Importing problems (new 10.4.3 iBook, backup 10.2.8 CD)
My old iBook, which was running 10.2.8, died: logic board and hard-drive are both gone. (Note to other users, don't spill sticky drinks inside the machine.) I have a backup of my mail from a few months ago.
My new iBook is running 10.4.3.
I have tried to import my mbox files from my backup CD. I've tried importing en masse and individually (and individually would suck with so many folders); I've tried importing as "Mail for Mac OS X" and as "Other". At best I can get Mail 2.0.5 to import the names of most (not all) of my 194 mail folders and inbox.
The mail folders initially appear under "Imported" as they are supposed to, yet they are empty. If I go to "Mailbox" on the menu, the choice for "Rebuild" is grayed out, so that is not an option to fix them. If I quit Mail and restart, the imported mailboxes disappear.
Could this have something to do with permissions to the files on my CD rom? In the import scripts, I can migrate to files like
/Library/Mail/Mailboxes/Travis.mbox/
and I see greyed-out files like
mbox, mbox.SKindex.isValid, mbox.SKindex, tableofcontents
If that's the problem, do I have to do some batch permission changing operation like "sudo chmod something-or-another" to fix this? How can I effectively do that when there are almost 200 different folders containing the mbox files?
I also note that, when Mail was able to import folder names but not mbox folder contents, it didn't do anything whatsoever for nested folders.
iBook Mac OS X (10.4.3)
Clarification to the above:
Running chmod on a given mbox file didn't help Mail import it. It still imported a folder that's empty and that would disappear after quitting and restarting Mail.
New mystery involving Smart folders:
Mail was able to download mail that was on my POP server (since September). I defined a few smart folders (to identify mail from given senders). These Smart folders see some of the messages from my backup. If I try to click on one of those old backed-up messages, it says that the message "has not been downloaded from the server. You need to take this account online in order to download it." But I don't have an IMAP account. Does this tantalising hint suggest that Mail sort-of sees my messages, and if it sort-of sees them, can we make Mail really see them?
iBook Mac OS X (10.4.3)
Similar Messages
-
Time Machine Problem - New Internal Hard Drive, Now Backup Takes Hours
Need some help!
Background.
Almost 4 year old 24" aluminum iMac; 4 gb ram; 500 gb hard drive; OS 10.6.8.
About 2 months after Alpple Care expired, the internal hard drive failed (New Year's Eve of all times!). Everything else working great.
Had a Mac technician I know install a new 750 gb drive for me. I cloned back from SuperDuper, and was ready to go. The SuperDuper external is 1.5 TB, partitioned - one half TM, the other half SuperDuper.
All apps, internet, mail - fine.
I hooked up my existing Time Macinne (probably not a good idea), and the next backup failed.
Did some research, and since I have plenty of archived backup anyway, decided that the best thing to do would be to erase the TM external, and start fresh.
Did that, and as expected, first backup took a couple hours.
The Problem.
Now, every incremental backup takes 4 to 5 hours, even if no data has changed.
"Indexing" lasts for 45 minues; "Backing Up" reads 600,000 plus files, which also goes on for 30 or 40 minutes (approx.), and wants to Calculate changes etc forever; then the actual backup starts out at 10 kb, and in 20 minutes is at 30 kb and then after about an hour I start getting into gbs and the blue bar progresses pretty fast after that. Then "Finishing Up" takes approximately 2 - 3 hours.
Not right. :~(
What I've Done to Toubleshoot.
First, I re-erased the TM external.
Then reset PRAM and did an SMC reset on the iMac.
Then backed up to TM again. The same problem persisted.
So next, I repeated that process (other than backing up), and I also deleted from the Root Library/Preferences com.apple.timemachine.plist, and from Home/Library/Preferences deleted com.apple.finder.plist. Then rebboted the iMac. Then I did a Disk Utility verify of the empty external - all was/is fine. Then I ran DiskWarrior on the iMac and all was fine; repaired permissions on the iMac from DiscWarrior as well. Then, I did another TM backup to the external, which took a couple hours since it was backing up to an empty drive.
Next 3 incremental backups still take 4 to 5 hours, even if nothing has changed on theiMac.
The Request.
Please if anyone can give me some easy to understand step by step options I might try to get TM working correctly again, it will be most appreciated.
If I've left out any details that might assist, please also let me know.
The problem computer is at home and I'm at work, so if any logs are needed, I can post those later today (but in that event, please tell me exactly which log to post and how to isolate it from System Profiler or Console (as there are many logs to choose from and I want to provide the proper info if someone needs to see a log to assist)).
Thanks in advance!Pondini,
Did every step in D2 (green box) - except did not reinstall Combo Updater which I did late last night.
After that, did a TM backup - started at 6:15.
All apps were off.
Sequence of events and facts:
At start, 434.03 0f 500.1 GB available on the external TM
Last backup shown - 7:58 AM; Oldest Back Up - Yesterday at 9:56 (that's the 1st backup after I reinitialized the external for the 2nd or 3rd time trying to get this thing figured out)
Upon starting and doing the backup -
Preparing 250,000 (approx.) items (too quick to get the final number) - Parenthetically, this AM it was over 600,000; probably has to do with turning off Spotlight per your D2 instructions
Next message -
Backing Up 6.96 GB
Hung at 2 kb to 90 kb for 20 minutes before progressing
Ultimately, at 1.78 GB the progress bar started moving rapidly (as it should) - so this isn't a cable connection issue - the Backup phase took 22 minutes, but from 1.78 GB to 6.96 GB took only a few seconds; I have seen this precise same sequence repeatedly the past 2 days
Next - Backing Up (the candy cane blue and white progress bar) - Preparing 140,000 items - took 12 minutes
Now shows 426.95 GB available on the external
Next - Backing Up (no count of items shown) - started at 7:05 and went until 7:45 (40 minutes)
Next - Finishing Backup (blue/white candy cane progress bar; no count of items shown) - started at 7:45 - went until sometime after 8:15 (can't give a precise time because I need to sit down and eat :~) )
Backup completed (between bites of chicken) at 8:23.
Over 2 hours - something isn't right.
Also, TM Prefs tells me that the Latest Backup was at 7:44 - odd.
Anyway - to take a step further, here's the TM Buddy widget info you might need:
Successful Backup: 02:06:32.
There is no log entry or data showing.
Just as I sent this, a new backup started, and it appears to be going through the same routine, from Preparing ....
Gotta eat.
Please post any further instructions and I'll do what I can tonight.
Thanks!
What is the problem? How do I speed this mother up?
Thanks! -
I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting. -
Problem import to "New project" in 3.1.2?
After update to 3.1.2 import to "New Project" has started to show unexpected behaviour. Some pictures won't show in one project.
Ex import creates two new projects"apr 23, 2011" and "apr 24, 2011". apr 23 shows all photos as it should. arp 24 do not show any photos. If I hover the mouse over the apr 24 project it indicates that there are "2 Versions" there should be 7 Versions?
Both projects are in an Album structure "2011->April". When I select the whole album "April" I see the "missing" photos.
I can create a new project and move the photos to it. That works.
Anyone seen this in 3.1.2? It may be in older versions as well - but I just recently started noticing this.
/regards RogerIt could've been. I'm not very satisfied with how "Automatically split" correlates the date of the image with the date of the project. Oftentimes the last couple of pictures of the day (and not really late at that) gets assigned to the next day, and more often the first pictures of the next day gets sorted into the previous days project.
I'm using iPhone and a couple of Canons. And I have checked the time on all of them recently as we changed to "Daylight Savings Time" not long ago. But I would have thought that that only would affect pictures taken around midnight, give or take an hour. And even so I'm only off GMT by an hour or two. Not many of my photos gets taken between 2200 and 0200 :-)
But for the last incident I'm quite sure it has little to do with time as those photos that didn't show as expected were shot in the afternoon.
And further clarify - during import I saw the photos under the correct date/project, blue tickbox and all. ANd they got imported into Aperture. Only they fail to be visible when I select the project where they were supposed to go. On one occasion they re-appeared after re-start of the application. But on another (other photos/in another project) did not. And re-start Aperture after import just to continue to work is not a good workflow for me ...
/Roger -
Problems trying to restore Time Machine backup to a new computer
Hi there-
I recently purchased a new MacBook Pro and want to downgrade it from Lion to Snow Leopard. I have Time Machine backups from my slightly older MacBook Pro running Snow Leopard. However, when I attempt to restore from the Snow Leopard backup, I get a message stating I can't restore that backup because it was done on a different computer. Is there a way around this so that I can essentially just overwrite my new computer with my latest backup of the older running Snow Leopard? Thanks in advance-I should say though, I don't know for sure if a complete disk wipe will allow you to boot off the 10.6.3 Snow Leopard disks or not, as I don't fully understand how the firmware works. There are two parts I know of, the hardware firmware and the EFI software firmware.
EFI supposedly has it's own partition on the drive, which should be able to be completly erased.. When I installed rEFIt however (it's a alternate firmware allowing me to boot other operating systems), it required two reboots for it to take hold.
I also should say I've never taken a factory Lion installed machine and put Snow Leopard on it.
So far what I've been able to determine is the firmware is blocking the booting of the 10.6.3 disks (the only retail version there is) so you can't install Snow Leopard, if the firmware can be flashed to a earlier verison the 10.6.3 disks should boot as the hardware drivers for 2011 MBP's reside on the 10.6.3 disks.
But if you have a second Mac, then the target disk mode of the link above should work, you can also create a large HFS+ journaled partition in Disk Utility in Lion and then use Target Disk mode of the other Mac to install Snow Leopard there.
I wish you luck, you might have to visit MacRumors or another Mac site to get further information. The Lion machines are very new, Apple is resisting attempts to downgrade from Lion to Snow Leopard and not many have done it yet.
I bought my machine pre-Lion so I can stick with Snow and avoid the Lion pain, but have it on another older Mac for experimental puposes (quad boot).
I'm pretty sure rEFIt will allow you to boot off the 10.6.3 disks.
I'm sorry if I couldn't have been more help, I'm still learning how to get around this 10.6.3 block myself.
If I had a factory Lion machine, I would most certainly post a blog how to downgrade the SOB to 10.6 somehow. -
Hi and tnxs for reading.
I notice that a considerable space (1GB) of my iPad backup on iCloud is used from iBooks, since I have about 1Gb of PDF loaded.
Since I have all sorted and kept on my Mac and I sync everything via iTunes, I am considering to disable iBook backup on iCloud.
However I am wondering: when I'll buy a new iOS device and restore to my present iOS device backup and sync again all my PDF document to it, am I going to loose the way I sorted all my documend on different iBook folder if I do not keep iCloud backup?
TnxsI fixed the problem.
Most likely the solution lies in the available Icloud storage space. I Had about 600 MB free. I deleted all my photo's (after importing them in iPhoto). The backup of the Ipad 2 didn't shrink (probably because it's an incremental backup). I then deleted my Icloud backup for the Ipad and created a new one. This one was 400 MB in stead of 3 GB. Photo's was about 2. GB. Apparantly other stuff was also still in the incremental Ipad backup that I didn't need to restore. So I tried to import the smaller backup and that went smoothly. So I think it's either the backup size or the free space in Icloud. Or something changed with al my factory resets and such.
I'm good to go anyway. -
LR3.2 import problem on computer with Windows OS
LR3.2 import problem on Windows OS
This is a continuation of a question that I posed on August 22, 2010 in the discussion string "Cannot import CR2". I have not been able to resolve the issue of importing an image into an existing folder location. I had not been able to work on this issue for a number of weeks due to other circumstances, until today. Note that the following people had attempted to provide answers and suggestions already: ssprengel, JayS In CT.
I use a laptop with a Windows operating system and a Macintosh desktop with Snow Leopard. I run Lightroom on both of them. The Windows laptop has Windows Vista Home service pack 2, version 6.0 [6002]. Around August 12th I upgraded from Lightroom 2 [481478], to Lightroom 3 on the laptop. I left the LR2 on the laptop as well as LR3. On September 12th I upgraded the laptop to LR3.2. No other changes have been to the laptop or its software applications that I know of.
My current attempts at resolving the issue reveal that when I created a new catalog "Test Catalog" in LR3 and saved that catalog to my desktop new folder labeled "Test Catalog" that I can import an image into LR3.2 to a new folder on the laptop's desktop. I then deleted the images via LR3.2 Folders Remove function and tried to import the images into an existing folder as presented in the LR3.2 Import dialog, but get the error message "The following files were not imported because they could not be read.". When I import images into a new folder placed on the desktop, I can use all functions in LR3 e.g. Develop module. I cannot import images into existing folders on the laptop's hard drive - I have tried importing into the entire existing folders in the following hierarchy: c:\users\Michael\My Documents\My Pictures\2010 but always get the same error message.
LR3.2 does correctly backups upon exiting each time I quit the program, so I know that there isn't any issue of writing to that backup folder which is contained in an upper folder that contains the lightroom catalogs. I have even created a new Word file, saved it into the folder with Lightroom catalogs, opened it up, modified it, saved it, and saw that it works OK, so that tells me there is no problem with a Read-Only folder attribute.
I cannot recall if upon the upgrade from LR2.6 to LR3 that I chose to upgrade the catalog to LR3 version. Would that matter, if yes, what do I verify, how do I manual upgrade the catalog.
History of actions between August 10th that I have taken follows between the [[[[ and ]]]]:
[[[[Preference settings for Default Catalog are set to start with a specific catalog that I call "Lightroom master catalog", it is not set to the "Load most recent catalog".
All of the following were using my laptop: Previously I had no problem with LR2 for any functions. I just purchased an Epson 7000 media storage device, and in early August and practiced importing images into LR2, and those images were pulled in OK. Next, I upgraded to LR3. I discovered that the Epson's images had been placed into a wrong folder when I opened LR3. I used the remapping function in LR3 to move the images into the correct folder. Next, I used a SanDisk card reader to import images into LR3 into an existing folder of images, but the following error message appeared "the following files were not imported because they could not be read" (Import Results said 'some import operations were not performed'). I tried importing a single image, and multiple images, but had the same error. I tried switching the card reader to each of 4 different USB port on the laptop, with the same error occurring on each USB port used.
In order to try to isolate the problem. I took the SanDisk card reader with the memory card and successfully imported the images into LR3 on my Macintosh desktop computer; so to me the problem is not the card reader or the memory card. I also used the SanDisk recovery disk while using my laptop to look at the files on the memory card and I could see all the images correctly while in the recovery program, but I have not copied the images to the laptop's hard disk, and have not tried an import into the laptop's LR3. I did not import images directly from my camera to the laptop LR3 since I did not think it would help with the troubleshooting.
I then ran the Repair from the Adobe LR3 CD upgrade disk, on my laptop. Then I tried doing the import using the SanDisk reader and memory card, but the same problem occurred and same error message, that the files could not be imported (I was trying to import into a folder of existing images). I then used the Laptop's Control Panel function to remove LR3 application. Then I did a fresh upgrade of LR3 on my laptop, but the same error message and I am unable to do any import of the memory card from the card reader. I then tried to do an image import from the Epson 7000 into the laptop, and the same error message and I am unable to do any import into a folder with existing images. I then tried doing an image import into LR2 on the laptop, and got the same problem to occur when trying to import into an existing folder of images. I have a couple of Canon EOS SLR digital cameras, and the issue occurs for any of the file types of the cameras.
Went into LR3 Preferences, General Tab, I now checked the previously unchecked box for Import Options - "Show import dialog when a memory card is detected".
Connected the Canon XTi directly with a cable to the laptop computer. Note that Canon's information said that Picture Transfer Protocol is automatically used when the XTi is directly connected to a computer, so I did not need to change anything in the camera's menu for communications choices (there is no communication menu in fact). I selected one image and copied it to the laptop desktop. Tried to import it into LR3 into a folder of existing images but got the error message "Could not copy a file to the requested location." While in LR3, I changed the location of where the file would be copied into - any of my existing folders of images; tried 5 different folders, but kept getting the same error message.
With the card reader connected via USB port on the laptop, I copied one image file to the desktop, and then tried importing into LR3 into a folder of existing images. Got the error message "Could not copy a file to the requested location."]]]]I am not clear if by 'import' you are trying to copy or move the files from a location to another or if you are adding the files to a catalog. My comments may not, therefore, be too helpful.
Firstly, with both LR2 and LR3 installed you will have both catalogs present, but if you try to open the LR2 catalog with LR3 you will be prompted to update the catalog. You will thus know which catalog you are working on.
Secondly, if you are reading direct from the camera, you should connect using the 'PC connection' mode.
Thirdly, there is an issue with reading .CR2 files directly from the early Canon DSLRs (in Europe named 300D, 350D, 400D). While they are visible with the Canon software, they can not be seen with Windows explorer nor can they be accessed with Lightroom.
I suggest that you take the CF card out of the camera and copy the files using Windows Explorer in to the destination folder. You are then sure that the files are on the PC.
If you have the right Codec installed, you can view them with Windows photo gallery; if you don't, you can use one of the Canon software packages to view the files. You are then sure that the files are not corrupted.
Then import the files to your LR catalog using the normal import routine selecting 'add without moving'. I have tried this routine successfully using my 350D using both LR1.x and LR3.x. If that doesn't work - I'm lost.
Frank -
IPhoto 7.1.5 - Disappearing Photos After Import of New Photos
This is a revisit of an earlier problem that has been addressed in several discussions. The problem is reproducible.
Background: Running 10.6.7 and iPhoto 7.1.5
I have a 14 GB Photo Library with > 10 thousand photographs. After importing another 100 photos, iPhoto AGAIN showed ONLY the latest event photos. Closing iPhoto and reopening iPhoto shows all of the events for ~1 sec and then "poof" the photo library says that there are 0 photos. I have followed the instructions in numerous discussions including my earlier post. Nothing works permanently.
SUMMARY: Repeated rebuilds of the photo library with iPhoto Library Manager (iPLM) bring the events/photos back until the next photo import. Then I am back where I started.
I have done the following:
1. Booted on the startup CD and checked and repaired all disk permissions (many) and other disk errors (none).
2. Made a backup of the photo library.
3. Rebuild photo library in iPhoto. No joy. This NEVER helps anything.
4. Deleted pLists and opened iPhoto. No help.
5. Ran BatChmod to check on all of the permissions to RW. No permission problems are seen now.
6. Ran iPhoto Library Manager and confirmed permissions set there are OK. It is important to make sure that the permissions are set correctly to RW in iPLM.
7. Ran iPLM and I can access ALL of the events and photos. (This is where the last discussion ended.)
8. Imported more photos from my iPhone and “poof” no more photos seen in iPhoto. I Go back to step 7 and wait 1.5 hours for a rebuild in iPLM.
Any further suggestions would be helpful. This is occurring after EVERY import of new photos. As long as I do not import more photos I can access all events and photos.Tony:
It could be that the card has been compromised and iPhoto doesn't recognize it. Open Image Capture and see if you can upload the photos to a folder on the desktop. If that can be done reformat the card with the camera, take a couple of test shots and try again.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard. -
New iPhone restore from old backup and lost new photos
Hi there
I recently got a iphone 5 and from the excitement of seeing Obama in cape town, took pictures of his speech and even recorded my friends shaking his hand and have brief converstaions. Now when i connected the new phone into my mac, itunes requested a restore from old backup. So agreed, not knowing that all the new photos / movies of the US president would be deleted!!!
Can i reftieve them or not. and why doenst Apple provide such informaition to users for new restorations?
Please help!eh2756 wrote:
Same problem. My wife lost her iPhone 3Gs while on vacation. Purchased iPhone 5 on the trip and took pictures with it. When we got back home I clicked restore from a previous backup and all the pictures disappeared.
I wonder if Apple is reading this thread. ?????????
NO... What did you expect the phone to do when you restore from a backup.
You should've imported the new pics to your computer as you would a digital camera.. -
Fixed: TIFF image display / import problems
Hello All,
I posted this in the discussion threads where I had previously discussed it with other members. But, felt that it would be good to share with everyone who is importing their photo's into the new iPhoto 6.
I, like many others, have been having a terrible time getting my iPhoto collection imported into the new iPhoto 6 program.
I have tried both the upgrade method (on a backup copy of my original library), and a fresh import of all my files.
Without fail, all of my TIFF images gave me trouble. Some looked like squiggly lines. Some looked like a diagonally distorted image (like you see on old Televisions trying to tune in difficult stations). And, some just plain refused to work.
All of my problem images look fine in the thumbnail (the library view). But, you quickly discover the problem when viewing the full-size image in the "edit" mode.
Some of my TIFF images are 30 megabytes in size, and many of them are smaller files of a more typical size. I found that the smaller files were just as unlikely to work as the larger ones.
And, while converting to JPEG may be an option, I didn't want to lose the depth and detail that TIFF offers (especially on pictures of documents / writing). The original TIFF images will offer greater detail when blown-up than compressed JPG files.
All of these images worked fine in iPhoto 5, and display perfectly fine in every other program. But, iPhoto 6 just refused to display them properly.
Well, I think I found the fix.
Today I downloaded the new iPhoto 6.01 update. But, that didn't fix the problem either. So much for Apple fixing it.
Anyway, I have been experimenting, and finally found a difference between images that worked and those that didn't.
The images that worked, have an ICC profile embedded in them from the device that created the image (in my case my scanner).
So, I set out to find out if simply removing the ICC profile would fix the problem.
And, through my experimenting, I found that if I opened the image in another program, and then exported it as either a TIFF (the same format) or a JPEG that the resulting image would open in iPhoto 6 just fine.
Further examination demonstrated that the ICC information was removed from the exported file.
As I understand it, ICC is basically an image color correction / calibration tag. It enables different devices to properly display and print the image with the proper colors.
Basically, each device has a color profile (scanner, monitor, printer, camera, etc.). This is to make sure that when you see something on the screen that it looks the same as when you print it out. Likewise, you want the image on the screen to match what the scanner and digital camera saw.
So, these are essentially conversion tables to make sure that each device properly displays or prints the image as the original source "saw" it.
Anyway, not wanting to manually strip this information from each file, I looked on the Internet for an automated solution. And, fortunately I found one.
http://www.colormanagement.com/technicalresources/files_targets_and_utilities/mac_os_xscripts/
The file you are looking for is "Mac Os X ColorSync Toolbar Script: Remove ICC profile". Click on the title just mentioned to download the script.
It is a Macintosh Script that you simply download to your desktop (or anywhere else you would prefer). It is in a Stuffit Archive, so you'll need Stuffit Expander to decompress it (basically the Mac equivalent of a ZIP file).
Once decompressed, you should see a "script" icon that is labeled "Remove Profile".
Simply "drag" your original files and drop them onto this icon / script. The script will then remove the embedded ICC information from the image file.
Once you have removed the ICC information from your image's file, try importing it into iPhoto 6 again. Then, see if it works
It is important that you perform this on a backup / duplicate copy of your original files. You don't want to damage your only copy if something goes wrong.
Now, one further note: If you do this, you may see the image looks different. In my case, the image is truer to the way it really looked when I scanned it in. The paper texture looks right now.
If you want to do this while keeping the image's appearance the same as it looks now, then here's another way:
Open the file in Apple's "Preview" program. This is usually the default image view.
Then, do a "Save As" or "Export" to create a new copy of the image. If you perform an Export, be sure to set the image quality high or you may inadvertently reduce your pictures detail (especially if you export to JPEG).
This essentially does the same thing. But, it will take more work if you have multiple images.
Using the previously mentioned script, you should be able to drag and drop multiple files in a group.
Anyway, I hope this helps the rest of you out.
Let me know if it fixes the problem for you as well.Hello All,
I have an update:
It is definitely not a user account issue. I just completed a fresh install of OS 10.3.9 on my Mac Mini.
I performed a fresh install (on a freshly formatted hard drive partition), and made the installation as bare as could be for the sake of preventing potential problems.
I installed OS 10.3.9, and all the standard items in the usual OS 10.3.9 installation. I specifically left-out all the foreign language stuff, all the online programs (for other ISP providers), and misc. garbage.
I also left off all the iLife programs (every iLife program) that came with the restore disks. I even left-off the original QuickTime installation. My thought here was that I wanted to make sure that there were no problems introduced by upgrading the original iLife Applications to iLife '06.
So, this way, all the iLife '06 programs are installed fresh with no upgrading being performed.
So, I installed this bare OS 10.3.9 installation. Then, installed all the updates that were available. I repaired permissions before and after each update. And, installed all the updates from downloads from Apple's website (Not using Software Update).
After verifying that Software Update could not find any additional updates available, I then installed iLife '06.
This required first installing Quicktime 7.0.4 from the iLife '06 DVD.
After installing QuickTime, I then proceeded to install the iLife '06 package (remember that this is a completely new iLife install - not an upgrade install since I avoided installing the older versions).
Once iLife '06 was installed, I then installed the recent 6.0.1 updates for all the iLife Apps.
Then, I launched the iPhoto program for the first time to see if it would properly import my TIFF images.
Unfortunately, it still displays them as if they are scrambled (like a blocked television / cable channel).
So, with that done, I can confirm that it is not a corrupt file or another program on my system causing the problem. It is definitely a problem with iPhoto 6 / 6.0.1 and OS 10.3.9.
Just thought I would post the update here for others to add to their knowledge-base. Maybe if we rule out potential problems we'll be able to find the actual solution.
Again, this same set of images imports just fine into iPhoto 5 on OS 10.3.9 and 10.4.4. And, it also imports just fine into iPhoto 6.0.1 in OS 10.4.5. So, it is a problem apparently specific to OS versions 10.4.4 and older using iPhoto 6 or 6.0.1.
As mentioned previously, these TIFF images can be made to import fine if I remove the ICC information from the image. So, that may provide some clue as to where the flaw is in the iPhoto 6 / 6.0.1 program. -
Itune forces to setup as new ipad or restore from backup?!
I have 3 ipads and 2 iphones in my house sharing the same apple ID, but when I tried to connect one of the ipads to itune on my PC, it only gives option to set up as new phone or restore from backup, either option would wipe out the data I already have on the ipad. All other devices can connect to itune without problems. Found another thread with the same problem, but the solution of logging on windows with different user does not solve my problem. Can anyone help? Itune has to be the worst and dumbest product from apple!
I too have this very frustrating issue. It worked fine 2 weeks ago.
I have two devices setup, and they have the same name, but that has never been a problem as one is a 5G 80GB iPod, and the other is an iPhone 3GS.
Now, everytime I plug my iPhone into my PC, iTunes comes up and asks me to restore.
Grrr... I have restored 3 times. I have also performed a complete iPhone reset and a restore... same thing, and I have no idea why.
Please help.
Thanks,
S. -
Problem: new entered data is saved but I am facing one error message --- no
This is a module program for gate entry of materials(miro). This is a simple entry form which updates z tables with data entered. I have to send the new record details automatically through mail to the particular vendor email id from where the material has been purchased.
Problem: new entered data is saved but I am facing one error message --- no authorization to unpack list with rfc when the program is sending list through mail.
PROGRAM ZMMI001_GRN_ENTRY_BARCODE MESSAGE-ID ZMM .
*Table Declaration
TABLES : EKKO , EKPO , LFA1 , MARC ,
MARD , J_1IMTCHID , EKET , MSEG,
MKPF , ZMMT001_GRN_GATE,
ZMMT002_GRN_ITEM.
TABLES: ADR6.
*Table Control Declaration
CONTROLS : TC1 TYPE TABLEVIEW USING SCREEN 1000.
DATA: COLS LIKE LINE OF TC1-COLS.
*Internal Table Declaration
DATA : BEGIN OF IT_TC1 OCCURS 0,
SEL,
SNO(2) TYPE C,
ITEMCODE(18) TYPE C,
ITEMNAME(40) TYPE C,
QUANTITY TYPE P DECIMALS 2,
EXCISE(13) TYPE P DECIMALS 2,
END OF IT_TC1.
DATA : IT_TEMP_TC1 LIKE IT_TC1 OCCURS 0 WITH HEADER LINE.
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA : IT_EKPO LIKE EKPO OCCURS 0 WITH HEADER LINE.
DATA : IT_EKKO LIKE EKKO OCCURS 0 WITH HEADER LINE.
DATA : IT_EKET LIKE EKET OCCURS 0 WITH HEADER LINE.
DATA : WK_ZMMT01 LIKE ZMMT001_GRN_GATE.
DATA : IT_ZMMT01 LIKE ZMMT001_GRN_GATE OCCURS 0 WITH HEADER LINE.
DATA : IT_ZMMT02 LIKE ZMMT002_GRN_ITEM OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF IT_TEMP_EKPO OCCURS 0,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
END OF IT_TEMP_EKPO.
DATA : BEGIN OF IT_MSEG OCCURS 0,
MBLNR LIKE MSEG-MBLNR,
MJAHR LIKE MSEG-MJAHR,
ZEILE LIKE MSEG-ZEILE,
BWART LIKE MSEG-BWART,
MATNR LIKE MSEG-MATNR,
EBELN LIKE MSEG-EBELN,
EBELP LIKE MSEG-EBELP,
BUDAT LIKE MKPF-BUDAT,
MENGE LIKE MSEG-MENGE,
END OF IT_MSEG.
DATA : BEGIN OF IT_TEMP_MSEG OCCURS 0,
MBLNR LIKE MSEG-MBLNR,
MJAHR LIKE MSEG-MJAHR,
ZEILE LIKE MSEG-ZEILE,
BWART LIKE MSEG-BWART,
EBELN LIKE MSEG-EBELN,
END OF IT_TEMP_MSEG.
DATA : BEGIN OF IT_TEMP_MKPF OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
MJAHR LIKE MKPF-MJAHR,
BUDAT LIKE MKPF-BUDAT,
BKTXT LIKE MKPF-BKTXT,
END OF IT_TEMP_MKPF.
*Data Declaration
DATA : WK_SNO TYPE I,
WK_LIFNR LIKE LFA1-LIFNR,
WK_EBELN(10) TYPE C,
WK_VBELN(10) TYPE C,
WK_FKDAT TYPE D,
WK_NAME LIKE LFA1-NAME1,
WK_SCHNO(10) TYPE C,
WK_CHALNO(10) TYPE C,
WK_CHALDATE(10) TYPE C,
WK_GRNO(10) TYPE C,
WK_GRDATE(10) TYPE C,
WK_VEHICLE(10) TYPE C,
WK_CARRIER(10) TYPE C,
WK_FREIGHT(13) TYPE P DECIMALS 2,
WK_MDOC(3) TYPE C,
WK_DEPT(7) TYPE C,
WK_MODE(7) TYPE C,
WK_BASIC(13) TYPE P DECIMALS 2,
WK_EXCISE(13) TYPE P DECIMALS 2,
WK_TAX(13) TYPE P DECIMALS 2,
WK_APPVAL(13) TYPE P DECIMALS 2,
WK_CHAL(2) TYPE C,
WK_FORM38(9) TYPE C,
WK_COMMENT(30) TYPE C,
WK_MAKTX(40) TYPE C,
WK_LINES TYPE I,
WK_TOTAL LIKE MARD-LABST,
WK_LGORT LIKE MARD-LGORT,
WK_EXCISE_IND,
WK_TOT_EXCISE LIKE EKPO-NETWR,
WK_DIFF LIKE EKPO-NETWR,
WK_BSTYP LIKE EKKO-BSTYP,
WK_BSART LIKE EKKO-BSART,
WK_DIFF_QTY LIKE EKET-MENGE,
WK_101_QTY LIKE EKET-MENGE,
WK_102_QTY LIKE EKET-MENGE,
WK_122_QTY LIKE EKET-MENGE,
WK_WERKS LIKE EKPO-WERKS,
WK_CHAR_SNO TYPE STRING,
WK_DATE LIKE SY-DATUM,
WK_TIME LIKE SY-UZEIT.
DATA : WK_DATE1 LIKE SY-DATUM,
WK_DATE2 LIKE SY-DATUM,
WK_FISYEAR TYPE I,
WK_CHAR_YEAR(20) TYPE C.
DATA : V_UCOMM TYPE SY-UCOMM,
V_INDEX(10) TYPE C,
V_QUANTITY(8) TYPE C.
**DECLARATION FOR INPUT HELP*
TYPES : BEGIN OF VALUES,
TXZ01 LIKE EKPO-TXZ01,
MENGE LIKE EKPO-MENGE,
MATNR LIKE EKPO-MATNR,
END OF VALUES.
TYPES : BEGIN OF VALUES1,
EBELN LIKE EKKO-EBELN,
END OF VALUES1.
TYPES : BEGIN OF VALUES2,
NAME1 LIKE LFA1-NAME1,
LIFNR LIKE LFA1-LIFNR,
END OF VALUES2.
DATA: PROGNAME LIKE SY-REPID,
DYNNUM LIKE SY-DYNNR,
DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
VALUES_TAB TYPE TABLE OF VALUES WITH HEADER LINE,
VALUES_TAB1 TYPE TABLE OF VALUES1,
VALUE_EBELN TYPE TABLE OF VALUES1.
VALUES_TAB2 TYPE TABLE OF VALUES2.
DATA : VALUES_TAB2 TYPE VALUES2 OCCURS 0 WITH HEADER LINE.
DATA : RETURN_TAB LIKE DDSHRETVAL OCCURS 0 WITH HEADER LINE.
*nidhi
DATA: BEGIN OF IT_LFA1 OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
ADRNR LIKE LFA1-ADRNR,
END OF IT_LFA1.
DATA: BEGIN OF IT_ADR6 OCCURS 0,
ADDRNUMBER TYPE ADR6-ADDRNUMBER,
SMTP_ADDR TYPE ADR6-SMTP_ADDR,
END OF IT_ADR6.
*nidhi
*& Module FILL_TABLE_CONTROL OUTPUT
text
MODULE FILL_TABLE_CONTROL OUTPUT.
READ TABLE IT_TEMP_TC1 INTO IT_TC1 INDEX TC1-CURRENT_LINE.
ENDMODULE. " FILL_TABLE_CONTROL OUTPUT
*& Module READ_TABLE_CONTROL INPUT
text
MODULE READ_TABLE_CONTROL INPUT.
*Validation for Item code
CLEAR : EKPO-MATNR,
EKPO-WERKS.
IF sy-uname = 'GATE1020'.
IF ( SY-UNAME = 'GATE1010' OR SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR SY-UNAME = 'GATE1080' OR
SY-UNAME = 'ABAP' ).
**SELECT SINGLE bstyp FROM EKKO INTO WK_BSTYP WHERE ebeln = wk_ebeln.
**SELECT SINGLE bsart FROM EKKO INTO WK_BSART WHERE ebeln = wk_ebeln.
READ TABLE VALUES_TAB WITH KEY MATNR = IT_TC1-ITEMCODE.
**ELSE.
SELECT SINGLE MATNR WERKS
FROM EKPO CLIENT SPECIFIED
INTO (EKPO-MATNR , EKPO-WERKS )
WHERE MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
MATNR EQ IT_TC1-ITEMCODE.
ENDIF.
IF SY-SUBRC NE 0 AND NOT IT_TC1-ITEMCODE IS INITIAL.
CLEAR it_tc1.
MESSAGE E003 WITH TEXT-002.
ELSE.
SELECT SINGLE MAKTX FROM MAKT
CLIENT SPECIFIED
INTO WK_MAKTX WHERE
MANDT = SY-MANDT AND
MATNR = IT_TC1-ITEMCODE AND SPRAS = SY-LANGU.
ENDIF.
ENDIF.
**SELECT SINGLE bstyp FROM EKKO INTO WK_BSTYP WHERE ebeln = wk_ebeln.
**SELECT SINGLE bsart FROM EKKO INTO WK_BSART WHERE ebeln = wk_ebeln.
IF ( SY-UNAME = 'GATE1010' OR SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR SY-UNAME = 'GATE1080' OR SY-UNAME =
'ABAP' ).
IF WK_BSART = 'ZLR' .
Validation for Quantity.
IF NOT IT_TC1-QUANTITY IS INITIAL.
READ TABLE VALUES_TAB WITH KEY MATNR = IT_TC1-ITEMCODE.
IF SY-SUBRC EQ 0 AND IT_TC1-QUANTITY GT VALUES_TAB-MENGE.
MESSAGE E003 WITH TEXT-013.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
*Validation for Max.Stock Level
CLEAR : MARC-MABST.
SELECT SINGLE MABST FROM MARC
CLIENT SPECIFIED
INTO MARC-MABST
WHERE MANDT = SY-MANDT AND
MATNR = IT_TC1-ITEMCODE AND
WERKS = EKPO-WERKS.
CLEAR : MARD-LABST ,
MARD-INSME .
SELECT SINGLE labst insme FROM mard
CLIENT SPECIFIED
INTO (mard-labst , mard-insme )
WHERE MANDT = SY-MANDT AND
matnr = it_tc1-itemcode
AND werks = ekpo-werks.
SELECT SUM( LABST ) SUM( INSME ) FROM MARD
CLIENT SPECIFIED
INTO (MARD-LABST , MARD-INSME )
WHERE MANDT = SY-MANDT AND
MATNR = IT_TC1-ITEMCODE
AND WERKS = EKPO-WERKS.
CLEAR : WK_TOTAL.
WK_TOTAL = MARD-LABST + MARD-INSME + IT_TC1-QUANTITY.
IF WK_BSART = 'ZLR'.
IF WK_TOTAL GT MARC-MABST.
MESSAGE E001 WITH IT_TC1-ITEMCODE.
ENDIF.
ENDIF.
Appending the table control data to Internal table
READ TABLE IT_TEMP_TC1 INDEX TC1-CURRENT_LINE.
IT_TC1-SNO = TC1-CURRENT_LINE.
IF SY-SUBRC EQ 0.
MODIFY IT_TEMP_TC1 FROM IT_TC1 INDEX TC1-CURRENT_LINE.
ELSE.
READ TABLE IT_TEMP_TC1 WITH KEY ITEMCODE = IT_TC1-ITEMCODE.
IF SY-SUBRC NE 0.
IT_TC1-ITEMNAME = WK_MAKTX.
IF IT_TC1-ITEMCODE IS INITIAL.
CLEAR IT_TC1.
ELSE.
APPEND IT_TC1 TO IT_TEMP_TC1.
ENDIF.
ELSE.
MESSAGE E003 WITH TEXT-004.
ENDIF.
ENDIF.
CLEAR : J_1IMTCHID-J_1ICAPIND.
SELECT SINGLE J_1ICAPIND FROM J_1IMTCHID
CLIENT SPECIFIED
INTO J_1IMTCHID-J_1ICAPIND
WHERE MANDT = SY-MANDT AND
MATNR = IT_TC1-ITEMCODE AND
WERKS = EKPO-WERKS.
IF SY-SUBRC EQ 0.
IF J_1IMTCHID-J_1ICAPIND = 'N'.
WK_EXCISE_IND = 'N'.
ELSE.
WK_EXCISE_IND = 'E'.
ENDIF.
ENDIF.
ENDMODULE. " READ_TABLE_CONTROL INPUT
*& Module USER_COMMAND_1000 INPUT
text
MODULE USER_COMMAND_1000 INPUT.
V_UCOMM = SY-UCOMM.
CASE V_UCOMM.
WHEN 'WK_SAVE'.
IF WK_APPVAL > 0.
IF ( SY-UNAME = 'STORE1010' OR SY-UNAME = 'STORE1020' OR
SY-UNAME = 'STORE1030' OR SY-UNAME = 'STORE1040' OR
SY-UNAME = 'STORE1050' OR SY-UNAME = 'STORE1060' OR
SY-UNAME = 'STORE1070' OR SY-UNAME = 'STORE1080' ).
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = WK_VBELN
IMPORTING
OUTPUT = WK_VBELN.
SELECT * FROM EKKO INTO TABLE IT_EKKO WHERE EBELN = WK_EBELN
AND
LOEKZ NE 'X'.
IF SY-SUBRC EQ 0.
READ TABLE IT_EKKO INDEX 1.
WK_BSTYP = IT_EKKO-BSTYP.
ENDIF.
SELECT * FROM EKPO CLIENT SPECIFIED
INTO TABLE IT_EKPO WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN AND LOEKZ NE 'X'.
SORT IT_EKPO BY EBELN EBELP.
IF WK_BSTYP = 'L'.
SELECT * FROM EKET CLIENT SPECIFIED
INTO TABLE IT_EKET WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN.
IF SY-SUBRC EQ 0.
SORT IT_EKET BY EBELN EBELP ETENR.
LOOP AT IT_EKPO.
CLEAR WK_DIFF_QTY.
LOOP AT IT_EKET WHERE EBELN = IT_EKPO-EBELN
AND EBELP = IT_EKPO-EBELP
AND EINDT LE SY-DATUM.
WK_DIFF_QTY = WK_DIFF_QTY + IT_EKET-MENGE -
IT_EKET-WEMNG.
ENDLOOP.
IF WK_DIFF_QTY GT 0.
IT_TEMP_EKPO-EBELN = IT_EKET-EBELN.
IT_TEMP_EKPO-EBELP = IT_EKET-EBELP.
IT_TEMP_EKPO-MATNR = IT_EKPO-MATNR.
APPEND IT_TEMP_EKPO.
ENDIF.
ENDLOOP.
ENDIF.
ELSEIF WK_BSTYP = 'F'.
SELECT * FROM EKET
CLIENT SPECIFIED
INTO TABLE IT_EKET
WHERE MANDT = SY-MANDT AND
EBELN = IT_EKPO-EBELN.
LOOP AT IT_EKPO.
CLEAR : WK_DIFF_QTY.
READ TABLE IT_EKET WITH KEY EBELN = IT_EKPO-EBELN
EBELP = IT_EKPO-EBELP.
IF SY-SUBRC EQ 0.
WK_DIFF_QTY = IT_EKPO-MENGE - IT_EKET-WEMNG.
ENDIF.
IF WK_DIFF_QTY GT 0.
IT_TEMP_EKPO-EBELN = IT_EKET-EBELN.
IT_TEMP_EKPO-EBELP = IT_EKET-EBELP.
IT_TEMP_EKPO-MATNR = IT_EKPO-MATNR.
APPEND IT_TEMP_EKPO.
ENDIF.
ENDLOOP.
ENDIF.
SORT IT_TEMP_EKPO BY EBELN EBELP.
PERFORM BDC_DYNPRO USING 'SAPLMIGO' '0001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OK_GO'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GODYNPRO-PO_NUMBER'.
PERFORM BDC_FIELD USING 'GODYNPRO-PO_NUMBER'
WK_EBELN.
PERFORM BDC_DYNPRO USING 'SAPLMIGO' '0001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OK_GO'.
IF WK_EXCISE_IND = 'E'.
PERFORM BDC_FIELD USING 'J_1IEXHEAD-EXNUM'
WK_VBELN.
PERFORM BDC_FIELD USING 'J_1IEXHEAD-EXDAT'
WK_FKDAT.
PERFORM BDC_FIELD USING 'GOHEAD-LFSNR'
WK_VBELN.
ELSE.
PERFORM BDC_FIELD USING 'GOHEAD-LFSNR'
WK_VBELN.
ENDIF.
CLEAR : WK_CHAR_SNO.
WK_CHAR_SNO = WK_SNO.
CONDENSE WK_CHAR_SNO NO-GAPS.
PERFORM BDC_FIELD USING 'GOHEAD-BKTXT'
WK_CHAR_SNO.
LOOP AT IT_TEMP_TC1.
READ TABLE IT_TEMP_EKPO WITH KEY MATNR =
IT_TEMP_TC1-ITEMCODE.
IF SY-SUBRC EQ 0.
CLEAR V_INDEX.
V_INDEX = SY-TABIX.
CONDENSE V_INDEX NO-GAPS.
PERFORM BDC_DYNPRO USING 'SAPLMIGO' '0001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OK_GO'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GODYNPRO-DETAIL_ZEILE'.
PERFORM BDC_FIELD USING 'GODYNPRO-DETAIL_ZEILE'
PERFORM BDC_FIELD USING 'GODYNPRO-DETAIL_ZEILE'
V_INDEX.
PERFORM BDC_DYNPRO USING 'SAPLMIGO' '0001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OK_GO'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GOITEM-ERFMG'.
PERFORM BDC_FIELD USING 'GOITEM-ERFMG'
CLEAR V_QUANTITY.
V_QUANTITY = IT_TEMP_TC1-QUANTITY.
CONDENSE V_QUANTITY NO-GAPS.
PERFORM BDC_FIELD USING 'GOITEM-ERFMG'
V_QUANTITY.
PERFORM BDC_FIELD USING 'GOITEM-LSMNG'
V_QUANTITY.
perform bdc_field using 'GOITEM-LGOBE'
WK_LGORT.
ENDIF.
ENDLOOP.
CALL TRANSACTION 'MIGO' USING BDCDATA
MODE 'E'
UPDATE 'L'.
IF SY-SUBRC NE 0.
MESSAGE E003 WITH TEXT-003.
LOOP AT SCREEN.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
LEAVE PROGRAM.
ELSE.
CLEAR : WK_TOT_EXCISE.
IF NOT WK_EXCISE IS INITIAL.
LOOP AT IT_TEMP_TC1.
READ TABLE IT_EKPO WITH KEY MATNR = IT_TEMP_TC1-ITEMCODE.
IF SY-SUBRC EQ 0.
WK_TOT_EXCISE = WK_TOT_EXCISE +
( ( ( IT_EKPO-NETWR / IT_EKPO-MENGE ) * 16 / 100 )
IT_TEMP_TC1-QUANTITY ).
ENDIF.
ENDLOOP.
WK_DIFF = WK_EXCISE - WK_TOT_EXCISE.
IF WK_DIFF LE 0.
WK_DIFF = -1 * WK_DIFF.
ENDIF.
IF WK_DIFF GE 1.
WK_COMMENT = 'Difference in Excise. Please Check!'.
ENDIF.
ENDIF.
SELECT * FROM EKPO CLIENT SPECIFIED
INTO TABLE IT_EKPO WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN.
IF SY-SUBRC EQ 0.
READ TABLE IT_EKPO INDEX 1.
WK_WERKS = IT_EKPO-WERKS.
ENDIF.
SELECT * FROM ZMMT001_GRN_GATE
CLIENT SPECIFIED
INTO TABLE IT_ZMMT01
WHERE MANDT = SY-MANDT AND
WERKS = WK_WERKS.
IF SY-SUBRC EQ 0.
SORT IT_ZMMT01 BY SERIAL DESCENDING.
READ TABLE IT_ZMMT01 INDEX 1.
WK_SNO = IT_ZMMT01-SERIAL + 1.
ELSE.
WK_SNO = 1.
ENDIF.
CLEAR WK_ZMMT01.
WK_ZMMT01-MANDT = SY-MANDT.
WK_ZMMT01-SERIAL = WK_SNO.
WK_ZMMT01-WERKS = WK_WERKS.
WK_ZMMT01-EBELN = WK_EBELN.
WK_ZMMT01-LIFNR = WK_LIFNR.
WK_ZMMT01-CHALNO = WK_CHALNO.
WK_ZMMT01-CHALDATE = WK_CHALDATE.
WK_ZMMT01-BILLNO = WK_VBELN.
WK_ZMMT01-BILLDATE = WK_FKDAT.
WK_ZMMT01-GRNUMBER = WK_GRNO.
WK_ZMMT01-GRDATE = WK_GRDATE.
WK_ZMMT01-VEHICLE = WK_VEHICLE.
WK_ZMMT01-CARRIER = WK_CARRIER.
WK_ZMMT01-FREIGHT = WK_FREIGHT.
WK_ZMMT01-MDOC = WK_MDOC.
WK_ZMMT01-DEPT = WK_DEPT.
WK_ZMMT01-PAYMODE = WK_MODE.
WK_ZMMT01-BASIC = WK_BASIC.
WK_ZMMT01-EXCISE = WK_EXCISE.
WK_ZMMT01-TAXAMT = WK_TAX.
WK_ZMMT01-APPVAL = WK_APPVAL.
WK_ZMMT01-CHALINV = WK_CHAL.
WK_ZMMT01-FORM38 = WK_FORM38.
WK_ZMMT01-COMMENTS = WK_COMMENT.
WK_ZMMT01-CDATE = SY-DATUM.
WK_ZMMT01-CTIME = SY-UZEIT.
WK_ZMMT01-PERSON = SY-UNAME.
IF WK_FKDAT+4(2) = '04' OR
WK_FKDAT+4(2) = '05' OR
WK_FKDAT+4(2) = '06' OR
WK_FKDAT+4(2) = '07' OR
WK_FKDAT+4(2) = '08' OR
WK_FKDAT+4(2) = '09' OR
WK_FKDAT+4(2) = '10' OR
WK_FKDAT+4(2) = '11' OR
WK_FKDAT+4(2) = '12'.
WK_DATE10(4) = WK_FKDAT0(4).
WK_DATE1+4(2) = '04'.
WK_DATE1+6(2) = '01'.
ELSEIF
WK_FKDAT+4(2) = '01' OR
WK_FKDAT+4(2) = '02' OR
WK_FKDAT+4(2) = '03'.
WK_FISYEAR = WK_FKDAT+0(4).
WK_FISYEAR = WK_FISYEAR - 1.
WK_CHAR_YEAR = WK_FISYEAR.
CONDENSE WK_CHAR_YEAR NO-GAPS.
WK_DATE1+0(4) = WK_CHAR_YEAR.
WK_DATE1+4(2) = '04'.
WK_DATE1+6(2) = '01'.
ELSE.
ENDIF.
nidhi
SELECT LIFNR ADRNR FROM LFA1 INTO TABLE IT_LFA1 WHERE LIFNR =
WK_ZMMT01-LIFNR.
SELECT ADDRNUMBER SMTP_ADDR FROM ADR6 INTO TABLE IT_ADR6 FOR
ALL ENTRIES IN IT_LFA1 WHERE ADDRNUMBER = IT_LFA1-ADRNR.
SELECT SINGLE * FROM ZMMT001_GRN_GATE
CLIENT SPECIFIED
WHERE MANDT = SY-MANDT AND
WERKS = WK_WERKS AND
LIFNR = WK_LIFNR AND
BILLNO = WK_VBELN AND
BILLDATE GE WK_DATE1.
IF SY-SUBRC EQ 0.
MESSAGE E003 WITH TEXT-006.
ENDIF.
CLEAR IT_ZMMT02.
REFRESH IT_ZMMT02.
LOOP AT IT_TEMP_TC1.
IT_ZMMT02-MANDT = SY-MANDT.
IT_ZMMT02-SERIAL = WK_SNO.
IT_ZMMT02-WERKS = WK_WERKS.
IT_ZMMT02-EBELN = WK_EBELN.
IT_ZMMT02-ITEMCODE = IT_TEMP_TC1-ITEMCODE.
IT_ZMMT02-DESCRIPTION = IT_TEMP_TC1-ITEMNAME.
IT_ZMMT02-QUANTITY = IT_TEMP_TC1-QUANTITY.
IT_ZMMT02-EXCISE = IT_TEMP_TC1-EXCISE.
APPEND IT_ZMMT02.
CLEAR IT_ZMMT02.
ENDLOOP.
IF IT_ZMMT02[] IS INITIAL.
MESSAGE E003 WITH TEXT-007.
ENDIF.
IF SY-UNAME = 'GATE1010' AND WK_WERKS NE '1010'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1020' AND WK_WERKS NE '1020'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1030' AND WK_WERKS NE '1030'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1040' AND WK_WERKS NE '1040'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1050' AND WK_WERKS NE '1050'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1060' AND WK_WERKS NE '1060'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'ABAP' AND WK_WERKS NE 'ABAP'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1070' AND WK_WERKS NE '1070'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1080' AND WK_WERKS NE '1080'.
MESSAGE E003 WITH TEXT-008.
ENDIF.
INSERT ZMMT001_GRN_GATE FROM WK_ZMMT01.
INSERT ZMMT002_GRN_ITEM FROM TABLE IT_ZMMT02.
IF SY-SUBRC EQ 0.
COMMIT WORK.
MESSAGE I002 WITH WK_SNO.
********nidhi*******************************************************
CALL SCREEN 1001.
CLEAR WK_LIFNR.
CLEAR WK_EBELN.
CLEAR WK_NAME.
CLEAR WK_SCHNO.
CLEAR WK_CHALNO.
CLEAR WK_CHALDATE.
CLEAR WK_VBELN.
CLEAR WK_FKDAT.
CLEAR WK_GRNO.
CLEAR WK_GRDATE.
CLEAR WK_VEHICLE.
CLEAR WK_CARRIER.
CLEAR WK_FREIGHT.
CLEAR WK_MDOC.
CLEAR WK_DEPT.
CLEAR WK_MODE.
CLEAR WK_BASIC.
CLEAR WK_EXCISE.
CLEAR WK_TAX.
CLEAR WK_APPVAL.
CLEAR WK_CHAL.
CLEAR WK_FORM38.
REFRESH IT_TEMP_TC1.
CLEAR WK_FISYEAR.
CLEAR WK_DATE1.
CLEAR WK_CHAR_YEAR.
CALL TRANSACTION 'ZMMI001'.
ELSE.
ROLLBACK WORK.
MESSAGE E003 WITH TEXT-006.
ENDIF.
ENDIF.
ELSE.
MESSAGE E009 WITH TEXT-014.
ENDIF.
WHEN 'WK_EXIT'.
WHEN 'WK_CLEAR'.
CLEAR WK_LIFNR.
CLEAR WK_EBELN.
CLEAR WK_NAME.
CLEAR WK_SCHNO.
CLEAR WK_CHALNO.
CLEAR WK_CHALDATE.
CLEAR WK_VBELN.
CLEAR WK_FKDAT.
CLEAR WK_GRNO.
CLEAR WK_GRDATE.
CLEAR WK_VEHICLE.
CLEAR WK_CARRIER.
CLEAR WK_FREIGHT.
CLEAR WK_MDOC.
CLEAR WK_DEPT.
CLEAR WK_MODE.
CLEAR WK_BASIC.
CLEAR WK_EXCISE.
CLEAR WK_TAX.
CLEAR WK_APPVAL.
CLEAR WK_CHAL.
CLEAR WK_FORM38.
REFRESH IT_TEMP_TC1 .
CLEAR WK_FISYEAR.
CLEAR WK_DATE1.
CLEAR WK_CHAR_YEAR.
WHEN 'DELETE'.
DELETE IT_TEMP_TC1 WHERE SEL = 'X'.
ENDCASE.
ENDMODULE. " USER_COMMAND_1000 INPUT
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDIF.
ENDFORM. "BDC_FIELD
*& Module STATUS_1000 OUTPUT
text
MODULE STATUS_1000 OUTPUT.
SET PF-STATUS 'GRN'.
SET TITLEBAR 'GRN'.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'IT_TC1-ITEMCODE'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'WK_EBELN'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'WK_LIFNR'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
LOOP AT SCREEN.
IF SCREEN-NAME NE 'WK_COMMENT'.
SCREEN-INPUT = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
IF ( SY-UNAME = 'GATE1010' OR SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR SY-UNAME = 'GATE1080' OR SY-UNAME =
'ABAP' ).
LOOP AT SCREEN.
IF SCREEN-NAME = 'WK_SNO' OR
SCREEN-NAME = 'SNO' OR
SCREEN-NAME = 'WK_COMMENT' .
SCREEN-INVISIBLE = 1.
SCREEN-ACTIVE = 0.
SCREEN-INPUT = 0.
SCREEN-OUTPUT = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
IF WK_LIFNR IS INITIAL.
SET CURSOR FIELD 'WK_LIFNR'.
ELSEIF WK_EBELN IS INITIAL.
SET CURSOR FIELD 'WK_EBELN'.
ELSEIF WK_VBELN IS INITIAL.
SET CURSOR FIELD 'WK_VBELN'.
ELSEIF WK_FKDAT IS INITIAL.
SET CURSOR FIELD 'WK_FKDAT'.
ENDIF.
ELSE.
IF NOT WK_SNO IS INITIAL.
IF SY-UNAME = 'STORE1010'.
WK_WERKS = '1010'.
ELSEIF SY-UNAME = 'STORE1020'.
WK_WERKS = '1020'.
ELSEIF SY-UNAME = 'STORE1030'.
WK_WERKS = '1030'.
ELSEIF SY-UNAME = 'STORE1040'.
WK_WERKS = '1040'.
ELSEIF SY-UNAME = 'STORE1050'.
WK_WERKS = '1050'.
ELSEIF SY-UNAME = 'STORE1060'.
WK_WERKS = '1060'.
ELSEIF SY-UNAME = 'STORE1070'.
WK_WERKS = '1070'.
ELSEIF SY-UNAME = 'STORE1080'.
WK_WERKS = '1080'.
ENDIF.
SELECT SINGLE * FROM ZMMT001_GRN_GATE INTO WK_ZMMT01
WHERE SERIAL = WK_SNO AND
WERKS = WK_WERKS.
IF SY-SUBRC EQ 0.
WK_WERKS = WK_ZMMT01-WERKS.
WK_EBELN = WK_ZMMT01-EBELN.
WK_LIFNR = WK_ZMMT01-LIFNR.
WK_CHALNO = WK_ZMMT01-CHALNO.
WK_CHALDATE = WK_ZMMT01-CHALDATE.
WK_VBELN = WK_ZMMT01-BILLNO.
WK_FKDAT = WK_ZMMT01-BILLDATE.
WK_GRNO = WK_ZMMT01-GRNUMBER.
WK_GRDATE = WK_ZMMT01-GRDATE.
WK_VEHICLE = WK_ZMMT01-VEHICLE.
WK_CARRIER = WK_ZMMT01-CARRIER.
WK_FREIGHT = WK_ZMMT01-FREIGHT.
WK_MDOC = WK_ZMMT01-MDOC.
WK_DEPT = WK_ZMMT01-DEPT.
WK_MODE = WK_ZMMT01-PAYMODE.
WK_BASIC = WK_ZMMT01-BASIC.
WK_EXCISE = WK_ZMMT01-EXCISE.
WK_TAX = WK_ZMMT01-TAXAMT.
WK_APPVAL = WK_ZMMT01-APPVAL.
WK_CHAL = WK_ZMMT01-CHALINV.
WK_FORM38 = WK_ZMMT01-FORM38.
WK_COMMENT = WK_ZMMT01-COMMENTS.
SELECT * FROM ZMMT002_GRN_ITEM INTO TABLE IT_ZMMT02
WHERE SERIAL = WK_SNO AND
WERKS = WK_WERKS.
IF SY-SUBRC EQ 0.
CLEAR IT_TEMP_TC1.
REFRESH IT_TEMP_TC1.
LOOP AT IT_ZMMT02.
IT_TEMP_TC1-SNO = SY-TABIX.
IT_TEMP_TC1-ITEMCODE = IT_ZMMT02-ITEMCODE.
IT_TEMP_TC1-ITEMNAME = IT_ZMMT02-DESCRIPTION.
IT_TEMP_TC1-QUANTITY = IT_ZMMT02-QUANTITY.
APPEND IT_TEMP_TC1.
CLEAR IT_TEMP_TC1.
ENDLOOP.
ENDIF.
ENDIF.
LOOP AT SCREEN.
IF ( SCREEN-NAME NE 'WK_SNO' ) AND
( SCREEN-NAME NE 'WK_SAVE' ) AND
( SCREEN-NAME NE 'WK_CLEAR' ) AND
( SCREEN-NAME NE 'WK_EXIT' ).
SCREEN-INPUT = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
LOOP AT TC1-COLS INTO COLS WHERE INDEX GT 0.
COLS-SCREEN-INPUT = '0'.
MODIFY TC1-COLS FROM COLS INDEX SY-TABIX.
ENDLOOP.
ENDIF.
ENDIF.
WK_DATE = SY-DATUM.
WK_TIME = SY-UZEIT.
TC1-LINES = 20.
ENDMODULE. " STATUS_1000 OUTPUT
*& Module EXIT_1000 INPUT
text
MODULE EXIT_1000 INPUT.
CASE SY-UCOMM.
WHEN 'BACK' OR 'CANCEL' OR 'EXIT' OR 'WK_EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " EXIT_1000 INPUT
*& Module ITEM_CODE INPUT
text
MODULE ITEM_CODE INPUT.
REFRESH : VALUES_TAB.
CLEAR : VALUES_TAB.
IF ( SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1010' OR
SY-UNAME = 'GATE1030' OR
SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR
SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR
SY-UNAME = 'STORE1020' OR
SY-UNAME = 'STORE1030' OR
SY-UNAME = 'STORE1040' OR
SY-UNAME = 'STORE1050' OR
SY-UNAME = 'STORE1060' OR
SY-UNAME = 'STORE1070' OR
SY-UNAME = 'STORE1010' OR
SY-UNAME = 'ABAP' ).
SELECT * FROM EKKO CLIENT SPECIFIED
INTO TABLE IT_EKKO WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
LOEKZ NE 'X'.
IF SY-SUBRC EQ 0.
READ TABLE IT_EKKO INDEX 1.
WK_BSTYP = IT_EKKO-BSTYP.
WK_BSART = IT_EKKO-BSART.
ENDIF.
if wk_bsart = 'ZLR'.
SELECT * FROM EKPO CLIENT SPECIFIED
INTO TABLE IT_EKPO WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
LOEKZ NE 'X'.
SORT IT_EKPO BY EBELN EBELP.
IF WK_BSTYP = 'L' AND WK_BSART = 'ZLR'.
SELECT * FROM EKET CLIENT SPECIFIED
INTO TABLE IT_EKET WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN.
IF SY-SUBRC EQ 0.
SORT IT_EKET BY EBELN EBELP ETENR.
LOOP AT IT_EKPO.
CLEAR WK_DIFF_QTY.
LOOP AT IT_EKET WHERE EBELN = IT_EKPO-EBELN
AND EBELP = IT_EKPO-EBELP
AND EINDT LE SY-DATUM.
WK_DIFF_QTY = WK_DIFF_QTY + IT_EKET-MENGE - IT_EKET-WEMNG.
ENDLOOP.
IF WK_DIFF_QTY GT 0.
VALUES_TAB-TXZ01 = IT_EKPO-TXZ01.
VALUES_TAB-MENGE = WK_DIFF_QTY.
VALUES_TAB-MATNR = IT_EKPO-MATNR.
APPEND VALUES_TAB.
ENDIF.
ENDLOOP.
ENDIF.
ELSEIF WK_BSTYP = 'F'.
SELECT mseg~mblnr
mseg~mjahr
mseg~zeile
mseg~bwart
mseg~matnr
mseg~ebeln
mseg~ebelp
mkpf~budat
mseg~menge INTO TABLE it_mseg
FROM mkpf INNER JOIN mseg
ON mkpfmblnr EQ msegmblnr
AND mkpfmjahr EQ msegmjahr
FOR ALL entries IN it_ekpo
WHERE bwart IN ('101','122','102')
AND werks = it_ekpo-werks
AND ebeln = it_ekpo-ebeln
AND ebelp = it_ekpo-ebelp.
SELECT * FROM EKET CLIENT SPECIFIED
INTO TABLE IT_EKET
WHERE MANDT = SY-MANDT AND
EBELN = IT_EKPO-EBELN.
LOOP AT IT_EKPO.
CLEAR : WK_DIFF_QTY.
wk_101_qty,
wk_102_qty,
wk_122_qty.
LOOP AT it_mseg WHERE ebeln = it_ekpo-ebeln AND
ebelp = it_ekpo-ebelp.
IF it_mseg-bwart = '101'.
wk_101_qty = wk_101_qty + it_mseg-menge.
ENDIF.
IF it_mseg-bwart = '102'.
wk_102_qty = wk_102_qty + it_mseg-menge.
ENDIF.
IF it_mseg-bwart = '122'.
wk_122_qty = wk_122_qty + it_mseg-menge.
ENDIF.
ENDLOOP.
if not it_mseg[] is initial.
wk_diff_qty = it_ekpo-menge - wk_101_qty
- wk_102_qty - wk_122_qty.
else.
wk_diff_qty = it_ekpo-menge.
endif.
READ TABLE IT_EKET WITH KEY EBELN = IT_EKPO-EBELN
EBELP = IT_EKPO-EBELP.
IF SY-SUBRC EQ 0.
WK_DIFF_QTY = IT_EKPO-MENGE - IT_EKET-WEMNG.
ENDIF.
IF wk_diff_qty LE it_ekpo-menge.
IF WK_DIFF_QTY GT 0.
VALUES_TAB-TXZ01 = IT_EKPO-TXZ01.
VALUES_TAB-MENGE = WK_DIFF_QTY.
VALUES_TAB-MATNR = IT_EKPO-MATNR.
APPEND VALUES_TAB.
ENDIF.
ENDLOOP.
ENDIF.
ELSE.
SELECT TXZ01
MATNR FROM EKPO CLIENT SPECIFIED
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
LOEKZ NE 'X'.
ENDIF.
ELSE.
SELECT TXZ01
MATNR FROM EKPO CLIENT SPECIFIED
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
LOEKZ NE 'X'.
ENDIF.
SORT VALUES_TAB BY TXZ01.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'IT_TC1-ITEMCODE'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'IT_TC1-ITEMCODE'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = VALUES_TAB
RETURN_TAB = RETURN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
*BREAK-POINT.
IF SY-SUBRC = 0.
READ TABLE RETURN_TAB INDEX 1.
SELECT SINGLE MAKTX FROM MAKT CLIENT SPECIFIED
INTO WK_MAKTX WHERE
MANDT = SY-MANDT AND
MATNR = RETURN_TAB-FIELDVAL AND SPRAS = SY-LANGU.
ENDIF.
ENDMODULE. " ITEM_CODE INPUT
*& Module CHECK_INPUT INPUT
text
MODULE CHECK_INPUT INPUT.
CLEAR : EKKO-EBELN , EKKO-LIFNR.
SELECT SINGLE EBELN LIFNR FROM EKKO CLIENT SPECIFIED
INTO (EKKO-EBELN , EKKO-LIFNR ) WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN.
IF SY-SUBRC NE 0 AND ( SY-UNAME = 'GATE1010' OR
SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR
SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR
SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR
SY-UNAME = 'GATE1080' OR SY-UNAME = 'ABAP' ).
IF WK_EBELN NE SPACE.
MESSAGE E003 WITH TEXT-001.
ENDIF.
ELSE.
WK_LIFNR = EKKO-LIFNR.
CLEAR : LFA1-NAME1.
SELECT SINGLE NAME1 FROM LFA1 CLIENT SPECIFIED
INTO LFA1-NAME1 WHERE
MANDT = SY-MANDT AND
LIFNR = WK_LIFNR.
IF SY-SUBRC EQ 0.
WK_NAME = LFA1-NAME1.
ENDIF.
ENDIF.
IF ( SY-UNAME = 'GATE1010' OR SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR SY-UNAME = 'GATE1080' OR SY-UNAME =
'ABAP' ).
IF wk_vbeln IS INITIAL.
set cursor field wk_vbeln.
MESSAGE E003 WITH text-009.
ENDIF.
IF wk_fkdat IS INITIAL.
MESSAGE E003 WITH text-010.
ENDIF.
ENDIF.
IF ( SY-UNAME = 'STORE1010' OR SY-UNAME = 'STORE1020' OR
SY-UNAME = 'STORE1030' OR SY-UNAME = 'STORE1040' OR
SY-UNAME = 'STORE1050' OR SY-UNAME = 'STORE1060' OR
SY-UNAME = 'STORE1070' OR SY-UNAME = 'STORE1080' ).
CLEAR : ZMMT001_GRN_GATE.
SELECT SINGLE EBELN CDATE FROM ZMMT001_GRN_GATE
CLIENT SPECIFIED
INTO (ZMMT001_GRN_GATE-EBELN ,
ZMMT001_GRN_GATE-CDATE )
WHERE MANDT = SY-MANDT AND
SERIAL = WK_SNO AND WERKS = WK_WERKS.
IF SY-SUBRC EQ 0.
SELECT MBLNR
MJAHR
BUDAT
BKTXT FROM MKPF CLIENT SPECIFIED
INTO TABLE IT_TEMP_MKPF
WHERE MANDT = SY-MANDT AND
BUDAT = ZMMT001_GRN_GATE-CDATE
AND BKTXT = WK_SNO.
IFHi,
after calling you programm and get the message call transaction su53. That willl display the authorization that you need.
Hope this helps.
Regards
Bernd -
Final Cut Pro/GY-HD111E import problems?
Final Cut Pro/GY-HD111E import problems?
With a brand new Mac Pro and very latest Final Cut Studio complete with updates I'm having a little problem trying to import footage directly from a JVC GY-HD111E (yes I'm in PAL land, UK) via FireWire into FCP.
Footage is 720p/25p and timeline is set up in FCP that way.
I'm doing a 'capture now'. The first clip I'm trying to import is about 45 minutes long with no cuts/breaks whatsoever.
What happens is after about 60 seconds or so, it FCP automatically breaks the clip for no reason and starts a new one, trouble is, when it does this I lose about 4 seconds of footage at that point.
It continues to break clips randomly, sometimes after 40 seconds or so, sometimes after 95 seconds, but usually between 30 seconds and 2 minutes and each time it starts a new clip I lose between 1 and 6 seconds.
As I say, there are zero breaks or cuts in this clip, I have a 45 minute clip that was shot in one take, not even a pause anywhere.
Is this a JVC issue or a Final Cut issue?
It's a pain as it simply means I can't import my 9 hours of footage hence I can't get on with this project.
Any ideas why this phenomenon is happening?
Thanks guys.I mean I get the same errors.
Let me explain again.
There are NO start/stop/pauses in this clip.
I'm trying to import just ONE clip with no breaks, again, there are NO start/stop/pause, it is one continuous clip of 15 minutes duration.
The JVC creates some sort of errors at the Firewire output stage, it drops frames or other errors, FCP gets confused and creates a new clip, even though it is the same clip, but due to the GoP structure, it looses a few seconds too hence I can't import the footage as I keep loosing bits here and there mid clip. It is randam, every 30 to 100 seconds or so it will do this. -
I am having to install tbird again on a new system, I copied and backup-ed my previous emails. When I view my copies and/or restored email files they are empty, nothing is displayed and the window shows message of being empty. I an sure of the backup and of my copy/paste steps. Where and/or what has happened to my emails? I also searched each disk and all files for email extensions (*.mozmsgs and *.sbd and *.sbf) with no results. I can not find a way to restore over 10 years worth of very important emails. Can someone please help me recover what I know is their? All my emails in Seamonkey are on another system (the one I replaced with new win7 pro 64 i7 based system) and all the emails I had in tbird, before having to reinstall everything on new system due to something that happened to the os, are the copied and backup-ed files that are showing empty. Prior to new install all old Seamonkey emails transferred to tbird and all the tbird emails prior were their and were the copied/backup-ed files showing empty now. This is turning into my worst experience and nightmare in over 25 years of systems. I am really lost on this one. please help....
Are you saying you split your profile between C and D drive, perhaps through specifying a location in the account settings.
BTW.
*.mozmsgs useless duplicate files created for windows search integration. Simply wasted space on the disk.
*.sbd a folder indicating the presence of a sub folder (contains no mail at all.
*.sbf (I don't know that one.
*.msf an index of mail. contains tags, but otherwise useless and will be recreated when the mail is loaded in Thunderbird so it can display the mail list.
*. that is no file extension. You mail in files with the same name as the folders they came from. -
Updated to latest I-Tunes. Since then whenever I import a new cd to the library it does not get the album artwork. Automatically download missing album artwork is enabled in Preferences but the art work still does not appear in my library?
I'm having the same problem as the OP, I can't find that file "profiles.ini"
can't re-install firefox, deleted all files related to Mozilla and Firefox, still locked out by missing Firefox profile
I posted on my own problem recently w/ no response (https://support.mozilla.org/en-US/search?a=1&asked_by=GPStyne&w=2),
so far all posts on this support page have been confusing and I've been unable to find any of the things they spoke of trying to change it.
at this point I'm begrudgingly running Safari hoping someone can help me fix this, can't believe i can't just delete all and reinstall like a normal program/app
Maybe you are looking for
-
Transfer files from SAP R/3(unix server) to windows
Hi TechGurus, We have a requirement where in , we are extracting data from SAP table into a text file using OPEN DATASET in TEXT MODE. Then using a third party tool (Connect-direct), we are transferring text files to windows server using unix script,
-
Where can i get in depth training on imovie?
imovie has a pretty good amount of options & so many different tools to make a video look just about any way you want. there are a lot of people with youtube channels advising how to use this app, but nobody really shows you anything other then basic
-
Fsck throwing up a bunch of errors with my ESP
I've had the same problem this guy seemed to have; my Arch install wouldn't be able to mount my EFI partition. All this happened after I updated a few packages yesterday: I had some kernel panic, and when I tried to fix it, I clearly messed something
-
Import CSV file: column count mismatch by always 1
Hello, I am trying to import data from a CSV file into a HANA db table with an .hdbti file. I have a large structure of 332 fields in the table. When I activate the files to start the import, I always get the following message: CSV table column count
-
Oracle 10g Release 2 Express Edition Connection Error
Hello, i recently started to convert one of out existing applications over to the new free version or oracle express, only to find that i would run into a few errors. The project is an asp.net c# application, when the web site is ran and a search is