In a process chain,the next process is not triggering automatically?

Hi All
We have have a metachain,in that we have many local chains,in one of the local chain once the above process is successfully completed then the next process is not triggering automatically,which should suppose to happen?
Can anyone help me out why this process is not triggering automatically and how/where to check?
As this problem is repeating daily and loads are delayed due to this
Regards
Balji

Hi,
you can manually start that job, by changing the job insm37, it will show you the job priority ( A OR C.) you can change it to A, and youc an change your start condition also there.
or you can use this RSPC_PROCESS_FINISH to trigfer process.
But, process chain processes should be triggered automatically, i think this issue is due to load of jobs ( in your server there should be lot of jobs having higher priority than this job), this will solved automatically when load is less.
hope this will be helpfull.
v.sen.
Message was edited by:
Senthilkumar Viswanathan

Similar Messages

Process chain stops - previous processes are green

Hi All,
We have a process chain that loads our master data each night. It chain is mostly made up of infopackages (mostly full loads) and the change run for those objects. We recently upgraded from 3.5 to BI7, SP16.
Since the upgrade, this chain, and a few others just seem to stop. They will start, and successfully complete some of the processes in the chain (all green), but then will not move on to the next process. The next process will not be yellow, it just won't start. The overall status of the chain is yellow.
I am 100 percent sure there are no other chains running during this time frame. This chain has been running for over 4 years in production, and we have never encountered this issue.
Last night, I removed the chain from the schedule, and then rescheduled. I'm not sure if that is going to prevent us from having this issue. I have also set the priority to high.
Should this prevent us from encountering this issue again? I have searched OSS and found some related notes, but we are on a higher support pack than what is in the notes, so they are already applied.
Any suggestions?
Thanks!
Charla

The first thing that I'd recommend is to look at the Start Process Variants for the Process/Local Chains that are not starting. Specifically, I would check to see if the scheduling in those Start Process Variants are set to Direct Scheduling with Immediate Start or set to Start Using Meta Chain or API. It is possible that the conversion from BW 3.x to BW 7.x change the parameters of the scheduling withing the Start Process Variants, even though they were not physically changed and transported.
My recollection is, when we upgraded Support Package Stacks, we had some Local Chains just change on their own where the Immediate Start checkbox mysteriously become unchecked.

Event triggering fails to start the next process chain

Hi
I have two process chains A & B
At the end of process chain A i am triggerring the an event which is the start condition for process chain B.( periodic )
Now when i debug my process chain A , i see the event is triggered successfully but inspite of that the next process chain does not start.
Does anyone faced similar problem? Its little urgent. Any clue would be useful.
Regards
Purva

HI,
In addition to the above comment also see if you have given the event name correctly and try to see if you can run the PC by triggering the event manually (Tcode: SM64)
Assign points if helpful.
Rgds,
Kalyan

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi,
I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
Regards,
Arminder Singh

Pointers for optimizing system performance (run time) while running DP process chain with parallel processing

Hi Experts,
We are running APO DP process chain with parallel processing in our company, we are experiencing some issues regarding run time of process chain, need your help on below points;
- What are the ways we can optimize process chain run time.
- Special points we need to take care of in case of parallel processing profiles used in process chain.
- Any specific sequence to be followed for different processes in process chain - if there is some best practice followed.
- Any notes suggesting ways to improve system performance for APO version 7 with different enhancement packs 1 and 2.
Any help will be really appreciated.
Regards

HI Neelesh,
There are many ways to optimize performance of the process chains (background jobs) in APO system.
Firstly I would recommend you to identify the pain areas (steps) which are completing with more runtimes. Then each one of the step has got different approaches to decrease the runtime.
Like you may end up with steps like infopackage executions, DTPs, DP mass processing jobs etc which might be running with more runtimes. So now target each one of them differently and find out the ways to optimize. At the same time the approach you follow should be technically possible with basis perspective (system load and utilization) as well.
And coming to parallel processing, you can use parallel processing for different for different jobs. You can further r explore on the same using parallel processing. Like loading an infocube, mass processing, infopackage execution, DTP, TSCOPY etc.
Check the below link for more info
Performance problems in DP mass processing
Let me know if you require further info.
Regards,
Raj

How to invoke an other BPM asynchronous process from the BPM process

Do anyone know how to invoke other asynchronous process from the BPM process without using the Web Service URL?

Try using a Service task implemented as a Process Call. Then you select the process you want to call, set the associations or transformation and deploy it to test.
I hope it works for you.
isabelbernely

I have nine, 1-page PDF files that are accessible and need to combine into 1 PDF file. I have tried appending, adding and the combine PDFs process. The file created is not keeping my changes. The created file is partially accessible but I have to re-fix

I have nine, 1-page PDF files that are accessible and need to combine into 1 PDF file. I have tried appending, adding and the combine PDFs process. The file created is not keeping my changes. The created file is partially accessible but I have to re-fix issues I had fixed in the single files. I need suggestions on what else can be done if any. Using Acrobat pro XI.

Out of habit, I tend to combine PDF files in the Page Thumbnails pane by right-click then "Insert Pages" -> "From File". For me, this preserves the tags from both documents, although the tags may have to be moved into the right location (if I recall correctly the tags for the inserted pages get put at the end of the tag structure, regardless of where the pages are inserted), If I first put the tags for the document to be inserted inside a container tag like Section, it makes the process easier. Moving that set of tags to the right place is the only re-fixing that I recall having to do. What behavior are you experiencing?
a 'C' student

"Could not initiate the BPEL process because the input xml is not well form

hi all,
i am new to BPEL and tring to create a BPEL WebServices. now i got struck up with one issue like below
"Could not initiate the BPEL process because the input xml is not well formed, the reason is : Error parsing envelope Please correct the input xml."
But according to BPEL compiler there are no errors in the design and deployment as well. when i tries to initiate the deployed WS i am facing the above issue.
can anybody help me to fix this issue. Thanks in advance.
Regards,
Kalyan

hi' Kalyan,
The issue seems to be due to XSD file which you are importing while making the new BPEL process,
the XSD file is very sensitive even a simple upper case will create error, XSD file are many times used when you want
to pass some entries to be updated in the database.
use this XSD file:"discountflow.xsd"
<schema attributeFormDefault="qualified"
elementFormDefault="qualified"
targetNamespace="http://www.autoloan.com/ns/autoloan"
xmlns:tns="http://www.autoloan.com/ns/autoloan"
xmlns="http://www.w3.org/2001/XMLSchema">

<element name="Order" type="tns:OrderType"/>
<complexType name="OrderType">
<sequence>
<element name="orderid" type="int"/>
<element name="tenantid" type="int"/>
<element name="orderstatusid" type="int"/>
</sequence>
</complexType>
</schema>
<complexType name="Discount">
<sequence>
<element name="approval" type="boolean"/>
<element name="discount" type="int"/>
<element name="quantity" type="int"/>
</sequence>
</complexType>
</schema>
-Yatan

Could not initiate the BPEL process because the input xml is not well forme

Your test request generated the following exception/fault:
Could not initiate the BPEL process because the input xml is not well formed, the reason is :
Error parsing envelope: (2, 152) Invalid char in text. Please correct the input xml.
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body xmlns:ns1="http://xmlns.oracle.com/RO_Update2">
<ns1:RO_Update2ProcessRequest>
<ns1:UserName>operations</ns1:UserName>
<ns1:Responsibility>Depot Repair Engineer</ns1:Responsibility>
<ns1:API_VER>1.0</ns1:API_VER>
<ns1:P_commit>T</ns1:P_commit>
<ns1:init_msg>T</ns1:init_msg>
<ns1:Org_ID>207</ns1:Org_ID>
<ns1:R_Number>10782</ns1:R_Number>
<ns1:R_Status>1008</ns1:R_Status>
<ns1:Obj_Ver_No>1</ns1:Obj_Ver_No>
</ns1:RO_Update2ProcessRequest>
</soap:Body>
</soap:Envelope>

Try
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<ns1:RO_Update2ProcessRequest xmlns:ns1="http://xmlns.oracle.com/RO_Update2">
<ns1:UserName>operations</ns1:UserName>
<ns1:Responsibility>Depot Repair Engineer</ns1:Responsibility>
<ns1:API_VER>1.0</ns1:API_VER>
<ns1:P_commit>T</ns1:P_commit>
<ns1:init_msg>T</ns1:init_msg>
<ns1:Org_ID>207</ns1:Org_ID>
<ns1:R_Number>10782</ns1:R_Number>
<ns1:R_Status>1008</ns1:R_Status>
<ns1:Obj_Ver_No>1</ns1:Obj_Ver_No>
</ns1:RO_Update2ProcessRequest>
</soap:Body>
</soap:Envelope>

Error in GP: The next activity is not yet available: try again later...

I am receiving the following error in Guided Procedures: The next activity is not yet available: try again later using the "Refresh" button.
Here is my scenario:
I have a Guided Procedure where all of the activities are executed by the process initiator.
In the first step of the Guided Procedure, I run an Action called 'Read Document'.
The Action is set up as follows:
Callable Object for Execution: Read Document
Callable Object for Display: Read Document
Since this action doesn't do anything except display a document, I have defined the same callable object for both execution and display.
After the user clicks the Complete button, the Guided Procedure moves to the next step as expected. However, if the user returns to the activity that they just completed (because maybe they want to read the document again), I receive the following error message: The next activity is not yet available: try again later using the "Refresh" button.
What is causing this message and how can I get rid of it?
Thanks.

please help me!!!!!!!!!!!

The next activity is not yet available: try again later using the "Refresh"

Hi .
I am working on a resignation application which is having 2 level GP approval . After creating a resignation request by
an Employee when reporting manager is going to approve the request at that time I am getting this message
The next activity is not yet available: try again later using the "Refresh" button
Can you please suggess me why I am getting this message,and how I can resilved this problem.
Thanks for your valuable time.
Regards.
Abhishekh singh
Enteg Infotech Pvt Ltd.

Hi Tushar.
Thanks to help me .
Actually my problem is the refersh message is coming after action complete in GP.
Even after action complete the process moving correctly to the next level.
But I am getting the Refersh Button.
This is started after patch apply on Portal.
currently I can see patch 17 on portal.
Kindly help me in this regard how I can resolve this issue.
Thanks & Regards.
Abhishekh Singh
Enteg Infotech Pvt Ltd.

IPhone 5. Prior to the iPhone 5, I could listen to podcasts one after the other without doing anything. Now it will only play one podcast at a time, then I have to click on the next one. Not a great feature when driving. TIA, Sarah

iPhone 5. Prior to the iPhone 5, I could listen to podcasts one after the other without doing anything. Now it will only play one podcast at a time, then I have to click on the next one. Not a great feature when driving. TIA, Sarah

How do I get it to just play through all the podcasts that I've downloaded just like my 1st gen?
Group and order your podcasts to a playlist. Then play them from the playlist.

Day View in calendar Component showing the next at times not everytime!

Day View in calendar Component showing the next at times not everytime! My question is when we go to Day view which day does it show? is it Server day where the application reside or the machine time zone day ?

I think you want to know, days & time picked by which machine, locally or from server? It does take from server where the application is running.

Billing document cancellation (VF11) the cancelled doc. is not getting automatically cleared against the actual billing doc.

Hi All,
In case of billing document cancellation (VF11) the cancelled doc. is not getting automatically cleared against the actual billing doc. no. Each time user has to clear the doc. manually. We have observed this issue after recent patch updation dated 22nd Feb’2014. Till 21st Feb’2014 the cancelled doc. has been cleared automatically against their respective billing documents.
Please guide.
Thank you.

Hi Gopi,
Please chheck SAP Note No. 1259505. It explains two ways in which SAP releases cancellation documents to FI.
OSS NOte 1259505 lists the possible causes from SD side &
OSS Note 309208 lists the possible causes from FI side.
Regards,
Kavita

When I print to PDF using Acrobat 11 Pro from any application the acrobat Reader does not launch automatically. Associations are correct. Thx for your help, Bruce

When I print to PDF using Acrobat 11 Pro from any application the acrobat Reader does not launch automatically. Associations are correct. Happens from Chrome, IE, Word, Excel, Powerpoint. Previously had deskPDF installed but uninstalled correctly. Can't find a preference setting for the auto launch. Thx for your help, Bruce

A simple way is to flatten the form fields, which converts the field appearances to regular page contents. You can do this with JavaScript or PDF Optimizer (Advanced > PDF Optimizer > Discard Objects > Flatten form fields). A very nice script that adds a custom menu item can be found here: http://www.uvsar.com/projects/acrobat/flattener/

In a process chain,the next process is not triggering automatically?

Similar Messages

Maybe you are looking for