In mapping need to concatenate 10 fields

Hi All
in Mapping need to concatenate more than 10 fields , is there any way to make it short can concatenate all in one stretch

Hi Sridhar,
check this logic, it works.
data: begin of itab occurs 0,
        word(100),
       end of itab.
data: begin of jtab occurs 0,
        word(100),
       end of jtab.
itab-word = 'mahi'.
append itab.
itab-word = 'mahe'.
append itab.
itab-word = 'mahs'.
append itab.
loop at itab.
   concatenate itab-word jtab into jtab separated by space.
endloop.
    append jtab.
loop at jtab.
write:/ jtab-word.
endloop.
thanks\
Mahesh

Similar Messages

Need to concatenate more than 10 fields

Hi All
in Mapping need to concatenate more than 10 fields , is there any way to make it short can concatenate all in one stretch, instead of using mutiple conctenate statements
please help me
Thanking you
Sridahr

If this is a one time activity, better to go for using concatenate function multiple times.
Regards,
Prateek

ME51N - need to concatenate the PR # & the item # into a custom field.

Hi All,
I need to concatenate the PR number and the item number into a custom field in the customer data tab in transaction ME51N. I been looking at some user exits, but the problem is that when I try to use BAPI_PR_CHANGE in a user exit the BAPI failed, because the PR has not been committed to the EBAN table and it cannot fined it. The custom field is in the EBAN table. The other problem is that most user exits don't have access to the PR number. Can anyone tell me how I can update the custom field on a new PR creation after I click the save button?

Hi All,
I need to concatenate the PR number and the item number into a custom field in the customer data tab in transaction ME51N. I been looking at some user exits, but the problem is that when I try to use BAPI_PR_CHANGE in a user exit the BAPI failed, because the PR has not been committed to the EBAN table and it cannot fined it. The custom field is in the EBAN table. The other problem is that most user exits don't have access to the PR number. Can anyone tell me how I can update the custom field on a new PR creation after I click the save button?

Concatenate Two Fields Using EQL

I am trying to concatenate two fields my company has in Endeca and am not being able to accomplish this. I have a Call_Num field and a Task_Num field. I would like to combine these fields with a hyphen in between. In the SQL queries I have written, I've been able to do this by typing: Call_Num || '-' || Task_Num. I tried this in EQL and am told that it doesn't recognize the ||. I tried using the keyword Concat (like you do in Excel) - CONCAT(Call_Num, '-', Task_Num), and it didn't recognize that either. I spoke to someone else in my company who uses Endeca and they told me that I need to convert Call_Num and Task_Num to integers (both fields are currently formatted as text - which is what I want, because Task_Num usually starts with a 0), multiply them by 1000 and then add them together. That isn't what I'm looking for either.
I feel like I'm banging my head against a brick wall. I've been working on this simple task for about an hour now and have not met with any success.
Any assistance you can provide would be greatly appreciated.

EQL is for run-time querying, whereas you want the index to contain this as a concatenated property. Either generate this property as a concatenated version in your data feed to Endeca, or add a Record Manipulator to your pipeline of:
<EXPRESSION TYPE="VOID" NAME="CREATE">
<EXPRNODE NAME="PROP_NAME" VALUE="_YourConcatenatedAttribute"/>
<EXPRESSION TYPE="STRING" NAME="CONCAT">
<EXPRESSION TYPE="PROPERTY" NAME="IDENTITY">
<EXPRNODE NAME="PROP_NAME" VALUE="Call_Num"/>
</EXPRESSION>
<EXPRESSION TYPE="STRING" NAME="CONST">
<EXPRNODE NAME="VALUE" VALUE="-"/>
</EXPRESSION>
<EXPRESSION TYPE="PROPERTY" NAME="IDENTITY">
<EXPRNODE NAME="PROP_NAME" VALUE="Task_Num"/>
</EXPRESSION>
</EXPRESSION>
</EXPRESSION>
Define a property in your pipeline and then map "\_YourConcatenatedAttribute" to this (the "_" prefix just reminds you that the source attribute is programmatically generated rather than being the name of a property in your source data). You can then use this concatenated property for any sorting, filtering etc. you want to do.
Michael

Concatenate a field in internal table without loopat.

In an internal table,
I need to update one field (all rows) concatenate that field with a value say '999'.
Is it possible to do this in a single MODIFY statement without using loopat condition or any other best possible way to do it?

yes, it is possible without LOOP:
MODIFY itab FROM workarea WHERE condition TRANSPORTING field.
workarea has to like a single line of the internal table and has to contain the value you want to transfer
after TRANSPORTING you name the field you want to change
you can check the complete syntax (with examples) in SAPHelp

On activating persistent class: There is no mapping for one or more fields

Hi all,
I'm using an ECC 6.0 system.
I've just created a persistent class and defined the persistence. When I try to activate the class activating fails and I get the message "There is no mapping for one or more fields."
I did not, in fact, use all the fields of the database table I defined the persistence on. When I do use all the fields activating the class works without a problem.
However, as far as I know it should be possible to select only some of the fields when defining the persistence (the only fields I have to select are all the key fields of the table and I've done this).
Has anybody encountered the same problem or has anybody any idea on this?
Cheers,
Kathy

Hi Kathy,
this is exactly what I meant.
If you'd like, then you can also take a look at the documentation: http://help.sap.com/saphelp_nw04/helpdata/en/b0/9d0a3ad259cd58e10000000a11402f/frameset.htm
There under Mapping, you can find:
"You must map all columns of a database table to attributes. If you only want to manage some of the columns using Object Services, you must create a database view."
Making attributes private doesn't change the fact, that you still map all fields. If you have a lot of fields, which you don't want to map, then I will again suggest, that you define a DB-view. This will boost the performance of your implementation.
In case you need "quality 1st" performance, then I would suggest to use an ABAP implementation with internal tables, instead of the Persistent Service.
HTH,
Hristo

Need to add new fields to the condition table

Hello All,
The requirement is to create the new condtion table for MM containing the following fields and maintain the entries in this table:
- client
- characteristic
- class
- internal characteristic.
THe condition tables are created via tcode M/03 or through the customizing path
Material Management > Purchasing > Conditions > Define Price Determination Process > Maintain Condition Table.
The problem which i am facing is as follows :
-SAP has the standard procedure for the generation of the condition tables . Selected fields are made available by SAP in the field catalog and we can select only from the those available fields. Once we select the required fields the condition table is automatically generated in the background.
-As the requirement is, we need to have 4 fields in the generated condition table (client, characteristic, class and internal characteristic), but the problem is that none of these fields are available in the field catalog which is provided by SAP (in tcode M/03, M/04 and M/05).
-Designing of the Z table wonu2019t be useful as we would not be able to use the Z table as the condition table.
Can you please suggest how can we add the desired field to the existing field catalog in M/03 or is there any other alternate solution to this ?
Thanks in advance for your help.

>
Rinkesh Doshi wrote:
> Hello,
>
> The specific ABAP question which I have is :
>
> Is there any way in which we can enhance the existing field catalog in M/03 tcode to include the 4 new fields (client ,characteristic,class,internal characteristic) ?
>
> Thanks.
Please post your code which you developped until now and show us where the problem is. I cant see any ABAP related question.

VA01 Sales order - Header-- Accounting tab need to add a field

Dear All,
The requirement is,
1. I need to add a field in Sales order.
Path for the same is as follows:
VA01> Goto> Header--> Accounting tab
2. The field will be a date field that needs to calculate date on.
a)create a new field. ex - zchdt (chq due date)
b)when customers enters value in Assignment,
i.e vbak-zuonr
after that trigger logic is
3.vabk-kunnr = knvv-kunnr
a)sy-date + knvv-kvgr2 (exclude sundays)
example - 14 sept + 30 days = 14th october
should populate value - 14th october i.e. field (zchdt)
4. This activity needs to be triggered before the sales order is saved.
kindly know whether this is possible or not.
if possible how & which exit & also with example code.
if you could give me your contact(cell no).
Regards,
Nagendra D.S.
Mobile - +91 9819899082

Hi All,
VA01 Sales order - Header--> Accounting tab need to add a field. field name - zchdt(cheque due date)
when customer enters value in Assignment i.e zuonr & after that trigger logic is
1. vbak-kunnr = knvv-kunnr
2. sysdat + knvv-kvgr2 (exclude sundays)
example - 16 sept + 30days = 16 oct
in field zchdt value 16 oct as to populate
Pls help me in the code.
Regards
Nagendra

What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?

Hello All,
What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?
Navigation
Bob Sales manager<Ebiz form<service request tab<SR type<DFF<additional information for agents <cheque number
The field Cheque number Character allowed (, -) in the DFF Additional Information for Agent should only take numbers
Thanks & Regards
Ayesha

Thanks Sridar
If we use Number we cannot separate the cheque numbers with , or -
We need to enter numbers along with comma and '_' in cheque number field.
Thanks & Regards
Ayesha

Disk Utility - Partition map needs repair because a data partition needs loader space.

I just finished setting up both my OSX and Windows installs from scratch after fitting an SSD, which in-turn was right before my logic board died and Apple replaced it, now it looks like I have some sort of hard drive issue brewing.
This was my plan for the SSD, and how it currently displays in Disk Utility although that wasn't the case earlier:
And in Terminal:
My intention was to have two boot partitions for each OS, 'Macintosh HD' and 'Win 7 Pro' and a third shared data partition 'Projects' on the SSD, which I made in Drive Genius after installing Boot Camp. I don't want Macintosh HD accessible from Windows because I'll be using Paragon HFS+ or MacDrive to give write access and don't want OSs stomping on other OSs turf, hence needing three partitions. Everything looked fine until I just checked Disk Management under windows and realised it couldn't see the Projects volume. Even though it's fine in OS X, it was just marked black/unallocated space.
So I booted back into OSX, all my files look fine so I ran Disk Utility and the Partition tab looked really odd - unfortunately I didn't get a screenshot. All volumes reported their size correctly but visually, Macintosh HD took up most of the drive. I could see 'Windows 7 Pro' under this, but the Partition Layout section had a scrollbar, which if I scrolled down showed 'Projects' squished into a tiny gap at the bottom. I ran a Verify, which reported no problems, and at some time since the Partition Layout has reverted to how it should look (as in the screenshot above), with 'Projects' book-ended by "Macintosh HD' and 'Windows 7 Pro'.
Now when I run a Verify on Macintosh HD or Projects volumes, it says there's no problem, but if I run one on the drive, I get this message:
Volume Macintosh HD on disk0s2 has 0 bytes of trailing loader space and it needs 134217728 bytes
Problems were found with the partition map which might prevent booting
Error: Partition map needs repair because a data partition needs loader space.
I've only managed to find one other mention of this error here, but the fix is not relevant to me because I don't have Sophos installed. I've tried Single User/Safe Mode but it just boots into normal mode, so I can't do a fsck -fy.
** /dev/rdisk0s2 (NO WRITE)
Can't open /dev/rdisk0s2: Permission denied
That value in bytes is exactly 128mb, so I suspect the problem lies with one of the invisible partitions that show up in iPartition and Disk Management under Windows, but not in Disk Utility. I have backups and I suspect the root of the problem is partitioning in iPartition after installing Boot Camp, but I've never had issues with this approach in the past so I'm wary of just giving up and reinstalling Windows again will be massive hassle because I no longer have a SuperDrive and last time it refused to install from USB.
Anyone have any idea what's going on? It seems like the sort of issue Disk Utility should just handle, at least in Recovery mode, but it's not playing ball. It also doesn't seem like a massive problem since my files all look fine and performance is OK, so I'm reluctant to do anything major.
I'll update with a shot of the drive in Disk Management from Windows in a few minutes, in case that sheds light on anything. Thanks!

Similar issue here. I manually partitioned my hard disk for triple boot (using Gparted on Linux), then everything was just fine until I ran bootcamp, to do something as simple as create a boot USB.
I get the same error as a result and have to work my way into booting, by resorting first to a Linux live USB, then restarting from the live USB, to finally reach my rEFInd boot manager, or whichever boot manager should be initialized at startup.
I suppose that the cause in my case is that some operation "scratched" the protective MBR. See this:
http://www.mactech.com/articles/mactech/Vol.23/23.03/APMtoGPT/index.html
I am hoping to fix it using an external Yosemite installation media: see this guide -
http://www.macworld.com/article/2367748/how-to-make-a-bootable-os-x-10-10-yosemi te-install-drive.html
And as a last resort to reinstall.
I'll admit I am negatively surprised. I need this computer for professional reasons, and for the sake of "preserving the integrity of OSX", measures defined by Apple instead tend to make partitions far easier to damage. And this problem seems to affect a number of users.
As for what I have to go through to fix it: a 5GB download, during which I have to register my credit card to the Apple Store. "Pay first, get your free software next."
IF Disk Utility can fix it, from the external media, then fair enough. The hassle is unpleasant but it files as "a choice".
Otherwise you can file it safely under software design calamity.

I am creating a web form from a template and I need to change a field. It is just a text field at the moment but I need to change it to a field that the customer can fill in. How do I do this?

I am creating a web form from a template and I need to change a field. It is just a text field at the moment but I need to change it to a field that the customer can fill in. How do I do this?

See this thread:
http://answers.acrobatusers.com/Is-add-instructional-text-text-field-disappear-clicked-q19 5078.aspx

MacBookPro SSD Error- ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.

MacBook Pro OS x Mavericks. I have Sandisk 256GB SSD and I am getting a below error message.
ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.
Does anyone know how to resolve this error and fix it ? unfortunately I don't have a Time Machine backup. Thanks!

Have you tried to run the verify/repair permissions and verify/repair disk through the recovery disk? If that didn't work then I would reinstall the OS after backing up. If that still doesn't work I would take it in.

Need to add more field in the selection screen in tcode crm_dno_monitor

Hi,
In the transaction code crm_dno_monitor, i need to add extra fields in selection screen. Do we have any way to add fields in the standard tcode crm_dno_monitor.
Thanks
Prasad

If you need to add 5 fields on ticket screen then use EEWB enhancement.
The ticket screen transaction is crmd_order which even opens up after you double click the ticket no from crm_dno_monitor report list.
for crm_dno_monitor you can have the BADI CRM_DNO_MONITOR which will add later the column for the fields which you can add using EEWB
Check the following blog which guide you for custom field creation using EEWB
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii

I need to add one field Pers. sub area for Actions screen

Normally, we will have Position, Pers. area, Emp group and Emp sub group in Actions screen. Now I want to add one more field to that screen, what is the navigation?
Can anybody help me please.
Regards,
Pavani.

hi,
pavani. If i understood right, you need to add a field which is not listed in the module pool related to the screen you have to create a new field, here you can hide or make optional or intialize the field for the info types the table no T588M.
let me know whether this is correctly answered or not
regards,
madhu

Need to add custom fields in Report RM06EN00 ( Tcode ME2N ) in the Output

Hi,
MY requirement is i need to add 10 custom fields in the standard program RM06EN00 whos tcode is ME2N.
i have appended the fields in the EKKO table and they r now available in the dynamic selection screen of the report RM06EN00.
But i need to display this fields in the output and these fields should also be available in the change layout of the ALV report which is displayed when u click on the change button after pointing the cursor on the PO number.
I am looking out for any enhacement though which this requirement can be met. however my second option is to copy the standard report to a z program and modify it. but i think it will not going to be east and it may take a lot of time..
Need both advice and answers for this soon.
Thanks in advance.
Best Regards,
Fardeen

If you have want to add fields in Field catalog from se11 Add fields in this structure MEREP_OUTTAB_PURCHDOC using append structure and activate and execute ME2N with BEST_ALV IN SCOPE LIST U WILL find in change layout.

In mapping need to concatenate 10 fields

Similar Messages

Maybe you are looking for