Import of DC ignored, needed to fix prob: DC broken ("HAS NO PUBLIC PART")
Hello,
I have a DC that fails to build. The request log flags the DC as BROKEN immediately without a compile and reads as follows:
DC 'ibm.com/bh/cnfg_ses' in SC 'ibm.com_BHCNFG-SES_1' cannot be built and will be marked as BROKEN.
Used DC 'sap.com/cdev/factory_jee' HAS NO PUBLIC PART 'ejbjar'.
[DC '3989' variant 'default'][SCID=3182] using [PP 'ejbjar' of DC 3659 variant 'default'][SCID=3177][last successful build: 89751]
This DC, though, was imported previously and has this public part. This built before. Something happened to the system that caused it now to not be found. I don't care why (yet). I want to fix this. I think I need to import again (yes?).
When I import again, the import request log reads:
The following DCs are being removed from the request as their imported assemblies do not have any relevant changes and force-import option is not set:
Development Component
"sap.com/cdev/factory_jee" in compartment "ibm.com_BHCNFG-BM_1" attached to request 79,328
[scID: 3,177, dcID: 3,659, parent dcID: 0, current state: OK, action: IMPORTED]
How do I force-import this DC or at least get the imported DC to no longer be ignored?
Is this the right course of action or am I missing something?
Please advise.
Q: you mean the public part of the dc was existed when it is firstly transported to the target track, but for some reason unkown it is disappeared now?
A: Yes, the public part is now not available. CBS shows that it is there, but if you try to "Download public part archive" or compille a DC that references this public part it fails.
The "Download public part archive" action fails with the following response:
<CBSError>
<Code>PP_UNKNOWN</Code>
com.sap.tc.cbs.api.NoSuchPublicPartException: Development component 'cdev/factory_jee' of component vendor 'sap.com' does not contains public part 'client'!
at com.sap.tc.cbs.api.impl.BSState.getPPA(BSState.java:1043)
at com.sap.tc.cbs.receiver.ArchiveServlet$SilentArchiveHandlerStrategy.getPPA(ArchiveServlet.java:2551)
at com.sap.tc.cbs.receiver.ArchiveServlet.getPPA(ArchiveServlet.java:1531)
at com.sap.tc.cbs.receiver.ArchiveServlet.doGet(ArchiveServlet.java:134)
<Trace>
</Trace>
</CBSError>
Q: How often you transport your sc between the track?
A: As often as twice a week as we are in heavy active development.
Q: can you check this dc sap.com/cdev/factory_jee which maybe itself is broken?
A: com.sap/cdev/factory_jee dc and all the rest of the DC's imported in this SC all show as not broken.
Regards,
John
Similar Messages
-
TS2446 Need to fix my apple id
Need to fix my apple Id has been disable
Depending on why it's been disabled, you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
"To import all songs on the CD, click Yes in the window that appears. iTunes starts importing the CD."
I am using a Dell and can't import the CD I need because the window doesn't automatically pop up. How do I fix this? Any thoughts?You could try my script ConvertFormat and see if you like the results. Would be easier than inserting the CDs and correcting the tag info again. Just be aware this is a one-way trip. Once you've thrown away some quality to shrink the files you can't get it back without going back to the source. You may better off investing in a bigger drive.
If you just want to squeeze more on the iPod you can use the built-in iTunes option to convert files to a lower bitrate as they are added to the device.
tt2 -
just want to say that's Block pop-up windows it's realy need to fix not work ever i think in Microsoft explorer it's work good but in firefox else new virsion Firefox4 it's not work right so please yts have to fix it it's so many important addon
[Quote]
Waiting for Tidbits and Elector to grace my post with there constant negativity and start a war of words as usual... since they love stirring the pot and angering the Windows Phone Community every time they reply to posts. I just can't believe they spend that much time here on the forums replying if they are not a paid Verizon employee or a paid basher from a competing platform.
[/Quote]
Well I found nothing wrong in your post. So why even make a statement like the quote I included?
Once more I am a retired government employee. So I have the time to post. Or has my rights been taken away to voice an opinion?
Your posts was great you were not whining about your rights to file complaints to the FCC or FTC etc. One of the best I have read.
And I am not trying to sway you from your phone choice. If you looked at my avitar it shows apple iphones. But I use and have used androids and not Windows phones.
However your numbers of windows phone users all leaving over the issue is miniscule in the number of users of Android and iOS devices.
I have written many times I wish all the devices get updated like iOS devices do. But at present that is not happening
No bashing, no adversarial post just a little common sense is all I use.
And again your post was great.
Good Luck -
I deleted aperture and now my sistem is acting crazy.The dock disappeared and almost all icons are gone except for their names.I have an important project for tomorrow and I desperately need help fixing it.Can anyone help me please?
Well it all started with Aperture 3 trying to import some photos from my iphone.It took ages to import those photos and like I was in a hurry to finish my work in Illustrator so I tryied to force quit on A3 and it didn´t, so I shut down the computer and started over.it was all ok but I uninstalled the A3 and the I realized the icons were back to original form and a few fonts changed.so I Installed the trial version of A3.I did a restart of the system and then there was.aperture lauching but no dock and a 80% of the icons disappeared, but the names of the files and folder remained.and I cand acces the apps from the apple sign on the left corner.I tried also restarting a few time but it´s always the same.I am a recent user of a mac , and please excuse my bad english.If this is in any way useful please help me!
-
8.0.2 - problem 1 - unable to scroll screen down or up when the keyboard is present. When typing text, I am unable to see the text I am writing due to this problem. Huge problem for emails and other cloud based providers that allow for data text entry. While the keyboard is present, I am unable to scroll down to see the text, the screen automatically scrolls back up to the top of the screen. We need a fix ASAP!
Have you tried resetting your iPad? You will not lose any data. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
-
Hi , i'm new here and i would like to ask a question about iPad 2 . Well , actually when i hold my finger on any icon , its not jiggling , i need to fix the icons . May i know what can i do in this case ? thank you in advance ,
Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
My CD's aren't importing anymore. How do I fix this?
My CD's aren't importing anymore. How do I fix this?
What do you need to know?
Here are some things about my computer
and this comes up when I try to drop on desktop
CD apears on desktop
CD appears to upload to iTunes
Every song has no duration -
HT3775 my computer does not recognize or import my movies how do I fix this issue?
when I connect my camera to iMovie, I cannot import my movies, How can I fix this issue?
Do you mean that iTunes on the Mac doesn't recognize the iPad - you cannot see your iPad name under the devices heading in iTunes?
or....
iTunes wants to erase your iPad because you have never synced with this iTunes library before? If you need to make this Mac your syncing Mac now and were unable to move your iTunes library over to the new Mac, read this user tip. It was written for the iPhone, but works the same way for the iPad.
https://discussions.apple.com/docs/DOC-3141 -
I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
Thanks in advance.Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium -
Need to fix the width of a column in interactive report
Hi,
I have a column named 'Comment'. Its have a huge data due to which the lenght of that column in interactive report get increased. I need to fix the length to a desired value.
I used following code in Region Footer:
<style>
table.apexir_WORKSHEET_DATA td[headers=COMMENTS] {
_width: 300px;
min-width: 50px;
max-width: 300px }
</style>
Its solved the problem by fixing the width of the column but the column is not showing the full data now. It is hiding most of its part to fit it in that column.
Please give some idea.
Thanks,
ChandruHi,
I believe you will want to add a height specification to allow for multiple lines. And you may want/need to specifiy how you want lines to wrap.
Add (for example):
height: 60px;
white-space: nowrap;
word-wrap: break-word;
There are defaults and several options for white-space and word-wrap. You may want to look them up and give them a try for comparison.
Howard -
I have Thunderbird version 24.3.0 downloaded to my Windows 7 computer.
When I send an email in Thunderbird it looks fine and when the recipient receives it, it looks fine on the screen, but when she tries to print it, the font is unreadably small. This happens on every email I send her, but not other people's emails she receives. It has happened on some of the emails I receive back from her that contain the information I sent her.
Is there a setting I need to fix or something I can do on my end to address this so this doesn't happen. She is receiving email through AOL online. I believe she is viewing it through either IE or Chrome.I recently tried sending myself an email through Thunderbird to another email account to see if that was the case, but the email came in with a font so tiny that it was unreadable. I had chosen a font type and size (arial 10) and just coming into my outlook inbox was virtually unreadable.
And referring to the person I work with, she doesn't have problems getting anyone else's emails, just ones I send from Thunderbird. -
Firefox 29 is not working, we need a fix. I am on windows 8.1 and have moved on to Chrome.
Since upgrading to Firefox 29, it keeps crashing and I am unable to use it. There was no problem with Firefox 28. We need a fix urgently. Until that time I have moved on Chrome.
Can you give me your crash reports?
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and paste them into your response here. -
Upgrading Stellent 7.5 to OCS 10gR3 Import Process failing HELP NEEDED
Hi,
I am upgrading Stellent 7.5 to Oracle COntent Server 10gR3. Here is what I have done.
1. Migrated all the configuration from Stellent to 10gR3
2. Migrated the Folders from Stellent to 10gR3
3. Migrated the content by creating an Archive and then importing the Archive in 10gR3.
I am seeing lot of errors in the log file. Following are the errors I see in the log file.
1.
Could not send mail message from (null) with subject line: Content Release Notification. Could not get I/O for connection to: hpmail.rtp.ppdi.com java.net.ConnectException: Connection timed out
2.
Import error for archive 'ProductionContent' in collection 'prod_idc': Invalid Metadata for 'ID_000025'. Virtual folder does not exist.
3.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_004118' was not successfully checked in. The primary file does not exist.
4.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_004213' was not successfully checked in. IOException (System Error: /u01/app/oracle/prod/ucm/server/archives/productioncontent/09-dec-21_23.29.44_396/4/vault/dmc_unblinded_documents/4227 (No such file or directory)) java.io.FileNotFoundException: /u01/app/oracle/prod/ucm/server/archives/productioncontent/09-dec-21_23.29.44_396/4/vault/dmc_unblinded_documents/4227
5.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_031414' with revision label '2' was not successfully checked in. The release date (11/4/08 9:12 AM) of the new revision is not later than the release date (11/4/08 9:12 AM) of the latest revision in the system.
6.
Import error for archive 'ProductionContent' in collection 'prod_idc': Invalid Metadata for 'ID_033551'. Item with name '07-0040_IC_Olive-View_UCLA_ERI_Cellulitis_2008-08-26.pdf' already exists in folder '/Contribution Folders/2007/07-0040/07-0040Site_Specific_Documents/07-0040Olive_View_UCLA_Medical_Center/07-0040Archive/07-0040Essential_Documents_ARC/07-0040Informed_Consent_ARC/'.
7.
Import error for archive 'ProductionContent' in collection 'prod_idc': Aborting. Too many errors.
QUESTIONS:
Is there a way to keep the import processing running even if the errors are coming. As it looks like when there are too many errors the import process stops in the middle.
How do I find out the total number of folders and the documents. As I want to run the same query on Stellent 7.5 and find out total number of folders and the documents and then run the same query on 10gR3 and compare the results. Just want to fnd out how much content is imported.
How do I run the import process over again as half of the content is imported and my import process failed in the middle when running the process over again what settings do I need to provide to make sure no duplicates get created etc.
Any help is really appreciated.
ThanksHi
There are a couple of ways to get around the issues that you are facing such that import process is not interrupted because of these. They are as follows :
1. Use ArchiveReplicationException component . This will keep the import process running and make a log of the failed process which can be used for assessing / gauging the success of the import and what all needs to be redone.
I would suggest this as the option for your case.
2. Put the config variable for arciver exception to 9999 so that the archive process stops only after hitting the limit of 9999 errors.
I would suggest to go for step 1 as that would be a much more foolproof and methodical way of knowing what all items have failed during import.
Thanks
Srinath -
My iWeb just crashed and has vanished from my computer. The icon is visible but it will not open. Can anyone help? I desperately need it fixed as its my business website and i was in the process of updating it
Where was this site hosted?
Apple eliminated iWeb in July!!!
http://en.wikipedia.org/wiki/IWeb#Discontinuation_of_iWeb_in_iCloud_Transition
http://www.macworld.com/article/1160728/apple_mobile_me_transition_faq.html
Maybe you are looking for
-
F4 help for Application Server
Hi all, i have a requirement like selection screen for F4 help where i need to pick the file from Application Server. When i click on the field on selection screen it should display like same as the AL11 How can this posssible by calling any Function
-
My system was running fine. I had to move the TestStand PC to another location and now when it attempts to generate the report I am getting this error. What is causing this?
-
as I tried to state in the sentence above, I vehemently hate the new download system and want to revert back to the old downloads page popup I read a similar question and tried the about:config solution given by corel https://support.mozilla.org/en-U
-
Reassign text element to a different package?
Hi All, I want to reassign the program text elements to a different package. Note: I dont want to reassign program, have to reassign text elements only. Kindly help. Thanks, Navneeth K.
-
Camera Connection Kit: Some photo wont transfer
I took a couple test shots with my DSLR thats shooting in RAW. Some of the photos transferred over just fine, but some did not. No settings on the camera were changed between the shots. Everything is just fine. But when you go into "Photos" some of t