In Designer, old application system disappears after New version and ORA-01562

In Designer 2.1.2, after starting (RON 2.0.24.1.1) Application / New version,
error ORA-01562 occurred (because I have a smaller rollback segment on line).
Now I can't find in repository
old version (1) of my application system,
but new version (2) exists in repository.
Unchecking the 'Show Current Versions Only' check box doesn't help.
Even Designer API statement:
'SELECT id, name, version
FROM ci_application_systems'
displays only new version (2).
Means this that Designer:
- first changes old version number to new version number and commits
- and then copies new version to old?
How to return old version number (without Designer API)?
Thanks and regards
null

Answer from Oracle
(MetaLink Technical Forums):
'When Designer versions it takes a snapshot of the first version
and then changes the originals version number to 2.
If designer run out of rollback segments while creating a new version
it will not show the old version again.
This is a bug (818860). It is in the resolution stage.'
null

Similar Messages

  • Update application to run in newer versions and browsers

    I have a graphing application that ran fine until later versions of Browsers and Flash Player.
    It still runs in IE 7.0, although I had to install FP 10.
    Are there lines of code I need to get it to run in Firefox and Safari? Both tell me to install Version 10 of FP, but it is installed. Won't run in Vista or Mac in Firefox.
    You can see it at http://www.widman.biz/uploads/calc-grafico.html
    or this attachment
    I need to get this running.
    thanks

    I have a graphing application that ran fine until later versions of Browsers and Flash Player.
    It still runs in IE 7.0, although I had to install FP 10.
    Are there lines of code I need to get it to run in Firefox and Safari? Both tell me to install Version 10 of FP, but it is installed. Won't run in Vista or Mac in Firefox.
    You can see it at http://www.widman.biz/uploads/calc-grafico.html
    or this attachment
    I need to get this running.
    thanks

  • Grouping collected versions of Designer 6 application systems in 10g

    Hello,
    I wasn't sure how to make the Subject clear, hopefully I'll explain my problem anyway.
    I'm testing the migration of application systems from Designer 6 to Designer 10g. Some of the v6 application systems are versioned in the sense that we created new versions and froze the current one, i.e in the RON, select Application > New Version in v6. So, we may have several 'versions' of an application system called TEST, i.e.
    TEST (1)
    TEST (2)
    TEST (3)
    ... and so on to TEST (X). X is live, the rest are frozen.
    In the 10g RON, each version (all frozen and live) of TEST appears as a separate Container in its own right. Imagine we have this situation with other named application systems we've migrated - we're dealing with a big list in the RON.
    What I want to do is group all my TEST containers under a 'TEST' top level container to make navigating a bit easier (so I can expand the top level only if I want to see all the versions underneath). I did this and used the option 'Copy Application System' to copy TEST (1) and TEST (2) into this TEST top level. Unfortunately the audit info for TEST (1) and TEST (2) under the new TEST container has been lost - they now have today's date. As they're copies, I still have TEST (1) and TEST (2) as explicit Containers in their own right, but I can't see how to group them as I'd like without losing this audit info.
    So - is this possible? If so, what am I doing wrong?
    Hope I've explained myself. I should add we're not switching versioning on in 10g yet, so we've the GLOBAL_SHARED_WORKAREA for the moment.
    Thanks, Antony

    Michael,
    Thanks again. We need to bring older versions of the frozen application systems, e.g. TEST(4), as we have interdependencies with other application systems (in terms of shared objects). Otherwise we would have only brought the latest versions over to simplify things.
    When you say at the end of your reponse to 'start the SCM's method of versioning', you're talking about switching the versioning on in 10g, right? We were going to migrate our v6 content and use the GLOBAL_SHARED_WORKAREA for the moment, and enabling versioning and all that entails would be the next phase.
    Antony

  • Pictures disappeared after installing Yosemite and new Iphoto. Why

    Pictures disappeared after installing Yosemite and new Iphoto. Why ?

    I also started having problems with iPhoto after installing Yosemite.  Some of the Event collections lost the picture and just has a grey square in its place.  When I click on the Event, it shows a white dotted lined square for each picture and if I click on the picture, it shows an exclamation mark.
    Check, if you also are having a folder "Old Masters" inside the iPhoto Library package, as described by  Muhamad Abdulkadir.
    Ctrl-click (or right-click) your iPhoto Library in the Pictures folder , then select "Show Package Contents".  If you are seeing a folder "Old Masters", copy this folder out of the library. Look inside - are the original image files of the problematic photos inside?
    Are any photos in your "Masters"folder?

  • Why did my Application Stack Disappear after I downloaded an OS update?

    My Application Stack disappeared after I downloaded an OS update.  I can get it back as a folder on the dock but not the Application Stack. I am relatively new to Macs so maybe I missed something in the setup.

    Right-click or Control-click on the Applications folder icon in the Dock. A popup menu will open. Select Stack from the Display As section.

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

  • Today I think firefox automatically installed a new version and after that it said my adobe flash was old so I had to update that. Now I can't open links in a new window.

    Today I think firefox automatically installed a new version and after that it said my adobe flash was old so I had to update that. Now I can't open links in a new window.

    Firefox doesn't install new versions of plugins, but Flash may update itself automatically.<br />
    You are still one version behind on Flash, current is Flash 10.1 r85<br />
    If the Flash player didn't update properly then you need to download the full version and run the installer as Administrator (right-click: Run as ...)
    Flash Global Notifications Settings Panel:<br />
    *http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.html
    You are more versions behind on Java updates with having Java 6 U11, current is 6 U22.
    *Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

  • Delta are pointing Old BW system instead of new BW system

    Hi,
    We are doing upgrade and as part of upgrade BI 7.0 we have copied existing BW system into new BW system.
    I have a extracted data from R/3 to BI system.All the full loads went through successful except Delta data load into BI system.
    Delta data source are pointing Old BW system instead of new BW system.
    I have checked RSA7 where all the deltas are pointing to Old BW system instaed of new BW syste.
    I beleive some thing might have happend during System copy from Old BW system to New BW system.
    Please correct me if i am wrong about my scenario
    I would like to delete delta init which is pointing to BW old system and would like to do new delta .
    For that i would like to delte entries in R/3 source table ROOSPRMSF,ROOSPRMSC.
    In BW side RSSDLINIT and will extract data using full update and then will do delta init without data transfer and do delta on it.
    Please some advise me which is best way
    to check with basis do ask them to correct it,other wise deleting deltafrom delta queue.
    Its urgent

    Hi,
    You have to check the TRFCQOUT table to see if the Delta queues are still pointing to the old system ID.
    Using ABAP program you can change the System ID. you can use the below code by creating a custom report( executable Program) you can change the System ID's . You should have done this before pulling delta's
    anyway, you can try to change and see if you can pull deltas.
    Tables:  TRFCQOUT, RFCATTRIB.
    Data:  count type i.
    parameters:
           ssystem like trfcqout-dest obligatory default 'Production System Id here',
           tsystem like RFCATTRIB-rfcdest obligatory default 'Non Production System Id here',
           tmod as checkbox default 'X'.
    if ( sy-sysid = 'R/3 Production system id here' or sy-sysid = 'BW production system id here' ).
      write:/ 'You are not permitted to run this program in production.'.
      stop.
    endif.
    if tmod = 'X'.
      Select count( * ) into count from TRFCQOUT where dest = ssystem.
      if sy-subrc <> 0.
        write:/  'Cannot process request, return code ', sy-subrc.
        stop.
      else.
        write:/ count, 'entries in TRFCQOUT will be converted.'.
      endif.
    else.
    This will update the qRFC queue by changing all specified queues
    related to a source logical system to a target logical system.
    This enables the copied systems to remain consistent without
    having to run any loads.
      UPDATE TRFCQOUT SET   DEST = tsystem
                      WHERE DEST = ssystem.
      if sy-subrc <> 0.
        write:/ 'Examine return code not equal to zero.'.
        stop.
      else.
        write:/ sy-dbcnt, 'entries were updated in table TRFCQOUT.'.
      endif.
    endif.
    Thanks

  • I can't save an old InDesign file to the new version

    I can't save an old InDesign file to the new version. I keep getting this message:
    I can only save the file as .IDML.

    This happens to ALL old InDesign files on my iMac (problem does not happen on my Macbook pro). I have saved the files as .idml and opened them again. I get the same error when I try to save the file as .indd. They can ONLY be saved as .idml.
    I never embed images and do not have font issues (file was created on the same iMac as it is being opened on now).
    Sometimes I get an error when I first try to open an old file - it ays the file is damaged and can't be opened. I try again right after and it opens fine.

  • After I installed the latest version of ITunes I get a message saying I'm missing the SQlite3.dll file. I have even unistalled the new version and then re-installed, still same message.

    After I installed the latest version of ITunes I get a message saying I'm missing the SQlite3.dll file. I have even unistalled the new version and then re-installed, still same message.

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • How can I make my Introduction_mc automatically disappear after 10 Seconds and load Home_mc?

    Hi,
    How can I make my Introduction_mc automatically disappear after 10 Seconds and load Home_mc (automatically)? I don't want user to change by himself this Introduction page. It should be done automatically.
    What is the procedure and code to achieve it, please?
    Thanks.

    Hi,
    I gues you are using AS2.0, then use setInterval, in AS3.0 user Timer Class.
    AS2.0
    var interval:Number = setInterval(doThis,10000);//in milliseconds
    function doThis():Void{
    //do something;
    AS3.0
    var timer:Timer = new Timer(10000, 1);
    timer.addEventListener(TimerEvent.TIMER_COMPLETE, onTimerCompleteHandler, false, 0, true )
    function onTimerCompleteHandler(event:TimerEvent):void{
    //do something;
    For details: http://blogs.adobe.com/pdehaan/2006/07/using_the_timer_class_in_actio.html
    Warm Regards
    Deepanjan Das
    http://deepanjandas.wordpress.com

  • You cannot use the application "System Preferences" with this version OS X

    You cannot use the application “System Preferences” with this version of Mac OS X.
    I received this error message when trying to run System Preferences (SP) for the first time after running the 10.5.1 update (from the download, not software update). After the update, I repaired permissions. Did another restart. Same.
    I reinstalled 10.5.1 update. Same message. Logged in as another user. No change.
    I removed the com.apple.systempreferences.plist from ~/library/preferences. No change, and it did not re-create the .plist file.
    Any ideas? No one else seems to be having this problem as far as I can tell.
    dkrockville

    I have had this problem with many applications after updating to 10.5.1, including
    System Preferences, Calculator, Preview. Tried repairing permissions, and other tips from this thread. The strange thing is, the actual Leopard applications seem to have actually vanished? I don't know if this is anything to do with Time Machine; Anyway, My fix was:
    Download Pacifist (if you don't already have it), locate the apps that you're having problems with on the Leopard install DVD, and copy them to the Applications Folder (Click on 'Replace Bundle')
    Problem Solved for Me!
    Hope this Helps!

  • My old ipod has lots of music on it this was connected to a computer that was stolen, I now have a new ipod thats all connected with music on to my replacement computer, how can i get my old ipod music onto my new library and new ipod

    my old ipod has lots of music on it this was connected to a computer that was stolen, I now have a new ipod thats all connected with music on to my replacement computer, how can i get my old ipod music onto my new library and new ipod

    Try these 2 User Tips...
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991

  • I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software

  • Ever since the last update I don't have my old bookmarks, can't add new ones and can't import my HTML file. How do I fix this?

    ever since the last firefox update I don't have my old bookmarks, can't add new ones and can't add my HTML file of my bookmarks

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Maybe you are looking for