Import ldif error with warning 5022 can't modify task entry

Hi Guys,
This is a new installation of ODSEE 11.1.1.7.0 (zip distribution) on a CentOS 5 server. When I put it on there I have to grab a few library by hand to get the commands going (glibc.i686, libstdc++.so.6, libz.so.1)
I created a instance and it started fine, but when I try to import the following ldif:
dn: c=AU
objectClass: top
objectClass: country
c: AU
aci: (targetattr="*")(version 3.0; acl "OpenIDM user access"; allow (add,write) userdn="ldap:///cn=openidm user,ou=technical users,c=AU";)
dn: ou=customers,c=AU
objectClass: organizationalUnit
objectClass: top
ou: customers
dn: ou=technical users,c=AU
objectClass: organizationalUnit
objectClass: top
ou: technical users
dn: cn=openidm user,ou=technical users,c=AU
objectClass: person
objectClass: organizationalPerson
objectClass: top
cn: openidm user
sn: user
userPassword: [password]
I got error:
- WARNING<5022> - Tasks - conn=-1 op=-1 msgId=-1 - Can't modify task entry 'cn=import1379317679873,cn=import,cn=tasks,cn=config'
- Import aborted: could not open LDIF file "example.ldif".
I am not sure this is a installation issue or a config issue.

Hi,
the error message seems to be related to the fact that the Directory Server instance is not able to 'open/access' the specified LDIF file.
Which exactly is the command you used to initialize the Directory Server instance?
Did you specified the full path of the LDIF file?
Has the LDIF file the right permissions to be read/accessed by the user with which the Directory Server runs?
HTH,
Marco

Similar Messages

Import Journal Completed with warning

Import Journal Completed with warning "no data found" but data exist in GL_INTERFACE against group_id
<< gllfss() 20-SEP-2010 10:02:23
gllcje() 20-SEP-2010 10:02:23
glluch() 20-SEP-2010 10:02:24<< glluch() 20-SEP-2010 10:02:24
LEZL0008: Found no interface records to process.
LEZL0009: Check SET_OF_BOOKS_ID, GROUP_ID, and USER_JE_SOURCE_NAME of interface records.
If no GROUP_ID is specified, then only data with no GROUP_ID will be retrieved. Note that most data
from the Oracle subledgers has a GROUP_ID, and will not be retrieved if no GROUP_ID is specified.
Pl suggest solution....

Journal Import can be classified as With specific group Id, All Group Ids and no Group Id.
Data from subledger will generally have group id. Try journal import run with selection criteria as "All Group ids". No group Id is used to import data without group id.
Regards,
Chirag

Aptv 3 dhcp error with Netflix, what can i do?

my aptv 3 don't work with Netflix movies, because show error DHCP message, what can i do?

It can be caused by:
1. Slow internet; minimum speed must be at least 1.5Mbps
2. Busy Netflix server
Test your Internet speed with this:
http://itunes.apple.com/sg/app/speedtest.net-mobile-speed/id300704847?mt=8&ls=1

ICal Wiki Groups - Can't Modify Calendar Entry - Error Bad Gateway

Hello All,
Recently found out how to add a wiki calendar to iCal however it seems rather buggy. I can add calendar entries just fine but when I go about modifying an entry it spits out:
The server responded with
“HTTP/1.1 502 Bad Gateway”
to operation CalDAVMoveEntityQueueableOperation.
Anyone else see this problem?

i have the same problem. i have my own snow leopard server running ical server. 5 users, (typical) shared calendaring. i personally have multiple calendars created. i see this error when i try to change the calendar of an invited event (from work to personal, for example).
any thoughts?

Importing flash files (with sound!) can it be done?

Hi!
I sucessfully importing a flash file but im not sure if the sound has imported with it, does anyone know if I can import a flash file with sounds or do I have to import the sound seperatly?
Helen

Helen,
After Effects can import .SWF files but unfortunately it does not recognize the audio in a .SWF file.
If it helps, AE can import .FLV files and it WILL recognize the audio in them.
Relevant Help page:
"Supported import formats"
-Troy

Can't log into itunes. It says there was an error with itunes. Can't even log in from my ipod touch

I am new to Apple. I recently got an Ipod touch and created an apple ID. while I can log into the manage account section, am unable to log into itunes on the computer or the ipod. I have windows 7. Am also not able to log into other apps such as facetime etc.
Please help!

Hi shrutsd,
After reading your post, it seems you are unable to access your Apple ID. Have you attempted to reset your password then try logging again?
Here are the steps for resetting your password:
Apple ID: Changing your password - Apple Support
Learn how to change your Apple ID password.
Follow these steps to change your Apple ID password. If you can't remember your password, follow the steps for what to do if you forget your Apple ID password.
Go to My Apple ID (appleid.apple.com).
Click “Manage your Apple ID” and sign in.
If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID. If you're unable to receive messages at your trusted device, follow the guidelines for what to do if you can't sign in with two-step verification.
Click "Password and Security".
In the "Choose a new password" section, click Change Password.
Enter your old password, then enter a new password and confirm the new password. Click Save when done.
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
If you forgot your Apple ID password - Apple Support
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

Error with iTunes 11- Can't delete lyrics

Hello,
I found a couple of posts on the same topic I'm about to ask but didn't find an answer anywhere. So I'm putting forth the issue again.
Error 1: For some songs, there are some lyrics which I want to delete. I do that through the info pane (cmd + i) and press ok. But when I check again, the lyrics re-appear.
Error 2: So I figured out the only way to get rid of the lyrics was to insert a space or dot in its place, as leaving it blank made the old lyrics reappear. It worked. But later when I sync this song to iPhone 5, the lyric remains what they were originally, no matter what I change on my mac. The same song shows separate lyrics on my mac (the one I recently changed) and shows the old original lyrics on my iPhone 5.
Is this some irreversible tweaking in tags done by the person who originally released the song or is it an error in itunes?
Please suggest a solution as I have googled a lot but nothing has helped so far.
Details: Mac OSX Mavericks / iTunes 11.2.2 / iPhone 5 / iOS 7.1.2

I faced the same problem and tried a lot of the solutions but none don't work and a blank space as told here is not a 100 % solution. I found a complete solution for it. It has got to do with the tagging of the songs. MP3 has two tags one is version 1 and version 2, iTunes seems to work well with Version 2 and when information is missing it updates it from the version 2 tag and the lyrics info is back even after deleting in iTunes.
Try this solution and it works like ****.. Download a MP3 tag editor and delete all the problematic info from both version 1 and version 2 tags preferably delta all version 1 tag data from the MP3 file and you are set. the best client I found for Mac running Mavericks is kid 3 found in source forge, the link is given below.
http://sourceforge.net/projects/kid3/
Then delete all the songs from iPod/iphone/ipad then re sync with iTunes on your mac.

Keychain error with .mac panel/can't turn on BTMM/etc.

I just installed 1password today and the 10.5.3 update all at once this afternoon on my desktop and laptop. Everything is cozy on my MP, but my MBP is going haywire.
When hitting .mac in the System Prefs pane, I get this error:
http://www.davidlehmanphoto.com/temp/keychainerror.jpg
Runs about 8 times or so, then I can access the panel, but it has already logged me out of .mac (I can log back in, but it just logs me right back out) and I can't turn on Back to my mac.
Any ideas?

*

Error with oil paint can you help

I'm using Photoshop CS6 on a PC. When I tried to apply the oil pain filter, I got an error message saying "The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check the manufacturer's website for the latest software." Could you let me know on how to fix this? Thank you!

I believe what this is saying is you need to update your video card driver as it is not up to the job. Go to makers website and download.
You might also get some relief if you change the advanced graphics card preferences to Basic. (edit/preferences/performance).
Hope this helps.

Importing SAPKB62043 error stop

Hi
I installed fresh 4.7R3-x200 system on WIN2003/MSSQL platform,next upgrated to 6.4kernel stack 58, tp and r3trans are updated to latest patch levels also SPAM is upgraded to 18.
Then started applying Basis Support Packs,at this point facing problems ,it was failing at SAPKB62043 in IMPORT PHASE XPRA_EXECUTION
Could someone help me out to solve the problem?
Thanks in advance to all
Here the import log files
The import was stopped, since an error occurred during the phase
XPRA_EXECUTION, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
     -   Error in phase: XPRA_EXECUTION
     -   Reason for error: TP_STEP_FAILURE
     -   Return code: 0012
     -   Error message: OCS Package SAPKB62043, tp step R, return code
         0012
   Log Overview for SAPKB62043
         SAPKB62043              Basis Support Package 43 for 6.20
           GEN        GENOVATE SAP
        Generate Transport Information File      (0) Successfully Completed
     Test Import                              (0) Successfully Completed
        Import Request Piece List                (4) Ended with Warning
        Import ABAP Dictionary Objects           (4) Ended with Warning
        ABAP Dictionary Activation               (4) Ended with Warning
        Import                                   (4) Ended with Warning
                      Method Execution           (12) Canceled
                      26.07.2005 14:10:00   (12) Canceled
                      26.07.2005 15:27:24   (12) Canceled
       Import steps not specific to transport request
Log file:                D:\usr\sap\trans\log\SAPRB62043.GEN
           Execution of programs after import (XPRA)
           Transport request___: SAPKB62043
           System______________: GEN
           tp path             : tp
           Version and Release: 340.16.03 640
           Post-import methods for change/transport request: SAPKB62043
              on the application server: GSAP
           Follow-up action AFTER_IMP_O2_TAGLIB for WTAG L started at 20050726140914
           Follow-up action AFTER_IMP_O2_TAGLIB for WTAG L ended at 20050726140915
           Follow-up action AFTER_IMP_SXSD for SXSD L started at 20050726140915
           Program terminated (job: RDDEXECL, no.: 14091001)
              See job log
           Execution of programs after import (XPRA)
           End date and time : 20050726141000
           Ended with return code: ===> 12 <===
===============
JOB LOG
===============
Date        Time      Message
26.07.2005 14:09:14 Job started
26.07.2005 14:09:14 Step 001 started (program RDDEXECL, variant , user ID DDIC)
26.07.2005 14:09:14 All DB buffers of application server GSAP were synchronized
26.07.2005 14:09:19 ABAP/4 processor: LOAD_TYPEPOOL_VERSION_MISMATCH
26.07.2005 14:09:19 Job cancelled

Hi,
Can you please check the Package again.
It seems very new Pacakage. If the package is new you have to wait till BW SP13.
If not please download again from the Service market Place and try.
Refer the note 844007. If it is a test server go for manual correction using the note.
regards
Anand.M

"WF-USER can only delete this entry" error while deleting entry in tRFC

Hello Experts,
We have a scenario wherein the outbound IDoc from our SAP system consists of lot of IDoc data segments. Becase if this large size, the EAI Middleware is getting out of memory exception while processing it before sending it to the receiving system with an error "Trnasaction XXXXXXXXX rolled back" (Committing is geting failed). And it is not possible from EAI Middleware side to increase the memory. Because of this, other outbound IDocs getting struck in the tRFC (IDoc status = 03, Data Passed to Port OK) queue and thereby delaying the process.
We would like to delete the entry (TID) of this particular IDoc from the tRFC queue. When we try to do taht, we are getting the error message "WF-BATCH can only delete this entry" which is actually the system Workflow user.
Could anyone suggest me the way to delete the entries? We hav one option where we can that system user name to our user name in "Debug Change'. Becasue of some authorozation problems, we would not be getting that.
Could you please suggest me about any alternative. Appriciate your help. Thanks in advance.
Best regards,
Kishore.

Hello Kishore,
I also encountered the same problem in transaction SWU2.
I could bypass the message in debuging mode only.
I put a breakpoint in report RSARFCRD, and, in debug mode, I skip the following check:
      if sy-lisel+1(12) <> sy-uname.
        message e019 with sy-lisel+1(12).
      endif.
Best Regards,
Alexandre.

Can not use overlapping entries?

I am using a WRT110. I use MAC address filtering and when I initially setup the list I had no problems. Now I am trying to add another MAC address to the list and when I click on save, I get an error window stating "You can not use overlapping entries." Other than that everything is working fine. Anyone have any ideas?

Hey make sure you are using the same MAC address its very important it should be in the same format & make sure you are connected properly through the router also do a complete network power cycle!!!

I can't import HD video from Samsung OIS Duo into FCP. However, I can see the video with QT. In FCP, I just see a red bad with a yellow triangle (warning). Can someone help me. The video are Full HD 1080/60i?

I can't import my HD videos (MP4) from my Samsung OIS Duo into FCP.
However, I can see the video with QuickTime.
In FCP, I just see a red box with a yellow triangle at the center(warning). Can someone help me. The video are Full HD 1080/60i.
I also try converting from MP4 to DV. Cannot import the .DV either.
Can someone help me?

Could it be the case that you have "proxy media" selected in the preferences (under Final Cut Pro -> Preferences, click on "Playback" and see which is selected, proxy or optimized), BUT you are not creating proxy media when importing?
If that is the case, either
- switch to "original/optimized media",
or
- create the proxy media (control-click the clip(s) in the event browser, choose "Transcode media" e check the box for "create proxy media").

My safari wont open error reads "safari quit unexpecatly" with a yellow warning sign, can i delete safari and reinstall after, my safari wont open error reads "safari quit unexpecatly" with a yellow warning sign, can i delete safari and reinstall after

can any one help with this matter.. my safari wont open getting a warning message every time saying "safari had to close unexpecatly" i can still get on the internet via Opera fomr the app store, also my computer is saying that mountain loin wont work i have enough storage and ram on my air to run mountain lion

Hi robsterc,
Now, is it just me or does EVERY SINGLE update to OS X cause a problem with Sarafi - I can remember Safari having issues with at least the last 3 updates.
Usually this happens when you have 3rd party extensions installed that are not compatible with the latest versions of Safari.
Can you post the crash report text here and hopefully that will give us a clue where the root of the problem is. You can obtain the crash report text by clicking the (Report...) button in the Unexpectedly Quit window and then copying and pasting the text here.

LDIF Importing a user with a non-encrypted password fails, anywork arounds?

I was able to import a group without issue:
dn: cn=Authenticated,cn=Groups,dc=oraclelinux,dc=com
description: test group
objectClass: top
objectClass: groupOfUniqueNames
uniqueMember: cn=orcladmin,cn=People,dc=oraclelinux,dc=com
cn: Authenticated
But when I try to import a standard user:
dn: cn=testuser2,cn=Users, dc=oraclelinux, dc=com
userpassword:: password1
description: test user
objectClass: top
objectClass: person
sn: testuser2
cn: testuser2
It fails if I remove the password field then I can import the user without issue, but I need to include the password field as it is part of what was exported from the old LDAP Server.
If I create a user in an ldif import it then add a password using oracle's Directory Manager upon exporting it the entry loks like:
dn: cn=testuser, cn=Users, dc=oraclelinux, dc=com
authpassword;orclcommonpwd: {MD5}fGoYCzaJagqMAnh+6vsOTA==
authpassword;orclcommonpwd: {X- ORCLLMV}E52CAC67419A9A2238F10713B629B565
authpassword;orclcommonpwd: {X- ORCLNTV}5835048CE94AD0564E29A924A03510EF
authpassword;oid: {SASL/MD5}tUquh+Duowh2aWSEwONtcQ==
authpassword;oid: {SASL/MD5-DN}lcQ7Z5O5vcwzXMeaZ65fYw==
authpassword;oid: {SASL/MD5-U}AAWzkmDDCJLbs9mxoWBTiw==
userpassword:: e1NIQX00NHJTRkpROXF0SFdUQkF2cnNLZDVLL3AyajA9
description: test user
objectclass: top
objectclass: person
sn: testuser
cn: testuser
Changing my imported ldif to look like the following WORKS:
dn: cn=testuser2,cn=Users, dc=oraclelinux, dc=com
userpassword:: e1NIQX00NHJTRkpROXF0SFdUQkF2cnNLZDVLL3AyajA9
description: test user
objectClass: top
objectClass: person
sn: testuser2
cn: testuser2
So the password must be encrypted then?, if so how to I generate a password hash on the command-line and through JAVA?
Can an import be forced with a plain text password (Tivoli, SUN both support this functionality).
Can I change the constraint that the password must contain a numeric char? (Found in document: http://download-uk.oracle.com/docs/cd/B28196_01/idmanage.1014/b15991/pwdpolicies.htm#g1051713)
After fixing the constaints I can import a non-encrypted password from an ldif, but it can not be verified and only the authpassword;oid entries are created not the authpassword;orclcommonpwd entries.
Thanks for your assistance,
ERIC GANDT

Eric, my first guess would be that the OID password policy prevents loading of the password i.e. the password doesn't match the existing password policy.
What version is your "old" OID and what is the version of the current OID you're using?
What is the error msg you get?
regards,
--Olaf

Import ldif error with warning 5022 can't modify task entry

Similar Messages

Maybe you are looking for