Importing element definition from an  EDD into a template - does not work

FM 10.0.1 German on Windows XP SP3.
When importing the element definitions from an existing EDD into an existing template, FrameMaker converts the template into a  new EDD.
So the element definitions which are correctly defined do not appear in the template.
The highest level element is than ElementCatalog in the template and not the higherst lvel element defined in the EDD.
In FM9 this was no issue.
Any help is appreciated, I have a deadline and must do some changes in the EDD.
Best Regards
Thomas

Lynne,
EDD is english (Version FM7.0), Interface language is German.
Maybe it´s a localization issue.
I have attached a captivate demo pdf so you can see what happens and the
defective EDD.
Mit freundlichen Grüßen
Best Regards
Thomas Zeisig
From:   Lynne Price <[email protected]>
To:     "Th. Zeisig" <[email protected]>
Date:   13.10.2011 14:12
Subject:        Importing element definition from
an  EDD into a template - does not work
Re: Importing element definition from an EDD into a template - does not
work
created by Lynne Price in FrameMaker Structured - View the full discussion
Thomas,
  No question the behavior you describe is a bug. However, I am unable to
duplicate it. I created an EDD with two element definitions:
Element (Container): doc
  Valid as the highest-level element.
  General rule:  (
  When I imported element definitions from this EDD into a new portrait
document, FM reports that element a is referenced but not defined and that
b is defined but not referenced. However, with all elements listed, the
element catalog shows a, b, and doc. The metatemplate elements are not
available.
  I wonder if this is a language-dependent problem. Is your EDD German or
English? What about your user interface?
  Can you send me a short EDD that fails as you've described?
  Thanks,
      --Lynne
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969067#3969067]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969067#3969067]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in FrameMaker Structured by email or at Adobe
Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

  • I bought this ipod 4 from a friend the lock button does not work and he doesnt know the password? how do i reset and i cant use my computer????   HELP!!!!!!

    i bought this ipod 4 from a friend the lock button does not work and he doesnt know the password? how do i reset and i cant use my computer????
    HELP!!!!!!

    Place the iOS device in recovery mode usning this program and then then restore via iTunes. The iPod will be erased.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    For how to restore:
    iTunes: Restoring iOS software

  • I just bought an Iphone4 from straight talk and my camera does not work. The shutter wont open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile and now that I have it, it does not work properly. Need help

    I just bought an Iphone 4 from straight talk. My camera does not work. The shutter does not open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile. I want the issue fixed.
                                                                                                                                                     Thanks

    Take the iPhone to an Apple store genius bar for testing, and if it is defective and under warranty they will replace.  Since you say iPhone 4, was this a used or refurbished iPhone? 

  • I downloaded iSpeakit from the app store. It does not work. How do I get my money back?

    I downloaded iSpeakit from the app store. It does not work. How do I get my money back?

    First, contact the developer for support and suggestions. If they cannot or will not help, go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • Why while in Bridge Load Files into photoshop Layers does not work?

    In Bridge, Tools>Photoshop>Load Files into Photoshop Layers does not work.  I have two images selected and when I execute that comman in Bridge nothing happens.  I exited and restarted both PS and Bridge and still nothing.  I am working in Windows 7 and Photoshop cs6.

    No I tried File/scripts/load file into stack and still did not work.
    There was an update to bridge and now it works.  Thanks so much.

  • In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)

    In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

    I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

    Well the error message is in Swedish but says: The installation program database is damaged. Please contact the Adobe support (which is a hard thing to do!!). I use Windows 7 Home Premium with service pack 1.
    Från: Mylenium 
    Skickat: den 29 december 2014 16:48
    Till: Tony Bohman
    Ämne:  I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
    I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
    created by Mylenium <https://forums.adobe.com/people/Mylenium>  in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7050595#7050595>

  • My adobe reader does not read my pdf files, I think it was screwed up by the other "PDF-READER". I deleted the other "PDF-READER" from my pc, but it still does not work.

    my adobe reader does not read my pdf filI think it was screwed up by the other "PDF-READER". I deleted the other "PDF-READER" from my pc, but it still does not work.

    Hi wellsfar,
    Which version of Adobe Reader you are using?
    Is it showing any error message?
    A screenshot of the error would be more helpful.
    Regards,
    Florence

  • After sending sound from find my iphone, now ipad does not work

    after sending sound from find my iphone, now ipad does not work
    it can't be unlock and scrren is blank, only siri works

    Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go.

  • After a restore from Time Machine my login password does not work.

    My HD crashed and I replaced the HD.  I then restored from Time Machine.  After it was done restoring it prompted me for my apple ID and password and account info.  Now when I try to login, the password does not work.  After several failed passwords, it says I can reset my password using my apple ID.  How do you do this?  I click on the message and it just disappears.  I can't login!

    Is it your actual Apple ID login password that you're talking about (which is obviously working since you got into this forum) or the password for your user account. If the latter, simply boot to your ML Recovery partition (holding down the Command and R keys while booting) and set a new password via Terminal.
    Boot into your Recovery partition and, from the Utilities menu, open Terminal. In Terminal, type in:
    resetpassword
    ...a small app will run allowing you to select a user and change the password for that use. Enter the new password twice (the second time to verify) and give yourself a password 'hint'. Then reboot and use your new password on your account.
    Clinton

  • I want to have all my tabs return after closing. In Tools/Options/General/ I have' Show my Windows and Tabs from last time' checked, but it does not work. When I open FF again none of my formerly open Tabs show... FF v.4.

    When I open FF up again after I have closed it, I want all tabs to return. In Tools/Options/General/ I have' Show my Windows and Tabs from last time' checked-does not work. In addition, the feedback window fails to 'Submit...!'

    Some things to check:
    #'''Browsing history must be saved'''
    #*Firefox button: Firefox button > Options > Options > Privacy > [X] Remember my browsing history
    #*Menu Bar: Tools > Options > Privacy > [X] Remember my browsing history
    #'''Also make sure you do not clear "Browsing History" when using Clear Recent History or when closing Firefox'''
    #*Using Clear Recent History
    #**Firefox button: Firefox button > History >Clear Recent History
    #**Menu Bar: Tools > Clear Recent History
    #*When closing Firefox
    #**Firefox button: Firefox button > Options > Options > Privacy (checked) > Settings
    #**Menu Bar: Tools > Options > Privacy (checked) > Settings
    #**See: https://support.mozilla.com/en-US/kb/Clear%20Recent%20History
    #'''Make sure you are not in Private Browsing mode''' or '''in permanent Private Browsing mode''':
    #*See: https://support.mozilla.com/en-US/kb/Private%20Browsing
    #'''If you have the'''Tab Mix Plus'''extension''', then disable the built-in session restore.

  • File Attributes from App Server by RFC (GET_FILE_ATTRIBUTES does not work )

    Hello,
    We have an Objects application that is started through an RFC BAPI call from a Java app. The Java app. passes a file to the BAPI. We want to test, as efficiently as possible, if the file is 0 bytes long. We have tried /epsf/get_file_attributes but there is a problem with it being called remotely. We have Remote Enabled the function module. Local tests work fine (GUI User), but when it is called by the Bapi(Technical User) we receive sy-subrc = 2. I think it is referring to a 'Communication Error'.
    I found a nice class, CL_GUI_FRONTEND_SERVICES for the workstation server, but nothing comparable for the application server.
    Help is greatly appreciated as I am pulling my hair out.
    Best Regards,
    Mark Lengel

    Hello Andreas,
    The GET_FILE_ATTRIBUTES fm is also from the EPS Function Group and provides the file size, it just does not work when called from Rfc/Bapi. Won't the GET_DIRECTORY_LISTING fm just return directory info ?
    I am afraid I will have to resort to the OPEN, READ, CLOSE DATASET steps in order to check for a zero length file.
    Regards,
    Mark

  • BLOB download from report region in translated application does not work

    We created an application (APEX 3.1.2) with a base language dutch (300) and a translated application en-uk (3001). The problem is that in the translated application downloading BLOB's from a report region does not work and results in an error (page cannot be found).
    The query source for the region is:
    select naam
    , dbms_lob.getlength(bestand)
    , mimetype
    from bos_documentatie
    The column 'dbms_lob.getlength(filename)' is defined as a 'BLOB Download Format Mask' with the following setting:
    DOWNLOAD:BOS_DOCUMENTATIE:BESTAND:NAAM::MIMETYPE:FILENAME:::attachment:Open
    The URL's to the BLOB documents are different between the dutch and en-uk application:
    dutch:
    http://nldvnr01ux002:7792/pls/xvapexd/apex_util.get_blob?s=4260101889649158&a=300&c=12455124581749125&p=1001&k1=Application Multi Language.doc&k2=&ck=A24A5EA6903C5A9603B86D30F128F4DE&rt=CR
    en-uk:
    http://nldvnr01ux002:7792/pls/xvapexd/apex_util.get_blob?s=4260101889649158&a=300&c=12455124581749125.3001&p=1001&k1=Application Multi Language.doc&k2=&ck=7FF0C64FDD48A4D7A6892CFB2B6BCA57&rt=CR
    As you can see the c parameter for the en-uk version has a '.3001' at the end, the internal ID of the translated application. I don't know if this can be the cause of the problem?

    Hi Peter,
    Thanks for the suggestion. However we have a lot of APEX applications build in that same APEX version (one development database) and upgrading now to a higher APEX version would mean we would have to re-test all our applications and upgrade all our test and production environments, just for this bug. And, maybe the higher APEX version may not solve our problem.
    Thanks and regards,
    Patrick

  • TS2972 WHY IS MY HOME SHARING SHUT DOWN AFTER 5 MIN WHEN WATCHING A MOVIE. I DOWNLOADED LATEST VERSION FROM THE APPLE SITE. STILL DOES NOT WORK.

    home sharing shuts down after 5 min when watching a movie. any solutions. already downloaded itunes from apple. did not work.

    Make sure your computer is not set to fall asleep. Also check www.istumbler.net (netstumbler for windows) for interference on the network

  • Attempted to upgrade to Mavericks from Lion 10.7.5 and does not work, what gives?

    Attempted to upgrade to Mavericks from Lion 10.7.5, but whenever I attempt the upgrade the Apple prompt replies 'cannot complete'. I may be mistaken, but I think my Mac Pro is qualified (MacPro 1.1, Dual-Core Xenon @2.66 GHz, 6 GB DRAM). What gives?

    The MacPro 1,1 does not support Mavericks. It has to be a 2008 model or later:
    http://support.apple.com/kb/ht5842

Maybe you are looking for

  • Creation of Trasport request for the Deletion of Infoset from Dev

    Hi   i want to create a trasport request for the deletion of infosets from dev system and want to trasport request in to production. i wish to know while right clicking the info set and selecting deletion will it prompt for trasport request. could an

  • Hard disk not recognised - will not boot from cd & No FW Target Disk mode

    hi, some help would be greatly appreciated. Some time ago i was switching internal hard drives around and wound up with a kernel panic of some sort (see my previous posts). following on from this I have tried FW target disk mode with no success, and

  • Synergy on Solaris 10 X86

    I've installed Synergyc (client side app) on my Solaris 10 X86 box. My server is an XP machine. Synergy works great but I'm unable to get in configured for autostart on my Solaris box. I've ran through all the documentation I can find on how to do it

  • Space At Bottom of GridLayout

    I have a JPanel set to GridLayout to which I have added 26 JButton objects in 2 columns and 13 rows. The GridLayout containing the 26 JButtons was placed at BorderLayout.WEST. When the program is instantiated there is a horizontal space at the bottom

  • DLSW ER+ at the central site

    The network topology that I have is two MSFCs and two external routers at central site and two MSFCs and two external routers at the remote site. DLSW is activated on the external routers. In regards to DLSW+ ER at the central site, only one translat