Import MS Access 2010 (*.accdb) to SQL Server Express 2014
Hi,
I have a SQL Server Express 2014 installed in my laptop and when I trying to import MS Access 2010 (.accdb) database using .net framework ODBC it still looking for a driver. Please help. Thanks!!
Hi,
You can use SQL Server Migration Assistant (SSMA) to migrate Access databases to SQL Server.
Migrating Access Databases to SQL Server/SQL Azure (AccessToSQL)
http://technet.microsoft.com/en-us/library/hh313051.aspx
Also, refer to the below thread:
Issues in Importing Access Database into SQL Server 2014 Express
http://social.technet.microsoft.com/Forums/en-US/3a40eda6-b609-4855-96e5-f5765acf5059/issues-in-importing-access-database-into-sql-server-2014-express
Hope it helps
Tracy Cai
TechNet Community Support
Similar Messages
-
What is the correct wording to connect to an SQL Server Express 2014 database?
I am connecting to an Access 2007 database:
oleConnection = new OleDbConnection("Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\\...\\Db.accdb");
What is the correct wording to connect to an SQL Server Express 2014 database?
bhs67Hello,
Please make sure you change RemoteServer with the computer name of the intended SQL Server server.
Make sure the SQL Server instance have enable TCP/IP and Named Pipes protocols. Use the following article to enable them:
http://msdn.microsoft.com/en-us/library/ms191294.aspx
Start SQL Server Browser Service using SQL Server Configuration Manager.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
SQL Server Express 2014 CTP2 LocalDB
I just installed 2014 SQL Express and everything looked like it worked just fine.
Too fine for my own good because it updated the database files to version 782 and now I am stuck.
I cannot get SQL Server Management Studio nor VS 2013 Express to connect to LocalDB v12.0, only to LocalDB v11.0, but the latter does not read version 782 data base files.
The Discovery Report shows that LocalDB v.12 has been configured. But when I try to connect with "(LocalDB)\v12.0" I get "Cannot connect..." It can still connect with "(LocalDB)\v11.0" but than cannot open the v.782
data bases.
And when I try to open an SQLexpress database in VS 2013 Express it comes back with "An incompatible SQL Server version was detected."Hello ,
Do you know these links ?
http://msdn.microsoft.com/en-us/library/hh510202(v=sql.120).aspx
http://social.technet.microsoft.com/wiki/contents/articles/4609.troubleshoot-sql-server-2012-express-localdb.aspx
You may have problems with access permissions on the files of the database ( see at the end of the 2nd link ). The user must be added to the list of authorized users to connect and so on.
There was also a similar problem of connection for applications created with VS 2010 towards localdb 2012.
See also the articles from the SQL Server Express Weblog ( for 2012 but the remarks could be always interesting )
http://blogs.msdn.com/b/sqlexpress/archive/2011/11/28/using-localdb-in-visual-studio-2010.aspx
http://blogs.msdn.com/b/sqlexpress/archive/2011/10/28/localdb-where-is-my-database.aspx
http://blogs.msdn.com/b/sqlexpress/archive/2011/10/27/net-framework-4-now-supports-localdb.aspx
Please , could you explain how you have created your localdb on the users computers ?
I am surprised by your short error message ( I think that you have not provided the full error message ).
Have a nice day
PS : as you are using a SQL Server Express 2014 CTP2 , it is possible that the RTM version could solve your problem. I have applied always a rule : I never install an application using a new version of SQL Server before the release of the SP1.
Mark Post as helpful if it provides any help.Otherwise,leave it as it is. -
How to install and use sql server express 2014 with tools
I am a student and have an assignment that requires I use either mysql or sql server, so I chose to download and install sql server express 2014 with tools, but after installation was complete all I can see is sql server 2014 import and export data (64-bit)
and I have no clue what to do wiith it...I had used sql server 2008 a couple of years ago and it was easy, but this is very complicated, I have been trying to get this done for 2 days now, so someone please help me and tell me what I am doing wrong.Hi,
It seems you did not installed complete software. Make sure you have downloaded below from
SQL Server Express Download link
Express with Advanced Services (SQLEXPRADV) when you click on Get started button on page displayed by clicking on above link. This download includes Sql Server Management Studio as well.
Before moving I would Like you to first read
Hardware and Software requirements
Please refer
how to install SQL server 2014 express
Above Link is for Enterprise edition but you can use it for express as well. When you reach page feature selection please select all features to install.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
VFPOLEDB and MS SQL Server Express 2014
I can install VFPOLEDBSetup.msi on machine with Windows 7 - 64bit and MS SQL Server Express 2012, but I cannot install VFPOLEDB on machine with Windows 7 - 64bit and MS SQL Server Express 2014. Is there a problem with MSSQL 2014?
I don't think this is related to what Man-wai Chang points to, because the dropping of OLEDB just means continued development of data access drivers for SQL Server are ODBC only now, not that the OLEDB branch of any database is broken intentional.
That said, it's quite cumbersome to find out what your detail problem is. Do you expect installation of Win7, MSSQL2014 and VFPOLEDB to eventually reproduce and see your problem? You could bet on your luck someone else had the same combination, but there
are not a lot of VFP developers left over and they may already be using Win8 or 8.1
Is there any error in setup? Are you just looking at the wrong place (eg OLEDB providers are not lilsted in ODBCAdmin)? VFP OLEDB is and always will be a 32bit driver and can only be seen and used from 32bit processes.
Bye, Olaf.
PS: You can use 32bit drivers from a 64bit MSSQL Server as it manages pools of 32bit and 64bit processes. For example see how to do via linked server http://fox.wikis.com/wc.dll?Wiki~VisualFoxProDataFromSQLServer. The detail is in allowing inprocess
usage of the driver.
Also see this:
Create a new SQL Server Integration Services(SSIS) package.
Add a Data Flow Task(DFT) to the package.
Select the DFT, and go to Data Flow designer page.
Add a OLE DB Source to the package.
Double-click the OLE DB Source, click “New” > “New” to create a connection to Visual FoxPro.
In the Connection Manager, please select “Microsoft OLE DB Provider for Visual FoxPro”
Type the file path of a Visual FoxPro database(e.g. C:Address.dbc).
Test the connection by clicking button “Test Connection”
Click “OK” > “OK” to apply.
Now, we can select a table from the Visual FoxPro database in the OLE DB Source editor.
(quoted from http://blogs.lessthandot.com/index.php/datamgmt/datadesign/think-carefully-which-sql-server-you-wan/)
Olaf Doschke - TMN Systemberatung GmbH
http://www.tmn-systemberatung.de -
SQL Server Express 2014 and SQL Server Agent
Any chance SQL Server Express 2014 supports SQL Server Agent. I have a home weather database and I have to import Data every 30 seconds.
Any chance SQL Server Express 2014 supports SQL Server Agent. I have a home weather database and I have to import Data every 30 seconds.
SQL server 2014 express does not have SQL Server agent.You can take help from creating batch files and running them thorugh CMD.windows scheduler will let you schedule it.
How to schedule and automate backup in SQL Express
Free job scheduling toll for SQL Express
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
SQL Server Express 2014 Installation Completes with Failures and Repair Does Nothing to Help
I am attempting to install SQL Server Express 2014 on a development machine and as usual old versions of SQL and the remnants of them are a plague to the installation.
I have used to Revo Uninstaller to scrub the old installations and with my first attempt after some additional work on the registry I was able to get an instance to install and remarkably I was able to connect to the instance. However, I removed an application
reference to SQL Server 2008 after the SQL Express 2014 installation (through Control Panel > Programs > Programs and Features) and it stopped working immediately.
So I removed (uninstalled using Revo Uninstaller) every reference to any SQL Server application as well as removed all of the registry references (using Revo) and I can now install SQL Server Express 2014 with
"Feature" failures [Reporting Services, Database Engine Services, Full-Text and Semantic Extractions for Search and SQL
Server Replication] and of course it doesn't work.
Now when I attempt "Repair" the installation the process ends normally (no errors) and reports "Success" however SQL still has no instance and the services are not running nor are they visible when I open the "SQL Server Configuration
Manager".
This is the "Repair" log:
Overall summary:
Final result: Passed
Exit code (Decimal): 0
Start time: 2014-12-21 17:21:37
End time: 2014-12-21 17:29:10
Requested action: Repair
Machine Properties:
Machine name: EDWARD-PC2
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered Configured
SQL Server 2014 Management Tools - Basic 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 Management Tools - Complete 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 Client Tools Connectivity 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 Client Tools Backwards Compatibility 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 Client Tools SDK 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 LocalDB 1033 Express Edition 12.0.2000.8 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Edward\Downloads\SQLEXPRADV_x86_ENU\x86\setup\
Installation edition:
User Input Settings:
ACTION: Repair
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASCONFIGDIR: Config
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
ENU: true
FAILOVERCLUSTERGROUP: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
QUIET: false
QUIETSIMPLE: false
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
UIMODE: AutoAdvance
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141221_172135\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141221_172135\SystemConfigurationCheck_Report.htm
However this is what the "SQL Sever Configuration Manager" look like:
Why does this appear to not be working properly? I can not connect the the "local" instance and I would guess that the service either does not exist or is not running.
Edward WalkerHello,
To my knowledge, Revo is not a supported way to uninstall SQL Server.
Please try to uninstall all you can using Control Panel -> Programs and Features, then perform a manual uninstall to
remove remnants. Try the following procedure:
1. Uninstall all SQL Server 2012 components you can using Control Panel -> Programs and Features
2. Backup the registry.
3. Delete the following keys in regedit:
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing
SQL Server.
5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
6. Rename all the SQL Server folders in the computer like C:\Program Files\Microsoft SQL Server and subfolders.
After performing above procedure, try to reinstall SQL Server again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Install SQL Server Express 2014 on same machine as SQL Server Express 2008 R2
Hello, I have a customer with a CRM application using SQL Server 2008 Express (installed as part of the product installation).
They wish to use another database-based application and the CRM company is recommending a separate instance of SQL for the other database.
So, I am wondering if it is possible to install SQL Server Express 2014 on the same machine as the existing SQL Server Express 2008 R2?
Many thanks for any assistance provided.The CRM application in question is SAGE Act!. It is their own (proprietary) application.
I am less interested in comparability questions concerning this application than I am about the possibility of installing
SQL Server Express 2014 or creating another database instance within the existing SQL Server Express 2008. -
Write a connectionstring for a SQL Server Express 2014 version
How do you write a connectionstring for a SQL Server Express 2014 version?
http://msdn.microsoft.com/en-us/evalcenter/dn434042.aspxHi,
Which application you are using to connect to SQL Server ?
Below links have different examples
http://msdn.microsoft.com/en-us/library/ms228094%28v=vs.85%29.aspx
http://msdn.microsoft.com/en-us/library/jj653752%28v=vs.110%29.aspx
https://www.connectionstrings.com/sql-server-2012/
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
SQL Server Express 2014 sample database
Can someone provide a link to a sample database that is known to work with SQL Server Express 2014. AdventureWorks gave an error that a partition feature was not supported in Express when I tried a 2014 download. Thanks in advance
Hello,
Partitioning is an enterprise edition feature. Could you try to use SQL Server 2014 Evaluation Edition instead?
http://www.microsoft.com/en-us/evalcenter/evaluate-sql-server-2014
(180 days evaluation period)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Import MS Access 2013 tables into SQL Server 2012
Hi there,
Is there a step by step example somewhere showing how to import an MS Access 2013 table into SQL Server 2012?
I have read the existing posts and don't see a definitive answer.
I have installed MS Access 2010 engine, first 32 bit then 64 bit.
I have installed the MS Access 2013 runtime on my server.
I use the Office 2015 Access Database Engine OLE DB Provider.
I get the error:
Error 0xc0202009: Source - APEntries [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.
Error 0xc02020e8: Source - APEntries [1]: Opening a rowset for "`TableName`" failed. Check that the object exists in the database.
The post regarding the above errors doesn't resolve the issue.
I have full administrative permissions on the server.
What is the trick to making this work?
Thanks,
Ric
Ric MillerHi there,
I tried the exact same operation on a third machine.
This machine has Windows 8.1 64 bit, SQL Server 2012 64 bit, MS Office 2013 Plus 32 bit.
I am the administrator on this machine.
I installed this:
Microsoft Access Database Engine 2010 Redistributable 32 bit (because I have MS Office 2013 plus 32 bit installed.)
From here:
http://www.microsoft.com/en-us/download/details.aspx?id=13255
It won't let me install the 64 bit version without uninstalling MS Office 32 bit.
I created an MS Access database on this machine using MS Access 2013 and created a table with 3 records.
I used the "Import and Export Data (32 bit)" from the start menu.
After I installed the "Database Engine 2010 32 bit" driver above, I now have the option of "Office 2015 Access Database Engine OLE DB Provider" as Data Source which I did not have prior to doing this installation.
I selected the driver and added the Properties of the Data Source Name file location of the MS Access file. I am using a blank password.
I go thru the same sequence of selecting a table to import and after running the result is the same:
Error 0xc0202009: Source - APEntries [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.
"Error 0xc02020e8: Source - APEntries [1]: Opening a rowset for "`TableName`" failed. Check that the object exists in the database."
This seems to be consistent across three machines with three operating systems with the same files and the same result.
I understand that some people have gotten this to work.
I would appreciate it if anyone can report an error in the above procedure to me.
Thanks,
Ric
Ric Miller -
Upgrade from SQL Server 2005 to SQL Server Express 2014 Enterprise
I was just wondering if it is possible to upgrade from SQL Server 2005 to SQL Server Express or will I have to build the environment and then migrate the database?
Thanks for any helpHi Lance_Romance,
As others’ posts, you don’t have to build new environment and then migrate databases between SQL Server instances, you can use the in-place upgrade strategy to upgrade from SQL Server 2005 to SQL Server 2014 .Please note that SQL Server 2005 SP4 is required
in this case.
Before upgrading , I recommend you to use
upgrade advisor, it can help to analyze your existing SQL Server deployment and inform you of issues that need to be addressed. In addition, please perform a full server backup prior to performing the in-place upgrade, which will be an important way
to revert your SQL Server to its previous state if the upgrade does not go as planned. For more details, please review this blog:
Upgrading to SQL Server 2014: A Dozen Things to Check.
Thanks,
Lydia Zhang -
SQL Server Express 2014 on Win8.1: Could not find the Database Engine startup handle
Hello,
I tried to follow all the similarly titled posts in this forum, yet no solution seems to work, so I hope I can find some up-to-date suggestion here (most of the older posts refer to versions from 2008 to 2012...).
I have installed Visual Studio 2013 (with the latest Update 2 RC) on a freshly installed development workstation with Win 8.1 with all its updates. Now I'd want to install SQL Server 2014 Express, but the setup keeps failing with the dreaded "Could
not find the Database Engine startup handle" error (the log follows below).
What I tried:
1) download again and repair. Same error.
2) completely uninstall by launching setup.exe /Action=uninstall (success), then rebooting the OS, then installing again. Same error. I did this twice, the second time I also manually removed any directory left out in C:\Program Files etc.
When I launch the setup, I select all the components for installation in the package SQLEXPRADV_x64_ENU.exe (1.12 GB, last downloaded today -Apr 3, 2014-), and accept all the defaults including the proposed services accounts. There is no preexisting
SQL Server instance, as expected.
The setup takes its time, and finally fails with the error quoted above. I really do not want to reformat my HD and fully reconfigure my workstation, which took about 3 days... Could anyone suggest a solution to have SQL Server 2014 setup so I can start
developing instead of wasting time in administering the system?
Thanks to all! The log follows.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2014-04-03 18:30:58
End time: 2014-04-03 19:04:41
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: DIOMEDES
Machine processor count: 4
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Daniele\Downloads\SQLEXPRADV_x64_ENU\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, CONN, BC, SDK, BOL, SSMS, ADV_SSMS, LOCALDB
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: DIOMEDES\Daniele
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_183057\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_183057\SystemConfigurationCheck_Report.htmThank you, it worked! I suppose that it was really your nr.3 which made the difference. I changed NT Service\MSSQL$SQLEXPRESS to NT AUTHORITY\System for the Data service. I'll then change it again as suggested (any suggestion about a "standard"
account to be used here?), even if this is a development workstation using SQL Server Express only as a local database for debugging, so security is not really a big concern.
Thanks for the feedback.Ya I know No3 was real step but just added more info so as to rule out any other possibility.
No not as such, you wont believe,quite few pf my clients I have worked for keep it with local system and they have not complained yet ,they are afraid to change account as few of them faced issue SQL Server not coming online due to logon failure( after changing
startup account to some domain a and that was happening due to some AD policy.But if you have nay plans to move Critical database in production which would be act as Database to some Internet facing application please follow my suggestion
of running SQL Server with Least privileged domain account.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Overlapped I/O error installing SQL Server Express 2014 on Win 8.1
Hi,
I'm attempting to install SQL2014 on a SurfacePro3 running Win 8.1. Despite much searching I've not found anything that gets me past this problem.
I've tried:
Uninstalling a update KB2918614 which was highlighted as a potential issue
The login is the only account on the machine (not networked)
Used "Run as Administrator"
Even tried setting up a new User Account not linked to MS
Run from the SETUP.EXE in the extracted files (with "Run As Admin")
The Summary log is below:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068053019
Start time: 2014-12-03 10:40:32
End time: 2014-12-03 10:59:53
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for Conn: Use the following information to resolve the error, and then try the setup process again.
Next step for SDK: Use the following information to resolve the error, and then try the setup process again.
Next step for BC: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for Browser: Use the following information to resolve the error, and then try the setup process again.
Next step for ComponentUpdate: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: JASONSURFACE
Machine processor count: 4
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United Kingdom)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Temp\SQL2014\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, CONN, BC, SDK, SSMS, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: C:\MSSQL
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS2014
INSTANCENAME: SQLEXPRESS2014
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: C:\MSSQL\BackUp
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS2014
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: JASONSURFACE\Jason, JasonSurface\Administrator, BUILTIN\Administrators, Jason, NT AUTHORITY\Local account, NT AUTHORITY\LOCAL SERVICE, NT AUTHORITY\NETWORK SERVICE, NT AUTHORITY\SERVICE, NT AUTHORITY\SYSTEM
SQLTEMPDBDIR: C:\MSSQL\Temp
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: C:\MSSQL\Data
SQLUSERDBLOGDIR: C:\MSSQL\Logs
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141203_104031\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio 2010 Redistributables
Component error code: 997
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141203_104031\VC10Redist_Cpu64_1.log
Error description: Error 997.Overlapped I/O operation is in progress.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=vc_red.msi%40ProcessComponents%40997
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio 2010 Redistributables
Component error code: 997
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141203_104031\VC10Redist_Cpu64_1.log
Error description: Error 997.Overlapped I/O operation is in progress.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=vc_red.msi%40ProcessComponents%40997
Feature: Client Tools SDK
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio 2010 Redistributables
Component error code: 997
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141203_104031\VC10Redist_Cpu64_1.log
Error description: Error 997.Overlapped I/O operation is in progress.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=vc_red.msi%40ProcessComponents%40997
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio 2010 Redistributables
Component error code: 997
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141203_104031\VC10Redist_Cpu64_1.log
Error description: Error 997.Overlapped I/O operation is in progress.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=vc_red.msi%40ProcessComponents%40997
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio 2010 Redistributables
Component error code: 997
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141203_104031\VC10Redist_Cpu64_1.log
Error description: Error 997.Overlapped I/O operation is in progress.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=vc_red.msi%40ProcessComponents%40997
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio 2010 Redistributables
Component error code: 997
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141203_104031\VC10Redist_Cpu64_1.log
Error description: Error 997.Overlapped I/O operation is in progress.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=vc_red.msi%40ProcessComponents%40997
Feature: SQL Browser
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio 2010 Redistributables
Component error code: 997
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141203_104031\VC10Redist_Cpu64_1.log
Error description: Error 997.Overlapped I/O operation is in progress.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=vc_red.msi%40ProcessComponents%40997
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Feature: Setup Support Files
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio 2010 Redistributables
Component error code: 997
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141203_104031\VC10Redist_Cpu64_1.log
Error description: Error 997.Overlapped I/O operation is in progress.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=vc_red.msi%40ProcessComponents%40997
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141203_104031\SystemConfigurationCheck_Report.htmSorry for late reply. The VC++ download did not install as it 'requires X64' -looking at the top of the log it states that the OS is 'future X64'
OS Version = 6.2.9200, Platform 2
OS Description = Future OS - x64
OS Version Information
Environment details:
CommandLine = c:\ccbfb742b64e9fa3860db0da73\Setup.exe
TimeZone = GMT Standard Time
Initial LCID = 2057
Environment details
SetupResources.dll missing from 2057 directory
Entering Function: LocalizedData::CreateLocalizedData
succeeded
Entering Function: EngineData::CreateEngineData
Using Simultaneous Download and Install mechanism
succeeded
MaintenanceMode determination: evaluating
EnterMaintenanceModeIf
Exists: evaluating
Exists evaluated to false
MaintenanceMode determination evaluates to 'not in maintenance mode'
Operation Type:
Operation: Installing
Operation Type
Package details: Microsoft Visual C++
2010 x64 Redistributable Setup
Package Name = Microsoft Visual C++ 2010 x64 Redistributable Setup
Package Version = 10.0.40219
Package details
User Experience Data Collection Policy:
User Experience Data Collection Policy: UserControlled
User Experience Data Collection Policy
Entering Function: UiDataT<class
ccmdlineswitches="">::CreateUiDataT</class>
succeeded
Global Block Checks: Checking for global
blockers
BlockIf: Microsoft Visual C++
2010 Redistributable is not supported on this operating system.
And: evaluating
Equals: evaluating
Equals evaluated to true
GreaterThan: evaluating
GreaterThan evaluated to false
And evaluated to false
BlockIf evaluated to false
BlockIf: This setup program requires
an x64 platform. It cannot be installed on this platform.
And: evaluating
Equals: evaluating
Equals evaluated to true
Not: evaluating
Equals: evaluating
Equals evaluated to true
Not evaluated to false
And evaluated to false
BlockIf evaluated to false
BlockIf: A newer version of Microsoft
Visual C++ 2010 Redistributable has been detected on the machine.
And: evaluating
Equals: evaluating
Equals evaluated to true
LessThan: evaluating
LessThan evaluated to false
And evaluated to false
BlockIf evaluated to false
Global Block Checks no blocking conditions found
Applicability for Installing: evaluating
each item
Determining state: of c:\ccbfb742b64e9fa3860db0da73\vc_red.cab
Exists: evaluating
Exists evaluated to false
Determining state of c:\ccbfb742b64e9fa3860db0da73\vc_red.cab - available but not verified yet
Determining state: of c:\ccbfb742b64e9fa3860db0da73\vc_red.msi
Exists: evaluating
Exists evaluated to false
Determining state of c:\ccbfb742b64e9fa3860db0da73\vc_red.msi - available but not verified yet
Determining state: of c:\ccbfb742b64e9fa3860db0da73\vc_red.msi
Exists: evaluating
Exists evaluated to false
Determining state of c:\ccbfb742b64e9fa3860db0da73\vc_red.msi - authored action for this item is NoOp
Determining state: of MSIServer
Determining state of MSIServer - payload not required for this item to perform action.
Exists: evaluating
Exists evaluated to false
Exists: evaluating
Exists evaluated to false
Applicability for Installing determination is complete
Applicability Result Count:
Number of applicable items: 3
Applicability Result Count
Action: System Requirement Checks
Action: Disk space check for items
being downloaded
Action complete
Action: Enumerating incompatible processes
Action complete
Action: Enumerating incompatible services
Action complete
Action complete
Action: Downloading and/or Verifying
Items
c:\ccbfb742b64e9fa3860db0da73\vc_red.cab:
Verifying signature for vc_red.cab
c:\ccbfb742b64e9fa3860db0da73\vc_red.cab Signature verified successfully for vc_red.cab
c:\ccbfb742b64e9fa3860db0da73\vc_red.msi:
Verifying signature for vc_red.msi
c:\ccbfb742b64e9fa3860db0da73\vc_red.msi Signature verified successfully for vc_red.msi
Action complete
Exists: evaluating
Exists evaluated to false
Exists: evaluating
Exists evaluated to false
Action: Performing actions on all Items
Action: Performing Action on MSI at
c:\ccbfb742b64e9fa3860db0da73\vc_red.msi
Returning IDOK. INSTALLMESSAGE_ERROR [Error 997.Overlapped I/O operation is in progress. ]
MSI (c:\ccbfb742b64e9fa3860db0da73\vc_red.msi) Installation failed. Msi Log: Microsoft
Visual C++ 2010 x64 Redistributable Setup_20141219_081422871-MSI_vc_red.msi.txt
PerformOperation returned 1603 (translates to HRESULT = 0x80070643)
Action complete
OnFailureBehavior for this item is to Rollback.
Action: Performing actions on all Items
Action complete
Action complete
Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation. " (Elapsed time: 0 00:00:05). -
Unable to install sql server express 2014 in windows 8.1 pro
The program terminates with:
"Unable to retrieve data for this operation"
the logs all end with:
Attempting to launch process C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\SQLServer2014\setup.exe
the bootstrap log references exception:
"Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction" threw an exception during execution.
(01) 2015-04-02 08:45:15 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: Failed to retrieve data for this request. ---> Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. --->
Microsoft.SqlServer.Configuration.Sco.ScoException: Attempted to perform an unauthorized operation. ---> System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
(01) 2015-04-02 08:45:15 Slp: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess)
Can you help?Just in case, here is a log when running as administrator:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2146233088
Exit facility code: 19
Exit error code: 5376
Exit message: Failed to retrieve data for this request.
Start time: 2015-04-03 12:17:20
End time: 2015-04-03 12:17:37
Requested action: Install
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x48BB60BC%400xBB814387&EvtType=0x48BB60BC%400xBB814387
Machine Properties:
Machine name: DGF-PAVILION
Machine processor count: 4
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\0\SQLServer Developer\x64\setup\
Installation edition: Evaluation
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES:
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE:
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150403_121719\ConfigurationFile.ini
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
Message:
Failed to retrieve data for this request.
HResult : 0x80131500
Data:
HelpLink.ProdName = Microsoft SQL Server
HelpLink.BaseHelpUrl =
http://go.microsoft.com/fwlink
HelpLink.LinkId = 20476
HelpLink.EvtType =
0x48BB60BC@0xBB814387
DisableWatson = true
Stack:
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.<>c__DisplayClasse.<ExecuteActionWithRetryHelper>b__b()
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(ActionWorker workerDelegate)
Inner exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
Message:
Attempted to perform an unauthorized operation.
HResult : 0x84bb0001
FacilityCode : 1211 (4bb)
ErrorCode : 1 (0001)
Data:
WatsonData =
HKEY_LOCAL_MACHINE@SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL12.TRAJECTORY2014\Setup
Stack:
at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess)
at Microsoft.SqlServer.Configuration.Sco.SqlRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetInstanceMapObject(String machineName, RegistryView registryView, String instanceId, String instanceName, String
instanceType, String instanceSuffix, UpgradedInstanceStateEnum instanceState)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetInstanceMapCollectionInHive(String machineName, RegistryView regView, List`1 subKeys)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetInstanceMapCollection()
at Microsoft.SqlServer.Discovery.Instance.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
Inner exception type: System.UnauthorizedAccessException
Message:
Attempted to perform an unauthorized operation.
HResult : 0x80070005
Stack:
at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess)
Maybe you are looking for
-
How do I transfer music from one ipod to another?
Hello, I need help transferring music from one ipod to another? I got a new laptop and now my itunes library does not contain a lot of my music!
-
Mac pro 2006 hd 2600 xt should work in bottom slot?
I was using a 3rd party hd 4870 in the bottom and was working fine. Now I was thinking of selling the machine but when I put the older hd 2600 in the slot there is nothing. All of the other slots work fine, I have yet to see if the 4870 will work if
-
Read/write external file from remote location
hi all, due to more concern about storage, we are storing some pdf/doc/jpg files in remote location, we need to write/read that files without storing in the database, the files would be external file. is there any procedure to do so, thanks in advanc
-
Ipod set to manual, video options grayed out, no copying
First, I was experimenting, which is why I am having the following issue. My ipod 30gig Video was formatted on Windows XP when purchased. I decided I wanted the new update, but to do that I had to get rid of everything and use the iPod CD to convert
-
I have an IPAD 2 and I downloaded some podcasts and when i try to watch then i see that I have to accept the terms and conditions and takes me to a link where I can´t find where to accept or to click "I agree" so I can watch what I downloaded.