What is the correct wording to connect to an SQL Server Express 2014 database?

I am connecting to an Access 2007 database:
oleConnection = new OleDbConnection("Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\\...\\Db.accdb");
What is the correct wording to connect to an SQL Server Express 2014 database?
bhs67

Hello,
Please make sure you change RemoteServer with the computer name of the intended SQL Server server.
Make sure the SQL Server instance have enable TCP/IP and Named Pipes protocols. Use the following article to enable them:
http://msdn.microsoft.com/en-us/library/ms191294.aspx
Start SQL Server Browser Service using SQL Server Configuration Manager.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

Can't connect to my sql server express 14 database following an automatic update on my pc [Closed]

hi
following an automatic update a few minutes ago that resulted in a pc re-start, i cannot connect to my database anymore.
is there any solution to overcome this issue?
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
ps: i never got server or instance related error before the update
Cheers

in case it might help, i've finally found the solution:
-enable/start sql server browser from sql server configuration manager
-update status to "enabled" for all protocol names in my instance

What is the correct procedure to connect and collect events from IPS through SDEE

What is the correct procedure to connect and collect events from IPS through SDEE?
We are a 3rd party application, that needs to collect and analyze the IPS events for a client.
Currently the approach we are following is
1) get a SubscriptionId using the URL below
https://IP_Of_IPS/cgi-bin/sdee-server?action=open&events=evIdsAlert&force=yes
This gets us a subscriptionId which is used in step 2
2) Collect events from the url below
https://IP_Of_IPS/cgi-bin/sdee-server?confirm=yes&action=get&subscriptionId=sub-sample&startTime=1362699903575432000
a few more notes here are
- starttime is current time in nanoseconds
the peculiar problem here is that, even though we specify todays date, SDEE returns us the events from mid Feb (today is march 7)
we did try a few combinations, but are out of ideas.
any help or direction would be appreciated

This is more an application issue than an IPS issue.
Have you compared your app against other apps [IME]?

What is the correct adapter to connect my Macbook pro with mini-dvi to my TV with Scart

I have a MacBook Pro with mini-DVI and I want to connect it to my TV which has only a scart thing.
Can I use the mini-DVI to Video-Adapter and then a Video to Scart-Adapter?
Thanks for your help!

So of course you've corrected the title : "What is the right PLUG to connect my macbook pro to my TV ?"
OK so a bit more info : my TV is a Sony Trinitron TV.
It has the yellow/red/white plugs. I don't believe it has anything more sophisticated or recent than that.
Thanks for your help !

SQL Server Express 2014 on Win8.1: Could not find the Database Engine startup handle

Hello,
I tried to follow all the similarly titled posts in this forum, yet no solution seems to work, so I hope I can find some up-to-date suggestion here (most of the older posts refer to versions from 2008 to 2012...).
I have installed Visual Studio 2013 (with the latest Update 2 RC) on a freshly installed development workstation with Win 8.1 with all its updates. Now I'd want to install SQL Server 2014 Express, but the setup keeps failing with the dreaded "Could
not find the Database Engine startup handle" error (the log follows below).
What I tried:
1) download again and repair. Same error.
2) completely uninstall by launching setup.exe /Action=uninstall (success), then rebooting the OS, then installing again. Same error. I did this twice, the second time I also manually removed any directory left out in C:\Program Files etc.
When I launch the setup, I select all the components for installation in the package SQLEXPRADV_x64_ENU.exe (1.12 GB, last downloaded today -Apr 3, 2014-), and accept all the defaults including the proposed services accounts. There is no preexisting
SQL Server instance, as expected.
The setup takes its time, and finally fails with the error quoted above. I really do not want to reformat my HD and fully reconfigure my workstation, which took about 3 days... Could anyone suggest a solution to have SQL Server 2014 setup so I can start
developing instead of wasting time in administering the system?
Thanks to all! The log follows.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2014-04-03 18:30:58
End time: 2014-04-03 19:04:41
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: DIOMEDES
Machine processor count: 4
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Daniele\Downloads\SQLEXPRADV_x64_ENU\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, CONN, BC, SDK, BOL, SSMS, ADV_SSMS, LOCALDB
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: DIOMEDES\Daniele
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_183057\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_183057\SystemConfigurationCheck_Report.htm

Thank you, it worked! I suppose that it was really your nr.3 which made the difference. I changed NT Service\MSSQL$SQLEXPRESS to NT AUTHORITY\System for the Data service. I'll then change it again as suggested (any suggestion about a "standard"
account to be used here?), even if this is a development workstation using SQL Server Express only as a local database for debugging, so security is not really a big concern.
Thanks for the feedback.Ya I know No3 was real step but just added more info so as to rule out any other possibility.
No not as such, you wont believe,quite few pf my clients I have worked for keep it with local system and they have not complained yet ,they are afraid to change account as few of them faced issue SQL Server not coming online due to logon failure( after changing
startup account to some domain a and that was happening due to some AD policy.But if you have nay plans to move Critical database in production which would be act as Database to some Internet facing application please follow my suggestion
of running SQL Server with Least privileged domain account.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

What is the correct way to import AVCHD into Final Cut Express?

The Final Cut Expres user manual (p. 221) says to import AVCHD footage with HDV Apple Intermediate Codec: "Important: Use the HDV - Apple Intermediate Codec Easy Setup for ingesting AVCHD footage."
But, Easy Setup has options for both HDV AIC AND AVCHD AIC. Why are there choices for AVCHD if the manual says to import AVCHD with HDV?

The manual is incorrect/human error/typo.
HDV and AVCHD do share the Apple Intermediate Codec as all this incoming footage will be converted to AIC so FCE can work with it on a frame by frame basis.
Call up the FCE>Easy Setups and look at the options.
You will notice 6 options (FCE 4.0.1) for 1080i with differing frame sizes and frame rates.
Only ONE of these is correct for the type of footage to be captured/ingested from the camera.
You need to know what the camera settings are, then output to FCE with an exact matching Easy Setup.
These days one camera can be set to different options making this decision one based on knowing how to operate the camera menu and select the right options.
When an FCE Easy Setup is changed only NEW Sequences will reflect the change not existing ones. In fact, in many cases, if the Easy Setup and incoming footage don't match it simply won't work causing the user to curse the Apple software.
First step is to select the correct Easy Setup then capture/ingest.
For AVCHD it will be an AVCHD - Apple Intermediate Codec........................
Example:
Camera has shot AVCHD 1920x1080i50
Easy Setup will be AVCHD - Apple Intermedaite Codec 1920x1080i50
The above example is for PAL interlaced, that's what i50 means.
NOTE: FCE will not work directly with p (progressive) footage so make sure your camera shoots i (interlaced).
Al

What is the correct answer is this question is sql ?

hi .. please i need correct answer in this question ..
View the Exhibit and examine the structure of the PRODUCTS table.
Using the PRODUCTS table, you issue the following query to generate the names, current list price, and
discounted list price for all those products whose list price falls below $10 after a discount of 25% is applied
on it.
SQL>SELECT prod_name, prod_list_price,
prod_list_price - (prod_list_price * .25) "DISCOUNTED_PRICE"
FROM products
WHERE discounted_price < 10;
The query generates an error.
What is the reason for the error?
A-The parenthesis should be added to enclose the entire expression.
B-The double quotation marks should be removed from the column alias.
C-The column alias should be replaced with the expression in the WHERE clause.
D-The column alias should be put in uppercase and enclosed with in double quotation marks in the WHERE clause.

Hi,
Have you taken the time to determine what happens when you perform the requested actions?
If you have access to Oracle Database it should be less than a 10 minute exercise.
At a minimum, using hosted Oracle Application Express you have access to Oracle Database.
If you've done it, what were the results? There should be a telling error message.
Regards,
Mark

What are the Major and Minor Diffs between oracle,sql server,MSAccess

Hi all,
Can any one explain or send me all the diff between
oracle ,sql server,access..like how much data can each
support,...
Thanks

Dear sir,
here it is.
http://www.oracle.com/database/product_editions.html

What are the Basic Differences between Oracle and MS-SQL server Database?

Hello,
anybody pls Guide me about the Differences between Oracle and MS-SQL server Database.and also IBM Databases also
Regards,
Balaram

SQL Server only works on Windows-based platforms, including Windows 9x, Windows NT, Windows 2000 and Windows CE.
In comparison with SQL Server , OracleDatabase supports all known platforms, including Windows-based platforms, AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series HP-UX, Linux Intel, Sun Solaris and so on.
The SQL Server advantages:
SQL Server holds the top TPC-C performance and price/performance results.
SQL Server is generally accepted as easier to install, use and manage.
The Oracle Database advantages:
Oracle Database supports all known platforms, not only the Windows-based platforms.
PL/SQL is more powerful language than T-SQL.
More fine-tuning to the configuration can be done via start-up parameters.
Samrat

SQL Server Express 2014 service has to be restarted for users to connect.

We have recently upgraded from Server 2003 with MSSQL to Server 2012 R2 with SQL express 2014. When we moved all the databases and permissions to the new server, no one had any issues connecting to the database.
Now it seems that after long periods of time, we are having to restart the SQL service in order for the users to connect. I am not "well versed" in SQL and was looking for some input from the forum.
I know you will most likely need more information so please let me know what you would need so I can further troubleshoot this issue.
Thanks for your time and help.

Hello,
Could you please examine the event viewer (Control Panel – Administrative Tools) and share with us any errors you may find?
http://windows.microsoft.com/en-us/windows/open-event-viewer#1TC=windows-7
Could you please examine SQL Server error log also and share any errors you may find?
http://msdn.microsoft.com/en-us/library/ms187109(v=sql.120).aspx
http://msdn.microsoft.com/en-us/library/ms175832(v=sql.120).aspx
If you use Windows backup feature, could you please verify if it includes a backup of SQL Server. That may be a possible
cause.
Make sure user databases do not have the “Auto close”
option set to true.
http://msdn.microsoft.com/en-us/library/bb402929.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Reinitialising sql server connection in ssms sql server express

As a beginner I added several databases to my server in sqlexpress. These are now resident in connect to server in ssms. However I used the normal delete function in windows to delete some of the databases, without realising what would happen. As a result the
server ./sqlexpress retains references to the deleted databases showing up in ssms connect to server. How do I get rid of those references please. I am using vs2010 and vs 2012 express.
I have tried connecting to the databases using ssms but since the databases don't exist the connection fails. There's also a question of passwords since i'm using sql asuthentication and these databases were used over a year ago. Quite simply I don't know what
to try and a search on re-initialization on the web only comes up with install, or re-install and seems to center around 2005 versions of vs

Can you try detach option? Right click on db name and choose detach
If that also doesn't work try Take Offline option.
This has worked for me in the past.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Having problems connecting Coldfusion10 with sql server express 2012

Hi,
I am having problems setting up a datasource for a local sql express 2012 server. Its running as the default instance. Connections are working with ODBC and client told just not Coldfusion.
When I try to set up a connection using the sql driver I get this error:
Connection verification failed for data source: Leaf
java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: 127.0.0.1:1433. Reason: Invalid argument: connect
The root cause was that: java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: 127.0.0.1:1433. Reason: Invalid argument: connect
When I try a Socket connection with an ODBC connection I setup in windows I get this error:
Connection verification failed for data source: LeafDB
java.sql.SQLException: [Macromedia][SequeLink JDBC Driver]Internal network error, connection closed.
The root cause was that: java.sql.SQLException: [Macromedia][SequeLink JDBC Driver]Internal network error, connection closed.
Any ideas?
Thanks,

Hi Rossco199,
The issue is likely caused by you not having yet assigned port 1433 in SQL Express itself. Follow the procedure described on the following page, and you should solve the problem: http://www.tensixconsulting.com/2012/02/sqlserverexception-the-tcpip-connection-to-the-hos t-port-1433-has-failed/
In particular, remember to assign port 1433 to 127.0.0.1 and to IPAll. Also set 'Active' and 'Enabled' to 'Yes' for the IP 127.0.0.1. While you're at it, if 'Named Pipes' is disabled, you should right-click on it and select 'enable'. Afterwards, restart the Windows service 'SQL Server(SQLEXPRESS)'.
It is advisable to allow ColdFusion server authentication. However, the SQL Express server is configured by default to allow only Windows authentication. This conflict may lead to errors.
Should you then encounter the dreaded Error 233: "No process is on the other end of the pipe", proceed as follows. Open the tool Microsoft SQL Server Management Studio. Right-click on the name of your database server, then on Properties. In the user interface that opens, click on Security. Select the combined 'SQL Server and Windows Authentication mode'. Restart the service 'SQL Server(SQLEXPRESS)'.

Connecting to MS sql server express 2008

Hello
I am trying to make a connection to a locally installed SQL server.
So far i have created a new Database called Webtek.
I have added the sqljdbc4.jar files to my project (i'm using eclipse)
Im an trying to connect to the database using the following command: String connectionUrl = "jdbc:sqlserver://127.0.0.1;instanceName=Webtek;user=guest;";
This however only results in a timeout.
Thanks.

//url here
String url = "";
//driver name
String driver = "";
//user name
String userName = "";
//pwd
String password = "";
try {
                Class.forName(driver).newInstance();
            } catch (Exception e) {
                System.err.println(e.toString());
            try {
                 Connection conn = DriverManager.getConnection(url, userName, password);
                System.out.println("Database connection established");
            } catch (Exception e) {
                System.err.println("Cannot connect to database server");
            }

What is the correct URL to connect to my Sqlbase DB

I have a simple little application that is attempting to connect to a Sqlbase DB on my Windows 95 PC. The Java2 SDK version 1.3.01_01 is installed on my C:\ drive as well as the Sqlbase driver and my class file. The Sqlbase DB is on the D:\ partition of my hard drive. At first, I was having problems loading the driver using Class.forName, but that seems to be OK now (after fixing my classpath setting.) I am now getting the following error when running the program:
SQLException: SqlbaseSession(): failure to connect to host:
I assume the problem is with my URL string, but I'm not sure what the string should be. The database name is "EPDMO" and I can log on to it through SqlTalk using "connect EPDMO SYSADM/SYSADM". Any suggestions are appreciated.

Correction:
The error message is:
SQLException: SqlbaseSession(): failure in connection to host!
I get the following message if I put anything other than "localhost" in the URL:
SQLException: SqlbaseSession(): failure to connect to host:

What are the correct settings to connect to my network?

All attempts to connect fail with the message to check my settings. I need to know what settings are faulty. There is no way to obtain the answer from the manual as far as I can see.

I have opened ports 80, 443,and 4125 to PCP. The router address is http://192.168.1.1, my address is 221.40.138.170.
Thank you.

What is the correct wording to connect to an SQL Server Express 2014 database?

Similar Messages

Maybe you are looking for