Import data in dmp-files

Hello,
i have some problems with the import of data in dmp-files. As a reference i have the book "pro oracle spatial" and there i try to do the sample in chapter 11 and view the sample-data with mapviewer. i have downloaded the demodata on harddisc, created the user "spatial2" (i have already a user spatial) and now i can't get further. i have never imported data with this command (imp ...). where do i have do save the dump-files? and where are the dump-files that are listed in the book? i am really a little bit confused. maybe somebody can help. i have oracle database 10.1.0.3 on a sles9.
with kind regards
katrin

Katrin,
Go to the directory where you've downloaded the dump files.
Assuming you have a user called spatial2 with password spatial2, and your dumpfile is foo.dmp, something like this would work:
imp spatial2/spatial2 file=foo.dmp full=y
See the oracle utilities guide for more information about import/export.

Similar Messages

How do you import data base dmp file in oracle 10g

How do you run data base dmp file in oracle 10g

Examples..
Table Exports/Imports
The TABLES parameter is used to specify the tables that are to be exported. The following is an example of the table export and import syntax:
expdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=expdpEMP_DEPT.log
impdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=impdpEMP_DEPT.log
For example output files see expdpEMP_DEPT.log and impdpEMP_DEPT.log.
The TABLE_EXISTS_ACTION=APPEND parameter allows data to be imported into existing tables.
Schema Exports/Imports
The OWNER parameter of exp has been replaced by the SCHEMAS parameter which is used to specify the schemas to be exported. The following is an example of the schema export and import syntax:
expdp scott/tiger@db10g schemas=SCOTT directory=TEST_DIR dumpfile=SCOTT.dmp logfile=expdpSCOTT.log
impdp scott/tiger@db10g schemas=SCOTT directory=TEST_DIR dumpfile=SCOTT.dmp logfile=impdpSCOTT.log
For example output files see expdpSCOTT.log and impdpSCOTT.log.
Database Exports/Imports
The FULL parameter indicates that a complete database export is required. The following is an example of the full database export and import syntax:
expdp system/password@db10g full=Y directory=TEST_DIR dumpfile=DB10G.dmp logfile=expdpDB10G.log
impdp system/password@db10g full=Y directory=TEST_DIR dumpfile=DB10G.dmp logfile=impdpDB10G.log

Import Data from DMP file

I export data and create a DMP file on daily basis
I import data from this DMP to an other computer but some data import duplicate records.
I want to aviod duplicate records
what should I do

You receive duplicate errors when some unique key in the record (probably but not necessarily the primary key) already exists with a value that duplicates a value already in the database. You have at least 3 options.
1) Ignore the errors. You will get lots of errors and the duplicates will not be imported.
2) Delete all records from the tables before you do the import. Old data will be lost, but you will get no errors.
3) Use fromuser= and touser= to put the data into a different schema then use a merge to update the table data.
By the way this is not the correct forum for this question.

Error occured when importing data from dmp

Hello friends
when i am importing data from dmp file
the following error occured
Please help me to solve this
Error message :
Export file created by EXPORT:V09.02.00 via conventional path
import done in WE8PC850 character set and AL16UTF16 NCHAR character set
export client uses US7ASCII character set (possible charset conversion)
Import terminated successfully without warnings.

This is not really an error message but a information about possible character conversion from US7ASCII to WE8PC850 which should NOT be an issue since all US7ASCII characters are in most WExxx character sets.
Message was edited by:
Pierre Forstmann

How to insert data from *.dmp file to oracle 11g using Oracle SQL Develope

hi
i backup my database using PL/SQL developer and made *.dmp file
how to insert data from *.dmp file to oracle 11g using Oracle SQL Developer 2.1.1.64
and how to make *.dmp file from sql*plus ?
thanks in advance

Pl/Sql developer has a config window, there you choose the exec to do the import/export.
Find it and his home version, it may be exp or expdp, the home version is the version of the client where the exp executable is.
Then use the same version of imp or impdp to execute the import, you do not need to use Oracle SQL Developer 2.1.1.64. If you want to use it, you must have the same version in the oracle home that exp/imp of sql developer use.

How to create the Export Data and Import Data using flat file interface

Hi,
Request to let me know based on the requirement below on how to export and import data using flat file interface.....
Please provide the steps involved for the same.......
BW/BI - Recovery Process for SNP data.
For each SNP InfoProvider,
create:
1) Export Data:
1.a) Create an export data source, InfoPackage, comm structure, etc. necessary to create an ASCII fixed length flat file on the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
1.b) All fields in each InfoProvider should be exported and included in the flat file.
1.c) A process chain should be created for each InfoProvider with a start event.
1.d) If the file exists on the target drive it should be overwritten.
1.e) The exported data file name should include the InfoProvider technical name.
1.f) Include APO Planning Version, Date of Planning Run, APO Location, Calendar Year/Month, Material and BW Plant as selection criteria.
2) Import Data:
2.a) Create a flat file source system InfoPackage, comm structure, etc. necessary to import ASCII fixed length flat files from the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
2.b) All fields for each InfoProvider should be mapped and imported from the flat file.
2.c) A process chain should be created for each InfoProvider with a start event.
2.d) The file should be archived in the
ctnhsappdata\iface\SCPI063\Archive directory. Each file name should have the date appended in YYYYMMDD format. Each file should be deleted from the \Out directory after it is archived.
Thanks in advance.
Tyson

Here's some info on working with plists:
http://developer.apple.com/documentation/Cocoa/Conceptual/PropertyLists/Introduc tion/chapter1_section1.html
They can be edited with any text editor. Xcode provides a graphical editor for them - make sure to use the .plist extension so Xcode will recognize it.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Import data from excel file

Hello.
Is anybody can help how to import data from excel file to the form created with designer 7.0. Originally there is a script inside the form to populate drop down list and depending from data selected in the ID number drop down list, there will be filled out the description and the prices text fields. But now I have to modify this form with data from excel file, which has more than 30000 lines and put all this data to script is too much.
So, can somebody know how can I after filling the ID number field , populate the description and price text fields with data from excel file corresponding to this ID number ?
This form is used in Adobe reader.
Any comments are welcome.
Regards,
Aivar

Hi
That's what i said in my prev. Post to clear cache... :)
disable your cache from nqsconfig.ini
In cache section of NQSConfig file,
you find
ENABLE = YES;
set to NO
OR
if you are using data ware house as the source for OBIEE,
you know that when ETL is done, so just create iBot to purge cache automatically at that particular intervals,
So that report runs freshly at that time
And what happened to your View Selector question?
Edited by: Kishore Guggilla on Jul 3, 2009 3:52 PM

Import data from excel file - best practice in the CQ?

Hi,
I have question related to importing data from excel file and creates from those data a table in the CQ page. Is inside CQ some OOTB component which provides this kind of functionalities? Maybe somebody implement this kind of functionality or there is best practice to do this kind of functionalities?
Thanks in advance for any answer,
Regards
kasq

You can check a working example package [1] (use your Adobe ID to log in)
After installing it, go to [2] for immediate example.
Unfortunately it only supports the old OLE-2 Excel format (.xls and not .xlsx)
[1] - http://dev.day.com/content/packageshare/packages/public/day/cq540/demo/xlstable.html
[2] - http://localhost:4502/cf#/content/geometrixx/en/company/news/pressreleases/my_personal_bes ts.html

Extra column to be added while importing data from flat file to SQL Server

I have 3 flat files with only one column in a table.
The file names are bars, mounds & mini-bars.
Table 'prd_type' has columns 'typeid' & 'typename' where typeid is auto-incremented and typename is bars, mounds & mini-bars.
I Import data from 3 files to prd_details table. This table has columns 'pid', 'typeid' & 'pname' where pid is auto-incremented and pname is mapped to flat files and get info from them, now i wanted the typeid info to be received from prd_type table.
Can someone please suggest me on this?

You can get it as follows
Assuming you've three separate data flow tasks for three files you can do this
1. Add a new column to pipeline using derived column transformation and hardcode it to bars, mounds or mini-bars depending on the source
2. Add a look task based on prd_type table. use query as
SELECT typeid,typename
FROM prd_type
Use full cache option
Add lookup based on derived column. new column -> prd_type.typename relationship. Select typeid as output column
3. In the final OLEDB destination task map the typeid column to tables typeid column.
In case you use single data flow task you need to include a logic based on filename or something to get the hardcoded type value as bars, mounds or mini-bars in the data pipeline
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Import a 10g DMP file into a 9.2.0.5 instance

Is it possible to import a 10g DMP file into a 9.2.0.5 instance? Thanks
in advance for your thoughts.

No, do NOT run the catexp.sql from 9i in your 10g db! That was only a valid method with Oracle 6/7 and Oracle 7/8!
Just use the Oracle 9.2 version of exp to create the dumpfile from the 10g database. You can use SQL*Net to connect to the 10g db from your 9.2 server connecting like system/manager@tnsname. Then use 9.2 imp to import the dumpfile into your 9.2 db.
If you have access to Metalink please refer to the following note for full details on compatibility between Oracle releases for exp/imp: 132904.1

Import the database dmp file

hello friend
what is the process import the database dmp file into oracle application express.
i want to import the database dmp file into the http://apex.oracle.com/ online workspace .
it is possible ? please help me how to complete this process .
regards
vicky........
Edited by: vicky....... on Dec 5, 2010 9:30 PM

Hi,
You can't import dump file to apex.
For importing you have to take your database in sql script and run it on apex.
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1

Ssis - import data from flat file to table (sql server 2012)

i have create a ssis for importing data from flat file to table in sql server 2012.
but i got the below error for some column in data flow task.
error: cannot processed because than one code page (950 and 1252)
anyone helps~

Hi,
The issue occurs because the source flat file uses ANSI/OEM – Tranditional Chinese Big5 encoding. When processing the source file, the flat file connection manager uses code page 950 for the columns. Because SQL Server uses code page to perform conversions
between non-Unicode data and Unicode data, the data in the code page 950 based input columns cannot be loaded to code page 1252 based destination columns. To resolve the issue, you need to load the data into a SQL Server destination table that includes Unicode
columns (nchar or nvarchar), and convert the input columns to Unicode columns via Data Conversion or the Advanced Editor for the Flat File Source at the same time.
Another option that may not be that practical is to create a new database based on the Chinese_Taiwan_Stroke_BIN collation, and load the data to non-Unicode columns directly.
Reference:
http://social.technet.microsoft.com/Forums/windows/en-US/f939e3ba-a47e-43b9-88c3-c94bdfb7da58/forum-faq-how-to-fix-the-error-the-column-xx-cannot-be-processed-because-more-than-one-code-page?forum=sqlintegrationservices
Regards,
Mike Yin
TechNet Community Support

Importing data from Flat file

Hi all Experts,
I am a ABAPer and trying to learn BW by my own. I wanted to import data from flat file and generate some reports on that.
Can anybody tell me the steps starting from the infocubes(guess its the first step), to achieve it. Any help will be a great help for me.
Thanks in Advance,
Smita

1.to start with create infoareas, infoobjects(accoring to what u have in flat file).
2.then create a cube which will include these infoobj's and activate it.
3.create an application component and then create infosource,right click and assign ds to infosource and specify ur PC file source system(whatever system u've), 4.then u'll go to the infosource screen where u need to maintain the exact order of ur file in transfer structure tab, then maintain transfer rules, activate it.
5.create upate rules for ur cube by mentioning this infosource name.
6.create infopackages and schedule them. after data is loaded to cube, use tcode rrmx and logon to bex and find ur cube and then create queries on them.

How to find which date's dmp file is loaded

Hi experts,
I have many export dmp files for all the dates.I refreshed the database with Nov'8 th dmp file,now i want to conclude that which date's dmp file[Nov 8th or Nov 9th like that] has been loaded to my database.Is there any way to find out that details?
Thanx in advance,
Senthil

I'm pretty sure there isn't, unless you simply create a small table in the database with the current sysdate in it, before you do your export.
Also depends whats in your export - is it a full db?

Import data in dmp-files

Similar Messages

Maybe you are looking for