In 10.2 docucorp, how to add a manual condition for a group

Hi,
I've grouped some faps in 10.2 by applying groupbegin and group end rules. Can I add a common manual condition for this group in 10.2?
Thanks,
Sai krishna

Hi Sai krishna,
No, sorry can't do it. The ability to add a "common" trigger to a group of faps appeared in release 11.3, when the concept of sub-forms was first introduced.
Gaétan

Similar Messages

How to add a new tab for the project?

Dear All Experts,
    Could you tell me how to add a new tab for the project?
    Pls refer to the screenshot as below:
Thanks!
Xinling Zhang

Hi,
    The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
    And in cj02, there is no this tab also in the wbs detailed screen,
Thanks!
Xinling

How to add a search help for a field in Screen Personas?

I just started learning to use a Screen Personas, and I want to know how to add a search help for a field.
I found a property in the help document named "IsLookupSupported". Is it the key? But I saw it was gray in the field I created, and its value is "false". I could not change it.

Hi, Tamas,
I found the reason. The function Z_WEBRFC_READ_DATA_SH had a string concatenation error.
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
The correct code is like:
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},{"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
Another question is, I can't get any words in Chinese from WebRFC. It returns error when I try it. How can I configure it?
Xin

How to add multiple test conditions in 'test' attribute expression of xsl:if tag

Hi all,
How to add multiple test conditions in 'test' attribute expression of <xsl:if> tag ?
I have 2 parameters and I want To skip the massage if this 2 conditions happened I tried to write it :
        <xsl:when test="($TransferToCompany = 0 and $ObjectInclide=1 )">
        <b1im_skip xmlns="" info=" Obect Will Not Transfer To company">
        </b1im_skip>
      </xsl:when>
But I get an error while I am trying to transfer The object (Account) true B1if
I am working with SBO 9 PL 13
thank you
shachar

Hi saado
Check this link:
http://stackoverflow.com/questions/318875/can-you-put-two-conditions-in-an-xslt-test-attribute
Kind regards,
Radek

How to add a user to the wheel group?

How to add a user to the wheel group in leopard?

In Leopard, users can be added to system groups using 'dscl'. For example, while logged into an "admin" account, the command below can be entered using "/Applications" > "Utilities" > "Terminal.app" to add a user "username" to the "wheel" group:<pre>
sudo /usr/bin/dscl . -append /groups/wheel GroupMembership username</pre>
If you prefer a GUI, "Workgroup Manager.app", included with the Leopard version of the "Server Admin Tools" can be used.
http://www.apple.com/support/downloads/serveradmintools105.html

How to add a user to an existing group????

Can't seem to find how to add a user to an existing group (staff). I am trying to share data (rw) between my admin account (root) and a development user. On any other UNIX system I would just add the user name in the /etc/group file & logout/login in. It don't work here!
Suggestions??
thanx
mt

OS X doesn't use /etc/groups. This file is present but does nothing AFAIK.
Leopard uses directory services to handle groups and users.
membership in groups with GID>500 can be handled from GUI in system preferences->accounts. other groups can be handled from terminal with dscl (directory services command line). do man dscl for details.
to add a user to a group you'd do
sudo dscl . append /groups/groupname GroupMembership username
However, there should be no need to do it with "staff". every user with an account on your computer is a member of staff by default.

Hi All ,How to add a new field for MEDRUCK if we havea ZMEDRUCK

Hi All ,
        How to add a new field for MEDRUCK if we have a ZMEDRUCK
Req: If I want to add a new field for the following text editor line :
IN MAIN WINDOW > TEXT EDITOR> SERCH FOR TOTAL_AMOUNT-->
In that we will have
&ekko-waers&    &komkfkwrt&
(currency)       (numerics)
Pls send the Code to make these changes .Pls its urgent
Thanks&Regards.
Bharat.

Hi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
<b>Reward points for useful Answers</b>
Regards
Anji

How to add a document type for the residence status GB in infotype 48

Hi Team,
How to add a document type for the residence status GB in infotype 48.
Please answer this at the earliest.PFA screnshot.
Thanks
chris

I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
When a relationship is created you may watch it also from either end (again INFO is the starting point).
It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

How to add a related content for a particular document in UCM

Hi All
How to add a related content for a particular document in UCM. On which table it stores all the related document details. Can anyone suggest me a document which helps me to know how to add related contents for a document
With thanks and regards
Anoop

I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
When a relationship is created you may watch it also from either end (again INFO is the starting point).
It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

How to Add the title name for Graph in Excel

Dear Friends
I am using LabVIEW 8.0.I need how to add the title name for chart in Excel.
Jayavel
Solved!
Go to Solution.

Do you have the Report Generation Toolkit? If so, the Excel Easy Graph VI has an input for that.
If you don't have the toolkit then you will need to use ActiveX. Please do a search on how to use ActiveX (there are examples that ship with LabVIEW) to control Excel. There are also lots of example in the Excel thread. NOTE: DO NOT POST QUESTIONS IN THAT THREAD.
Ultimately you will need to look up the information in MSDN.

SCCM 2012 - How to add domain id to local administrator group of all clients

SCCM 2012 - How to add domain id to local administrator group of all clients
Hi,
i have a domain id sccmadmin which is a part of domain admins group too.
Need to add this ID to the local administrators group of all clients. How do I do this? Please help!

Hi ,
you need to choose the second option .
First option will remove all the domains users from the local administrator group available in all the PC'S .Then local administrator group will only have the users updated on the members list present in group policy.
Note : Local admins accounts on the local administrators groups will not be removed.
Second option will add the newly created group to the local administrator group in all the PC'S and it will not remove the existing members in the local administrators group.
Step 1 : Just try to create one new group for SCCM management .
Step 2 : Then add the SCCM account to that group.
Step 3 : Then please create a new group policy on that just choose the second option.On that option just add the newly created group to be an member of administrator group in all the PC'S
Why i have asked you to create a new group ?
Because in second option , we don't have a option to add a individual user .
Once you have created a group policy it will like below snap.
As an additional i will tell how to find the newly created group policy is applying to computer objects or not ans also i will tell you how to force update the group policy
1.gpresult /r ----> To find the which group policy is applying on user and computer object .
2.rsop.msc ----> There you can able to find the change has been applied or not .
3.gpupdate /force -----> Forcefully updating the group policy in a client machine
4.In gpmc.msc there is one option called group policy results .That option will be used for centralized management to find the policies that are applied to a user and computer account.
5.Just check the event viewer in all the PC'S for group policy related events.
Most importantly you need to make sure all the computer accounts are placed in an ou ,where the newly created group policy is applying and also make sure that OU doesn't contain any inheritance block.
Please feel free to reply me if you have any queries.
Thanks & Regards S.Nithyanandham

How to add hotmail to mail for Yosemite

how to add hotmail to mail for Yosemite

Mail/Preferences/Accounts - click the + sign and add the account.
Hotmail Settings See post by Csound1

Custom display template - how to add anothe display template for refimement item?

Custom display template - how to add anothe display template for refimement item?
I add a new filter_default_custom.html file and want to create new refinement item display template to point to it
keren tsur

Not 100% if I understood the question, but if you uploaded your template to the Master Gallery and the corresponding .js file has been created, you can open the refinement config panel and specify the result type you want to map to your custom template.
http://www.eliostruyf.com/part-1-create-first-search-refiner-control-template/
Kind Regards
Bjoern
http://www.sharepointviking.com
Twitter: Follow @bjoern_rapp

How to create a new Condition for tax as VAT ( 4 % ) in SAP ? .

Dear All ,
Pl guide that " How to create a new Condition for tax as VAT ( 4 % ) in SAP ? . What are all necessary requirements to do so , I need to have all steps so that i should feel very confident . For example what data is to be ticked in Control tab during cond. creation , in the same way how to put this cond. in Pricing procedure ? pl write all necessary thing which are required during this process .
Thanx & deep regrads to all in adv.
sap11

In tax we can configure taxprocedure two types i.e., taxinn and tainj. If you adopt taxinn procedure if it is other than VAT condition first you have to create the condition type and then you have to go to FTXP and assign the tax required VAT percentage to the repective % to ded or non ded VAT condion type. In second step you have to assign this tax code to respective company code.
If you adopt taxinj procedure you have to a create tax code with FTXP T-code by assigning the values to the respective and save conditions.
Regards,
Bhuvan

How to create new starting conditions for a workflow of shopping cart

Hi all,
How to create new starting conditions for a workflow of shopping cart
SATYA

Excecute SWB_COND
Creating New:
Click on Create button. If you cannot see that it could be a authorization issue
then Business Object: BUS2121
Double Click the event linkage for one step workflow
Define the expressions, Check Consistency and click on Traansfer
Start Condition is created. If it is not Active click on the Red Button to make it Active
Editing Already existing:
Click on Edit Button If you cannot see that it could be a authorization issue
then select Business Object: BUS2121
Click on the condition part (White area) of the start condtion needing editing
Change the expressions, Check Consistency) and click on Traansfer.If it is not Active click on the Red Button to make it Active

In 10.2 docucorp, how to add a manual condition for a group

Similar Messages

Maybe you are looking for