Import HTMLResources in Dashboard is not working

Hi guys,
I'm importing updated HTMLResources.zip as per
http://helpx.adobe.com/digital-publishing-suite/help/import-htmlresources.html
but every time I'm opening updated folio there is old content in there.
I copied working folio into the new one and trying now to replace the content inside this new test folio without changing the article that this content is called from.
Thanks,
Gennady

I'm a litle confused. You can't publish from InDesign. You can create folios that show up in ACV via the ADC "bridge" function but they aren't "published". You publish folios from the folio producer. Which are you talking about here?
If you create a folio in folio builder panel, upload an htmlresources file and view it via the ADC bridge, subsequent uploads of new htmlresources should get reflected on device when you download the folio again.
If you create a folio in FBP, upload an html resources file, publish it and view it on device. If you upload new versions of htmlresources you need to update the pubished folio in folio producer and check the box that says update contents.
The ADC folio and hte published folio have different icons in the adobe content viewer. One shows up with a blue sash with a lightning bolt on the sash (the ADC folio)

Similar Messages

Safari, dashboard & help not working after 10.4.9

I have loved my iBook since day 1, until 10.4.9. This is my first Apple computer and I was very close to being a convert. I updated through sys prefs to 10.4.9 and now: Safari opens for a split second then closes with kernel errors (or I least I assume from the crash log), no more widgets and dashboard does not work and help files do not work. What gives? I tried downloading the combo update but it was a .exe file. Forgive my lack of tech know how, I know some, enough to get me in trouble evidently. Any help would be greatly appreciated. I have tried booting into safe mode, Safari does the same thing, I have tried repairing permissions in safe mode and in regular mode as admin, nada. HELP!

I originally updated through sys pref and just let it go. One day later things stopped working. Repairing permissions etc did nothing. Applied the combo update, verified the disk before hand, repaired permissions after the update and reboot, now things are back to normal as far as I can tell, better even in some areas. Hope this can help others with similar problems.

Dashboard Widgets not Working or Updating

I have a 3 week old Macbook Pro and I noticed about a week ago that my dashboard apps not working. I have researched and have not found a solution to the problem. Any help?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Dashboard widgets not working. I trash the dashboard .plist and redo all widgets then after a restart. Widget not working again.

Dashboard widgets not working. I trash the dashboard .plist and redo all widgets then after a restart. Widget not working again.

Yes hello,
My widgets are not working as well, i looked on forms and it seams that the 10.5 update fix there problems. I also did an archive and install from 10.4... One of the major reasons i purchased the upgrade was to use widgets to clip parts of safari, i'am totaly bummed because all forums i find end with the question un answered. i'am a little bummed becuase there are a couple of things that worked with 10.4 that are not working in 10.5 (like some meg moives not playing.
i do not wish to create a new account because i do not want to reinstall all my software, photoshop, final cut, dvd studio pro.. etc.
i hope to find the fix some how.
I have opened up the console application and when i select widgets load or delete them i see no activity in the console. I'am not familiar with the console app. or command lines.
is there any more info on this matter? is there any support from apple?
Thankyou

Dashboard does not work today.

I have upgraded both my MacBook Air and my Mac Mini to OS 10.9.2.   The Air works just as it did in 10.9.1. Dashboard works on the Air.   But Dashboard on the Mini does not operate. I click on the Dashboard icon in the Dock. Nothing happens. I click and hold on the Dashboard icon. The pop-up menu appears. In that menu I click "Show Dashboard." No response. I click "Dashboard Preferences," and I get the Mission Control Preference. Here is how that appears:
I do not see anything here that would disable Dashboard.
Does anyone have any idea as to why Dashboard does not work in 10.9.2?
TIA

Hi Richard,
Thanks for visiting Apple Support Communities.
If Dashboard does not launch on your Mac Mini, you may want to see if the behavior occurs in a new user account. This article is a good guide for troubleshooting:
Isolating an issue by using another user account
http://support.apple.com/kb/TS4053
If the same thing happens in a new user account, I recommend reinstalling Mavericks:
OS X Mavericks: Reinstall OS X
http://support.apple.com/kb/PH13871
Best Regards,
Jeremy

Dashboard Console not working - opesntack on Oracle Linux 6.6

I have installed openstack using the instructions at http://www.oracle.com/technetwork/server-storage/openstack/linux/documentation/oracle-openstack-user-guide-2296176.pdf
I have a Oracle Linux 6.6 as the controller and two nodes of Oracle VM 3.3.2 as compute nodes. I managed to get an instance up and running but not sure how to connect to those instances. When I navigate to the console tab of the instance vnc connects successfully the be screen is blank and I think its not accepting any keyboard inputs as well.
How do I get the console to work from the dashboard (or connect via a vnc viewer)? Alternately I have used DHCP in the instance and know the private IP of the instance (192.168.1.100), how do I ssh to the instance?
Amish.

Hi Amish,
I saw your comment in other thread and I'll try to answer your questions in the best way I can - but this is huge topic. Please keep in mind that I'm also newbie in this area too and I've encountered many problems getting basic OpenStack installation working, like you. Some of them are still not solved for me either. I also did not get any help here
Networking in OpenStack is IMO difficult to understand, especially for people like me who are accustom with traditional approach. So this is how I understand it now:
Networking can be purely software driven and in this case it is carried out by openvswitch (http://openvswitch.org - better get accustom with it if you are not yet). Simple linux bridge - utilized by Oracle VM - is not used by OpenStack. Also there can be hardware plugins which can move some of network features to hardware - but I have no experience in this area.
There are two types of networks you can create in OpenStack: provider and tenant one:
Provider networks (also called flat networks) are equivalent of what you set in Oracle VM Manager and in typical (old fashioned) IT world. These are networks which in OpenStack are defined by cloud administrator (You) and bound to existing physical network which are already set by network administrator. For example you have couple of ports on your servers connected to LAN switches, some of them are in access mode some are trunks of specific VLANs. Also routers and other network services are managed outside of your cloud.
You need to define these networks in OpenStack before any user can connect their VMs to them. The most important part is that can do this from the GUI .
On the other hand there are so called: tenant networks. These are networks which are under cloud user administration. These are like cloud private networks (if you know Ops Center or Exalogic there is similar notion there) - which are created on-demand by your users. You as cloud administrator only create some limits (quotas) regarding how many such networks can be created by user. But obviously you - as cloud administrator - also need to define mechanisms which allow such networks be created on demand. This also has to be done from command line by editing some files - before users can create tenant networks.
The mechanism I'm talking about can be: VLAN, VxLAN, GRE.
First one is the only one currently supported by Oracle and it is quite simple: you, in cooperation with your network administrator reserve range (or set) of traditional VLANs and configure them on network switches where your servers are connected (I mean server ports which you dedicate for tenant networks - not all because you need other network for management, etc). Then you define this set in some OpenStack files to let it manage them on its own. For example: you have got 20 VLANs from network department for exclusive use for your cloud. Nobody knows what each VLAN will be used for yet. This will be allocated by cloud users on-demand. Openstack will just allocate VLAN upon user request and will not allow other users to create their private networks on the same VLAN.
Better approach is to use VxLAN which is tunneling mechanism. You don't need pool of VLANs in this case but you just set tunneling rules and then OpenStack creates private networks using secure tunnels over L3 network which you define first. VxLAN is standard, you can read about it and it is used by OpenStack for Solaris. Unfortunately this did not work for me and Release Notes from Oracle OpenStack for Linux says that it is not supported yet.
There is also GRE - which is also tunneling and is similar to VxLAN - but it did not work for me either.
Where it is all configured? Basic setup is created by packstack using CONFIG_NEUTRON_OVS_* variables. However I used packstack only for installation and then I modified configuration files on all nodes. The most important file where configuration is kept is: /etc/neutron/plugin.ini. In this files you set framework on which provider and tenant networks are build. The most important section is [OVS], for example:
[OVS]
enant_network_type=vlan
enable_tunneling=false
integration_bridge=br-int
bridge_mappings=physnet1:br-eth3
network_vlan_ranges=physnet1:2032:2032,physnet1:3010:3020
This example is from compute node. It says: I have one physical network: physnet1 which is supported by virtual switch called br-eth3. You need to create this virtual switch on your own! OpenStack networking deamons (Neutron) do not create virtual switches - they only reconfigure them if needed. Physical network is just name which you can use later on if you setup provider network.
Also, in the example you tell OpenStack that you have 11 VLANs available on physnet1 network. Similar configuration has to be done on controller node (but it is only because in simple topology your controller is also network node)
Then I dedicated first VLAN: 2032 for provider network. This was accomplished by command issued on controller node.
# neutron net-create --router:external=true --provider:network_type=vlan --provider:physical_network=physnet1 --provider:segmentation_id=2032 labnet
From that moment this network (called "labnet") should appear in the GUI and you can connect VMs to it. Users might also do this if you mark it as "shared".
Also users should be able to create their private networks and this will allocate VLANs from 3010 to 3020 - so there can be only 10 private networks created totally in your cloud now.
Of course this is example and you can build completely different setup. You can use different ports for provider networks and for tenants one. You do not need VLANs for provider networks and theoretically for tenant too - but you would have to have plenty of ports for this. If you manage to get VxLAN working - then please share your experience here.
I strongly recommend reading following information sources (Oracle does not provide this details in their documentation):
OpenStack Docs: Current
https://developer.rackspace.com/blog/neutron-networking-the-building-blocks-of-an-openstack-cloud/ there are more blog entries (followups) on this topic - look for them using keyword "neutron"
https://www.rdoproject.org/forum/discussion/875/does-rdo-support-flat-network-type-/p1
As for blank VM console:
I've also had this problem when I used Cirros VM images. However when I imported the template I use on my Oracle VM - then console was working correctly. I think this is more connected with VM configuration then OpenStack. AFAIK you can connect to console directly using vnc client - at least you can configure Nova in that way that it allows external VNC connections.
Regards,
Michal

Import jpg in PRE13 is not working

I just downloaded Premiere Elements 13 to create a slideshow. Whenever I try to import my jpg files, I get an error message.
I resized all files to 4096x2731 pixels with PS Elements 9 but it is still not working. Does anybody know how I could fix this problem?
Thank you for your support!

Lena
1. First thing, I need to make sure we are in sync on...where are you trying to create this slideshow?
I have been assuming in the Elements Organizer 13/Create/Slideshow workspace. Is that correct?
2. If so, open Premiere Elements 13 Editor to its Expert workspace, and import these problematic jpgs into a new Premiere Elements Editor project, using Add Media/Files and Folders/Project Assets. Do you get that far without any errors?
3. Can you open jpg stills with no raw image origin in Premiere Elements 13 Editor or Elements Organizer 13/Create/Slideshow?
Thinking ahead to another mini test..
For troubleshooting purposes only at this time, can we take Lightroom out of the equation?
Will your original raw image import into the Camera Raw version that you have in Photoshop Elements 9? If so, import the raw image there, edit in the Camera Raw dialog, from Photoshop Elements save as jpg and resize jpg. Does that jpg from Photoshop Elements now import without issue into Premiere Elements 13 Editor and or Elements Organizer 13.
We will be watching for further developments.
ATR

Import of Word Document is not working

Hello, I wanted to import a word document but it is not
working. Draging droping is not working (just puts me link) and
through the menu (File > Import > Word Document ... ) is not
working.
Does somebody knows why.
Here is an image:
Image
Dreamweaver Menu

Good catch! Thanks, Alan.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Alan" <[email protected]> wrote in
message
news:C5B334E2.31EDC9%[email protected]..
> your first screenshot-
>
>
http://www.janik.cc/b/dreamweaver-word-im.jpg
>
> shows an icon in the bottom bar for OpenOffice.
>
> Does that machine have Word installed?
> Dreamweaver doesn't import the .doc file directly, it
uses part of Word to
> do it. If Word is not installed, the Word import into
dreamweaver will not
> work.
>
> --
> Alan
> Adobe Community Expert, dreamweaver
>
>
http://www.adobe.com/communities/experts/
>
>
>

Dashboard is not working, HELP ME!

Hi,
I am running OS X 10.5.2 and dashboard isn't working, It opens and the X appears, I can click on the X and the widget dock pops up but when a click on one dashboard closes. The only widget that opens is the one called "Widgets". Can anyone help me I've tried Yahoo! Answers but nothing there.

Could be a messed dashboard preferences file. In your home folder, under Library/Preferences/ you have a file called com.apple.dashboard.plist. This is the the dashboard preference file. You can move that file out of that folder, then launch dashboard again. This will recreate the preferences file with defaults.
Note, however, that this will in effect remove whatever preferences you had previously configured. That is why I suggest moving that file out of that folder rather than deleting that file. If this doesn't work, you can simply restore that file to its proper location.

Dashboard Prompts Not Working in OBIEE 10g

Hi People,
I developed a report with two dimension column and a fact column.
NBTY Level 1
NBTY Level 2
Spend Amount
NBTY Level 1 and 2 are from dimension and Spend Amount is a fact column. Both are joined in star schema. The results are correct.
So now i published the same report in a new dashboard, and created a new dashboard prompt on Dimension column "NBTY Level 1". I applied filter on the same column (Is Prompted) in report.But when i gave a value in Dashboard Prompt, the report is not changing. I cannot even find any trace of error displayed. When the prompt is selected and clicked on 'GO' button there is no moment in browser, it stays still. I have also permissions and everything is fine
Can some one please help in finding the problem, its an urgent issue, what possibly could go wrong?

Thank You for your reply.
Yes the prompt column is from same subject area.
I Created a Column Prompt in the report using the same column and it worked for that report. But when i used that prompt in dashboard its not applying.
I will share a logical query for Report but How should i fing logical query for a prompt?
The total behavior looks very strange.

Import from Final Cut Pro not working correctly

I have a very simple project in FCP. (Ver 6) It is a HD clip that is about 5 min long with 7 chapter markers.
I exported the project as an XML file and imported that into Premiere Pro empty project.
I wind up with two assets, a .mov with same name as the .mov in FCP and a sequence with the same named sequence in FCP.
Right clicking on the .mov and selecting "New sequence from clip" creates a new sequence with the .mov on the timeline.
There are no markers.
Right clicking on the sequence asset and selecting "New sequence from clip" creates another sequence with the same name and the .mov on the timeline.
The markers are inside the .mov and audio tracks, not up on the top ruler line where markers appear when manually adding markers.
The keystrokes to move to markers do not work.
The "Clear all Markers" function is greyed out , like it is when no markers exist.
If a "Dynamic link to Encore is performed, there is no markers in Encore.
If you enter chapter markers manually and look at the project file (an XML file) you will see indexes with the chapter points , durations and names as children named "Markers" with attribute"ObjectID='22'.under "//PremiereData"
Following , in sequential order, are subsequent objects "Markers", ObjectID='23" through "ObjectID=n
However, if you look at the project file after importing a FCP project, this same function occurs, except that it is "Markers" "ObjectID=30 with the indexes and marker data 31 through n (further down in the file). This area is empty when adding the markers manually in Premiere Pro.
FYI , the project file is littered with the word "Marker" and "Markers" throughout the file, only their attributes make any node unique.
I am at 99.9 &% finished with a VB program to create / modify nodes, values and attributes, except that the XML date changes format at the node named "//WorkspaceSettings" so I am not able to edit values to make a file that will not crash when opening.
I would very much like the import from Final Cut Pro to work, or someone explain how to work with the nodes under "//WorkspaceSettings"
Thank millions for a solution.

It's a 2007 iMac with 2.4 GHz Intel Core 2 Duo. I had been using Final Cut Pro without any problems right until I upgraded to Yosemite. I'm hoping that upgrading to Yosemite doesn't mean I can't continue using Final Cut Pro - that would be extremely frustrating.

EXPORT/IMPORT through FMs in BADI not working

Hi Experts,
I have checked several posts and implemented my requirement but it's not working. PFB my requirement:
We have a BADI in which I need to EXPORT an itab and the same is to be IMPORTed into ZFM. I have created 2 FMs under same FG. Now, in the FM which is being called in BADI i have EXPORT and in ZFM i have IMPORT. Code is given below:
FM from BADI: ZBADI_FM
IF lv_flag EQ 'X'.
EXPORT gt_msg TO MEMORY ID 'CHANGED_DATES'.
ENDIF.
Another ZFM under same FG: ZFM
IMPORT gt_msg FROM MEMORY ID 'CHANGED_DATES'.
gt_msg is declared in TOP that is common for both FMs. However, IMPORT is not happening. I am not getting the values that I exported. sy-subrc is 4.
Can anyone help me out? Your help is appreciated.

Hi,
I can't believe that it will work:
EXPORT TO MEMORY
A data cluster in the ABAP memory is available to all programs within a call sequence, whereby data can be handed over to called programs.
call sequence
This sequence is created if you can return from the called program to the calling program at the call of an ABAP-Program with SUBMIT ... AND RETURN or CALL TRANSACTION. For this purpose, the data of the internal session of the caller remains on a stack. The programs of a call sequence have collective access to the ABAP Memory. A call sequence can be left completely using the statement LEAVE TO TRANSACTION.
Regards,
Klaus

Premiere Markers export and import: Roundtrip via FCP XML not working

The objective of my project is to create a sports app that records markers and saves it in different formats of XML / CSV that I can then import in different NLE packages.
I have already succeeded with Vegas Pro but also want to support NLEs for MAC-OS.
In order to approach this analytically I have exported a very simple project with 1 sequence including 1 clip and 3 markers (with length zero and length > 0) and exported it
in FCP XML from Adobe Premiere CC and do a round-trip import it via FCP import into Adobe Premiere CC.
This round-trip does not work. Any insight why or any support what other mechanism will work?
Thanks
Thomas

let's go back to the purpose:
I have written a mobile app on which people can during a sports match capture the time of the important moments by pressing buttons.
I then convert the time information into an XML or CSV file that can be read by the different NLE. Given that Sony Vegas allows to import
markers independently from a sequence. Now I look at the same things for Premiere. This allows to edit the highlights very quickly vs watching
the entire match coverage again.
I try to replicate that on Premiere through the FCP XML, but now that the roundtrip works, the issue is that FCP XML in its structure wants a sequence.
I could imagine to provide a dummy sequence that can be overlayed by the real content just to preserve the markers. Any ideas?
Regards,
TK

Import - sort by "media type" not working?

When importing media from my iphone I'd like to ONLY import jpgs, not the mov files. In searching, the sort option in the import dialog on "media type" should work so I can easily just select new jpg files, however this does nothing for me. Is this supposed to work? I'm running OSX 10.7.2 and LR 3.6.
Any ideas? Does this sort function work for anyone?
Thanks!

Ok. Never mind what I said about selecting the sort order before selecting the folder.
I just checked again on my computer and (LR3) was able to sort by media type, by date, by name etc. from a folder on my desktop drives.
It even worked when importing from a media card. This is weird.
Although everything seems to work for me now however I do remember having encountered the same issue before.
There might be a bug. It would be nice to have someone from Adobe or LR to explain the limitations if any of this sort function.
Good Luck Marty.

Dictionary on my dashboard is not working. any suggestions?

dictionary on my dashboard on my desktop is not working. any suggestions?

Go to User Library Preferences and move ‘com.apple.dashboard.plist’ to the trash, then restart your iMac.

Import HTMLResources in Dashboard is not working

Similar Messages

Maybe you are looking for