Importing into flash builder

I have two questions:
1) If I forgot or just learned about the making a seperate library for all my componets in FC - when I import the FC project into FB can I take the componets section and some how -safley move it to a lib project? - while maintaining compatability with FC?
2) if the above cannot be done - when I create a blank lib proj, export it and import it into fc - why are none of the componets showing up in the Lib componets section? they all show up still in the main projects componets section

Which version of Flash Catalyst are you using?
Chris

Similar Messages

Mobile App prototyping for import into Flash Builder 4

I'm a bit stuck.. I would like to create the graphics for a mobile app in something other than Flash builder. I tried Catalyst, but it won't import as a mobile project.. and now I'm trying Fireworks, but it will only export as an FXG file and I can't seem to import that into flashbuilder..
so what to do??
What can I use to quickly sketch something out and then attach the actionscript for a mobile app in Flash Builder..
Thanks
Todd

With Flex Builder 3 I used to import Web services directly from my file system, is that possible any more?
Thanks,
Philip

Import a video player made in flash cs4 into flash builder 4

I want to import a video player made in flash cs4 into flash builder 4. Are there any pitfalls that i should be aware of?

pdf is not a supported file type in flash.

Trouble Import Flash Builder 4 project into Flash Builder 4.5

Hi,
I have quite a lot of Flash Builder 4 Air project which I would like to convert all of them into Flash Builder 4.5 project. However, after I tried to import it into 4.5, the project got error and saying that "application descriptor not found".
I am posting it here because I believe it is due to improper import of the air project into 4.5. Flash Builder 4.5 should be intelligent enough to solve the problem when converting the project. Hope there will be a fix for it soon
Btw, how can I manually solve this problem so that I can get all my previous projects run on 4.5? Thanks.

Hi Yue,
I'm sorry you're running into problems with Flash Builder. Would you mind reposting this over on the Flash Builder forums? You'll probably have better luck over there.
Thanks,
Chris

How to easily get an Adobe Flash CS5.5 Professional project into Flash Builder 4.5?

Hey all,
I am new and trying to do the following, can you please guide/help me do it:
I have a video chat application that is done on Adobe Flash CS5.5. I had the problem of "echo" so I wanted to use "getEnhancedMicrophone()". When I replaced "getMicrophone()" with "getEnhancedMicrophone()", Adobe Flash CS5.5 Professional didn't recognize it. I knew I need Flex, so I installed Flash Builder. And then got lost. What I simply want is just import my "FLA" file (or if I need to convert it to something else using a specific tool, let me know.. I have Adobe Flash CS5.5 Professional and can install other required applications if needed) done on Adobe CS5.5, into Flash Builder, and then "support Flex" so that I compile with the flash-version argument required.
I am totally new to MXML and Flash Builder, and even Flex. I don't know how to import a FLA and add "Flex" libraries into it simply to make "getEnhancedMicrophone()" work without the need to recreate the whole thing on Flash Builder. Can you guide me please? The output is for a web SWF file, not a desktop application.
Thanks!

I have the same problem here. I'm trying to do a stick animation on cs6, but to be more precise, i need to actually draw with a larger brush size. I suggest using the pen tool with the smooth option on. You can't see exactly where the stroke will be, but its better than nothing, and it more or less acts like the brush anyway.

Loading purchased swf into Flash Builder 4 Flex app

I have purchased a Flash "fundraising thermometer" from an online Flash components site. It takes input from an xml file and displays a thermometer with the goal at the top and the current amount raised indicated. It came with the following files:
thermometer.swf
thermometer01.fla
thermometer01.html (A sample that works.)
xml/thermometer.xml (The source file: goal amount, current amount, mark interval, etc.)
caurina/transitions (Mostly .as files.)
Since the test html (thermometer01.html) works fine, I thought this would be a no-brainer.
I first unzipped the files into a "thermometer" folder in my current project. I then went into Flash Builder and created a SWFLoader object as follows:
<mx:SWFLoader
id="myLoader" source="../thermometer/thermometer.swf" complete="initThermometer();" autoLoad="true" scaleContent="false"/>\
private function initThermometer():void {
     Alert.show('Thermometer loaded');
The Design view looks fine. I can see the thermometer default image (see below).
When I run the app, I get no errors, just a broken image link in a box (see below). The alert box also never shows up.
I'm new to Flex, so I may be doing something stupid that keeps this from working. I contacted the author of the thermometer widget but he doesn't know anything about Flex.
Any help figuring out how to get this to work in a flex app would be appreciated.

You should probably add more event handlers to see what's going on. Especially "ioError". The complete list is below. For coverage, add a handler for each event. You can also use in MXML
     complete="initThermometer(event)
and add an argument to your Actionscript method, to find out details about the event.
private function initThermometer(event:Event):void {
     Alert.show('Thermometer loaded ' + event.type);}
Events
    complete="No default"
    httpStatus="No default"
    init="No default"
    ioError="No default"
    open="No default"
    progress="No default"
    securityError="No default"
    unload="No default
General info here:
     http://livedocs.adobe.com/flex/3/langref/mx/controls/SWFLoader.html
I did not test my code suggestions, but it's probably close.

Help needed with Illustrator texture swatches imported into Flash

Hey, so I basically scanned a texture into illustrator and added it into the swatches. After drawing a character in illustrator I used the colour of the swatch I had added to colour in my character and by using the tilde button I could move the texture to see which speicifc part of the texture I wanted for certain parts.
Once I completed my character I imported him into Flash. Here is where the problem lies in, when I attempt to use the bone tool to animate him, as soon as I move a certain limb, the specific texture I had applied for that certain area causes the texture to move and make the area that I had coloured in using the swatches look different to what I initially imported into Flash.
This has been a huge problem I have been facing and haven't been able to find an answer anywhere, I would really appreciate if I could get some help with this. Thank you very much!
P.S. If i explained my situation poorly, just ask for an image and I will gladly post a few so everything's clearer and makes more sense.

Bump

Maintaining original video size when importing into Flash

Hi All,
We've imported a number of videos for a client in order to
stream them via Flash. The problem we are experiencing though is
that flash seems to stretch the video height. For example, here is
the video on Youtube:
http://www.youtube.com/watch?v=q7EWMzIXQg8
which is fine
and here is the video imported into flash:
http://www.geofframm.com/movie/frommetoyou.html
We've tried adjusting the height/width settings, but to no
avail.
Any help greatly appreciated.
Best wishes
Dave

I am using captivate 3 and I get an error whenever I try to
export to flash cs3. unknown error.
why the hell doesnt Adobe say that flash is required to
export to flash BEFORE I buy the software? I am using my pc for
captivate, but am primarily mac based and was going to edit in
flash on my mac. but captivate didnt allow for me to export to
flash at all without any kind of flash installed. I installed a
demo version of flash, but the export is coming up with an error.
any ideas out there? adobe??? I'm currently using vista OS.
thanks in advance. r

Captivate 3 is wrong size when importing into Flash CS3

I've tried exporting, publishing etc. and no matter how I
try, when I import into Flash CS3 the size of the Captivate content
(background screens, in particular) are too small. For example, I
captured a 423x424 area for my Captivate project. When I import
into a Flash CS3 project with the same dimensions the Captivate
content (screens) are more like 203x203.5 and the mouse path and
slide context starting positions are upper left corner. I've tried
adjusting some of the importing settings but can't get the screens
the right size unless I resize each one manually - and I have
around 100. Any help greatly appreciated!
-Scott

I am using captivate 3 and I get an error whenever I try to
export to flash cs3. unknown error.
why the hell doesnt Adobe say that flash is required to
export to flash BEFORE I buy the software? I am using my pc for
captivate, but am primarily mac based and was going to edit in
flash on my mac. but captivate didnt allow for me to export to
flash at all without any kind of flash installed. I installed a
demo version of flash, but the export is coming up with an error.
any ideas out there? adobe??? I'm currently using vista OS.
thanks in advance. r

Importing into Flash a Fireworks image - advice please!

Importing into Flash using a Fireworks image - advice please!
New'ish to Flash so hope I'm in the right forum ;-)
I have made and image using gradients in Fireworks and have been using FW for ages (please see example below).
I am importing into Flash CS4 this image and want to use it with a Flash component however the image quality is really bad in Flash and I cant figure out why. I have increased the image to 300dpi in Fireworks to see if that helps and it doesn't.
I'm hoping this is a simple thing I am missing due to not knowing Flash as well as I do Fireworks.
Really grateful for any advise. P.

Hi there,
No not trying to adjust size of the image in Flash, do that all before hand.
In Fireworks I can adjust resolution but don't seem to be able to in Flash, is this def the case?

Import WSDL into Flash Builder 4 (Flex 4)

Our Flex 3 applications use the File \ Import \ Web Services (WSDL) feature to import a WSDL directly into our source code.
With Flash Builder 4, how do we import a WSDL directly into our source code?
Thanks,
Bruce

With Flex Builder 3 I used to import Web services directly from my file system, is that possible any more?
Thanks,
Philip

New to flash. I import a flash professional project into flash builder but don't see a design mode

in flash builder to place object onto!!!
I can see design mode if I import a catalyst project, as well an mxml file, but not with flash professional. Any help?

in flash builder to place object onto!!!
I can see design mode if I import a catalyst project, as well an mxml file, but not with flash professional. Any help?

Installing Flex SDK into Flash Builder 4.7 problems

Hi,
Im completely new to Flash Builder, today I have installed Flash Builder 4.7 & Flash CS6 from Creative Cloud for my son to start to learn game programming (with my help), I have used simple coding in web design however this terminology is new to me.
I bought my son the latest 'Foundation Game Design with ActionScript 3.0' book on recommendation but it was written when FB was version 4.5 so im guessing this might be the problem.
The book is very easy to follow but have hit problems at the beginning of the tutorials, the book talks about Flex SDK but it seems that FB 4.7 uses AIR SDK ?
So the first project called HelloWorld, we got up to:
Got an exclamation mark which said
'The import flash.display.Sprite is not used
locally'
Continuing with the rest of the project the exclamation mark disappeared:
However on selecting run- Debug we got a blank Flash Player window ('generate HTML wrapper file' was deselected)
So either we've done something wrong, or the book and FB version are not compatible?
Any advice would be great!
Thank you
Latest ...
I thought that installing Flex SDK may solve the problem but after following instructions I have the error message, see image below. Really stumped now!

Sorry, if I went a little overboard. After re-reading your post, perhaps I should back up a little.
First, there are little things that Flash Builder (FB) will complain about. Having extra import statements in your code doesn't hurt anything. If I'm trying different solutions and then commenting out the code, the import statements will hang around, FB will complain, but just ignore it. If you see a little icon on the left edge of your code editor and its a red circle with an X in it, then that is something that will have to be fixed.
When you create an app in FB or Flash you can choose to create a web app which means it will run in a browser window. The project can optionally create an HTML wrapper, or web page that will load your app. In Flash Pro you can choose File->Publish Settings and there will be a checkbox on the left to publish a HTML wrapper. In FB, you can right click your project in the Package Explorer, select Properties at the bottom, select the ActionScript Compiler, and down at the bottom there will be a checkbox to create a HTML wrapper.
If you're just learning Flash Builder, then the FlexSDK 4.6 and the AIR SDK 3.1 that comes with it should be fine. You mentioned Apache SDK and I'd recently been working with that so I ended up getting side-tracked.
Getting an AIRSDK to work with when build ActionScript projects is easy. Just go to the adobe site, type AIR SDK in the search box, and you should find a page that will let you downloaded the latest version. There's also a page to let you download the latest AIR runtime, and if you were just going to run AIR apps and not build them, then that's all you would need. As a developer you'll want to install the runtime from the downloaded .exe file. With the SDK, after downloading it, installing it is easy. Just create a new folder an unzip the SDK into it, then place it somewhere easy to find. I put all my SDK's in their own directory right off the c: drive. So I have c:\AIRSDK_3.5.0.880 and c:\AIRSDK_3.7.0.1530. I use very descriptive folder names so I always know which SDK's I have to work from.
To use the SDK in Flash Pro select Help -> Manage AIR SDK, hit the plus button and add the folder you created. Now when you've opened a Flash project, you go to File->Publish Settings and select the combo box at the top, you'll see options like 'AIR 3.7.0.1530 for Android' in the list that reflect the SDK's you've added.
Generally with FB you'll be using a FlexSDK, or perhaps a FlexSDK overlaid with a newer version of AIRSDK. Overlaid basically means you copied the contents of the AIR SDK into the Flex Folder. The article I mentioned above will give you all the details on creating those. For instance, I downloaded the Apache Flex installer, installed it, then created an empty folder called c:\ApacheFlexSDK_4.9.1, launched the Apache installer, gave it the new empty folder I'd created, selected all the download options, and let it all download. If it launches a popup box or a security warning, you can allow it, and it will continue. Once you have the SDK and you want to use it with a project in FB, just right click the project, select Properties, selected that Compiler tab again, and up in the right corner you'll see 'Manage SDK's...'. Hit that link, add your new SDK to the list and give it a descriptive name, then selected the checkbox beside it to set it up as your default. If you do this, then all your projects set to use the default will automatically switch to it and rebuild. So if you want a project to stay with a specific SDK then select that option in your Compiler tab, and then you could use the combo box to select your new added SDK.
When I started with FB I think I spent the first 2 days going round and round with project settings and options until I got them all figured out.
When I develop, I usually have my browser open and I have bookmarks and favorites to let me quickly get to all the pages I use most often. Here are a few of them:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/index.html <---- The API reference. In the packages window check out 'Top Level' at the top and Language Elements near the bottom. I think I have this page open in one or more tabs almost every day.
http://www.adobe.com/devnet.html
http://www.adobe.com/devnet/actionscript/learning.html
http://help.adobe.com/en_US/as3/learn/index.html
http://helpx.adobe.com/flash.html
http://help.adobe.com/en_US/flashbuilder/using/index.html
Free videos to help you learn Flash Pro:
http://tv.adobe.com/show/learn-flash-professional-cs6-/
http://tv.adobe.com/show/learn-flash-professional-cs5/
And you've already found the forums! But if you don't find an answer here, many times you can find your question already answered on www.stackoverflow.com forums.
Ok, I think I went a little overboard again.

From flash develop into flash builder?

Recently, I'm trying to use flashbuilder as the editor to associate with augmented reality. I'm useing in2ar sdk to compile the ar function. In the official in2ar tutorial they used flash develop as a example. However, when I import the sdk to the flash builder and try to run the example, it just samplely not working. In the console window, it just show [SWF] with the path of Main.swf - 1.285 bytes after decompression. Anyone know what wrong with this? The sdk and example works perfect in flash develop.

Go to the Insert menu in DW and select swf. Find the .swf that you want to use and select it. Save the file and then use the Preview in Browser tool. Alternately, you can use the Publish function in the File menu in Flash to publish an html docuement that you can then open in DW.

Intergrating RSS Feeds into Flash Builder 4...

I am very new to Flash builder 4 and I want to make an application where the app user can read through all the RSS Feeds and get updates everytime their connected to the internet. I am making this for the BlackBerry Playbook if that makes a difference and also can it be really simple instructions like I said I'm very new to this.

Ok, I think you might have your message title worded wrong. I think you want RSS feeds in a FLEX application, not Flash Builder 4 itself??
I, myself, am trying to implement an RSS feed into my application but have other priorities unfortunately.
The only bookmark I find in my list is this:
http://insideria.com/2009/04/flex-101-consuming-a-simple-rs.html
^ That might help you get started. I cant find any other examples in my bookmarks, but if I do I'll post them here.
OR, if I get my own code up and working (which should be within the next week hopefully), I'll post that up too. Cheers!

Importing into flash builder

Similar Messages

Maybe you are looking for