Import Wizard fails to export - object could not be written in the ids-file

Hello,
the complete export of the BO environment into a biar-file with the import wizard fails. In the wizard's dialog every option is choosen as "all". When the export is started it stops already in the folder objects. The log file says the object allocation could not be written in the ids-file. So I presume a problem with references.
In order to figure out which object is responsible for the error I varied the export and finally identified the "repository objects" as the the responsible type of objects. When I now run the export and only use the needed repository objects it works fine.
But I don't know, if export is complete (I presume it).
Has anyone a idea what the reason can be for this problem? Can it be fixed in the database? This kind of export did work fine the week before.
thanks, matthias

Could you quote the entire error message, word-for-word, verbatim? What Import settings are you using ... Copy, Move, Add?
Most likely you have a permissions issue, but it will be much more clear to me if I can see the entire message.

Similar Messages

"The attempted operation failed. An object could not be found" error when double clicking on an ics file

Operation System: Windows 8 Pro
System Type: 64-bit Operating System
Office: MS Office Professional Plus 2013
I am getting "The attempted operation failed. An object could not be found" error when I double click on an .ics file to an appointment to my calender. My outlook.com account's data file is set as default and this error only occurs if
that is the default data file. I thought that maybe my profile is corrupted. So, I opened up a new profile with the below steps and only add my outlook.com account there:
1-) Open up the Control Panel and go to Mail section
2-) Click "Show Profiles"
3-) Click "Add" and give a name to your profile.
4-) Configure your outlook.com account (with Auto Account setup, not manual steps)
5-) Finally, set that profile to be used always.
Then, I opened up the Outlook 2013 and clicked on the .ics file to add that appointment but got the same error.
Is this a known issue or specific to me?
Thanks!

yes, I have the same problem.
The workaround of saving the ICS file and then importing it into the current calendar
works,
but the ICS calendar
displays in other section, NOT in the section of my old events.
why ??

When you try to send or to receive email in Outlook 2010, you may receive one of these error messages: 0x8004010F: Outlook data file cannot be accessed. or 0x8004010F: The operation failed. An object could not be found.

0x8004010F: The operation failed. An object could not be found.
1. reviewed Profile instructions
2. Ran SytTools thinking it would fix the error. NO although I could send received I ended up with a giant pst
3. Back to Profile Instructions.
4. Set up new profile with my email address. email address tested well. Run Outlook. loads as outlook data PST
and gmail address PST. Deleted all the Gmail subscriptions to improve speed. Original error was gone but have two GIGANIC PST FILES.
5. Set up another new profile with my email address and a named pst. Run Outlook under that Profile -
comes up with newly named pst and the gmail addrress pst (although I can't figure out where that pst is located. Will not let me use email address as default Profile. Tried different approaches and still ended up always with the gmail address pst. Deleted
all profiles but email address and comes up.
6. Should I just go ahead and use the gmail address pst I need to import data or download data from gmail
to get last years correspondence.e
7. Outlook is my lifeblood, I am in communications and every submitted email gets moved to a file with an update.
Help?
8. One option is to merge psts but might make worse mess.
Thanks. Beautiful Beach weather here!

To resolve error 0x8004010F , identify the current location of your default Outlook data file, and then create a new Outlook profile.
Step 1- Locate the default Outlook data file
Click Start, and then click Control Panel.
In Control Panel, click Mail.
In the Mail Setup - Outlook dialog box, click Show Profiles.
Select your current Outlook profile, and then click Properties.
In the Mail Setup - Outlook dialog box, click Data Files.
Select the Data Files tab in the Account Settings dialog box, and then note the name and location of the default data file for your profile (a check mark will denote the default data file).
Click Close.
Step 2 - Create a new Outlook profile
Step 3 - Configure your new Outlook profile as the default profile
More detailed steps you can refer to this KB article:
http://support.microsoft.com/kb/2659085

Microsoft Access will not Sync to SharePoint - Publish Failed: The Object Could not be Committed to the Server

I created a very simple Microsoft Access database with one table and one form. When I published it to SharePoint, everythng worked fine. It published succesfully and there were no errors. I continued to make enhancements to the database and when I attempted
to sync to SharePoint, I got a message that the operation failed. I clicked OK and the issues table noted the following:
Move to SharePoint Site Issues
Issue
Reason
Object Type
Object Name
Field Name
The object could not be committed to the server.
Table
Vendor Location Information
The object could not be committed to the server.
Form
Add a New Vendor
The object could not be committed to the server.
Navigation Pane
Navigation Pane
The object could not be committed to the server.
VBA Properties
VBA References
The object could not be committed to the server.
Database Properties
DBProps
An error occurred while recording the local application status. Please re-synchronize with the Web application. No current record.
<tfoot></tfoot>
I thought this was weird so I downloaded the Assets database from Microsoft to determine if it was my database or something else. After it was downloaded and saved to my computer, I attempted to publish it to SharePoint and I got the same error.
What is weird, though, is that if I use the assets web database template in SharePoint (the one that is preloaded), it works fine. Once I open that database it in Access though and click sync, I get the same error message.
Does anyone know why this is happening?

I tried it again this morning creating a completely new table / form and this is the error I get:
Move to SharePoint Site Issues
Issue
Reason
Object Type
Object Name
Field Name
The object could not be committed to the server.
Table
VLI
The object could not be committed to the server.
Form
ANV
The object could not be committed to the server.
Navigation Pane
Navigation Pane
The object could not be committed to the server.
VBA Properties
VBA References
The object could not be committed to the server.
Database Properties
DBProps
An error occurred while recording the local application status. Please re-synchronize with the Web application. No current record.
<tfoot></tfoot>

The attempted operation failed. An object could not be found. Outlook 2010 error

I am unable to search other mailbox in Outlook 2010, getting the following error: The attempted operation failed. An object could not be found. I removed both instances of
KB2956128
installed
on 2/11/2015. It worked for a while and issue returned againa. Any suggestions?

Hi,
Thank you for your reporting. We have noticed this, and would like to collect more information for further investigation.
Can you guys share your detailed system info? Also, if you have any log files about the issue, kindly share with us by sending them to this email account:
[email protected] (please use the link of this thread as the subject).
We appreciate your assistance with this.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error Message : Object could not be scheduled within the specified time interval

Post Author: mohamed elkashef
CA Forum: Publishing
Dear All when i try to run event for daily reports it sometimes take generation status failed with this error message : Object could not be scheduled within the specified time interval so i need to know the reason of failure and how can i fix this error thanks a lot

Post Author: nvnaresh
CA Forum: Publishing
Dear jsanzone,
I'm facing the same error even when the server time out is more than the query execution time of the report.By server time out I assume connection time out of WebI report server which I have set to 180 min.But the actual query takes maximum of 5 min.
We are using BO XIR2+SP2.
I scheduled a webI report to get saved in Excel format to an Unmanaged disk location upon a File Event.
We have 3 such reports to be scheduled on the same event.
Expected frequency of File Event getting fired in a day is twice.Scheduling frequency I have set it as every one hour with the file event.
This usually should work fine.
But frequently 1 or 2 of the above 3 instances are getting failed with the following error "Object could not be scheduled with in specified time interval " after being in Running state for few hours(8). Amazingly this is not happening every time. May be once or twice in a week.This works fine after I restart the BO services and the same thing repeats after 3 or 4 days.
Do I need to increase any server parameters?
Why is this happening randomly?

FCP X can't import iTunes music - says "The song "Warp Factor" could not be used because the original file could not be located."

FCP X can't import iTunes music - says "The song "XXXXX" could not be used because the original file could not be located."
I saw the reply that iTunes was probably moved. I restored it from Time Machine when my hard drive crashed. How do I fix it to import into FCP X?

I figured it out by going into iTunes and clicking on the Library link under File. This bring up a box that allows the music files to be reconnected to the iTunes music folder.
FCP X now sees the music and it can be placed into the project timeline.

ERROR : Object could not be scheduled within the specified time interval

I have the next error Object could not be scheduled within the specified time interval.
When i schedule a report to be refreshed and the moment come when the report have to be refresh appear the error.
i check the error in the following path in the CMC
HOME> FOLDERS > USER FOLDERS > ... > "REPORT FOLDER" Instance Properties
Why i get this error?
Anyone can give me a good solution to solve this error?
Thanks!!!

Hi Ed,
The above error message is appearing due to the reason, when a large number of requests are scheduled to start at the same time, this may exceed the Maximum Number of Simultanius Requests that the deployment can support.
To resolve this error message, increase the end time on the scheduled instance. To increase the end time, use the following steps:
1. In the Infoview, browse to the desired report and click 'History'.
2. Find the desired scheduled instance and click 'Reschedule'.
3. Under the 'When' section, increase the end time for the scheduled instance.
Upon completing these steps, the error message no longer appears.
Hope it will help in resolving the error.
Regards,
Ritesh Nayyar

HT201210 I am stuck with "The iPad could not be restored because the firmware file was corrupt" message.

Hi
I have an iPad mini and it was on iOS 6.1.3, my friend came and he said that he knows how to install iOS 7 for me. I gave it to him and he tried to install it, but apparently he failed to do so and an "Activation Error" is appearing on the screen now asking me to register in the developers program.
Now, we are trying to restore it back to iOS 6.1.3 using iTunes, the software downloads well and it starts restoring but that I keep getting this error message "The iPad could not be restored because the firmware file was corrupt.".
I am sure that the file is not corrupted because it's downloaded via iTunes regular download and it's not from an outside source.
I am stuck with this now and my iPad is useless this way.
Please any suggestions ?

basselsamo wrote:
Please any suggestions ?
Yes, don't download Beta Software that you have no business or legal right to download and quit taking bad advice from friends.
Now to maybe get you out of the restoring jam, the only thing that I can think of that might work is to use recovery mode, unless you already tried it and it didn't work.
You can read about it here, but the instructions are posted below.
http://support.apple.com/kb/ht4097
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

IPod could not be restored because the firmware file could not be found

Initial problem was no audio and skipping through songs at a rate of about 1 song per second.
Tried the 5 R's and that didn't help.
Installed iTunes 7 and then it wouldn't recognize the nano. Followed Apple's instructions when iPod not recognized, including uninstalling iTunes, uninstalling latent update installers, deleting the iTunes directory, clearing the recycle bin, deleting temp files, etc. Then reinstalled iTunes 7,
Plugged in my nano and Got the message, newer version of iPod software available, update software (version installed was 1.1.1 and newer version available was 1.2)? Clicked ok and that was the start of my troubles. That process failed and suggested that I restore to factory defaults (not exactly what I wanted to do, having to reload my songs, but went along).
Did a restore to factory settings and now get the message
The iPod could not be restored because the firmware file could not be found.
Anyone got any ideas how to update the firmware? I'm hopeful that a file can be downloaded to do this rather than sending in the nano to have it updated.
<opinion on>
After an hour of updating software and a couple of hours of reading the forums looking for the answer, my eyes hurt, it's 2:30am, and I'm frustrated to the point of throwing this in the trash.
My kids have a shuffle and a mini and I've updated software on both with no problems before. If I realized I would have to become a system admin for iPods, I would never have invested.
<opinion off>

Welcome to Apple Discussions!
Take a look at these two articles. The error messages are not the same, but they may help...
http://docs.info.apple.com/article.html?artnum=304309
http://docs.info.apple.com/article.html?artnum=301267
If not, post back.
btabz

When trying to sync or listen to songs in itunes library it says the song on itunes could not be used because the original file could not be found. I am using windows 7.

I have imported cds into my itunes and they appear on my playlist, but when I try to sync to my ipod or listen to them on my computer a message comes up stateing " the songs on itunes could not be used because the original file could not be found". I have not deleted them and am importing them the way I always have. This problem has only been for the last 4 or 5 months. Since updating to the last 2 itunes versions.

The message means that iTunes can not find the original imported music files. iTunes should display a red exclamation mark next to the songs it can not find. You will need to look on your hard drive for the songs/files and than correct the file path in iTunes or just delete the files in your iTunes library and import them again.

"ABC could not be saved, because the source file could not be read" error when downloading

Almost every time I download a file, the download gets to the end and then I get this error "<filename> could not be saved, because the source file could not be read", and then the download fails.
I checked my addons and they are not the problem. This doesn't happen when I try another Firefox profile. I tried several solutions offered in "http://kb.mozillazine.org/Unable_to_save_or_download_files" but they didn't help. It's not my antivirus.
I hate to start another profile because I have my current one just the way I like it.
Please help!

You can check the file attributes of all the files in the Firefox Profile Folder to make sure that you have write permission.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Could not be saved because the source file could not be read.

I tried to download and after a while, this error message: ''[filename] could not be saved because the source file could not be read.'' I've been on google searching but I could not find the answer can someone PLEASE help me. it happened when downloading a game and I've already seen a few times before but it was less important.
sorry for the bad english I used a translator.

This problem isn't only happening with Firefox 4, for windows, as the System Details, and Tags indicate.
I'm using a Mac laptop (OS X 10.5.8 -- Leopard), using Firefox 6, and have been having this problem with large files for quite a while ... possibly since FF 4, but definitely with FF 5. The large files I've had the problem with are in the 500 - 900 MB range, and from commercial sites as well as most recently with a zip file containing photos from a friend which he uploaded to dl.dropbox.com ... attempted it numerous times, after trying the various suggested "fixes", and each time at around 255 MB, the download quits, with the error that file cannot be read from the server.
The various proposed solutions I've found on the web -- resetting the user configured options connected to downloads in FF config (about:config); deleting the compreg.dat file in the FF profile folder, don't pause the download (never have done this) etc.
Others have opined that the problem is flaky intermittent WiFi, or Security/Anti Virus software interfering with FF's accessibility to the file during the download; or a caching problem at one's ISP -- HOWEVER Safari doesn't experience this problem at all. Each time that I've experienced it in FF, I launch Safari, and can download the file completely without any errors.
Would really like to see someone from Mozilla respond to this ... lots of us are experiencing it.
Whatever happened to Netscape's ability to recover from download interruptions and resume a download at the point where it had been interrupted (like when a dial up modem dropped the line in the middle of the download) -- sure would be useful to see that feature come back in FF.
Thanks,
Muiz

The song...could not be used because the original file could not be located

I just used Garageband this past Sunday, no problem...I open it up tonight and I get this message:
"The song...could not be used because the original file could not be located."
I click the OK button and it comes up with another song title, and I have clicked it 20 or 30 times already and it keeps coming up and I can't access anything else and it is frustrating!
Anyone know how to stop the madness?!
iMac 2.7 GHz Intel Core i5, 8 GB RAM, 1 TB HD, OS X 10.9.3
Garageband 10.0.2

"The song...could not be used because the original file could not be located."
GarageBAnd cannot find the recorded media or imported audio files, that should be in the Media folder inside your project.
Crtl-click the GarageBand icon in the Dock and use Force-quit to quit your current project.
Then ctrl-click the .band file of your current project and select "Show package contents." open the Media folder inside and check if all recorded media and imported audio files are there and you can play them.
Have you moved your project or has it been transferred by mail?
If the media are missing or do not play, there is not much you can do. If all media are there, repair the permissions of the project. If it is on an external drive, move it to your system drive and try there.
If you cannot rescue the project, copy the media file out of the project, so you can use the recordings to recreate the song.You can launch GarageBand into the file "recent songs" panel to create a new project or to pick a recent project, by holding down the alt/options key while double-clicking the GarageBand icon.

10g Admin/Desktop error :could not locate or parse the .dbc file error

Hi there,
can any one help me how to fix this error i get this while connecting to Discoverer Admin/Desktop edition 10g ver 10.1.2
Unable to connect to: username@crp2
Failed to connect to database - could not locate or parse the .dbc file
c:\oracle\BIToolsHome_1\discoverer\secure\us-oracle3.dbc corresponding to the given Oracle Applications instance
i had created the system environment variable FND_SECURE and i've placed the .dbc files in the folder (C:\oracle\BIToolsHome_1\discoverer\secure)
but, i still get error
Thanks,
Max

Hi Russ
Here's some additional info from my own library:
1. Set or check the following registry settings on your Admin PC:
HKEY_CURRENT_USER\Software\Oracle\Discoverer 10\Database\EnableTriggers should be DWORD with a value of 1
HKEY_CURRENT_USER\Software\Oracle\Discoverer 10\Database\DefaultPreserveDisplayPropertyForRefresh should be a DWORD with a value of 1
2. You need to create for yourself a folder called SECURE under your ORACLE folder:
e.g. mkdir c:\oracle\secure
3. Copy the DBC File from the E-Business Suite database and place it in the secure directory. It will be located in the TOP directory in the database.
4. Create a Windows System Variable FND_SECURE with the value as in step 2 above: e.g. c:\oracle\secure
5. Update your %ORACLE_HOME%/network/admin/tnsnames.ora to include an entry for the E-Business Suite database. The database name must match the two_task entry in the dbc file.
6. You may have to rename the dbc file so that it matches the name by which you are referring to that database in your TNS Names file
Does this help?
Best wishes
Michael

Import Wizard fails to export - object could not be written in the ids-file

Similar Messages

Maybe you are looking for