In BAPI creation iam getting some problem plz help me in this issue?

Hi All
    I am new to BAPI.
    I did one program by watching the below link
    http://www.saptechies.com/step-by-step-procedure-to-create-bapi/
    By watching that tutorial iam able to develop up to the creation of BAPI.
    While the releasing of my BAPI object its showing the following error
    Released object types must be transportable.
    While the releasing the method its showing the following message
    Object type components have higher release level than oject type.
    If any one knows how to resolve this issue please help in this topic
    Thanku.
Regards,
K.S.L.Neelima.

Hi Neelima,
As the error message shows: Released object types must be transportable
This means you have saved the object type also as local object under $tmp. You should not do this. Create the object type under any dev package and then try releasing it. This will work for sure.

Similar Messages

Very URGENT:am not able to log in to my account on installation of OSX lion...tried to resolve this issue by calling apple support centre ,but was left in vain...am not able to access my documents nor do any work...plz help me resolve this issue asap...

am not able to log in to my user account after installation of OSXLion,have called up the support centre many times,but was left in vain ...i belief its a simple problem ,but why is apple support center not able to help me out ...have given them all the required information with respect to everything...somebody plz help me to log in as am not able to access my docs and do any work...

My phone works all fine when am in mumbai but as soon s i leave mumbai I am not able to make an otgoing call
This is entirely a carrier issue. If your carrier (airtel) doesn't provide service outside of Mumbia, this has nothing to do with your iPhone.
i feel i need to change my brand
This is a user-to-user tech support forum, not Apple. No one here cares at all about your threats.
NEVER post personal info in this public forum

HI, Unable to connect Visual administrator plz help me to this issue.

Installed SAP XI System every thing is fine except visual administrator,i am getting following error,
unable to lookup connection default.
http://sap:8101/msgserver/text/logon returned list of connection parameters

Hi-
You can use the template installer to do the post installtion for XI
To start Visual administrator execute the go.bat file.
You can find this file in j2ee admin folder.
J2ee+ ABAP Engine
C:\usr\sap\<SAPSID>\DVEBMGS<xx>\j2ee\admin\go.bat
J2EE Engine
C:\usr\sap\<SAPSID>\JC<xx>\j2ee\admin\go.bat
So here you can log on to Your Visual Administrator.
Check out this link its helpful
http://help.sap.com/saphelp_nw2004s/helpdata/en/98/fa9b6ec510404dbcfebf35cb107c04/frameset.htm

Hai GURU 's plz help me in this Issue !

Hi
Guru !
Please let me know what is the difference between Subsequent Debit Note and the debit note.
Thanks in advance
GURU.

Hi,
Debit Memo - It is a sales document used in complaints processing to request a debit memo for a customer. If the prices calculated for the customer were too low, for example, calculated with the wrong scaled prices, you can create a debit memo request. The debit memo request can be blocked so that it can be checked. When it has been approved, you can remove the block. It is like a standard order. The system uses the debit memo request to create a debit memo.
Credit Memo - A transaction that reduces Amounts Receivable from a customer is a credit memo. For eg. The customer could return damaged goods. A debit memo is a transaction that reduces Amounts Payable to a vendor because, you send damaged goods back to your vendor.
Credit memo request is a sales document used in complaints processing to request a credit memo for a customer. If the price calculated for the customer is too high, for example, because the wrong scale prices were used or a discount was forgotten, you can create a credit memo request. The credit memo request is blocked for further processing so that it can be checked. If the request is approved, you can remove the block. The system uses the credit memo request to create a credit memo.
As mentioned above, creating a credit or debit memo request enables you to create credit or debit memos based on a complaint. For this first create a sales document with the order type for a credit or debit memo request. You can create the debit or credit memo requests in the following ways:
Without reference to an order
With reference to an existing order
Here you enter which order the complaint refers to.
With reference to an invoice
Here you enter which invoice the complaint refers to.
In all cases, you specify the value or quantity that should be in the credit or debit memo
You can block the credit or debit memo request from being billed in Customizing. Go to Sales -> Sales Documents -> Sales document header -> Define sales document type and select the billing block field in the billing section. This request can later be reviewed along with similar ones, - if necessary, by another department. The request for a credit or debit memo can then be approved or rejected
Assin Points
Z

DC creation finished with some problems

Hello,
After finish the DC creation below message is getting
DC Creation finished with some problems
Reason: Some used DC's not avilable Locally, You Have to sync used DC's for the project.
and when I open the view implementation many errors in the default methods.
below is the error log:
java.lang.Exception: C:\Users\xxxx\.dtc\LocalDevelopment\buildvariant.config is missing
at com.sap.ide.eclipse.component.core.Util.getBuildVariantDocument(Util.java:205)
at com.sap.ide.eclipse.component.core.Util.initBuildVariant(Util.java:261)
at com.sap.ide.eclipse.component.devconf.DevConfManager.getInstalledDevConfs(DevConfManager.java:432)
at com.sap.ide.eclipse.component.devconf.DevConfManager.getInstalledDevConfs(DevConfManager.java:372)
at com.sap.ide.eclipse.cbs.activation.internal.ActivationRuntimeDataStorage.setActiveDevelopmentConfiguration(ActivationRuntimeDataStorage.java:225)
at com.sap.ide.eclipse.cbs.activation.internal.ActivationRuntimeDataStorage.onActiveClientChanged(ActivationRuntimeDataStorage.java:944)
at com.tssap.dtr.client.lib.vfs.config.impl.Configuration.setActiveClient(Configuration.java:477)
at com.sap.ide.eclipse.component.wizard.DevConfWizard.updateDTR(DevConfWizard.java:687)
at com.sap.ide.eclipse.component.wizard.DevConfWizard.addDevConf(DevConfWizard.java:546)
at com.sap.ide.eclipse.component.wizard.DevConfWizard.access$100(DevConfWizard.java:67)
at com.sap.ide.eclipse.component.wizard.DevConfWizard$1.run(DevConfWizard.java:348)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at com.sap.ide.eclipse.component.wizard.DevConfWizard.performFinish(DevConfWizard.java:346)
at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:608)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:321)
at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
at org.eclipse.jface.window.Window.open(Window.java:563)
at com.sap.ide.eclipse.component.provider.actions.DevConfNewAction.run(DevConfNewAction.java:46)
at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:229)
at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1391)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Thanks
Polaka

Hi Polaka,
the Error clearly tells the root cause...
Some used DC's not avilable Locally, You Have to sync used DC's for the project.
This means that the DC for which you have created project structure is now present on your Local client DTR, but the same DC is using some other DCs as dependencies. And these used DC(s) are not available on your Local Client DTR.
Please perform the below mentioned steps...
1) The DC for which you are creating the project structure, is having dependecies on other DCs.
2) Open the public parts of that DC and check the Used DCs that are needed.
3) You need to create the project structure of those used DCs too from Inactive DCs view.
4) Also make sure that buildtime depencies are also sychronized from Active DC view.
If the problem still persists, then i would request you to provide the following details.
1) Types of the DCs that you are using.
2) in the CBS web UI,
-->(http://<host>:<port>/webdynpro/dispatcher/sap.com/tc.CBS.WebUI/WebUI)
-->Here, find out the build spaces specific to your track inside Buildspaces Table.
<SID>_<TrackName>_D
check the Development buildspace of your track whether it is consistent or not?
3) If the build space is having some broken DCs then provide the Logs of the Build failure on CBS for those broken DCs.
Regards,
Shreyas Pandya

Audio Clip problem plz help..

There is some problem with my code. It is actually for simply playing a wav file.
It gives errors on two lines....
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
public class MediaPlayerDemo extends JFrame
     AudioClip clip; //Error Here
     public MediaPlayerDemo(String title)
          super(title);
     clip = getAudioClip(getCodeBase(),"access.wav"); //Error Here
     clip.loop();
     public static void main(String args[])
          MediaPlayerDemo m = new MediaPlayerDemo("Title");
          m.setSize(400,400);
          m.setVisible(true);
}

"Audio Clip problem plz help"
You have to learn to help yourself.
Have you done anything to try to fix the errors yourself?
AudioClip clip; //Error Here
the error generated here is self-explanatory.
if you can't fix this, you should get a good book on java basics and start again.
the other error is also easy to fix.

I purchased my iPhone from UK which is unlocked but Now I am back to My Origin i.e INDIA and unfortunately my iPhone Display get damaged and Now I have to Repair it but..... The Problem is "iSTORE in India Doesn't Helping me in this issue"

I purchased my iPhone from UK which is unlocked.
But Now I am back to My Origin Place i.e INDIA.
And unfortunately my iPhone Display get damaged.. and Now I have to Repair it but.....
The Problem is "iSTORE in India Doesn't Helping me in this issue".
I would request APPLE please get this FIX as I am also your customer and now it is globalization.
SO please find any way to get this fixed...
Apple Customer care Please send me any Services note That I can show to iStore in India i.e (In Korum mall Thane, Mumbai, Maharashtra, India )
So I can get my dispaly fixed in INDIA itself.
Requested to please help me out of this issue..
Thanks
APPLE user
sonu.mas007

They can provide some kind of way towards this solutions...
eg:
1) Accept my UK iPhone in India courier it to Purchased Place (Repaired it)
2) Accept my UK iPhone in India Take some difference assign me India iPhone.
3) Accept my UK iPhone in India give me any option to ugreade to iPhone 5 (Indian).
4) Accept my UK iPhone in India give me some Receipt (Courier me My new iPhone from UK).
5) Approve my VISA for going to UK again as it not easy for INDIAN to go there with some kind of this Reason.
6) Give the Postal Address where we can send our APPLE to get only Service and they can send it back to us if it got reparied.
As no one would like to go UK only to Purchase APPLE..
There are some personal reason they have to go to Other countries for ... and If some one is FAN of APPLE like me would do the same mistake that I have done..
7) If the APPLE wanted to serve their customer they would have get to the solutions with their excellent mind.
As far as I am concern I am just the USER of my FAV APPLE but.. .. I guess this policy would not keep me as the SAME FAN of APPLE as I am now...
If this is not going to get solved I guess I have to start with other BRAND Like SAMSUNG S4 where I can get everything in my STATE..
But YEH it not a right was to have this BAD policy.
I just dont know why they are not coming ip with great solution for this issue in this tecnology world.
Any help to find other BEST Brand who has awesome services..

I have recently updated m iPhone 4 which was not used since months. It has to be updated from5.1.4 to iOS 7.0.4 and it has taken more than 15 hours to get started. Plz help me. It took about 5 to 6 hrs to prepare for updating.

I have recently updated m iPhone 4 which was not used since months. It has to be updated from5.1.4 to iOS 7.0.4 and it has taken more than 15 hours to get started. Plz help me. It took about 5 to 6 hrs to prepare for updating.

I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems.

Classpath problem plz help me

hi!
i am unable to run my RMI server program .Name of My server class is SumServer.java,it implements SumInterface.java all the files(.class,.java and stub) are at location c:\javaprog\rmi\sum.
I have not put them in any package.
value of classpath is
classpath=c:\jdk1.4\lib;.;c:\javaprog\rmi\sum
i go in sum folder and run the program
c:\javaprog\rmi\sum > SumServer
it gives me following exception.plz help me out.
Thx in advance.
Exception occur.Unable to register serverjava.rmi.ServerException: RemoteExcepti
on occurred in server thread; nested exception is:
java.rmi.UnmarshalException: error unmarshalling arguments; nested excep
tion is:
java.lang.ClassNotFoundException: SumServer_Stub

Deepa lakshmi wrote:
Hi,
Am new to weblogic.
Am using the tools are,
Weblogic8.1 version
MySql5.0,mysql-connector-java-3.1.12-bin.jar file
While test configuration of connection pooling am getting the error is "JDBC Driver is not on the classpath".
How can i solve this problem
plz help me
regards
DeepaEdit the start-weblogic script. Near the bottom, you will see
lines that create a CLASSPATH for the weblogic server. Add a
script line that adds the mysql driver to the classpath there.
Joe

Well i set a passcode on my iphone 4 and ive forgotten it i have no idea what to do and i only just got this phone plus i dont want to do these bypassing with emergancy call just in case i get it wrong plz help (urgent)

well i set a passcode on my iphone 4 and ive forgotten it i have no idea what to do and i only just got this phone plus i dont want to do these bypassing with emergancy call just in case i get it wrong plz help (urgent)

If you set the phone to erase on 10 failed passcodes - then just keep typing and it will wipe itself.
Otherwise I believe you can set it to recovery mode and restore etc.. via iTunes... There is no easy way as the passcode is designed to protect the phone exactly against what you are trying to do now...
http://osxdaily.com/2011/01/08/iphone-recovery-mode/
Others may have some additional tips !
Sorry for the probs you are having...
Regs Neil

TS3074 im can u please help me out this issue im trying to install iTunes in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

im can u please help me out this issue im trying to install iTunes in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

Try the following user tip:
" ... A DLL required for this installation to complete could not be run ..." error messages when installing iTunes for Windows

Package Problem : Plz help

I've make two classes named First.java and Second.java in e:\javafiles\test\vg folder
package vg;
public class First
          public int m = 100;
          public int n = 200;
package vg;
public class Second
          public static void me0()
               System.out.println("Stupid cant u see the value of m is zero");
          public static void mgrn()
               System.out.println("Yaar m is greater than n");
          public static void neven()
               System.out.println("The value of n is Even");
and a Third class
import vg.*;
public class Last
          public static void main(String robert[])
               Second d = new Second();
               First f = new First();
               if(f.m==0)
                    d.me0();
               if(f.m>f.n)
                    d.mgrn();
               if((f.n%2)==0)
                    d.neven();
               else
                    System.out.println("The value of n is Odd");
Now the problem is that if I put the Last.java at e:\javafiles\test and compile it , it works fine but if I put the Last.java anywhere else e.g at e:\javafiles and try to compile it it does not works and gives error
E:\JavaFiles>javac Last.java
Last.java:1: package vg does not exist
import vg.*;
even if I change classapth variable as E:\javafiles\test or even E:\javafiles\test\vg
plz help me in this regard

You need to change where it is trying to find the 'vg' package. So, if your Last.java is in e:\javafiles, then you need to
import test.vg.*
e.g.
import test.vg.*;           // Change this line
public class Last
          public static void main(String robert[])
               Second d = new Second();
               First f = new First();
               if(f.m==0)
                    d.me0();
               if(f.m>f.n)
                    d.mgrn();
               if((f.n%2)==0)
                    d.neven();
               else
                    System.out.println("The value of n is Odd");
Alan

Cartridge problem plz help

the printer display reads at least on of the cartridges a problem. after carfully cleaning, reinserting new cartriges, and even resetting the printer it continutes to read the same message and wont allow me to print or use the device. i need this printer for work so i need help fixing this as soon as possible.

Hi @sjhen ,
I see that you are experiencing issues with a message that one of the cartridges is having a problem.I would like to help you resolve this issue.
I would do a hard reset. Unless this is the way you already did the reset. Please try it.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Try these documents to see if it will help resolve the issue.
Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Officejet 4630 and Deskj...
A 'Cartridge Missing,' 'Cartridge Problem,' or 'Incompatible Ink Cartridges' Error Message Displays ...
Are you using Genuine HP Cartridges?
What are the ink levels?
Please call our technical support at 800-474-6836 if the issue persists. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Plz help selection screen desplay issue

Hi experts
plz help
small query
i have two fields
dateto and date from in my selection screen
i ill have to use parameter for both the feilds i cannot use select-options here
but wen i m using parameter its coming line by line
like
p_dateto    "i/o feild"
but i want like we get in select option
p_dateto    "i/o feild"           p_datfrm     "i/o feild"
plz help me doin this .
thanx i9n advance.

hey,
why dont u use select-options?
but if u want parameters only,
u can do like below.
selection-screen begin of screen <scrno>.
selecion-screen begin of line.
parameters: date_from type sy-datum,
date_to type sy-datum.
selection-screen end of line.
selection-screen end of screen <scrno>.
Message was edited by:
        Hymavathi Oruganti

In BAPI creation iam getting some problem plz help me in this issue?

Similar Messages

Maybe you are looking for