Import Specification: Specification List (CG33)

Hi all,
I am trying to import a specification with the CG33, but i cannot do it. It looks for the specification, but it doesn´t create a new specification like I want.
Somebody knows how i have to do it?
Thank you very much. María.

Mark,
I have an identifier in my load file, like you can see here:
+C
+SC   MS-NT
+C    for example the character norm "ISO-R/3"
+ID   EH&S
+V    PLM 1.0
+D    20080313
+VD   20080313
+C
+SL   E
+DF   DD.MM.YYYY
+DN   ,
+C
+BC   phrase catalog
+ID   CUST
+V    2007-2
+D    20071101
+EC
+BS
+BV   $ESTRH
SUBID                          UN1170_01
SUBCAT                         LS_UN_SUB
AUTHGRP                        ALL
+EV
+BV   $ESTRI
IDTYPE                         NUM
IDCAT                          UN
IDENT                          1170
ORD                            0001
+EV
Thank you again. María.

Similar Messages

Is there a way to import specific information into a form?

is there a way to import specific information into a form?

No, we currently don't support preopulating a form.

Custom itemRenderer in a F3 ComboBox on specific list items after combobox creation

Hi,
I'm trying to set a specific list item in a mx combobox to have a custom item renderer, the problem is that I cannot do this via mxml, it needs to be done via actionscript at a later stage, eg: combobox gets created, combobox gets populated, user does other tasks, combobox needs to set one or more items in the combobox to have icons (via item renderer)..
I can do this via the onChange event, but it only applies the icon when the combobox is opened and there is a slight delay so you can see the icon being added.
Thanks in advance for any help
J

Hi,
If I understand correctly, you can create you comboBox with all items at the begining:
http://blog.flexexamples.com/2007/08/18/displaying-icons-in-a-flex-combobox-control/
After that, base on user task, you can filter you comboBox:
http://blog.flexexamples.com/2008/03/12/using-a-combobox-to-filter-items-in-a-datagrid-in- flex/
In this way you don't see the delay.
Johnny
Please rate answers.

How to validate data is in specific list while loading from SQL*Loader

I have a sample data file like below
1,name1,05/02/2012 10:00:00,blue
2,name2,06/02/2012 10:00:00,red
3,name3,07/02/2012 10:00:00,yellow
4,name4,08/02/2012 10:00:00,white
I would like to validate 4Th column to be a valid color (ie) All color should be in a specific list, if it is not in the lis then the record should do to bad/discard file
How can do that while loading Data From SQL*Loader?

user8860934 wrote:
I have a sample data file like below
1,name1,05/02/2012 10:00:00,blue
2,name2,06/02/2012 10:00:00,red
3,name3,07/02/2012 10:00:00,yellow
4,name4,08/02/2012 10:00:00,white
I would like to validate 4Th column to be a valid color (ie) All color should be in a specific list, if it is not in the lis then the record should do to bad/discard file
How can do that while loading Data From SQL*Loader?Probably a lot easier with an EXTERNAL TABLE (they're much more flexible).
Is SQL Loader a mandatory requirement for some reason?

I want to configure Firefox to only accept cookies from a specific list of websites, but my "Allow Exceptions" list is deleted when Firefox closes.

I want to configure Firefox to only accept cookies from a specific list of websites, but my "Allow Exceptions" list is deleted when Firefox closes. (Firefox 5.0)

@dmcritchie:
''How do you expect to keep cookies for certain sites, if you wipe out all of your cookies when the session ends or you clear the same history through the Tools menu''
If you mean from session-to-session, I don't expect it to keep cookies. That's the whole point. Every time Firefox is opened, I want it to write a new cookie, and keep that cookie until it closes and no longer than that. (Perhaps I should clarify: I don't mean session in the networking sense but rather in the period of time when one starts using Firefox until Firefox closes.) The behavior I want is for it to be able to write cookies when open, but only for specific sites, and then forget about them on close.
I should also mention that your responses are worthless to me because you don't explain anything. For instance, the quote above is ''not'' obvious from your reply of "Make sure you are not clearing cookies". You need to explain this; what is obvious in a reading for you is not obvious for everyone.
Furthermore, how is "Site Preferences" related to "everything on the right-side"? (Not to mention that it's unclear what you mean by "right-side.")

Exporting and Importing Specific Folders in Discoverer

Hi,
Can any one tell me how to export and import specific folders in Discoverer using command line.I tried using discoverer admin but the while importing the folders it is going to orphan folders.
you help appreciated

If using admin, go into the folder manager (I think it is on the tools menu), and assign the newly imported (and orphaned) folders to the BA where you want them to be.
I'm not certain that the command line will not leave orphans (but I rarely use command line, so I could be wrong).

Hi, This was not what I meant. The requirement is: Drag and drop any one of specific list

Hi,
This was not what I meant.
The requirement is:
Drag and drop any one of specific list of components say x, y,z in the parsys
Only after the drag and drop of these components other components can be dragged to the parsys. So we can say that the parsys should allow only the specific components to be added first and only after that other components can be added.
Thanks ,
Dipti

Hi there
I'm guessing that you mean to ask if one is able to force a user to perform a drag-and-drop as part of a simulation?
Unless you program it in Flash or some other application it isn't avaiable. Check the link below for more.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Where can I get a specific LIST of the warehouse builder "core features" ?

I see references to a specific list in various places for 10gR2 and 11g but have yet to stumble upon said list. Can someone give me a URL? So far the main thing I see as an added option is Data Pump.
Thanks

Well, this looks about as specific as Oracle is going to make it. They say essentially what you said, if you don't see it in the defined extra cost option assume it's a core capability. But the reason I was thinking Data Pump is extra cost is things like this:
[Oracle Warehouse Builder Enterprise ETL Option|http://download.oracle.com/docs/cd/B28359_01/owb.111/b31278/concept_overview.htm#CEGEIDFG]
Enables higher developer productivity in (larger) projects. Also
allows for reuse of transformation logic and for certain *fast
extraction methods in large volume data movements.*

Javascript: Query all users with read permission to specific list

Is it possible to use javascript to retrieve all users with read permissions to specific list? This (http://www.c-sharpcorner.com/UploadFile/anavijai/how-to-get-all-the-users-from-site-group-in-sharepoint-2013/) shows how to get users from group but what
about list. All users in list may not exist in spgoups.

Hi,
If with Server Object Model which is executed in server side, in the
SPList object, there is a
RoleAssignments property can help to get what you want without looping through all the users in site:
public static void getPermissionsOfList()
using (SPSite site = new SPSite("http://sp"))
using (SPWeb web = site.RootWeb)
SPList list = web.GetList("/Lists/List1");
SPRoleAssignmentCollection roles = list.RoleAssignments;
foreach (SPRoleAssignment role in roles)
Console.WriteLine("~");
Console.WriteLine("Name: " + role.Member.Name);
SPRoleDefinitionBindingCollection bindings = role.RoleDefinitionBindings;
XmlDocument doc = new XmlDocument();
doc.LoadXml(bindings.Xml);
//Console.WriteLine(doc.InnerXml);
XmlNodeList itemList = doc.DocumentElement.SelectNodes("Role");
foreach (XmlNode currNode in itemList)
string s = currNode.Attributes["Name"].Value.ToString();
Console.WriteLine("Permission Level: " + s);
However, when comes to JavaScript Client Object Model, as there is no such property provided, I suggest you take the solution provided in my previous post for a try.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Trigger of Import Declaration (Work List) for SO based inbound flows in ECC

Hello Experts,
I am running a feasability study for GTS Customs managment Import. My client is using SO based flows for the return flows (SO-Delivery-Mtrl Document). In order to use local clearance (to avoid VAT and Customs Fee) we need to set this flow up in SAP and enable the doucment transfer from ECC to GTS.
We have come up with a few high level alternatives for the trigger for the GTS Import Declaration. It would be great if you could have a look on them and let us know your thoughts. What is feasible and what is not? Any recommendations?
Alt 1: Create Z program for the RFC call to GTS which basically is a copy of the standard program but it modifies the SO to be perceived as an PO in GTS and the Delivery to be perceived as an Inbound Delivery.
Alt 2: Use the SPL check which is set up in GTS Compliance management. Might be an alternative since the SO and Delivery is transferred to GTS for the SPL check. We should be able to find some user exit or BADI in the SPL check from where we can trigger det SO and Delivery to the Work List in GTS Customs Management.
Alt 3: Integrate the feeder system with GTS as an external system. This will require that we have IDoc outputs from the SO and Delivery on the feeder side and that we activate BAdI for Mapping External Data with or w/o Document Reference in GTS.
Alt 4: Treat the SO import flow as an Export flow in GTS (triggering it through a proforma document on the feeder side) but configure the activity sequence according to the Customs Authorities import specification.
Another question that we have is relating to GTS Inventory Management which we must use in order to use local clearance procedure. Is it possible to set up GTS inventory management without a Customs Warehouse and without configuring the Customs ID on the feeder side? Could it be used with the any of the alternatives above?
Any input is welcomed.
Thank you and best regards
Andreas

You mentioned that you are looking to use local clearance (to avoid VAT and Customs Fee), I read this as using the customs warehouse functionality in GTS.
If you have the customs warehouse set up, you may want to check out the returns order movement type (651) This is what the GTS library says: u201CThe system treats returns orders with returns deliveries (651) in the feeder system just like a receipt posting from a regular goods movement, because you post goods receipts in the feeder system by choosing a goods issue based on an outbound delivery. The customs warehouse handles these postings just like goods receipts, however, and therefore analogous to regular goods movements for customs warehouse receipts, with movement type 101.u201D
So if you have a goods receipt, you can create a entry into the customs warehouse. To get it out, youu2019d need some type of outbound movement. GTS would see this as an issue (reduction) of the customs warehouse. This outbound does not necessarily need a connection with a specific PO.
Also, for customs warehouse, this outbound movement, if it is customs cleared in the country where the customs warehouse is located is a u201Cdomestic movementu201D.
If a material is flagged as batch relevant, you can add a batch reference at the time of PO, or inbound delivery. For sales, you can add at time of SO or goods issue.
This batch number serves as a link for the transaction data. This number allows you to track the materials in a transaction through the purchas/mfg/sale process. Attached to the number can be a great deal of info on the material in the transaction. Through the batch reporting, you can track forwards or backwards all the follow-on transactions associated with the batch.

How do I import a long list from either exel or word into dropdown list in acrobat?

How do I import a long list from either exel or word into dropdown list in acrobat?

There is not a built-in method for this unfortunately, but you can use JavaScript to help out. Specifically the setItems field method.
If you'd be interested in testing out a tool that greatly simplifies this process, feel free to contact me by email at: acroscript at gmail dot com

Import java.util.* or import java.util.List...?

does "import package.*" has performance issue?

does "import package.*" has performance issue?This had issues with older versions. The compiler optimizes the code to manage imports.
http://saloon.javaranch.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic&f=1&t=008968
As far as maintainability is concerned, it is better to import specific classes instead of the complete package.
***Annie***

How To Import Approved Supplier List ?(do not create PO)

hi,
when i import Approved Supplier List through the Purchasing Document Open Interface (PDOI). Affter this ,a Purchase Order be created.
i do'nt want PDOI to create Purchase Order ,how to do??
thanks very much !!
==========================================
my test data is :
l_iface_rec po.po_headers_interface%ROWTYPE;
l_iface_lines_rec po.po_lines_interface%ROWTYPE;
l_iface_rec.org_id := l_org_id;
l_iface_rec.interface_header_id := 101;
l_iface_rec.process_code := 'PENDING';
l_iface_rec.action := 'ORIGINAL';
l_iface_rec.document_type_code := 'BLANKET';
l_iface_rec.document_subtype := NULL;
l_iface_rec.document_num := NULL;
l_iface_rec.approval_status := 'APPROVED';
l_iface_rec.agent_id := 61;
l_iface_rec.vendor_id := 1;
l_iface_rec.vendor_site_id := 1;
l_iface_rec.interface_source_code := 'Test';
l_iface_rec.batch_id := 987654321;
l_iface_lines_rec.interface_header_id := 101;
l_iface_lines_rec.process_code := 'PENDING';
l_iface_lines_rec.action := 'ORIGINAL';
l_iface_lines_rec.line_num := 1;
l_iface_lines_rec.line_type_id:=1;
l_iface_lines_rec.item_id := 1001;
l_iface_lines_rec.unit_price := 1.01;
Edited by: Shaowei.Zhang on 2009-11-20 下午9:39

Hi Shaowei;
Please follow below and see its helpful:
[Link 1|http://www.oracleappshub.com/oracle-purchasing/approved-supplier-lists-asl/]
[link 2|http://forums.oracle.com/forums/thread.jspa?threadID=936670&tstart=15]
Regard
Helios

Error in QP: Bulk Import of Price List

Hi All,
I am trying to import price list records using the concurrent program 'QP: Bulk Import of Price List'. I am facing one issue in this...below is the error detail:
7164262/PRL/QP_INTERFACE_LIST_LINES//RAGH-L-3 A price break child line must have at least one pricing attribute.
The header and Qualifier records are getting imported sucessfully, the issue is with the line and it's attributes. Below are the fields on interface tables whcih i m populating:
INSERT INTO QP_INTERFACE_LIST_LINES (
ORIG_SYS_LINE_REF,
ORIG_SYS_HEADER_REF,
LIST_LINE_TYPE_CODE,
START_DATE_ACTIVE,
END_DATE_ACTIVE,
ARITHMETIC_OPERATOR,
OPERAND,
PRIMARY_UOM_FLAG,
PRODUCT_PRECEDENCE,
INTERFACE_ACTION_CODE,
PROCESS_FLAG,
PROCESS_STATUS_FLAG,
PRICE_BY_FORMULA,
AUTOMATIC_FLAG,
REPRICE_FLAG
--PRICING_GROUP_SEQUENCE
) VALUES
'RAGH-L-3',
'RAGH-H-3',
'PLL',
sysdate,
NULL,
'UNIT_PRICE',
150,
'Y',
230,
'INSERT',
'Y',
'P',
NULL,
'Y',
'Y'
--0
INSERT INTO qp_interface_pricing_attribs
orig_sys_pricing_attr_ref,
orig_sys_line_ref,
orig_sys_header_ref,
PRODUCT_ATTRIBUTE_CONTEXT,
product_attr_code,
product_attr_val_disp,
product_uom_code,
interface_action_code,
process_flag,
process_status_flag,
PRICING_ATTRIBUTE_CONTEXT,
PRICING_ATTRIBUTE,
PRICING_ATTR_VALUE_FROM_DISP,
COMPARISON_OPERATOR_CODE,
PRICING_ATTR_VALUE_TO_DISP )
VALUES
'RAGH-ATTR-3',
'RAGH-L-3',
'RAGH-H-3',
'ITEM',
'INVENTORY_ITEM_ID',
'CM13139',
'EA',
'INSERT',
'Y',
'P',
'ADS_PRICING',
'COST',
'25',
'BETWEEN',
'30' );
Using the above process I am getting the error as mentioned:"7164262/PRL/QP_INTERFACE_LIST_LINES//RAGH-L-3 A price break child line must have at least one pricing attribute.".
If I am not using the pricing attributes PRICING_ATTRIBUTE_CONTEXT,PRICING_ATTR_CODE, Pricing_attr_value_from,COMPARISON_OPERATOR_CODE, PRICING_ATTR_VALUE_TO I am able to import the line records also.
The script provided by Oracle also uses the same columns in the interface table, kindly help me if any one have any idea regarding this issue.

Hi Luko,
I tried the same script given by oracle, but it is giving me the error as I mentioned earlier. When I am not using the pricing line attributes, it is working fine. The error is coming only when I am passing the pricing attribute parameter(PRICING_ATTRIBUTE_CONTEXT, PRICING_ATTR_CODE, PRICING_ATTR_VALUE_FROM_DISP,
COMPARISON_OPERATOR_CODE, PRICING_ATTR_VALUE_TO_DISP).
I am passing the values as shown below:
PRICING_ATTRIBUTE_CONTEXT-Code fro pricing context i.e PRICING ATTRIBUTE
PRICING_ATTR_CODE-code for attribute i.e. FREIGHT_COST
PRICING_ATTR_VALUE_FROM_DISP-200
PRICING_ATTR_VALUE_TO_DISP-300
COMPARISON_OPERATOR_CODE-BETWEEN
Thanks!

How to use QPXVBLK: QP: Bulk Import of Price List?

hi,
i'm trying to create a script for import price lists. i've read that this concurrent program "QPXVBLK: QP: Bulk Import of Price List" is what i need. i've been able to successfully create the script to populate the interface tables:
QP_INTERFACE_LIST_HEADERS
QP_INTERFACE_LIST_LINES
QO_INTERFACE_PRICING_ATTRIBS
but i'm getting an error.
3436374/PRL/QP_INTERFACE_LIST_HEADERS/24934 Cannot perform Insert, as record with orig_sys_header_ref 24934 already exists for the list_source_code .
i figured it has something to do with the ORIG_SYS_HEADER_REF, ORIG_SYS_LINE_REF and ORIG_SYS_PRICING_ATTR_REF columns.
below are values i'm currently passing.
QP_INTERFACE_LIST_HEADERS TABLE
- ORIG_SYSTEM_HEADER_REF = LIST_HEADER_ID
QP_INTERFACE_LIST_LINES TABLE
- ORIG_SYS_LINE_REF = LIST_LINE_ID
- ORIG_SYS_HEADER_REF = LIST_HEADER_ID of parent record in QP_INTERFACE_LIST_HEADERS TABLE
QP_INTERFACE_PRICING_ATTRIBS TABLE
- ORIG_PRICING_ATTR_REF = PRICING_ATTRIBUTE_ID
- ORIG_SYS_LINE_REF = LIST_LINE_ID of parent record in QP_INTERFACE_LIST_LINES TABLE
- ORIG_SYS_HEADER_REF = LIST_HEADER_ID of parent record in QP_INTERFACE_LIST_HEADERS TABLE
if these are not correct, what values should be passed on this columns?
thanks
allen

hi all,
ii would like to add a follow up question on this.
what fields are required when inserting records into the interface tables for the QP: Bulk Import of Price List?
i've been running some tests and while some price lists are imported with no issues, some are not and some only partial. i'm not receiving any errors on the import which makes this harder for me to debug.
any thoughts?
thanks.
allen

Import Specification: Specification List (CG33)

Similar Messages

Maybe you are looking for