In a label to display a field and searchelp on it...

hi,
I want a label "color" in selection screen logic and wle running program once i get the input parameter color label and pressing f4 i need to get the values like red, blue,green etc....

hi
use this func module 'F4IF_INT_TABLE_VALUE_REQUEST'
and in tables option pass ur internal table with color names.

Similar Messages

Can one clip in a sequence have "display first field" and another one "display both fields"?

Is it possible that one clip in a sequence will have "display first field" and another one
"display both fields"?
My problem is that I have a split screen. One part is a clip of still
image with text and the text is seen good with "both fields" and a
little bit blurred with "first field". The second part is a PAL clip
and it is seen bad with "both" and good with "first".
The pixel-ratio is 1.094 for both clips. Playback resolution is "full".

I have an Eizo calibrated monitor.
Hooked up how? If in use as the main computer monitor, no this isn't sufficient. You need a real TV or production monitor connected via HDMI, component, S-video or the like, so that it displays only the video signal and no part of the Desktop.
(And if you're working in interlaced, it really needs to be a CRT that can properly display an interlaced signal.)

In XML Show Form display Creator FirstName and LastName ?

Hi all,
In XML Form Builder i want to display the creator FirstName and LastName ( Diamond Admin) in the Show Form.
For egs:
Logon ID: diamond_admin
Last Name: Admin
First Name: Diamond
In the EDIT Form By using $sap_user and also createdBy property i'm getting the creator name as diamond_admin but i want to display the FirstName and LastName (Diamond Admin).
2)In the EDIT Form i used the Label for Time Based Publishing(TBP)
Opening Date = TimeStamp control
Closing Date = TimeStamp control
In the RenderList Form i'm showing the Closing Date label its display the date and time.
Closing Date= 05/12/08 08:00:00 PM
But i requirement is to show the closing date only not time(Closing Date= 05/12/08) in the RenderListItem Form..
How to do this?Please help me...
Regards
Thillai J

When you are editing the Show Form, select the correct label in the form and in the property list area (bottom right) you have a property named "Display As". Select "Display Name" for the value.
Make sure that in your Data Model your property has the data type "user"
The "Display As" parameter should also work for your date problem as you can select "Short" to only display the date.

How to create a report in Form line Style and can display Image field?

Hi,
In Report builder 10g, I would like to create a Report with Form Line Style and this report included a Image field.
I can choose this Style only when Select Report type is Paper Layout. Because, If I choose Create both Web & Paper Layout or Create Web Layout only then in the next Style tab 03 option Form, Form letter and Mailing Label be Disabled.
But in Paper Layout, my report can not display Image field.
I tried with Web layout and all the other Styles (Except 03 mentioned be Disabled) then all Styles are displayed Imager field OK.
How to create a report in Form line Style and can display Image field?
I was change File Format property of my Image field from text to Image already in Property Inspector. But report only showed MM for my Image field.
Thanks & regards,
BACH
Message was edited by:
bachnp

Here you go..Just follow these steps blindly and you are done.
1) Create a year prompt with presentation variable as pv_year
2) Create a report say Mid report with year column selected 3 times
- Put a filter of pv_year presentation variable on first year column with a default value say @{pv_year}{2008}
- Rename the second time column say YEAR+1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)+1
- Rename the second time column say YEAR-1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)-1
Now when you will run Mid Report, this will give you a records with value as 2008 2009 2007
3) Create your main report with criteria as Year and Measure col
- Change the fx for year column as CAST(TIME_DIM."YEAR" AS INT)
- Now put a filter on year column with Filter based on results of another request and select these:
Relationship = greater than or equal to any
Saved Request = Browse Mid Report
Use values in Column = YEAR-1
- Again,put a filter on year column with Filter based on results of another request and select these:
Relationship = less than or equal to any
Saved Request = Browse Mid Report (incase it doesn't allow you to select then select any other request first and then select Mid Report)
Use values in Column = YEAR+1
This will select Year > = 2007 AND Year < = 2009. Hence the results will be for year 2007,2008,2009
This will 100% work...
http://i56.tinypic.com/wqosgw.jpg
Cheers

Can't get field labels to display above for multiple fields in one cell

I've tried searching for how to fix this to no avail. I'm new to Apex and I'm trying to get 5 fields on one line with labels above each: salutation, first name, middle initial, last name and title. I've set New Line and New Field to No for all but the first item. With the labels for each field set to Right, everything displays on one line. With the labels set to Above, fields are displayed on separate lines and I'm not sure why. There are other fields on the form as well but they are each on their own line. Any help would be greatly appreciated. My Apex version is 4.1.1.00.23. I'm running the standalone Apex Listener (current version from 7/12) with a 10g database.
Thanks

Hi,
have you tried to set New Field to Yes? If that doesn't work, a test case on apex.oracle.com would be great. That's the easiest way to show you how it works.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Coded UI: How to verify watermark displayed in the fields and Data grid?

Hi,
I've an requirement to verify watermark in the fields say username field displays "Username" water mark when no data is available in the field and water mark in data grid saying "No data available".
Please observe the water mark displayed in screenshot below:
So how to verify watermark?
Thanks & Regards,
Sunil
Best Regards, Sunil Email: [email protected]

Hello,
Depending on what form technology you are using, you can try posting to one of the following forums:
Windows Forms General
Windows Presentation Foundation (WPF)
ASP.Net forums
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How can I get text from a text field and display it in an alert?

Hello! I am BRAND NEW to Objective-C and Xcode and iOS, so PLEASE be forgiving of what is going to be a stupid question. I have a text field. I want to enter some text, click "return", and see my text in an alert. It doesn't serve any useful purpose, but this is how I learn. So far, I am unsuccessful. Here's my function from my HelloEarthViewController.m file:
-(IBAction)showInputMessageUITextField *)textField
if ([textField.text isEqualToString:@""])
    return;
UIAlertView *helloEarthInputAlert = [[UIAlertView alloc]
                                     initWithTitle:@"Name!" message:[NSString stringWithFormat:@"Message: %@", textField.text]
                                     delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil];
// Display this message.
[helloEarthInputAlert show];
Then I go option+click the text field and drag it to File's Owner and connect it to "showInputMessage:" Then I run it and the build succeeds, but nothing happens when I click my "return" button on the iPhone simulator.
What have I missed? Where have I gone wrong?

Okay, here's where I am. I have this in my view controller .h file:
@interface HelloEarthViewController : UIViewController <UITextFieldDelegate>
    IBOutlet UITextField *textFieldTest;
@end
And this in my view controller .m file:
-(IBAction)showInputMessage
    if ([textFieldTest.text isEqualToString:@""])
        return;
    UIAlertView *helloEarthInputAlert = [[UIAlertView alloc]
                                         initWithTitle:@"Name!" message:[NSString stringWithFormat:@"Message: %@", textFieldTest.text]
                                         delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil];
    // Display this message.
    [helloEarthInputAlert show];
And I have connected the text field to showInputMessage. When I hit "return", however, I still get nothing.
Is an "action button" a real button? From my limited understanding, the alert should launch when I click "return" since showInputMessage is attached to Editing Did End on the text field.
Thanks for the help. The transition from writing C# for web applications to writing Objective-C for iOS applications is not going as smoothly as I'd anticipated.

How to keep form field and label together?

In InDesign Creative Cloud (ID CC), I need to create a 20 page form (a type of questionnaire). As a prelude to doing this, I created a one page form. I am trying to keep labels (text) and fields together, so that if I add a question in the middle of the form, everything else moves down and stays in the correct alignment and relationship. Here is what I tried.
Option 1: Anchored Fields. I created fields on a "fields" layer and labels on a "text" layer. The text layer generally had tables to help me see where fields should be placed. However, to keep fields and text in the same relationship on the page, I anchored the field to the text. Hoewever, this has the effect of moving the field object into the same layer as the text. When I tried to use the Articles panel to put the fields in correct tab order, I discovered that only fields (unanchored) that were in the forms layer could be dragged into the Articles panel; anchored fields (now in the text layer) could not be dragged into the Articles panel. Why?
I know that I could also use the Object / Interactive / Set Tabs Order command, but I wanted to use Articles to see how that works.
In this approach, I also could not figure out how to put underline the text form field
Option 2: Tabs and Character Styles. I used character styles for underlining by not using tables, but using paragraphs and tabs to align where the fields should be. I applied a character style to a right-justified tab to get the underline. However, using this option, whenever I add a new question (field + label or instruction) in the middle of the form, everything else down on the page goes out of alignment.
What recommendations do other form designers have? I have been trying to think of how IRS has "dense" or "complex" forms, and how these might be designed in InDesign CC. in order to apply similar techniques to my form design.
I am running on a Mac, OS X 10.8.4, InDesign CC.

Unless I am gravely mistaken, isnt this what you want?
for (int i = 0; i < folderList.size(); i++) {
   String folder = (String) folderList.get(i);
    System.out.println("Folder: " + folder);
    System.out.println ("Messages: " + folderMap.get (folder));
}

AT1 field not display in MIGO and J1IEX

Hi Experts,
i am using Secondary higher cess amount it will display AT1 Field wise configured. but i do not get this field in MIGO and J1IEX.
what i am doing
Reg
Kishore

Check Note 926707.It will hopefully solve your issue
Regards,
Indranil

Regarding MV45AOZZ and MV45AIZZ, using these includes display the fields

Hi,
using the MV45AOZZ and MV45AIZZ includes i have to display some fields in display mode even in chage mode.
The requirement is to make certain fields display only. This would prevent certain users ( SPOC ) not to edit or change these fields without interacting with the OTS team.
SPOC users would go into orders in Change mode and make changes for manual allocation like changing the plants or the Schedule line dates.
Field which need to be in display mode in order change model
Bill to Address ,
Ship to address,
Pricing screens
Payment Terms
Freight terms -
how to do this ?? very urgent.. thanks in advance

Do as below:
1. Insert a module with pattern ZZ* in the PBO flow logic of the respective screen.
2. Create these modules in the programs you mentioned.
3. For disabling field in a screen, code shld be like:
   loop at screen.
     if screen-name = <screen fld>
        screen-input = '0'.
        modify screen.
        exit.
     endif.
   endloop.
Regards
Eswar

I have two fields and I would like the 2nd field to display the word "Error" if the number is smalle

I have two fields and I would like the 2nd field to display the word "Error" if the number is smaller than the number in field 1.
can any one help?

The code for the field? Sure, it's simple.
You can use something like this as its custom calculation code:
var v1 = this.getField("Field 1").valueAsString;
var v2 = this.getField("Field 2").valueAsString;
if (v1 && v2 && Number(v2)<Number(v1)) event.value = "Error";
else event.value = "";
Edit: Fixed code

How to display attachments as a field and not in message body

I'd like to attach files in Apple Mail through the use of an attachments field (a la Outlook/Entourage) rather than it being shown as an icon in the message body, but I can't seem to find out how to do it.
I'm pretty sure it can be done as it's displayed in Lokisoft's 'Without Attachment Tamer screenshot' (top left image) http://lokiware.info/Attachment-Tamer .
Any bright ideas? Nothing in the GUI seems to help and Apple Tech Support won't divulge a terminal command I can use to expose the attachments field.

Right click the department name column and go to format field and select supress if duplicate...this will remove duplicates
to get it displayed in each page
create a formula say F1 and place the column inside the formula
and conditionally supress for each page
This may help
Thanks,
Ganesh

SAP MDM DISPLAY FIELD AND UNIQUE FIELD DIFFERENCE

Hi All
I am new in MDM, can any body please help me understand...
What is the difference between display field and unique field?
Besides to consider one field to be a key in a lookup table, how should we declare that field in the table, as a display field or as an unique field?
It would be helpful if someone kindly explain this to me.
Thanks in advance.
Santanu Ghosh

Hi Santanu,
To explain you the difference in Display field and Unique filed as in MDM in a prescise manner:
Display field:
Every field you create under your main table ie Product atbel will be a displayed field in MDM data manger irrespective of you making it as display or not in Console.
It means two things
1) That this field will be visible in MDM data manger.
2) This field will be visible in Import Manager for Mapping.
But in case of lookup field you need to make the fields as dispaly or not,if you wish to see them in import manger.
If you do not make the fields in a lookup table as dsipaly then even though you can see them in MDM data manger you will not be able to see them in Import amnger as a result not be able to map them.
Unique Field:
When you make any field as unique it maens taht MDM will not allow you to add two values under this field with the same value.
Eg:You acnnot add two materials with material no 100.
Hope it helped
Kindly reward points if found useful
Thanks
Simona

I want to display some fields using the BDC and i want to know thruogh whic

I want to display some fields using the BDC and i want to know thruogh which transaction these fields are displayed.Could you please help me out.

You can use JFreeChart which is a free and good tool to generate graphs in Java. It has samples and other guides which you can use to get started...

How to disable the input fields and labels.

Hi,
I have a requirement, when i click on button all the fields and labels in the form will be disable .

Hi,
You code wizard, in popup select set radio button and select the attribute and click on Ok, It will generate code automatically. Else find the below code
DATA lo_el_context TYPE REF TO if_wd_context_element.
lo_el_context = wd_context->get_element( ).
CALL METHOD lo_el_context->set_attribute
EXPORTING
name = `DISABLE` " Here disable is the name of attribute which u created in context of type wdy_boolean
value = 'X' .
Hope this helps u.,
Thanks & Regards,
Kiran.

In a label to display a field and searchelp on it...

Similar Messages

Maybe you are looking for