-trigger failed proxy message after certain time automatically in CRM
Hi experts, Can anyone tell me if we can automate the process of re-triggering failed proxy messages in SAP CRM sxmb_moni, say after a certain period of time. Thanks Swapna .