Import and Export to Memory

hi guys, im currently making a program that imports and exports data into a memory so that when the user logs out that would still remain in the memory. The data would be use for the slection screen but i can't seem to make it work. Could you please help me. Or if you have other ideas on how to store data that would also be ok. The thing is when Im running the program through se38 its working fine but if i run it through its transaction code the import does not work. Please help.
here is my code:
DATA: begin of i_memory,
             memory_id(31),
           end of i_memory.
initialization.
IF p_prem IS INITIAL.
     CONCATENATE c_memory_id sy-uname into v_memory_id
                 SEPARATED BY c_underscore.
     IMPORT i_memory FROM MEMORY ID v_memory_id.
     IF sy-subrc = 0.
        p_prem = i_memory-memory_id.
     ELSE.
        p_prem = '0.04'.
     Endif.
ENDIF.
at selection-screen.
i_memory-memory_id = v_memory_obj.
CONCATENATE c_memory_id sy-uname into v_memory_id
              SEPARATED BY c_underscore.
EXPORT i_memory to MEMORY ID v_memory_id.
IF sy-subrc = 0.
Endif.
Please help. Thanks in advance guys.

Shekhar Kulkarni
I need help understanding your code.
Im trying to do same thing as you described in the post.
My main purpose is to IMPORT variant contents from cluster table VARI for all the selection screen variables dynamically.
I can IMPORT individual screen variables :: For ex :
st_key-report = 'ZNIDHS20'.
st_key-variant = 'TEST_VAR'.
IMPORT slsin_p TO TMP_VAR FROM DATABASE VARI(VA) ID ST_KEY.
This will get me the contents of slsin_p parameter in variant TEST_VAR of program ZNIDHS20.
But If I use same statement in a loop, im not able to get the data. : see below
LOOP AT i_selection_table..
IMPORT i_selection_table-name TO TMP_VAR FROM DATABASE VARI(VA) ID ST_KEY.
ENDLOOP.
I found your post interesting and started to test this way....As said, I have extracted selection screen variable table, and then tried to EXPORT the contents to Share Memory from database table VARI(VA), unfortunately program fails. Pls see code below....Pls see if you can help me out...
DATA: BEGIN OF st_key,
        report LIKE rsvar-report,
        variant LIKE rsvar-variant,
      END OF st_key.
data : i_selection_table like rsparams occurs 0 WITH HEADER LINE,
v_rsvar like rsvar-report.
st_key-report = 'ZNIDHS20'.
st_key-variant = 'VJ_TEST'.
V_RSVAR = 'ZNIDHS20'.
data : begin of itab occurs 0,
       COL1(40) type c,
       COL2(40) TYPE C,
       end of itab.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
    CURR_REPORT           = V_RSVAR
TABLES
    SELECTION_TABLE       = i_selection_table
EXCEPTIONS
   NOT_FOUND             = 1
   NO_REPORT             = 2
   OTHERS                = 3.
LOOP AT I_SELECTION_TABLE.
MOVE I_SELECTION_TABLE-SELNAME TO ITAB-COL1.
APPEND ITAB.
ENDLOOP.
EXPORT (ITAB) TO SHARED MEMORY VARI(VA) ID ST_KEY.
IMPORT ITAB = JTAB FROM SHARED MEMORY VARI(VA) ID ST_KEY.
Pls help.....

Similar Messages

Regarding import and export memory

hi, currently i have encountered this problem when i am using the import and export memory statement. After i export my table name from program1 to program2, i do an import statement at program2 to retrieve the table name but there is a problem in retrieving the name. Below are the codes.
PROGRAM1's codes:
EXPORT IO_TABLE TO MEMORY ID MEM_STR.
SUBMIT PROGRAM2 AND RETURN.
PROGRAM2's codes:
IMPORT IO_TABLE TO MEMORY ID MEM_STR.
P_TABLE = IO_TABLE.
FREE MEMORY ID MEM_STR.
CLEAR MEM_STR.

Check these programs they are working fine, the report ZCALLING calls the report ZCALLED.
REPORT ZCALLING.
DATA:
BEGIN OF IO_TABLE OCCURS 0,
MATNR TYPE MARA-MATNR,
END OF IO_TABLE.
IO_TABLE-MATNR = '38'.
APPEND IO_TABLE.
EXPORT IO_TABLE TO MEMORY ID 'MEM_STR'.
SUBMIT ZCALLED AND RETURN.
REPORT ZCALLED.
DATA:
BEGIN OF IO_TABLE OCCURS 0,
MATNR TYPE MARA-MATNR,
END OF IO_TABLE,
P_TABLE LIKE STANDARD TABLE OF IO_TABLE WITH HEADER LINE.
IMPORT IO_TABLE FROM MEMORY ID 'MEM_STR'.
P_TABLE[] = IO_TABLE[].
LOOP AT P_TABLE.
WRITE P_TABLE-MATNR.
ENDLOOP.

Internal table with Import and Export

Hi All,
Hi all
Please let me know the use of <b>Internal table with Import and Export parameters and SET/GET parameters</b>, on what type of cases we can use these? Plese give me the syntax with some examples.
Please give me detailed analysis on the above.
Regards,
Prabhu

Hi Prabhakar,
There are three types of memories.
1. ABAP MEMORY
2. SAP MEMORY
3. EXTERNAL MEMORY.
1.we will use EXPORT/ IMPORT TO/ FROM MEMORY-ID when we want to transfer between ABAP memory
2. we will use GET PARAMETER ID/ SET PARAMETER ID to transfer between SAP MEMORY
3. we will use EXPORT/IMPORT TO/FROM SHARED BUFFER to transfer between external memory.
ABAP MEMORY : we can say that two reports in the same session will be in ABAP MEMORY
SAP MEMORY: TWO DIFFERENT SESSIONS WILL BE IN SAP MEMORY.
for ex: IF WE CALL TWO DIFFERENT TRANSACTIONS SE38, SE11
then they both are in SAP MEMORY.
EXTERNAL MEMORY: TWO different logons will be in EXTERNAL MEMORY.
<b>Syntax</b>
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
On a screen, you link fields to parameters in the Screen Painter. When you define the field attributes of an input field, you can enter the name of an SPA/GPA parameter in the Parameter ID field in the screen attributes. The SET parameter and GET parameter checkboxes allow you to specify whether the field should be filled from the corresponding SPA/GPA parameter in the PBO event, and whether the SPA/GPA parameter should be filled with the value from the screen in the PAI event.
When an input field is linked to an SPA/GPA parameter, it is initialized with the current value of the parameter each time the screen is displayed. This is the reason why fields on screens in the R/3 System often already contain values when you call them more than once.
When you call programs, you can use SPA/GPA parameters with no additional programming overhead if, for example, you need to fill obligatory fields on the initial screen of the called program. The system simply transfers the values from the parameters into the input fields of the called program.
However, you can control the contents of the parameters from your program by using the SET PARAMETER statement before the actual program call. This technique is particularly useful if you want to skip the initial screen of the called program and that screen contains obligatory fields.
Reading Data Objects from Memory
To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
Saving Data Objects in Memory
To read data objects from an ABAP program into ABAP memory, use the following statement:
Syntax
EXPORT <f1> [FROM <g 1>] <f 2> [FROM <g 2>] ... TO MEMORY ID <key>.
This statement stores the data objects specified in the list as a cluster in memory. If you do not use the option FROM <f i >, the data object <f i > is saved under its own name. If you use the FROM <g i > option, the data objet <g i > is saved under the name <f i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
Check this link.
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
Thanks,
Susmitha.
Reward points for helpful answers.

Regarding import and export statement

hi experts,
how to import and export the internal table between programs...
Nice solutins with maximum points.....

Example of a program exporting an internal table to ABAP memory.
Prog 1
parameters: pa_vbeln like vbak-vbeln.
data: itab type standard table of vbak.
* get data to fill the table
select * from vbak into table itab
            where vbeln = pa_vbeln.
* now store the internal table to ABAP memory
export itab to Memory ID 'table''.
* here we call another program, prog 2
submit prog2 and return.
Prog 2 -> This imports the internal table exported by prog 1 and writes the content of the internal table to a list
data: jtab type standard table of vbak,
       wa_vbak type vbak.
* importing the itab that was exported by prog1
import itab to jtab from memory id 'table'.
loop at jtab into wa_vbak.
write:/ wa_vbak-vbeln,
        wa_vbak-erdat.
endloop.
* clear the specific memory id after required processing is complete
free memory id 'table'
Hope this solves your problem.
Cheers,
Sougata.
Subas,
Copy/paste your code, I'll have a look. First check if data is being selected before Export command.
Edited by: Sougata Chatterjee on Jan 11, 2008 12:31 PM
Also make sure you create prog2 as an executable program. Then, run prog1 with a valid Sales Order number. To understand it more clearly run it in debugging mode and step through. It should work fine in any system.
Edited by: Sougata Chatterjee on Jan 11, 2008 12:42 PM

Import and export statements

I am trying to use import and export statements in two different programs . The control from one program goes to another program with the function modules they have . I dont see the value while importing.
export i_field1 to memory id 'bus_ind'
import val1 to memory id 'bus_ind'
i gave only the memory id as common name

Please make sure that the variables used are the same name and defined exactly the same in both programs.
export i_field1 = i_field1 to memory id 'BUS_IND'.
import i_field1 = i_field1 to memory id 'BUS_IND'.
Regards,
Rich Heilman

How usnig manuplate the Import and export Key word.

How usnig manuplate the Import and export Key word? and
how do the clear of those variable?

HI ,
For IMPORT Keyword :---
To retrieve data from the global memory area, use the IMPORT statement. The most basic form of the IMPORT statement is:
IMPORT <variable> FROM MEMORY.
To give the variable a different name in your program from what it is called in the global memory area, use the TO clause. You must define the local variable name with a DATA statement in your program. The format is:
IMPORT <global var> TO <program var> FROM MEMORY.
As with the EXPORT statement, you can specify multiple variables per statement, and you have the option of specifying which cluster ID you wish to import from.
After each IMPORT statement, SY-SUBRC is set to indicate whether or not the cluster ID you specified exists (but not whether specific variables were imported specifically). SY-SUBRC is zero if the cluster exists.
It is also possible to IMPORT and EXPORT to database tables .
ABAP memory that is used to store exported data is user and transaction specific, so when passing data between programs in this manner you must make sure that transaction boundaries are not crossed. Otherwise the contents of this memory will get destroyed and will not be available to the importing program.
For Export Keyword :---
The EXPORT statement moves data from your program into a global memory area. The most basic form of the EXPORT statement is:
EXPORT <variable> TO MEMORY.
This places the specified variable into a global memory area that another program can later read using the IMPORT statement.
You may specify multiple fields in the same EXPORT statement. For example:
EXPORT KNA1-KUNNR KNA1-BUKRS TO MEMORY.
You can give variables a different name in the global memory area using the FROM clause. For example, the following code exports SY-SUBRC and gives it the name RETVAL in the global memory area:
EXPORT RETVAL FROM SY-SUBRC TO MEMORY.
You can specify a cluster ID when exporting data to memory. You can freely choose the name of the cluster ID, which can be up to 32 characters long. Each cluster ID specifies a particular area in memory. Each time you EXPORT data to the same cluster ID, all data previously written to that ID is erased. For example:
EXPORT SY-SUBRC TO MEMORY ID u2018LJS1u2019.
Hope u understand
Thanks
Shambhu

Data importing and exporting problem between BADI's

Hi Experts,
I am facing a problem in importing and exporting the data between badi's.
I am able to import and export the data between DOC CHANGE and DOC CHECK BADI's etc; but now i have a requirement to map a field from SRM to R/3.
Supplier order key field which is added to the basic data section of Shopping Cart should be mapped to the corresponding fields in R/3. I have added the field and when i am trying to map it to R/3 i am facing the probelm.
This Supplier order key field will be coming from ZBBP_CATALOG_TRANSFER badi and i am trying to map it in the Z_BBP_CREATE_PO_BACK Badi; i tried by using the below statement to export a single parameter to PO BACK badi from CATALOG TRANSFER Badi
EXPORT zsupp_ord_key FROM zsupp_ord_key TO MEMORY ID 'Z_SUPP_ORD_KEY'.
which is not working.
IMPORT zsupp_ord_key TO zsupp_ord_key FROM MEMORY ID 'Z_SUPP_ORD_KEY'. in PO BACK BADI.
Can any one please let me know why this is happening?
And i have strange problem in this ...
when a user copies a catalog which is already created then we can not map the field to R/3 PO
and again if he tries to create a cart by selecting "Old carts which are already created" we cant map field for the above two things to happen i think we need a custom coding .....
Thank you
Lokesh.

Hi Lokesh,
BADI implementations have classes for which an instance is created at runtime and hence the import and export memory logic will not work.
Please try to create a function module for these BADI and call them in these BADI's. Then go ahead with the import and export logic. This could help.
I would rather advice, to figure out an option to avoid this memory manipulations.
Regards
Kathirvel

Importing and exporting from cc premiere pro is very slow

importing and exporting from cc premiere pro is very slow, the system has i7 processor and memory is 64 gb and has internal raid storage. what could be the issue.

If you would like to test the tuning and setup of your Premiere installation go to our Premiere Pro BenchMark PPBM, the Instructions page has the download file. This single download can test Premiere 6, 7 or 8 with the identical benchmark. We maybe able to tell you why you are having problems.

How to import and export the screen parameters

hi all
how to import and export the parameters of the screen
i need to export all the parameters and then import it
and also how to export and import a variable to the memory
thanks and regards
naval bhatt

Hi,
Check this example for exporting and importing to memory..
DATA: V_VALUE(2) VALUE '2'.
EXPORT V_VALUE = V_VALUE TO MEMORY ID 'ZTEST'.
IMPORT V_VALUE = V_VALUE FROM MEMORY ID 'ZTEST'.
Thanks,
Naren

Importing and Exporting Data with a Clob datatype with HTML DB

I would like to know what to do and what to be aware of when Importing and Exporting data with a Clob Datatype with HTML DB?

Colin - what kind of import/export operation would that be, which pages are you referring to?
Scott

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

Problem with Import and Export Data Wizard

Downloaded and installed SQL Server Express 2008 R2 today because I want to explore how Access interacts with SQL Server (using my home computer). I'm using Access 2010 (under Windows 7), so the 2008 version of SQL Server Express seemed to be the version
to use.
After a couple of false starts, installation appeared to go okay. After the installation. My Start menu listed Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2. The latter listed Import and Export Data (64-bit). When I clicked that, the first Import
and Export Data Wizard page was displayed. I wasn't ready at that time to explore the wizard, so I closed it. An hour or so later I again attempted to open the Import and Export Data wizard. This time, the wizard didn't open. Instead this error message was
displayed: "The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered."
I found DTS.dll on my computer at C:\Program Files\Microsoft SQL Server\100\DTS\Binn, so the file is available, but don't know whether it is registered.
How can I correct this problem?

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

What is the best way to import and export footage from the 5D Mark II?

Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!

ascreenwriter wrote:
Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!
1. Follow the advice above. Also use the Media Browser to import the footage in case you have spanned media files. Import files with the Media Browser.
2. It largely depends on what you wish to ouput to: Blu-ray, web, etc. This FAQ gives the best answer: What are the best export settings?
3. Use the Replace with Adobe After Effects Composition function.

Looking for a program that can handel import and export of palm doc files

I am looking for a program that can handel the import and export of palm doc Files that can convert them to to either txt or RTF files for Vista 32, running Palm Desktop 7.1.
Could anyone give me a few suggestions of any plug-ins that would be good me?
Hearns
Post relates to: Palm IIIxe
This question was solved.
View Solution.

Ok, you need to clean uninstall Palm desktop 6.2. Install Palm desktop 4.1.4 and download and install documents to go version 6.
Here are the clean uninstall instructioins for Vista.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. Use the username that is on the handheld.

Error message when importing data using Import and export wizard

Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126

Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Import and Export to Memory

Similar Messages

Maybe you are looking for