Importing Map ID files

I am creating page-sensitive help for a web-based application
using RoboHelp HTML X5.0.2. The developers have provided me with a
.HH file with each map ID in the following format: #define
Add_Provider_Type_page dlgAddProviderType
I import the .HH into the RoboHelp project, but when I select
it in the Edit Map ID dialog box, the Map ID box is blank. Any idea
why? Is it necessary to have a numeric map #?
Thank you for your help.

The normal format is to have a numeric ID, something like:
#define ID_WHATEVER 111222. I just tried putting other text in
place of the numbers and RoboHelp didn't like it - even text that
had been defined as numbers earlier in the .hh file. Anything
without a numeric value was not seen in the dialog.
I do use an old version of RoboHelp. So your results may
vary.
John

Similar Messages

  • How do I import Map Info Tab files into Spatial for a map of europe?

    How do I import Map Info Tab files into Spatial for a map of europe via FME and have oracle spatial draw the map without problems?
    So far I've got to the stage where I can import the data, spatially index it (in oracle 9i) and get my SVG (scaleable vector graphics) application to view the map.
    The problem is that countries that have more than one polygon (more than one row in the database) do not draw properly.
    When I view the Map Info tab file in the FME viewer I can see that the data is fine, but I can also see that some of the polygons used to draw a country are donugts and some aren't.
    This seems to cause a problem when I import the data into oracle spatial as I don't know if a row in the table needs to be inserted as an independent SDO_GEOMETRY or if it should form part of a larger SDO_GEOMETRY (as in 2 or more rows make up the polygon shape for a country).
    I have a feeling that I'm not using FME correctly, because at the moment I have to import the tab file into Oracle then re-insert the data into a spatially formatted table (one with a spatial index) - I get the impression that FME should do that for me but as I'm new to this I don't really know.
    Any Help welcome :|
    Tim

    Tim,
    MapInfo has a free utility called EasyLoader that allows you to upload a table directly to Oracle. EasyLoader creates the geometries and spatial index. You can download it free from http://www.mapinfo.com/products/download.cfm?ProductID=1044
    Andy Greis
    CompuTech Inc.

  • Error during import of XSD file in message mapping

    When i try to import an XSD file from desktop during message mapping I am getting a following error 'display problem'.
    "Root element not found. Root Schema only describe type defintions. Cannot opent this XSD."
    Is there any direct or work around way to import the file?
    Any help would be appreciated.
    Thanks
    Prem

    Thanks Alexey
      Let me specify some more detail. I got the following XSD file from a third party vendor. I am using XML spyeditor to edit the file. When i tried to add the global element it says the schema is not validated. How can it fix this?
    <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified">
         <xs:include schemaLocation="http://www.ABC.com/schemas/ABCXMLlibrary.xsd"/>
         <xs:complexType name="sesType">
              <xs:sequence>
                   <xs:element name="eserviceNumber" type="xs:string">
                   <xs:element name="SAPPurchaseOrder" type="SAPPurchaseOrderType" minOccurs="0"/>
                   <xs:any namespace="##any" minOccurs="0" maxOccurs="unbounded"/>
              </xs:sequence>
         </xs:complexType>
    </xs:schema>
    Thanks
    Prem

  • Is it ok to make changes to import map by loading files from port manually?

    Hi all,
    I want to load the files from the port which is set to manual and then want to create/modify existing maps already assigned to ports.Is it ok to do this way or do we need to create the import maps with all mappings manually other than port option?
    Thanks

    Hi Arvind,
    You can load the map through port & do changes whatever you want. You can see the map name
    on the header. After making changes if you want the old map also then you need to save it in a different name.
    Regards,
    Pramod

  • Import map file

    Hi Experts,
    I can see that form MDM Console the Ports table under Admin node has field with type "Inbound" and the name of the import map. 
    Could anybody tell how to get this Import map file from the repository if my remote system is set up "Inbound/outbound" as MDM ?
    Thanks for your help
    Kind regards,
    Wei Dona

    Hi,
    In order to connect and to save map files please following the following steps:
    If you are using text file then follow the steps as
    1.Open Import manager.Select repository.enter username &password
    2.Select Type as Delimited text/Excel/Access and so on.
    3.Enter the source file .
    4)Enter the delimiter if Delimited text (eg:space,:,; etc)
    5.Select the source and destination table.
    6.Map the corresponding source and destination fields.
    7.Then go to match records tab select the field as per which the records will b imported.
    8.Go to File-Save.Enter the map name.
    9.Execute the import.
    Next time you want to edit the map or execute the same goto file-Open-map name.
    Hope this give some information.
    Cheers
    Santosh.

  • Importing mapping tables via txt-file

    Hi
    Is it possible to import mapping tables for some dimensions using txt- or csv-file instead of excel-template?

    Yes.
    There is a format called "Ledger Link" which is dirt simple. It is a CSV file that has Source, Target, and Description. If you have a sign flip, you put a - in front of the Target. If instead of explicit map, it is a like, Source is the rule.
    For example......
    110011,3rdPartySales,Third Party Sales
    110021,-ICSales,Intercompany Sales
    11003?,ServiceRevenue,Service Revenue for Accounts starting with 11003 with a length of 6 characters

  • Error while importing the mdl file

    Hi All,
    I have created the warehouse builder owner repository on linux box,but when i try to create repository user its throwing an error as PRS-00305,could not reserve name due to an internal error.
    And when try to import an mdl file also its throwing the same error as above i.e PRS-00305
    If any one know the answer pls send me solution.
    Thanks,
    Krishna

    It might also be the MDL file you are trying to import. How was it exported with dependencies, or not? This might be the problem depending on the environment it is exported from and imported into.
    Give this a try;
    Create a dummy mapping, any will do.
    Save your changes.
    Export only this mapping and ensure export dependencies is not checked.
    Delete the mapping
    Save your changes.
    Try importing this mapping back in to the same environment share with us the results.
    Regards,
    Emrah
    Edited by: cakire82 on Sep 16, 2009 5:13 AM

  • Creation of Import Map for Business Partners

    Hello Guru's,
    Can anyone guide me how to create import maps for Business Partners please , we use Text files.
    Thanks in advance
    Regards
    Srihari

    Hi srihari ,
    Kindly refer to the below links for some further help in this area:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_mdm/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303335373733%7d
    /people/satyajit.chakraborty/blog/2009/01/15/central-mdm-business-partner-creation-scenario-with-galaxy-bpm--part-i
    /people/satyajit.chakraborty/blog/2009/01/16/central-mdm-business-partner-creation-scenario-with-galaxy-bpm--part-ii
    Hope It Helped
    Thanks & Regards
    Simona Pinto

  • Import two XML file in MDM

    Hallo MDM Expert,
    I would like to import two files XML in MDM, because I carry out By Manuel import. besides, are both XML file from two different System needs to remove de-duplication of the both file and compared them. afterwards as a file to the export manager be exported.
    Please could give a Input? which step I can done to Import the both file and alimented de-duplication.
    Thank in advance

    Hi Dominique,
       To Import Second file please follow these steps:
    In Import Manager after you import your first file then go to File --> Connect to Source in import manager, a new window comes then specify your second file name and perform Import normally.
       After both the files are imported you can follow these steps to remove duplicates:
    Matching Mode is used to find and merge duplicates.This can be done in following steps:
          You have to use key mapping if incoming files are from different system.
    Step1. In Data Manager go to Matching Mode and Select Transformation tab.Right click in Transformations pane and select Add Transformation then go to Properties pane and select the field you want to transform.Do the proper substitution in substitution pane example: Suppose that there are two values Marta. and Marta due to the "." MDM will interpret them as different values but they are duplicates so to eliminate this problem you can use substitution. So specify ".' in From and Blank space in To .Create similar transformation for other fields as well.
    Step2. Go to Rules tab and Right click in Rules pane and select Add Rules then go to Properties pane and select the transformed field i.e.[XFM] .
    Specify the scores for success failure and undefined properties as per your requirement.Create similar rules for other fields as well.
    Step3. Go to Strategies tab. and Right click in Strategies pane and select Add strategies In the Rules Pane select the rules you want to include in the Strategy.Min Score and Max Score are calculated automatically. It is the sum of all individual matching rules in this strategy. Low Threshold and High Threshold classify the matching results and must be set manually. They decide the Match Class for a record upon executing the strategy.
    Step4. Go to the Records Pane and to execute the matching, select one or more records from the record set and right-click. Select Match Records from the context menu and select the relevant matching type:
    • Selected vs. Selected matches the selected records with each other
    • Selected vs. Results matches the selected records with the record set derived from the search criteria
    • Selected vs. All matches the selected records with all records in the repository
    • Results vs. Results matches all records that result from the search criteria
    • Results vs. All matches all records that result from the search criteria with the records in the repository
    Step5. On the basis of the Score select the record and See the corresponding matched records in the Matches tab and include the records you want to merge.
    Step6. Go to Merge tab and for the selected matched records select the appropriate values and then right click in the bottom pane and select merge records. So the selected records are now existing as a new single merged record.
    In order to syndicate data out of MDM follow these steps in Syndicator:
    Step1. Go to Destination Items tab in bottom pane. Right click in Destination Items window and select "Add Destination Item" from the Context menu.
    Step2. Go to "Properties" window and fill the required details.
    Similarly you can create other destination fields as per your requirement.
    Step3. Go to "Item Mapping" tab in bottom pane and Map the source field to the required destination field.
    Step4. After all the mapping is done you can "Execute Syndication" and a flat file will be syndicated.
    Note: You can syndicate Client specific data as well using Map Properties tab and selecting Output client system property
    Thanks and Regards,
    <b>Sagar Sonje
    </b>
    <b>Mark Helpful Answers</b>

  • Import Server detects file in Ready folder but does not process

    I have a problem where MDIS detects a file in the ready folder, but it does not launch the import:
    2772 2008/10/22 23:37:52.240   1.xml
    Source file retrieval: Delta: 0.001451 seconds.  
    2772 2008/10/22 23:38:23.428   1.xml
    Source file retrieval: Delta: 0.001151 seconds.  
    2772 2008/10/22 23:38:54.678   1.xml
    Source file retrieval: Delta: 0.006335 seconds.  
    2772 2008/10/22 23:39:25.897   1.xml
    Source file retrieval: Delta: 0.011595 seconds.  
    2772 2008/10/22 23:39:57.272   1.xml
    Source file retrieval: Delta: 0.003268 seconds.  
    2772 2008/10/22 23:40:28.507   1.xml
    Source file retrieval: Delta: 0.006276 seconds.
    The log file shows the above.  You can see it detects the file is there, but since it does not launch the import it does not process the file or even move it to the exception or archive folders.  I have confirmed settings in the MDIS.ini file, e.g. password, etc.  I can import the same file using Import Manager without any errors.
    Please help!

    Hi Jitesh,
    Your suggestion to try a different file type yielded positive reults.  I created a simple tab delimited text file and import map and changed the existing Port from using XML based on the MATMAS05 schema to using the text file.  The log shows:
    6056 2008/10/23 17:32:34.066   [MDS=ROBLB2K1H2J Repos=JAN Master ClientSystem=U2K2_MDM Port=Materials_from_U2K2_MDM]: ImportTask: Task started. Chunk size[50000], No. parallel chunks[5]
    4572 2008/10/23 17:32:34.144   [MDS=ROBLB2K1H2J Repos=JAN Master ClientSystem=U2K2_MDM Port=Materials_from_U2K2_MDM]: xStructuralTransformer: Thread started.
    1160 2008/10/23 17:32:34.144   [MDS=ROBLB2K1H2J Repos=JAN Master ClientSystem=U2K2_MDM Port=Materials_from_U2K2_MDM]: xValueTransformer: Thread started.
    4192 2008/10/23 17:32:34.144   [MDS=ROBLB2K1H2J Repos=JAN Master ClientSystem=U2K2_MDM Port=Materials_from_U2K2_MDM]: xImporter: Thread started.
    4572 2008/10/23 17:32:34.144   [MDS=ROBLB2K1H2J Repos=JAN Master ClientSystem=U2K2_MDM Port=Materials_from_U2K2_MDM]: xStructuralTransformer: Thread finished; Start -> End: 0.000000000 seconds.
    1160 2008/10/23 17:32:34.160   [MDS=ROBLB2K1H2J Repos=JAN Master ClientSystem=U2K2_MDM Port=Materials_from_U2K2_MDM]: xValueTransformer: Thread finished; Start -> End: 0.000000000 seconds.
    4192 2008/10/23 17:32:34.660   Repository Load Successful. [JAN Master]: Delta: 0.085377 seconds.  
    4192 2008/10/23 17:32:35.958   [MDS=ROBLB2K1H2J Repos=JAN Master ClientSystem=U2K2_MDM Port=Materials_from_U2K2_MDM]: xImporter: Thread finished; Start -> End: 1.000000000 seconds.
    6056 2008/10/23 17:32:36.458   [MDS=ROBLB2K1H2J Repos=JAN Master ClientSystem=U2K2_MDM Port=Materials_from_U2K2_MDM]: ImportTask: Task finished. Chunk size[50000], No. parallel chunks[5]
    4192 2008/10/23 17:34:11.133   22355-3-1-10-23-08-06-32-57_081023-063303_999.xml
    Source file retrieval: Delta: 0.006444 seconds.  
    4192 2008/10/23 17:34:11.242   Repository Load Successful. [JAN Master]: Delta: 0.028803 seconds.  
    4572 2008/10/23 17:34:43.825   22355-3-1-10-23-08-06-32-57_081023-063303_999.xml
    Source file retrieval: Delta: 0.003005 seconds.  
    4572 2008/10/23 17:35:16.018   22355-3-1-10-23-08-06-32-57_081023-063303_999.xml
    Source file retrieval: Delta: 0.010113 seconds.  
    4572 2008/10/23 17:35:47.742   22355-3-1-10-23-08-06-32-57_081023-063303_999.xml
    Source file retrieval: Delta: 0.001994 seconds.  
    4572 2008/10/23 17:36:19.419   22355-3-1-10-23-08-06-32-57_081023-063303_999.xml
    Source file retrieval: Delta: 0.012413 seconds.  
    The text file was immediately picked up and imported.  This thus proves that (1) MDIS is functioning, (2) user / password is correct.  Unfortunately you will also see from the log above that when I changed the port back to run on XML the problem has not been resolved.
    Any ideas?

  • Cannot import a txt file in BPC7.5 with amounts containing ","

    Hello all,
    When importing a txt file in BPC7.5 (through standard Import package)
    with amounts containing format xxx,xxx,xxx.xx (where "," is the thousand separator and "." is the
    decimal separator), the importlog file displays that everything is ok.
    However, looking into the report, we see that the amounts are cut off by
    the first thousand separator.
    for example: 3,096.54 has been imported in BPC7.5 as 3  !!!!
    OS : Windows Server 2008 R2(RTM)
    SQL : SQL Server 2008 R2
    BPC 7.5 SP4.
    - The formatting in my Excel 2007 is like this 3,096.54 (so three
    thousand ninety six and 54 cents).
    - The amounts in the SQL table are not correct: in our example,
    we see in the table 3 in stead of 3,096.54
    - My regional settings are indeed English (US) and my decimal separator
    is a point.
    - My delimiter is ";" (semi colon) in transformation file as well as in
    data file.
    Can anyone help me please.
    Best Regards,
    Jico

    Hello Jico,
    I have exactly the same problem. It's not yet solved, but here are some steps I've already done.
    When you open your transformationfile you use to import the data and when you "validate and process" it against the file you want to import, you can see a preview in "output log". Here you can see that automatically your separator (whatever it may be) has been replaced by "," (comma). Since the system uses the comma as column delimiter, I understand that the amount is being cut off at the first thousands separator (being a comma).
    In order to solve this, I tried to use the parameter "OUTPUTDELIMITER" and set it to ";" (in the transformation file):
    OUTPUTDELIMITER=;
    This forces the system to use ";" in the "output log". Now the system can not interpret the "," as a new column.
    However when we execute the import, we get following error message:
    Mapping error: The following doesn't exist in the data file header.[Measure field
    I found something very similar about this error message on:
    Mapping Error : MEASURE FIELD
    This thread is marked as answered, but it's not really telling what to do exactly...
    Best Regards,
    Jonathan

  • Importing a csv file into addressbook

    So I did a search & found this question has come up quite often, but with the person having a slightly different problem, so here goes.
    I am trying to import a csv file into address book, when I go import -> text tile it comes up like it should do and I pick the file, if I select ok at this point, it will quite happily import all of the data no trouble (but in the wrong categories). So I make the changes to what I want ie. Phone other --> Phone (work). Then when I click ok, the button goes from blue to white but nothing happens.
    When I open the csv file in textedit I can see all the values separated by commas.
    Any Ideas?

    I too just had this problem. To clarify all fields work and you can map them. I found that the Outlook CSV file had two problems which were tripping up the AddressBook import function. Note these were both in street address fields so I suspect the poster who said that addresses don't work may have been having that problem.
    The CSV load program does not work if you have commas "," in your data. In my case this was very common for some European addresses as well as some company names. And then the second problem was if there was a carriage return or new line character in a field. This later one was a problem with the address fields. I suspect an AddressBook export to CSV might have this same issue. Specifically, when there were multiple lines to the street address, they had been entered as multiple lines in street address one, as opposed to entering them in multiple fields such as "street 1", "street 2", etc.
    To solve the problem I opened the CSV file using Numbers and did a global find and replace on: commas, substituting the string --- and on the newline character "¶" (ALT+Rreturn) with *.
    Note to reduce some of the remapping I also changed all of the labels with "business" in the header row of the CSV file to "work". This made it a little easier for the AddressBook import function to map fields more correctly.
    After these set of changes rather than the alternating blue then white with nothing behavior it cleanly loaded all of my names. I could then search for "---" and "*" in addressbook's search field to identify all addresses which I had to clean up.
    I hope that is helpful to someone else. The import function really does work. However, it is not robust enough to deal with certain oddities in one's data.

  • "Error: An error occured deleting the import map"

    Hello,
    When trying to delete imported data, I get the following message :
    Error: An error occured deleting the import map
    Detail: Data access error
    And the imported data aren't deleted.
    The loaded file has around 350000 rows for 12 dimensions.
    I never succeeded to load it in one time, only in 3 times with 3 files. It was a first issue.
    And I want now to delete the import to do it again and I can't, due to the error.
    Thanks
    Patrick
    PS : FDM version 11.1.1.3.01
    Log :
    ** Begin FDM Runtime Error Log Entry [2013-04-03-08:49:22] **
    ERROR:
    Code............................................. -2147217900
    Description...................................... ORA-30036: unable to extend segment by 8 in undo tablespace 'UNDOTBS1'
    DELETE FROM tDataSeg3 WHERE ((PartitionKey) = 749) AND (TO_CHAR(PeriodKey,N'YYYYMMDD') Between N'20111231' And N'20111231') AND ((CatKey) = 12)
    Procedure........................................ clsDataManipulation.fExecuteDML
    Component........................................ upsWDataWindowDM
    Version.......................................... 1111
    Thread........................................... 4956
    IDENTIFICATION:
    User............................................. ollivierp
    Computer Name.................................... EPM05
    App Name......................................... FDM_MCHII
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... ORAOLEDB.ORACLE
    Data Server......................................
    Database Name.................................... poh1
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... HPMCHII
    Location ID...................................... 749
    Location Seg..................................... 3
    Category......................................... COMPTE
    Category ID...................................... 12
    Period........................................... Dec - 2011
    Period ID........................................ 31/12/2011
    POV Local........................................ False
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... False
    Is Auditor....................................... False
    ** Begin FDM Runtime Error Log Entry [2013-04-03-08:49:22] **
    ERROR:
    Code............................................. -2147217900
    Description...................................... Data access error.
    Procedure........................................ clsImpProcessMgr.fClearData
    Component........................................ upsWObjectsDM
    Version.......................................... 1111
    Thread........................................... 4956
    IDENTIFICATION:
    User............................................. ollivierp
    Computer Name.................................... EPM05
    App Name......................................... FDM_MCHII
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... ORAOLEDB.ORACLE
    Data Server......................................
    Database Name.................................... poh1
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... HPMCHII
    Location ID...................................... 749
    Location Seg..................................... 3
    Category......................................... COMPTE
    Category ID...................................... 12
    Period........................................... Dec - 2011
    Period ID........................................ 31/12/2011
    POV Local........................................ False
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... False
    Is Auditor....................................... False
    Edited by: user1104274 on 3 avr. 2013 00:10

    The quota on the tablespace 'UNDOTBS1' needs to be extended to allow for the tablespace to grow. Right now it has met it's maximum quota.

  • How to import from desktop (file) avchd in FCE4.0.1

    I copied from a camera onto my macbook avchd footage for later use in FCE4.
    I used the importcommand log and transfer.
    I have three maps; DCIM (empty), MISC (AUTPRINT.MRK) and PRIVATE with a lot of files.
    I tried all the maps (or files in it) to drag into L&transfer but that does not work.
    I am sure I am doing something wrong. How to import avchd footage in FCE?
    Thanks!
    Bruce.

    Read the section in the manual on log and transfer. Once again you can NOT drag and drop to the log and transfer window.
    If the application is crashing you have more serious problems.
    Do NOT go inside the folder structure of the SD card. Select the top level of the folder structure. If that crashes the application, you should take your computer to an Apple service technician.
    I'm assuming the the operating system was correctly installed, and the application was correctly installed from the disc in the Applications folder.

  • Update MDM Import Map

    Hello...
    I am a PI consultant who inherited MDM recently.
    MDM 5.5, SP06
    My issue is that I have an existing map that works fine, but the source schema is changing to add a few new fields.  I need to map the new fields to my existing catalog repository.
    I had to import the revised schema under a unique name (v2 suffix).  Then I assumed I could just change the source schema in my existing map, but that does not look possible.  What is the best way to make such a change?  I am hoping to at least copy the current mapping as nothing is changing there...just adding a few new mappings.
    Thanks!
    Keith
    Edited by: Keith Wendel on Jun 4, 2009 10:30 AM

    HI Keith
    Are you talking of syndication maps?
    In import maps we never put the schema. Just connect to the source file and open your old map. on top of this you can do the mappings for the delta fields and save the map with a new name.
    thanks
    Ravi

Maybe you are looking for