Import Enterprise Service into Repository and Enhance Service

Hi experts.
We've activated with transaction SOAMANAGER a enterprise service discovered in ENTERPRISE SERVICE WORKPLACE in SAP BACKEND.
In SAP PI we created a external definition from WSDL definition and we've developed a SOAP to SOAP scenario where SOAP receiver is pointing  to this service. Everytring is working fine but I have some doubts.
1. Is that the best way to proceed? Should I have to import metadata in someway from enterprise service workplace into repository and not create a external definition from import wsdl retrive in ENTERPRISE SERVICE WORKPLACE?
2. Now we have a new requriment and we have to add to a new field into response message. So we need to enhance the enterprise service. How we can get that?
Thanks a lot.
Regards.

Hi.
We're using 7.11.
First question resolved. In this guide is explained how to enhance a standard enterprise service:
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0bb5687-00b2-2a10-ed8f-c9af69942e5d?QuickLink=index&overridelayout=true]
One of the steps is create a enhanced data type from original data type and then import this enhanced data type to backend with SPROXY transaction. Then you can enhance the standard code with BADIs. But my question is, how I import to SAP PI repository the metadata of a standard enterprise service (data types, message types, service interface). I'm using the enterprise service SupplierERPBasicDataByElementsQueryResponse_In.
[http://esworkplace.sap.com/socoview%28bD1lbiZjPTAwMSZkPW1pbg==%29/render.asp?id=E84CA2C09A8411DD2B8D000F20FCB6A9&fragID=&packageid=DE0426DD9B0249F19515001A64D3F462&iv=]
Regards.
Thank u so much.
Edited by: Christian  Abad Chico on Feb 21, 2012 9:03 AM

Similar Messages

  • I am importing a cd into itunes and it is creating 4 different albums. How can I get it all in one album?

    I am importing a CD into itunes and it is creating 5 different albums.
    1 album for most of the songs and 4 other albums for single songs from
    the CD. How can I get itunes software to put all the songs into 1 album?

    Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
    tt2

  • Imported slide show into PE11 and some pics rotated unexpectedly, How can get back to horizontal?

    Imported slide show into PE11 and some pics rotated unexpectedly, How can get back to horizontal?

    winkhi
    Just what are the pixel dimensions of these photos that are automatically rotating on you in Premiere Elements 11 workspace after being transferred there from the Elements Organizer Slideshow Editor? Do I have that correct? If so, how are you making the transfer....Edit with Premiere Elements Editor, Burn to Disc, or other as Elements Organizer 11 Slideshow Editor output?
    What is the scenario...from the camera to the computer hard drive, landscape; from the computer hard drive to the Elements Organizer 11 Slideshow Editor, landscape; from the Elements Organizer 11 Slideshow Editor to Premiere Elements 11 Project Assets/Timeline, rotated to Portrait?
    Do you find that the frequency of the problem is related to pixel dimensions, number of photos used? What is the format of these photos, jpg or other?
    Are you using the Rotation option in the Applied Effects Tab/Applied Effects Palette/Motion Panel expanded to correct the photo rotation?
    Just some thoughts for now.
    ATR
    ATR

  • Subtitle workflow. Is it possible to import srt files into premiere and then export to Encore?

    Hi, I'm editing a series of short documentaries that wil be published in DVD with subtitles, and I'm wondering if there's any way to import srt files into Premiere and then export the project to Encore.

    You can easily (and better, IMHO) do what you want in Adobe Prelude.  It's part of the CC subscription, and may have been included with CS6.
    Open the Ingest panel, navigate to the external drive where you have your source clips, make the thumbnails in the Ingest panel comfortably large, click a video clip to enable scrubbing, and use the J-K-L keys to navigate playback through the clips.  Put a check mark on the clips you want and be sure to select and set up the Transfer option on the right side of the panel before ingesting.  Don't select the Transcode option.
    Cheers,
    Jeff

  • I've imported a CD into iTunes and it doesn't show up anywhere

    I've imported a CD into iTunes and it doesn't show up. iTunes can't find the album or artist or any song. But when I go to re-import the CD, it says it already has those music items. How can I fix this so the new CD shows up in iTunes?

    Does it show in your "Recently Added" playlist?

  • Dreamweaver Can I import muse pages into Dreamweaver and "up grade" them

    Dreamweaver Can I import muse pages into Dreamweaver and "up grade" them
    Muse is terrific for basic pages, but forms, and scripts require more capability
    Also is there anyone watching this who does freelance work on web design?

    13:46:44
    Thanks Murray
    Yes I have looked at the Muse code and also looked at it in a plain html editor, (Been using Arachnophilia for about 15 years)
    and the code is a mess.
    You are dead right. I figured I would start with Muse to get some of the concepts sorted out, and that has worked, but I know I will need to use DW for my main site
    CanLaw has about 1500 pages all done in html with tables….
    time to play catch up
    Ton of work, but I have a masochistic bent anyway
    But in the long run life will be simpler if I make the effort now.
    Kirby
    [Promotional material removed by moderator]

  • Import text file into repository

    Hello,
    I have created the physical data model in Designer 10g.  I was given the table and column descriptions in an excel spreadsheet.
    Is there any way I can import these descriptions into the repository?
    Thanks
    Cathy

    Hi
    I actually can't answer your question because I'm having quite similar problems. But maybe you haven't created the correct table defs (index, and so on).
    By the way, how have you done to export the database to a txt-file. I can't do this and don't know why. Is it posible that you post your vi? this would be great.
    Do you have a good book or example about ActiveX and MSAccess? I can't find anything and the tutorials couldn't help me.
    Thanks and I hope my tip could help you.
    Yves

  • Imported ESS BP into NWDS and views of the components displaying diff lang

    Hi All,
    We have uploaded the new ESS Webdynpro based BP 600 and we have configured that in NWDI and i imported that one into my NWDS.  But as i created the project for the Cat(timesheet one), all the views are displaying a different language other than english. 
    How can we change this to english and why is it coming so
    Please guide me.....
    Thansk & Regards,
    Ravi

    Ravi,
    is it happening for all the users.
    if yes check the iview property and see what language is set.if not then check the language of that user in SU01 in backend
    Thanks
    Bala Duvvuri

  • Importing Synth Names into Logic and the "environment"

    Logic 7.2, OSX.4.something...
    I'm brand spanking new to Logic (migrating from Opcode's Vision...) and I have 3 questions:
    1) The Environment: I've read the user manual chapter on "The Environment" and I'm totally lost. Is there not a way that Logic can read what's attached to it via your MIDI interface/OSX MidiCore setup and create an environment based on this automatically? This would be a good starting point at least, but there's no mention in the manual of this function and it seems crazy that one would have to create each instrument, define each channel and so on down the line.
    2) Once my synthesizer and their channels are defined how do you get synthesizer patch names into logic such that when I pick an instrument from the track or arrange window, I can see a list of all patches available in any given bank for that instrument and pick my sound (ie: send the bank or program change message....) This is not explained anywhere that I could find and I'm curious if there's a way to import via sysex or a universal librarian. I'm an old school Opcode Vision user and I have patch names for all my gear and I can't imgine having to type all the names and even if I did, there's nothing that explains how to do this and assign patch change and bank change commands. Can sombody explain or point me to a resource that explains in laymans terms how to set up ones MIDI environment based on their MIDICore setup and get patch names to come through.
    3) Librarian: I can't find anything that talks about a way to manage patches and instruments within Logic and I need some method of being able to manage and get patches into Logic. Does Logic have a librarian or do I need a 3rd party program? If it doesn't have this, can somebody suggest a program that would meet this function and integrate with Logic such that I can import and manage patches?
    I hope this makes sense to somebody....
    Thanks WAY in advance....
    G4800 quicksilver Mac OS X (10.4.7) Dual boot system

    Hi and welcome fellow former Vision user. I too came from Vision a couple years ago
    to answer
    1) Yes, the 1st time you open logic it looks at your audio midi setup (AMS) to make a basic environment from the info there. if there no hardware synths listed there they will not show up in Logic. Unfortunately Logic does not come with any synth device lists to add to your AMS so there is none to choose from. you will have to define them or you can use the MOTU list. you can download a copy here http://www.digicake.com/midnam/ download the MOTU.sit MOTU uses these midnam files for bank and patch change info. Unfortunately Logic does not use the bank and program information in them, it sure would make setting Logic up much easier
    2) To Get patch names into logic you can type them in one by one or use a word processor doc to import the names Pages 216 and 217 of the manual explain this
    3) Librarian? well sort of... Emagic had one called SoundDiver that I think is still in beta testing for OSX but I am not real familiar with it do a google search and see what you come up with
    I am hoping that someday Apple will use .middev and .midnam files to address outboard synths the same way DP does. That is why I use DP when I want to make standard midi files for outboard synths. DP is very similar to Vision in that way. but for everything else Logic rules

  • Importing home dvd into iDVD and tweaking it?

    I have some home movies that I burnt to dvd using a commercial dvd burner. now I would like to import the movie into imovie or idvd and add chapters, a theme, etc. Is this doable? If so, how? Thanks for any help you can give me.
    G4 dual 800   Mac OS X (10.4.9)  

    DVDs are in a socalled delivery format (mpeg2), which isn't meant and made for any processing as editing...
    avoid lossy inbetween formats, as mp4 ...
    for using the iLife apps, you have to convert'em first, in recommended order, choose one of the following tools/workarounds:
    * DVDxDV (free trial, 25$, Pro: 90$)
    * Apple mpeg2 plugin (19$) + Streamclip (free)
    * Cinematize >60$
    * Mpeg2Works >25$ + Apple plug-in
    * Toast 6/7/8 allows converting to dv/insert dvd, hit apple-k
    * connect a miniDV Camcorder with analogue input to a DVD-player and transfer disk to tape/use as converter
    none of these apps override copyprotection mechanisms as on commercial dvds...
    http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
    http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml

  • Importing text file into search and redact window.

    I am in the search window under the search and redact tool.  I
    am trying to import a file that was originally an excel to populate the
    search multiple words window.  I read that text files can be imported.  I saved the file as a text file but it does not import.  I can import an adobe file but this gives me a list with a bunch of junk.  What am I missing?

    The dialog imports text files.
    Make sure that the file you are importing is a text file and has one word in every line.

  • Importing Captivate movies into FrameMaker and RoboHelp

    Does anyone know where I would find step-by-step instructions
    on how to integrate Captivate movies into FrameMaker and
    RoboHelp?

    Hi Jay
    See if the links below help any.
    Link
    number one
    Link
    number two
    Cheers... Rick

  • I imported my pictures into iPhoto and they were all there. I checked again a few minutes later and they weren't all there. What should I do?

    I need to import my pictures to iPhoto, and I imported my camera roll. It was all good and all the pictures were uploaded and then I checked again a few minutes later and they weren't all there. What should I do?

    Get a flashlight and see if there is something stuck in the iPhone jack you can remove and do so if you can.
    If not, make a Genius Bar appointment at your neares Apple Store. Backup your iphone before you go.

  • Import Enterprise Services Model

    Hi all,
    I try to import a ES-Model but I got only folowing exception:
    Plugin name: Web Dynpro Model Editor Services
    Plugin ID: com.sap.ide.webdynpro.service.modeleditor
    Class:
    com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog
    Message:
    Internal error - see detail information in exception trace.
    Exception:
    org.eclipse.swt.SWTException: Failed to execute runnable (com.sap.tc.col.client.generic.core.GCPRuntimeException: service manager initialization failed Caused by:
              Error Text     ߽��M��n���랄덴�n��^�������N������N9�:�>:�n��N�랄�
    Can anybody help me?

    Hi
    We are also facing same problem. Were you able to solve this problem?
    Regards
    Saurabh Garg

  • Import .par file into NWDS and Rum it without deploying ?

    Hello All,
    I'm new to the NWDS and the Portal.
    I've many Qns on my Requirement. Hope u guys can help me out in resolving my Issues.
    Is this  the right forum to place my Query ?
    If not then please let me know the right forum .
    My Requirement is like this :-
    1. I need to create a Portal Application which calls an URL.
    2. But before developing this, my Client gave me one 2 options :
         a. He gave me a par file and asked me to make  changes in it.
         b. Create a new Portal Project which calls the URL ( Predefined ).
    3. I wanted to check the 1rst option i.e  " a ".
    4. I tried to Import the .par file into NWDS like this :
    * Windows --> Open Perspective --> Enterprise Portal .
    * File --> Import --> Par FIle.
    * I gave the name of the Project as PortalLogon.
    5. I searched in the forum on this scenario and I found that the libraries for this project are not automatically imported.
    <b>A .Can any one tell me how to import the libraries and which are all the libraries to be imported ?</b>
    <b>B. How to test my PortalLogon Project without deploying ?</b>
    Is it possible to test this Project without deploying ?
    If yes can anyone tell me hoe to do this ?
    Regards,
    Deepu.K

    Hi Deepu,
    Usually Server will be having all the jar files and If you want to deploy your par file using NWDS you need to give a path to your Jar file location.
    So better download all the jar files from your server and keep it in your local desktop.
    Create a new folder called "JarFiles" in your desktop and keep all of your jar files inside.
    Download Jar finder from IBM Site ( search for "Resolving Java Classpath Issues" in SDN ,you will get a pdf and follow it.).Add it as a plugin to your NWDS path.
    Restart NWDS.
    Now you can resolve the jar file issues.there are many weblogs /articles/forum QAs regarding this.
    If u need more clarification,please let me know.
    Thank you.
    Regards,
    Karthick Eswaran

Maybe you are looking for