In iWork Pages 5.1, how do I eliminate "text" in the Text Box?

In iWork Pages 5.1, how do I eliminate the word "text" which appears in the Text Box, when I've used a color filler and no words?

Select the text and delete.
If you don't want text in the box, don't use a text box ie in Shapes there are various shapes. Select one without 'T'.

Similar Messages

When saving a page under text format, the text is limited to 80 columns only, how to extend to 120 columns

When I save a page under text format, the text is limited to 80 columns only, how to extend to 120 columns (or more)?

HI K,
This is the Numbers (Mac OS) forum. Your question about Numbers for iOS will probably get better results posting in the iWork for iOS area. the link will take you there.
Regards,
Barry

I upgraded pages. Now when I begin a new document I automatically have a text box. How do I get rid of the text box so that it does not automatically appear. What settings do I need to change?

I upgraded pages. Now when I begin a new document I automatically have a text box. How do I get rid of the text box so that it does not automatically appear. What settings do I need to change?

Perhaps you are loading a template that has a text block already on it.
You might try the blank template option and set that as your go to template in your preferences

I am a beginner of "pages" and have this problem of dots while writing the text. I dont know how to remove these bullets-like dots while spacing in the text. Please help

I am a beginner of "pages" and have this problem of dots while writing the text. I dont know how to remove these bullets-like dots while spacing in the text. Please help

Look up "formatting" in the User Guide.
http://manuals.info.apple.com/MANUALS/0/MA524/en_US/Pages_UserGuide.pdf

When pressing Ctrl+f to find something in a page the Find box remains open until I close it, in ALL tabs I have in the firefox window. How can I make firefox open the Find box ONLY in the tab I am in?

When pressing Ctrl+f to find something in a page the Find box remains open until I close it, in ALL tabs I have in the firefox window. How can I make firefox open the Find box ONLY in the tab I am in?

Firefox 4 and later versions save the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
Use "File > Exit" or "Firefox > Exit" (Mac: "Firefox > Quit Firefox") if you want to restore multiple windows. 
You can use "History > Restore Previous Session" to get the previous session at any time. 
You may need to click the orange/gray Firefox button to see History. 
There is also a "Restore Previous Session" button on the default about:home Home page.
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

How do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that,

how do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that, then it needs to "fly-out-bottom" again, I can do that, but not on the same line of text...any ideas...

my question
1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
2- how can create manual process to fetch row into specific items in page ( i tray these code
SELECT col1, col2, col3 ....
INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
FROM table
WHERE id = :P_id ) but no data retrieve .
I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
ORA-01403: no data found : Unable to fetch row multiple automated row fetch
On your second question, the manual process should work provided:
P_ID has a value when the process executes. You can do it this way:
i. Make this process as a on-load After/Before header process
ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

How to clear the text in the Text Editor

Hi all,
I created a Text editor and also i am having language field in the screen.
whenever i change the language auomatically the text has to change when the text exists for that
language.
this is working fine, but when the Text exist , the text editor should be blank.
But it is carrying the Previous editor text itself into it .
How to clear the text in the Editor.
Regards,
Madhavi

Hello Madhavi
The simple report ZUS_SDN_TEXTEDIT_CONTROL shows how to switch the texteditor contents when changing the language.
*& Report ZUS_SDN_TEXTEDIT_CONTROL
*& Thread: how to clear the text in the Text Editor
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1145272"></a>
*& By default the itab GT_OUTTAB contains texts in DE and EN.
*& To switch the language directly enter into the command window:
*& LANGU=DE, LANGU=EN or LANGU=FR
REPORT zus_sdn_textedit_control.
TYPE-POOLS: abap.
TYPES: ty_t_text TYPE TABLE OF as4text
 WITH DEFAULT KEY.
TYPES: BEGIN OF ty_s_outtab.
TYPES: language TYPE spras.
TYPES: text TYPE ty_t_text.
TYPES: END OF ty_s_outtab.
TYPES: ty_t_outtab TYPE STANDARD TABLE OF ty_s_outtab
 WITH DEFAULT KEY.
DATA: gt_outtab TYPE ty_t_outtab,
 gs_outtab TYPE ty_s_outtab.
DATA: gd_language TYPE spras.
DATA: go_docking TYPE REF TO cl_gui_docking_container,
 go_textedit TYPE REF TO cl_gui_textedit.
DATA: gd_okcode TYPE ui_func,
 gd_repid TYPE syst-repid.
START-OF-SELECTION.
PERFORM fill_texts.
gd_language = syst-langu.
PERFORM init_controls.
* Link the docking container to the target dynpro
gd_repid = syst-repid.
CALL METHOD go_docking->link
 EXPORTING
 repid = gd_repid
 dynnr = '0100'
* CONTAINER =
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM set_text_editor.
* NOTE: dynpro does not contain any elements
" ok-code => GD_OKCODE
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
TRANSLATE gd_okcode TO UPPER CASE.
CASE gd_okcode.
 WHEN 'BACK' OR
 'EXIT' OR
 'CANC'.
 SET SCREEN 0. LEAVE SCREEN.
 WHEN 'LANGU=DE' OR
 'LANGU=EN' OR
 'LANGU=FR'.
 PERFORM get_text_editor.
 SPLIT gd_okcode AT '=' INTO gd_okcode gd_language.
 PERFORM set_text_editor.
 WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form FILL_TEXTS
* text
* --> p1 text
* <-- p2 text
FORM fill_texts .
* define local data
DATA: ld_string TYPE string.
gs_outtab-language = 'EN'. REFRESH: gs_outtab-text.
ld_string = 'Good morning'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'DE'. REFRESH: gs_outtab-text.
ld_string = 'Guten Morgen'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'FR'. REFRESH: gs_outtab-text.
ld_string = space.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
ENDFORM. " FILL_TEXTS
*& Form INIT_CONTROLS
* text
* --> p1 text
* <-- p2 text
FORM init_controls .
CREATE OBJECT go_docking
 EXPORTING
 parent = cl_gui_container=>screen0
* repid =
* dynnr =
* side = dock_at_left
* extension = 50
* style =
* lifetime = lifetime_default
* caption =
* metric = 0
 ratio = 90
* no_autodef_progid_dynnr =
* name =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5
 OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_textedit
 EXPORTING
* max_number_chars =
* style = 0
* wordwrap_mode = wordwrap_at_windowborder
* wordwrap_position = -1
* wordwrap_to_linebreak_mode = false
* filedrop_mode = dropfile_event_off
 parent = go_docking
* lifetime =
* name =
 EXCEPTIONS
 error_cntl_create = 1
 error_cntl_init = 2
 error_cntl_link = 3
 error_dp_create = 4
 gui_type_not_supported = 5
 OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " INIT_CONTROLS
*& Form SET_TEXT_EDITOR
* text
* --> p1 text
* <-- p2 text
FORM set_text_editor .
BREAK-POINT.
CLEAR: gs_outtab.
READ TABLE gt_outtab INTO gs_outtab
 WITH KEY language = gd_language.
CALL METHOD go_textedit->set_text_as_stream
 EXPORTING
 text = gs_outtab-text
 EXCEPTIONS
 error_dp = 1
 error_dp_create = 2
 OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " SET_TEXT_EDITOR
*& Form GET_TEXT_EDITOR
* text
* --> p1 text
* <-- p2 text
FORM get_text_editor .
CLEAR: gs_outtab.
CALL METHOD go_textedit->get_text_as_stream
 EXPORTING
 only_when_modified = cl_gui_textedit=>true
 IMPORTING
 text = gs_outtab-text
* is_modified =
 EXCEPTIONS
 error_dp = 1
 error_cntl_call_method = 2
 OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MODIFY gt_outtab FROM gs_outtab
 TRANSPORTING text
 WHERE ( language = gd_language ).
ENDFORM. " GET_TEXT_EDITOR
Regards
Uwe

How do I print all of the text in a scrollable form field?

How do I print all of the text in a scrollable form field? When I print the form, the text becomes cut off based on the size of the field and displays a little plus sign in the lower right hand corner indicating more text. I want to print all of the text.

The form is HTML which means what you see in your browser window is what you will see in your print out. You can, as the form author, view the submitted data in the View Responses tab and print that out. You can also export the responses to Excel, CSV, or PDF and print that out.

How do I get rid of the blue box on my iCal on my iMac?

When I add an event in iCal, using my iMac, it is highlighted within a blue box on my iMac. When I add an event using my iPhone or iPad the blue box does not show up on my iMac. How do i get rid of the blue box on my iMac?

To take a screen shot on your mac: http://www.apple.com/findouthow/mac/#capturescreen
And then when you reply to a post you click the camera button at the top of the post window to attach an image.
From your description it sounds like you are adding an event to iCal and it is syncing (which is what its supposed to do). If you see something in iCal on the Mac and you don't want it there, click on it once and then go to Edit > Delete.
If you still can't delete that event:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Go to iCal > Quit iCal
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
--- NOTE: To get to "Home > Library" in Lion: Click anywhere on the desktop and then click on the "Go" menu at the top of the computer screen while holding down the "option" key on the keyboard. You will see "Library" in the menu.
4. Launch iCal and test.
If the issue persists:
1. Go to iCal > Quit iCal
2. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
--- NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
3. Launch iCal and test.

I just loaded the 'lion' now my mail takes a new life....how do i move the reading panel to the bottom / also how do i get rid of the text/content under each mail..two simple things not sure obvious on this version !!!

i just loaded the 'lion' now my mail takes a new life....how do i move the reading panel to the bottom / also how do i get rid of the text/content under each mail..two simple things not sure obvious on this version !!!

How do I edit the font and bold text in the message box in adobe send before sending to client?

How do I edit the font and bold text in the message box in adobe send before sending to client?

Hi BRAEWOOD DEVELOPMENTS,
You can edit the Subject & Message when you've selected Send Personalized Invitations (though you can't change the font or style of the text).
Best,
Sara

How do I get rid of the dialog box and audio that is in the bottom left of the screen that keeps telling me what I'm doing or need to do?

How do I get rid of the dialog box and audio that is in the bottom left corner of the screen running script and audio of what I'm doing or need to do?

Go into System Preferences, select Universal Access, turn off Voiceover.

How to add a hyperlink in the text caption?

Hi,
I am using Captivate 5. Anybody knows how to insert a hyperlink in a text caption? For example, the texts in the text caption are "See Adobe Captivate Forum for details." How to create a hyperlink for "Adobe Captivate Forum" which leads to the forum website?
Thanks,
Helen

There is no tru hyperlink object in Captivate as such.
You can use a button or a click box to provide users with an interactive object that when clicked will call a URL or document.
However, this doesn't really give you a mouse rollover effect the way users are accustomed to seeing in normal web hyperlinks.
If you really want to add a piece of on screen hyperlinked text (with rollover effect) to a Captivate project, the closest you'll come to it is this widget: http://www.infosemantics.com.au/hyperlink

May I know how to change the color of texts inside the indicator box?

Can anyone tell me how to change the color of texts inside the indicator box? I have tried to use property node but not really know how it functions.
In fact, I am writing a program for which the number inside indicator on front panel will show red color if the measured value can't reach the requirement. I am using LabView 6.1 Professional
Thank You for your attention!!!!!!

Simply use a property node with "NumText.TextColor" and wire the correct color depending on your test result.
The attached simple example (LV 6.1) lets you change it from the front panel. In your case, you would use your test output instead of a FP switch, of course. Message Edited by altenbach on 05-25-2005 09:05 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
TextColor.vi ‏18 KB

Hi Foks: How can I eliminate in Safari the short cut control 1...4 ? so that I can write these candidates in the NY Times Sudoku ? Thanks, Federico Penzo

Hi Foks: How can I eliminate in Safari the short cut control 1...4 ? so that I can write these candidates in the NY Times Sudoku ? Thanks, Federico Penzo

Do a custom install and install each version in its own program folder to use multiple Firefox versions.
* https://support.mozilla.com/kb/Custom+installation+of+Firefox+on+Windows
* https://support.mozilla.com/kb/Installing+a+previous+version+of+Firefox
Create a new profile exclusively for each Firefox version. 
Create a desktop shortcut with -P "profile" appended to the target to launch each Firefox version with its own profile.
See these mozillaZine KB articles for information:
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
* http://kb.mozillazine.org/Testing_pre-release_versions
 
''(in reply of a PM)''

In iWork Pages 5.1, how do I eliminate "text" in the Text Box?

Similar Messages

Maybe you are looking for