In debuging "Smart Data" tab don't show value

Hello Exparts,
SQL Developer version 4.0 Build MAIN-13.80
when i run my code in debuging for example procedure, Smart Data tab don't show the value. But Data tab show value.
In earlier version it's working fine.
Looking for your inputs.
Ask2Learn.

Thanks Jeff, for your reply.
so, its a BUG. ?
So, we will get it working in next build, soon. Its very useful.
Thanks again.

Similar Messages

  • VA01 creation of new feild in Additional data tab B and populating values

    Hi All ,
           I had created  a new field zzordqty in VA01 item level -> additional Data  Tab B  SE51 -> SAPMV45A-> 8459.
          The values while creating a sales order are coming from Inbound FM Idoc_input_orders .  for this particular field the value is stored in segment E1EDP35 when QUALZ is 011 the value of CUSADD is to be shown of the screen of VA01.
          For this I had tried to create a enhancement point in FM Idoc_input_orders , and tried to capture the value of CUSADD into XVAP-ZZORDQTY .
           But as soon as i come out of the enhancment point the value of XVBAP-ZZORDQTY BECOMES 0 .
           And at the screen level of SAPMV45A i had created a PBO and transfered the values from XVBAP TO VBAP .
            But since the values are getting cleared , the value of zzordqty is zero and also niether it s getting updated at table level .
            I request to let me know , how should i proceed further , either to use exists or badi's
    Thanks & Regards,
    Kavitha

    hi,
    you can do it in include MV45AOZZ. the method should be for module in PBO of subscreen 8459.
    and ifyou are not able to pass it to any standard structures( like xvap, or vbap or some thing like that) you can export it from PBO or PAI module) and catch it in the save exits (user exits)
    Edited by: Soumyaprakash Mishra on Oct 2, 2009 11:08 AM

  • After installed DMO of Campus, installing SYS , data mover don't show PeopleSoft HRCS Database

    Hello  every one, I've made the installation of PeopleSoft Campus (DMO) instance and it's running right now. After that I began the installation of the SYS instance, using the same servers: Oracle Linux (database), Oracle Linux (Application Server), Windows Server (1 machine) for Installation & Crystal Reports.
    I created a new database named HRMS9SYS without errors.
    Now its time to work with Data Mover. The first task is to use de database Wizard.
    Select target database ORACLE
    database type    UNICODE
    character set AL32UTF8
    And in the next step Peoplesoft Applications to Add
    I can only see People Tools System Database US-English
    ¿Can someone explain why there is not PeopleSoft HRCS Database - English and PeopleSoft HRCS Database - Spanish?
    Theese are the same files with wich I installed the DMO instance...

    Yagu,
    1) Be sure the PS_APP_HOME variable is pointing to the right directory where HCM has been installed (check within ConfManager/Profile (Default)/Edit/ProcessScheduler tab).
    2) Be sure you checked the "Peoplesoft HCM Database" checkbox during the application installation. Open the log file HCM_InstallLog.log in the directory where you installed the application.
    You may have something like this:
    CHOSEN_FEATURE_LIST=PeopleSoft HCM Demo Database
    CHOSEN_INSTALL_FEATURE_LIST=PeopleSoft HCM Demo Database
    CHOSEN_INSTALL_SET=
    => this means only Demo is installed and you cannot go for something else (except for Peopletools system database which you don't want).
    If you have a long list of features, be sure there is something like this :
    CHOSEN_FEATURE_LIST=PeopleSoft Absence Management,<...snipped for reading, this is the list of the features you checked when installing HCM...>,PeopleSoft HCM Demo Database,PeopleSoft HCM Database
    CHOSEN_INSTALL_FEATURE_LIST=PeopleSoft Absence Management,<...snipped for reading, this is the list of the features you checked when installing HCM...>,PeopleSoft HCM Demo Database,PeopleSoft HCM Database
    CHOSEN_INSTALL_SET=PT
    I tested it, if PeopleSoft HCM Database is unchecked during installation (and consequenty not in the feature list in the logfile), there's no option to install a SYS database later on.
    If this is the case, you may want to reinstall the appl in the same directory. I do not think it will hurt.
    HTH,
    Nicolas.

  • Is there some sort of bug where app tabs don't work with private browsing? My pinned tabs don't show when I start Firefox in private mode.

    I recently updated to Firefox 5.0, and I was pretty impressed with the app tabs. I usually use Firefox in private browsing mode, but recently I changed that to make use of the history function. However, I decided to change it back to permanent private browsing, and apparently my pinned tabs all just disappeared. Is there anyway I can change this?

    App (pinned) tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the Firefox profile folder.<br />
    If you use Private Browsing mode then no session data is stored to disk.

  • Firefox 4 tabs don't show

    Just installed Firefox 4 RC. No tabs, just a blank blue bar where the tabs should be. When I attempt to open a new tab nothing happens. And I can't open the add-on screen either.

    Create a new profile exclusively for the Firefox 4 version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
    * http://kb.mozillazine.org/Testing_pre-release_versions
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

  • MY TABS DON'T SHOW THE BACK BUTTON-HAVE TO OPEN NEW TAB

    recently my browser has changed and there is no 'back' button on any tab - I can only go forward, not back to previous page.

    There is no back button on the tab.<br />
    There are Back and forward buttons on the Navigation Toolbar where the Forward button is only visible when there is such a page available (i.e. you have used the Back button at lest once).
    *https://support.mozilla.org/kb/How+to+customize+the+toolbar
    *https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing
    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.

  • Trying to clear cache-press firefox button top left of page, don't show advanced tab. am lost here. tpykanu

    as told on clear cache page, press firefox button (top left) then press advanced tab. yet when press firefox button, advanced tab don't show up

    See also:
    *https://support.mozilla.com/kb/Options+window+-+Advanced+panel
    *Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the Menu Bar is hidden.
    *Use "Firefox > Options" instead of "Tools > Options" if the menu bar is hidden.

  • Debugger and smart data

    i have used the debugger and it works great! however, i am a little confused about
    how the Smart Data feature works.
    my question is ... how do you get "Smart Data" to show up in the Smart Data tab?
    the documentation mentions that it displays "Breakpoint Data". how do you set this up?

    1. Click on a Procedure under the procedures node.
    2. The Procedure will be displayed on Right. Click Edit to bring up the code frame for the procedure.
    3. On the Code frame set a few break points.
    4. Ensure that the procedure is compiled for debug. If not click the Compile for Debug button.
    5. Click the debug button
    6. When the first breakpoint is hit the Debugging Log is displayed at the bottom of the SQL Developer window.
    7. Click on the Smart Data tab.
    8. On the Smart Data tab monitor the value of various objects. Verify the Type of these objects.
    9. Monitor the value of these objects as the procedure is debugged.
    HTH
    -Vasan

  • Tab Set not showing for Parent Tab - Bug?

    Greetings,
    (I figured someone else has experienced this issue, but after searching with multiple words I haven't found a thread.)
    Using Application Express 4.0.2.00.07. The application in question is using Theme 7 - Modern Blue
    My APEX application has over 20 pages and a lot of tabs, so I decided to create 2 new parent tabs (for a total of 3 parent tabs) and then assign the tabs to different tab sets so that I won't run out of horizontal space for all the tabs.
    As best that I can tell everything with the parent tabs is set up correctly. I even had another developer look over everything I set up. The two newly created 2 parent tabs don't show their tab set of tabs when I click them. The parent tab that was first created still works, but not the 2 new ones. When we maintain everything via the tab interface everything looks OK, but when we look at the pages they are still assigned to the original tab and I don't see a way to change the tab set on the page level. We copied and deleted a page and when we did the page and its tab displays with the correct parent tab.
    Is this a bug? It seems to be. It seems that creating the parent tab does not cascade down to the page level.
    Also, regardless if it is a bug, is there a way to change the tab set at the page level? I hate to copy a lot of pages and delete the orignal pages, but maybe that's the only work around.
    Also, maybe this is a theme issue? I know that some themes don't handle certain aspects correctly.
    Thanks, Tony

    I think I figured it out. There is a section on the page where you can change the Tab Set. It is under Display Attributes.

  • Unable to update a field using the Data tab on a VIEW

    When viewing data using a VIEW instead of going to the table directly, am unable to change the values in any of the fields
    When I click on the list of VIEWs for a schema, then select a view that is based on a SELECT statement for a single table with a Primary key, and then click on the DATA tab to modify the value in one of the fields, SQL Developer does not allow me to change the value.
    Went into SQL Plus, and was able to execute an UPDATE statement against the same row of that VIEW, and update that field ("UPDATE vw_mytable SET thisfield = 'YES' WHEN row_id_number = 1'").
    Does SQL Developer not allow updating tables through a VIEW?
    Will it allow updating in the future? Please say yes.
    Oracle 10g DB and latest version of SQL Developer.

    Remember to add feature requests and vote on them on the SQL Developer Exchange!
    <br>
    <p>We have added updateable views to 1.1, but do remember, not all views are updateable - even in SQL*Plus.</p>
    <br>
    Sue

  • Add extra field in ME21N at Additional  Data Tab

    Hi All,
              I want to add Two fields from our custom table (Tax and Tax type) in ME21N T code at Additional data tab,
              and save the value in our custom table.
    Please suggest me for this .
    I searched for this there mentioned  BADI-   ME_GUI_PO_CUST
    So Please advise me how to proceed for this one.
    Thanks & Regard
    Vivek

    Use MM06E005 enhancement to add fields in screen of ME21N
    SAPMM06E 0101 CUSTSCR1 SAPLXM06 0101 Subscreen: PO header
    SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111 Subscreen:  PO item
    SAPMM06E 0201 CUSTSCR1 SAPLXM06 0201 Subscreen: agreement header
    SAPMM06E 0211 CUSTSCR1 SAPLXM06 0211 Subscreen: agreement item
    SAPMM06E 0301 CUSTSCR1 SAPLXM06 0301 Subscreen: RFQ header
    SAPMM06E 0311 CUSTSCR1 SAPLXM06 0311 Subscreen: RFQ item
    Use the appropriate screen exit depending on where u require to add field

  • Debug Mode - Source tables not showing up in Test Data tab

    I'm new at OWB, so pardon me if this isn't a great question...
    I built a mapping based on four views that are stored in Oracle. When I tried to run the mapping it gave me some errors, so I initiated debug mode. After the debug mode is initialized, only the target table shows up on the Test Data tab, the four source views are not there. How can I get the sources to show up in the Test Data tab so that I can define what test data to use?
    Thank you!
    Doug Faust
    Long Island University

    Thankyou Vetsrini.
    I will try out custom log table approach.
    I see that there is a way to test pl/sql scripts via the DBMS output
    and for that we need some invoking program like SQL PLUS to get the
    log out into a file.
    However, we wanted to see if there is a way to set Pl/SQL log files
    and get PL/SQL logs when the calling program is BI Publisher.
    regards
    Girija

  • Af:table filtering(inputDate) don't show results for a specific search date

    Hi again to every one.
    I have a database table as :
    sql> describe YES_NO_DATE_TEST
    FECHA TIMESTAMP(6) --> param search
    DESCRIPCION VARCHAR2(200 CHAR)
    VERIFICADO VARCHAR2(1 CHAR)
    I created my Bussines Components, I have a search page, I drag and drop this DataControl as af:table, called : YES_NO_DATE_TESTView1, to a jspx page ( search page ), I enabled sorting and filtering properties in the af:table .
    af:inputDate value="#{vs.filterCriteria.Fecha}" id="id1">
    <af:convertDateTime pattern="#{bindings.YesNoDateTestView1.hints.Fecha.format}"/>
    </af:inputDate>
    I run the search page, and show me a : af:inputDate , for choose and put a date.
    but, when I choose a date, and press the enter key, the search result by af:inputDate, do not show me nothing.
    How I can solve that ?
    Note :
    In the UI Hints of View Object I put this properties :
    format type : simple date
    format : dd-MM-yyyy
    I'm using JDeveloper 11.1.2.0.0

    wht is the database column type..??
    It's a TimeStamp Type. ----> FECHA TIMESTAMP(6)
    what is the query that is getting executed in the backend... when you do the search... ?
    My query in the server is :
    Select
    FECHA,
    DESCRIPCION,
    VERIFICADO
    FROM YES_NO_DATE_TEST;
    are you getting the expected results when you run the query..??
    Yes , I m . The query above is made for the View Object. But I don't why when I put a date in the af:inputDate the search don't show me the results that I hope.
    Or , Need I to Programaticallly access to the InputDate and passed to a bind variable on the query ??

  • Data tab content blank in debugging

    Hello,
    On sql developer 3222009
    At debugging a plsql store procedure, everything is doing well but when the code go to an internal procedure the data tab content became blank.
    Thnaks
    Nelson

    Jeff
    Internal procedure that I mean is a procedure inside a procedure, like a inner procedure.
    When we are in the "main" procedure the content appear normally but when the control of execution goes to one inner procedure, the content of the data tab is in blank, empty.
    Thanks
    Nelson

  • Multisession data DVD burned on windows don't show the folders on Mac.

    Hi,
    I think that is a well discussed thread but I weren't able to find anything at this concern on google and this forum.
    I've burned a multisession data DVD on Nero (windows XP). That DVD already have files burned and is multisession. After burn it, the folder that I'd copied on PC don't show up on Mac. Is there a way to burn that files on windows that can be recognised on a Mac? Is this a question of burn format? The parameters of copy on Nero was keep as default.
    Thanks in advance.

    It seems like Mac OS X doesn't support multisession-burnt DVDs, no matter how you put them together. In the best case, you'll only be able to see the first session. Finalizing DVDs has no impact on Mac OS X ability to read them completely.
    I learnt it the hard way when switching from Ubuntu to Mac OS X, while on the first, Nero-burnt DVDs would read flawlessly, finalized or not. I ended up being forced to burn back around 120 DVDs in one session in Nero.
    So far, Apple doesn't seem to have any plan in supporting multisession DVD burning and reading in OS X. As they have a tendancy to ditch obsolete technology sooner than others, I wouldn't hold my breath on it. On a personal level, this lack of support has made my hard drive space needs skyrocket, as I'm no longer able to incrementally burn DVDs, as I always did in Windows and Ubuntu.
    Hope that helps.

Maybe you are looking for