Importing data error: SIGNEDDATA conversion error

The complete description is:
The number of failing rows exceeds the maximum specified. (Microsoft Data Transformation Services (DTS) Data Pump (8004202c): TransformCopy 'DTSTransformation__13' conversion error: General conversion failure on column pair 1 (source column 'SIGNEDDATA' (DBTYPE_STR), destination column 'SIGNEDDATA' (DBTYPE_NUMERIC)).)
We are trying to convert a value that come with miles separators, use the character "." (point) as separator and "," (comma) as decimal separator, we use a vb function (replace) to change the points for null string, but it doesn't work. Do you have any suggestion to solve this?
We are using BPC 7.0 MS SP3.
Thanks in advance,
Mariana Rodriguez.
Edited by: Mariana Rodriguez on Mar 23, 2011 4:15 PM

Hi Mariana,
I've had the same kind of problem, which gave me the
General conversion failure on column pair 1 (source column 'SIGNEDDATA' (DBTYPE_STR), destination column 'SIGNEDDATA' (DBTYPE_NUMERIC)).)
errror message
My issue was resolved by changing the CREDITNEGATIVE=NO option to CREDITNEGATIVE=YES, because BPC probably converted negative values as 'string' values in stead of 'numeric' when importing SAP FI data with the minus sign '-' at the end (100-) instead of SQL signeddata (-100)
But I have to be carefull, my Account Dimension setup is as follows:
Balance Sheet Asset => AccType=AST
Balance Sheet Liabilities => AccType=LEQ
Profit and Loss Revenues => AccType =INC
Profit and Loss Expenses => AccType=INC
My flat file seperator is a comma (,) and decimalpoint is a point (.)
We are using BPC 7.5 MS SP07 Patch 02 and I'm not using any VBA to convert the amount.
Maybe it can help?
Regards,
Peter van Drunen - FPM Solutions

Similar Messages

Import data - errors: IMP-00017, IMP-00003, ORA-04052, ORA-00604, ORA-12154

When I try to import data from dmp file to my database I found errors whitch repeat all time..
First console show me:
IMP-00017: following statement failed with ORACLE error 4052
then show all procedure in which there are errors. After procedure I've got:
IMP-00003: ORACLE error 4052 encountered
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve service name
IMP-00017: following statement failed with ORACLE error 4043:
"ALTER PROCEDURE "CHECK_TIMESTAMP" COMPILE TIMESTAMP '2006-09-18:14:45:"
"05'"
IMP-00003: ORACLE error 4043 encountered
ORA-04043: object CHECK_TIMESTAMP does not exist
and after that the same errors for another procedures :( What can I do??

ORA-04052: error occurred when looking up remote
object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve service name
and after that the same errors for another procedures
:( What can I do??Fix the tnsnames.ora i.e. name resolution problem (lookup the description for ora-12154).

Maxl Import Data Error

I am getting the following error when i try to do import of Data into Database using MAXL.Can you please let me know what i am doing wrong.I am trying to incorporate this into a script.
MAXL> import database 'HQFPA'.'HQFPA' data from local text data_file 'E:\\Hyperion\\AnalyticServices\\app\\HQFPA_Level0.txt';
ERROR - 1242020 - (1) Syntax error near end of statement.
importing Databases for HQFPA.HQSLP
MAXL> import database 'HQFPA'.'HQSLP' data from local text data_file 'E:\\Hyperion\\AnalyticServices\\app\\HQSLP_Level0.txt';
ERROR - 1242020 - (1) Syntax error near end of statement.
Any help would be greatly appreciated.
Thanks,
Chandra

Chandra,
There's nothing that I can see wrong with your syntax. For giggles, I wrote an import statement against sample basic on my laptop (no load rule, just like yours) and stuck it into a three line MaxL script (login, import, exit):
import database 'sample'.'basic' data from local data_file 'c:\\hyperion\\essbase\\app\\sample\\basic\\calcdat.txt' on error abort ;
It works.
BTW, this also works:
import database sample.basic data from local data_file 'c:\hyperion\essbase\app\sample\basic\calcdat.txt' on error abort ;
Isn't MaxL neat? :)
Are you sure that your pathing is correct?
Regards,
Cameron Lackpour
Edited by: CL on Dec 5, 2008 12:47 PM
BTW, that first import statement has a double backslash between basic and calcdat but it doesn't show up after it's posted yet it is there when I edited it. It must be something to do with the way it gets wrapped in my browser.
Edited by: CL on Dec 5, 2008 12:51 PM
This also works (added text property to data_file):
import database sample.basic data from local text data_file 'c:\hyperion\essbase\app\sample\basic\calcdat.txt' on error abort ;

ImPort Data -Error

HI,
Getting below error when i try to import transaction data(Data manager package). I am getting same error even when i try to send data using Input schedules. Any idea whats triggering below error.Thank you in advance
     Application     :     SalesR
     Status          :     Failed
     Submitted Count     :     1
     Accepted Count     :     0
     Rejected Count     :     0
          - Error Message -
Cannot perform write (NOT_TRANSACTIONAL)
          - Rejected record list -
Error converting records: The root element is missing.

This is very strange. If you cube is in Load (not Planning) mode than each request should turn Green or Red upon completion. If somebody changed mode from Planning to Load than last request should turn from Yellow to Green.
Is that APO... request the top request in your cube? Can you please check one setting of that cube? If you go to change mode of that cube and open Environment menu you'll see InfoProvider Properties, select Display and than select Roll Up tab. Can you tell if there is a check mark on 'Set Quality Status to OK automatically'? This property must be checked for BPC to function properly.
What Nilajan suggested will most probably help you this time, but you have to find out who's changing your cube to prevent this from happening in the future.
Regards,
Gersh

Power Query import data error

Hi all,
As Power Query does not support ODBC I tried direct connect to DB via menu
From Database/From MySQL Database.
I passed authorization and my query was being running.
But after all records were downloaded I just got error
'SELECT command denied to user '****'@'x.x.x.x' for table 'bogus_table' and
as result PQ query was failed.
What's interesting is that my original query was 'SELECT id FROM b_user'.
I do NOT query any 'bogus_table'.
What does all that mean?
-- Paul

This appears to be a bug in the MySQL ADO.NET driver. Under some circumstances, when you close the DbDataReader, the MySQL driver will attempt to run the query “SELECT * FROM bogus_table LIMIT 0”. It attempts to trap the error by checking for error number
1146 (table not found), but in this case it’s getting a different exception – probably error number 1142 (select permission denied).
You should
1) Report the bug to MySQL.
2) Delete the table named bogus_table, if it’s not actually needed.
3) Consider renaming the table named bogus_table if it is needed, or granting select permission to all users.
We're sorry you had to run into this, but even if we could mitigate this MySQL bug in Power Query code, it would take nearly two months for you to get the updated version. Fixing the local data is likely the best approach.

Error while importing data from 8i to 9i

Hello !
I have installed 9i and now want to import data from previous database 8i which contains GB's of data.
I have exported through transporatble tablespaces but while importing to 9i i receive the following error of national character set .
Import done in WE8MSWIN1252 character set and WE8ISO8859P1 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
export client uses US7ASCII character set (possible charset conversion)
export server uses US7ASCII NCHAR character set (possible ncharset conversion)
IMP-00003: ORACLE error 2248 encountered
ORA-02248: invalid option for ALTER SESSION
IMP-00000: Import terminated unsuccessfully
Can any one fix this problem
Regards
Shimak

If you're moving data from 10G to 9i, using EXP/IMP, I would try using the 9i EXP to create the dumpfile with data from the 10G database, and then using the 9i IMP to import that dumpfile into the 9i database.
Sounds like you have been using the 10G EXP and IMP in both cases.

Error occured when importing data from dmp

Hello friends
when i am importing data from dmp file
the following error occured
Please help me to solve this
Error message :
Export file created by EXPORT:V09.02.00 via conventional path
import done in WE8PC850 character set and AL16UTF16 NCHAR character set
export client uses US7ASCII character set (possible charset conversion)
Import terminated successfully without warnings.

This is not really an error message but a information about possible character conversion from US7ASCII to WE8PC850 which should NOT be an issue since all US7ASCII characters are in most WExxx character sets.
Message was edited by:
Pierre Forstmann

Object reference not set to an instance of an object error with Import data

Hi Experts,
We are using BPC 7.5M with SQL Server 2008 in Multiserver environment, I am getting an error "Object reference not set to an instance of an object." while running Import data package, earlier we use to get this error sometime(once in a month) but it goes away if we reboot the application server but this time I have rebotted the Application server multiple times but still getting the same error.
Please Advice.
Thanks & Regards,
Rohit

Hi Rohit,
please see the sap note 1615837, maybe this help you.
Best regards
Roberto Vidotti

Error when running import data package, BPC 7.5 Microsoft

When I try to import data to one of my applications the import fails. This happens with external data but also with data I extracted from the application (input via schedule and then exported) I get the below error:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
TOTAL STEPS 2
1. Convert Data:         completed in 0 sec.
2. Load and Process:     Failed in 1 sec.
3. Import:               completed in 1 sec.
[Selection]
FILE=\GRP_CONSOL\ZHYP_DATA\DataManager\DataFiles
2011_test_schedule.txt
TRANSFORMATION=\GRP_CONSOL\ZHYP_DATA\DATAMANAGER\TRANSFORMATIONFILES\SYSTEM FILES\IMPORT.XLS
CLEARDATA= Yes
RUNLOGIC= Yes
CHECKLCK= Yes
[Messages]
Convert Data
Success
Record Count : 12
Accept Count : 12
Reject Count : 0
Skip Count   : 0
Incorrect syntax near '.'.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
What can cause this error?
Marco

Hi Marco,
See note [https://service.sap.com/sap/support/notes/1328907].
This is issue is related to the Replace and Clear option and not having Work Status set up correctly.
When using the option 'Replace & Clear' with Import packages, the WorkStatus Setting should be not only enabled but also 3 dimensions types 'C' (i.e. Category), 'E' (i.e. Entity) and 'T' (i.e. Time) should be set by 'Yes' or 'Owner'.
Thanks,
John

Error while Importing Data in UDO.

Hello,
I had created one User defined table with Master Datatype.
I register this Table and creating Master type of UDO.
I created template for this UDO throgh DTW.
I am using Following Filed in the template.
Code, Name, Field 1 and Field 2.
While i am importing data using this template through DTW using, i got following error.
Master Data Type user Table can not add row65171.
Regards,
Arpit Shah

Dear,
Please see the Note 804685 for information about how to
import data into user defined tables linked to an object type.
It is not possible to import data into UDO tables via the DTW.
Regards
Apple

Error while importing data from XML file to a Oracle database

I am getting the following error while importing data
*** atg.xml.XMLFileException: No XML files were found for "/Dynamusic/config/dynamusic/songs-data.xml".
The files must be located under the name "/Dynamusic/config/dyna
*** java.io.FileNotFoundException: D:\MyApp\ATG\ATG10.0.3 (Access is denied)
java.io.FileNotFoundException: D:\MyApp\ATG\ATG10.0.3 (Access is denied)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:120)
        at atg.adapter.gsa.xml.TemplateParser.importFiles(TemplateParser.java:6675)
        at atg.adapter.gsa.xml.TemplateParser.runParser(TemplateParser.java:5795)
        at atg.adapter.gsa.xml.TemplateParser.main(TemplateParser.java:5241)
I have placed the FakeXADataSource and JTDataSource properties files as required. In fact I have been able to import data in all machines. Just this one machine is giving problems. I have also checked out the access rights. Can someone help me please?

Confirm that you have access to D:\MyApp\ATG\ATG10.0.3 and existence of Dynamusic/config/dynamusic/songs-data.xm

Logon Error while importing data

Hello,
I have "Countries" flat table in my repository containing 2 fields Name & ISO Code.
I wanted to import data i.e. Name & ISO Code in this flat table via Import Manager.
I have excel file containing Name & ISO Code data.
While importing data, I am getting an error:- "Logon Error: External table is not in the expected format."
Would anybody know about this issue?
Regards,
Vikas

Hi Vikas,
Just check whether yr file .xls or .xlsx.
If xlsx then change it to xls and check if problem is solved .
If not try with disable macros.
Please revert with yr results.
Thanks,
sudhanshu

Error message when importing data using Import and export wizard

Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126

Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error in import data

in oracle enterprise console(login to the Oracle Management Server), when I use the wizard to import data, there is error in reading the import file(I use csv file).
the error msg is:
VNI-2015: The Node preferred credentials for the target node are either invalid or do not have sufficient privileges to complete the operation.
On Windows platforms, the Node credentials specified for the Windows target should have the "Logon as a batch job" privilege.
I don't know where to set the "Logon as a batch job", I only see the "Preferred Credentials" Tab in the menu of Configuration\preferences.
anybody can help me? thanks in advance

Hi
What you can do is to check that the OS user submitting the job through OEM console is a local user on the database server and not a domain user. If the user is a domain user then your job submission will fail with VNI-2015 Authentication Failure. I have encountered this situation many times because of the same reason: the credentials for the node user were wrong.
When adding local user on the database server - it has to be nodename\username and not domain_name\username. Assign log on as batch job and Administrator rights to the local user. This should fix the problem. May be you can check file permissions for the backup directories too
Hope this helps
Thank You

MAXL Import data statement error

Can someone assist me in the maxl import data statement.
In the import data statement "import database App.DB data from data_file "\\servername\\folder1\\folder1\\data.txt";
The error I get is trying to specify the syntax for the path of the server. Does someone have an example of the import statement syntax that is referencing the data file from a server?
Thanks

Have you tried something like :-
import database App.Db data from text data_file "\\\\servername\\sharename\\directory\\datafile.txt" using server rules_file "dataload" on error write to "dataerrors.err";
Cheers
John
http://john-goodwin.blogspot.com/

Importing data error: SIGNEDDATA conversion error

Similar Messages

Maybe you are looking for