In fusion BI Publisher Enterprise only the data having US as language in tl table are geting displayed.

Hi,
I am using Oracle Business Intelligence 11.1.1.7.10.
In my Dataset sql have condition as "tl_table.language = USERENV('LANG')".So it should fetch the data as per the userenv language.
But it fetching only the column having the US as language in tl table.I tested the select USERENV('LANG') from dual by creating a demo datamodel ,it getting only US even after I have logged in using other language than US en .Just for testing I removed the "tl_table.language = USERENV('LANG')" condition than it fetched all the column.The web pages are ok the text are displaying in logged in language.
My requirement is that if I have logged in to BIP using Korean language than it should fetch all the column having Korean(KO) as language in tl table.

Similar Messages

Displaying metadata, how to display ONLY the Date

I would like to display the Date below each image in Aperture 3. When I select "Date" in the Browser & Viewer Metadata window, the result is a very long string with the Date, the Time and the Time Zone. meaning that most of the time I see nothing because the string is much too long to be displayed...
How to display ONLY the Date ?
Thank you.
Olivier

om28 wrote:
I will do that but still... if the Date could be ONLY the Date "without time and time zone", I would be able to display more information.. and it will look nicer.
I said at the top of my first response above: +Afaik, there is no way within Aperture to change the date format of the date metadata overlay.+
Send Aperture feedback to Apple via "Aperture→Provide Aperture Feedback"
In the past I used Expression Media and the config for displaying such info was better.
Aperture has a strange interface for it (and for other parameters), it does not behave at all like an Apple software (for the GUI), probably an external development team... but I agree it is more complex than iPhoto.
Aperture is 10x more complex than iPhoto.
If you want to see a rigid, boxed, "engineer"-style image database interface, take a look at Lightroom 3. It's a great program -- but it's a very different concept of information presentation and interaction.
Thanks again.

Number Ranges-The data is locked by user ... and can be displayed only

I wanted ti define number ranges - Transaction CXEG in Consolidation, and somehow i blocked the data (message: The data is locked by user ... and can be displayed only). How i can unlock the data so i can define new number ranges for this year. Please help

Hi,
Make sure you don't have any open sessions. If not, then go to SM12, and delete the relevant locked entry.
Regards,
Eli

How to get only the date without the time in the footer of a printout?

Is there a way to get only the date without the time in the footer of a printout?

As far as I can tell, there's no built-in option to get the date printed without the time. It's hardcoded in a C++ file.
As a workaround, you can enter custom text for the footer, but it would need to be updated every time the date changed. I can think of a couple ways to automate that:
* An add-on (but I'm not aware of any add-on for this)
* External process to push a new date into prefs.js, a settings file that stores your header/footer preferences, among others (but Firefox should be closed when you update this file, and it will be read when you restart)
Not easy enough, I know.

How to export only the data displayed in table of a jsp page to Excel

Hi All,
I want to export only the data that is displayed in the table of a jsp page to excel. But with my current code everything is getting exported to excel.
<input type="checkbox" name="download" onclick = "form.submit()"/> Export to Excel
response.setContentType("application/vnd.ms-excel");
response.setHeader("Content-disposition", "inline; filename=fileName.xls");
the table is displayed in the jsp using the following code:
<table cellspacing="2" cellpadding="3" border="1"
width="100%"> <tr> <%for (int i = 2; i <= cols; i++) {%>
<td>
<%
out.println( rsmd.getColumnName(i) + " ");
} %>
<% while (rsettaba.next ())
out.println("<tr>");
for (int j= 2; j <= cols ; j++) {
//out.println("<td>"+rsetallcl.getString(j)+"</td>");
String varnl = rsettaba.getString(j);
if ( varnl == null )
out.println("<td> Empty </td>");
else
out.println("<td>"+rsettaba.getString(j)+"</td>");
out.println("</tr>");
%>
</td>
</tr>
</table>
please can anyone help how to just extract only the data in the table of a jsp page to excel.
Edited by: Ramky48 on Dec 9, 2009 9:51 PM

Ramky48,
Why did you open a new thread when you had gotten quite a few responses and suggestions on the [url http://forums.oracle.com/forums/thread.jspa?threadID=998411]thread where you asked the same question - seems the best thing to do would be to continue on the same thread?
However, your question has nothing to do with JDeveloper/ADF. If you'd like to do it the ADF way, it's trivially easy - you can use the [url http://download.oracle.com/docs/cd/E15523_01/apirefs.1111/e12419/tagdoc/af_exportCollectionActionListener.html]af:exportCollectionActionListener component, which does what you are asking for. If you want to use a straight JSP way, there were several good suggestions in the other thread you opened, or Googling "jsp export to excel" will get you about 4.6 million hits; the first 10 or so look pretty promising.
John

How to retrieve the data type of a column of a table?

Hi,
I want to retrieve the data type of a column of a table. At the moment I am querying "OCI_ATTR_DATA_TYPE" attribute but it is returning SQLT_CHR for both varchar2 and nvarchar2 data type columns. I need to distinguish between these two data types columns separately. Is there any API through which I could get the exact data type of a column i.e. "nvarchar2"?
Thanks in advance.
Hashim

Hi,
This is the Oracle C++ Call Interface (OCCI) forum - I'm not sure if you are using OCCI or OCI (Oracle Call Interface - the C interface) since you reference "OCI_ATTR_DATA_TYPE" which is more of an OCI focus than OCCI.
In any case, you might take a look at "OCI_ATTR_CHARSET_FORM" which takes the following values:
#define SQLCS_IMPLICIT 1 /* for CHAR, VARCHAR2, CLOB w/o a specified set */
#define SQLCS_NCHAR 2 /* for NCHAR, NCHAR VARYING, NCLOB */So, if you have a datatype of SQLT_CHR and OCI_ATTR_CHARSET_FORM is SQLCS_IMPLICIT then you have a varchar2 if it is SQLCS_NCHAR then you have an nvarchar2.
If you are using OCCI and not OCI then take a look at MetaData::ATTR_DATA_TYPE and MetaData::ATTR_CHARSET_FORM which expose OCI_ATTR_DATA_TYPE and OCI_ATTR_CHARSET_FORM respectively.
Perhaps that will get you what you want.
Regards,
Mark

Need to access my photos on my broken iphone 5. Downloaded icloud on my pc and it is only recognising my ipad, but even at that no photos are being displayed.

need to access my photos on my broken iphone 5. Downloaded icloud on my pc and it is only recognising my ipad, but even at that no photos are being displayed.

Hi Ingo2711, Thanks a million for your reply. That's probably what it is. Now next thing, my iphone will not switch on at all. No water damage or physical damage. I brought to an irepair place and he was first able to see the photos on my phone somehow but when I brought it back to get fixed he couldn't. I have been told by a few people that it may just be the charge port or battery or unfortunately the logic/motherboard. What is my best bet? I'm not able to afford to get it officially fixed if it can be. Any recommendations? By the way, thanks a million.

How can I display only the Data Logging pull down menu on my LV front panel?

Is it possible to hide all unused pull down menu on my front panel vi like File, Edit, View etc.. and only
display the pull down menu for the Data logging?!
best regards
Norick

Hey,
You can build your own runtime menu (Edit>runtime menu) and then e.g. only display the application items you want to.
Christian

How to get ONLY the data shown in the plot area (Chart)

My chart history length are 120000, often I don't need to save the whole
buffer, just the data shown in the plot area?
Richard Pettersen

Hi Richard,
you haven't said which version of LabVIEW you're using, so I've assumed 6.1, although this should be fine for older versions too.
I put down a chart with a scrollbar, so I could go through the old data, and put an indicator attached to the x-scale->Range->minimum and x-scale->Range->maximum. These followed the displayed elements in the chart as I scrolled through the data. You can therefore link in the chart history (history data property of the chart) with a array subset to retrieve the appropriate portion.
Be aware though. The minimum and maximum that the chart is showing on the x-scale may not be a part of the history data. E.g. if I set the history length to 1000 points, and produce on the first run, 1000 points, then my minimum and maximum are a
t say 899 and 999. I then produce a second set of data, 1000 points long, and my min and max move to 1899 and 1999. As my history data is only 1000 long, I can scroll back to 1000 OK, but my min and max used as indexes don't relate anymore. The array of data is from 0 to 999, but my indexes can run from 1000 to 1999. So I have to add in a check that sees how much data is available before attempting to index, and then it's down to the flow of the program to try to work out where the data actually is (I'll leave that one to you - you'll need to keep track of the history data compared to the maximum (shown just after a point is added though this then makes a mess of your data! - possible to keep a track of new minimum when adding new data : the maximum (which will show once new data goes on) minus the history length gives the minimum that can be scrolled to - subtract this from all max's and min's to get real offset into the data - history length can be got from the history data and an a
rray size sub .vi)
Obviously there's no problem if you're clearing the graph everytime you either plot new data, or reach maximum capacity on the history data as the indexes return to zero.
Hope that helps
S.
// it takes almost no time to rate an answer

I need to BI Publisher to load the data from Disc worksheet into RTF

Can anyone help how to link the RTF and Data Source[Discoverer Worksheet] in BI Publisher.

Hi Rani,
You can also use the ALE IDOC method to load data from legacy to CRM system if you have some middlware tool(E.g. XI) in between. We have implemented this in our project where we were getting flat files from legacy, XI was converting the same into IDOC and the IDOC was sent to CRM where we read the IDOC data, populate the standard BAPI's or function modules to create the data in CRM.
You need to define an IDOC TYPE similar to the data structure on the legacy system. Maintain the ALE settings. Write the function module to validate and create data in the CRM system.
E.G. To create business partner SAP has provided BAPI_BUPA_CREATE_FROM_DATA bapi.
<b>Reward points if it helps.</b>

Reading the Data from dynamically added rows of a table...

Hi,
              I am using adobe interactive form (WD ABAP) in which i am adding the table rows dynamically (using Jscript code). I have to fech these data into an internal table. But I can read only the first row data..
              Also While adding rows dynamically the same data is repeating for the consecutive rows..
              I have found many similar posts in sdn, but i cannot get the solution. They have mentioned about adding in WDDOINIT method. Can anyone explain me what should be done,..?
1) How to solve repeatative data while adding rows..?
2) How to read dynamically added row data during runtime into internal table..?
Thanks,
Surya.

Discussed @ SDN lot of time before. Have a look at any of below threads:-
Dynamic table in interactive form...
Make dynamic tables in Adobe Interactive forms
Adding Rows dynamically upon clicking the button
How to get values to WebDynpro ABAP from dynamic table?
Chintan

How to load the data from flat file ( ex excel ) to Planning area directly

Hi all ,
How can i load thedata fro m flat file directly to Planning area .
PLease help me in this.
Regards,
Chandu .

download one key figure data from planning book ( interactive damand plan) and made some changes and need to upload the data back to same planning book
But, may I know why you are thinking of downloading, changing and uploading for just changing the figures for a particular key figure. You can do it in the planning book itself.
However, not all the key-figures can be changed. But, what type of key-figure you are speaking here? Is it like 'Forecast' for which the value is based on other key-figures, or is like a key-figure where some manual adjustments are to be done--so that it can be manually edited? However, in both the cases, the data can be changed in the planning book only. In first case, you can change the values of dependant key-figures and in the second case, you can change the key-figures directly.
And please note that you can change the values of the key-figures only at the detailed level. So, after loading the data in the book, use drill-down option, maintain the data at the detailed level, change the figures, and automatically, this gets reflected at the higher level.
In case you are unable to change the values, go to the 'Design' mode of the book, right-click your key-figure, under "Selected Rows", uncheck "Output Only" option. In case you are unable to see that option, then you are not authorised to change that. See if you can change the authorisations by going to the "Data View" tab in planning book configuration (/n/sapapo/sdp8b), and change the value of Status to 3.
Hope your query is answered with different solutions offered by many of the sdn colleagues here.
Regards,
Guru Charan.

How to find the date when entries were made in DEVACCESS table

Hi All,
I needed to know if there is a way to find the date when an a developer was registered in our SAP system.
I can see in DEVACCESS table (in SE16) all users registered along with their developer key but i also need to see when those entries were made. Can you please help in this.
Regards,
Ashish Robinson

Hi all,
Thanks for the replies but my issue is that I got only for some users from SCCR in service maketplace. It seems that that other users for which (i can see entries in table DEVACCESS in my system) were created with somne other s-user which we dont know at thsi time so finding from service marketplace is not working!
I needed to know iff there is some way i could get this information (when entries went in table or when the users registered) from SAP itself.... or may be from oracle sql level.
Thanks to suggest <removed by moderator>
Regards,
Ashish Robinson
Edited by: Thomas Zloch on Nov 23, 2010 2:28 PM - priority normalised

How to add a new metadata field to iPhoto where new field is calculated as age in years and month based on a specific date and the date photo was taken ? I want to calculate and display the age of my two kids on every photo.

Hi
How can I add 2 new metadata-fields to every photo in iPhoto ?
The new fields should state the age of my kids in years and months based on the date that they were born and the date that photo is taken.
Exampel:
My son is born 01.01.2010
My daughter is born 01.01.2012
Photo taken by data
Aage of son
Aage of daughter
01.07.2011
1 year 6 month
not born yet
01.01.2014
4 year 0 month
2 year 0 month
I would like to be able to search by kids age and get the info displayed when doing slideshows.
How to do this in iPhoto ?
Any alternatives to accomplish the same ?
Kind regards

It can't be done with iPhoto. There are some DAM (digital asset management) applications that can write to other IPTC fields that iPhoto can't read. One such app is Media Pro 1.
However you would have to calculate the age for each date and add it to one of the fields. There are online age calculators that can do that for you: Age Calculators
If you go thru that much trouble then use iPhoto, make the calculations and add the age to the Description field. Then you can use Smart Albums to search for 1year 6 month text.
OT

How can i save the data from ALV grid to my database tables?

Hi all,
Suppose in a grid i want to edit some fields and after editing the data i want to store the refresh data to my database tables. How can i do that? what is procedure? Please tell me in details.
Thanks in Advance,
Abhijit.

Hi,
   If you are doing it with oops concept then here are the steps for that.
1) Declare DATA : er_data_changed TYPE REF TO cl_alv_changed_data_protocol,
       data_changed TYPE REF TO cl_alv_changed_data_protocol.
--For getting the row no of of the row which is edited by user
DATA : ls_mod_cell TYPE table of lvc_s_modi with header line,
lv_value TYPE lvc_value .
in your program
2) Define a class
CLASS notification DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS : handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid IMPORTING er_data_changed.
ENDCLASS.                    "NOTIFICATION DEFINITION
3) For that class write the implementation
CLASS notification IMPLEMENTATION.
METHOD handle_data_changed.
    PERFORM handle_data_changed USING er_data_changed.
ENDMETHOD.                    "handle_data_changed
ENDCLASS.                    "NOTIFICATION IMPLEMENTATION
4) In the PERFORM handle_data_changed you code like this
FORM handle_data_changed USING er_data_changed type ref TO
cl_alv_changed_data_protocol.
SORT er_data_changed->mt_mod_cells BY row_id .
LOOP AT er_data_changed->mt_mod_cells
INTO ls_mod_cell .
append ls_mod_cell.
ENDLOOP.
*LS_MOD_CELL will have all the rows which were edited
and all the updated data corresponding to those rows*
You can now use the the data which is in LS_MOD_CELL
to update into your DB Table.
LOOP at ls_mod_cell.
READ TABLE itab3 INTO t_output INDEX ls_mod_cell-row_id.
ENDLOOP.
ENDFORM.                    " handle_data_changed
Regards,
Syed

In fusion BI Publisher Enterprise only the data having US as language in tl table are geting displayed.

Similar Messages

Maybe you are looking for